Contents
The Best Filament Dehydrator of 2023 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Filament Dehydrator of 2023. Check our ranking below.
2,204 Reviews Scanned
- 【Upgraded Design】Creality Filament Dry Box 2.0 heats up quickly and has a built-in fan that circulates the hot air through 360° inside the chamber, evenly heating the entire chamber. It can be heated to 65°C within 15 minutes. We have added thermal insulation cotton on the dryer box inner wall to keep warm and anti-scald when printing. Dryer box input voltage: 110V 50/60Hz
- 【Improved Print Quality】3D printing filaments are hygroscopic, moisture can cause printing failure. After using filament dryer box, it can effectively solve the problems of drawing, clogging, and poor adhesion of the filaments during printing and improve print quality
- 【Easy to Use】Creality filament storage box requires no assembly and can be used right out of the dry box. Display screen and knob make it easy to operate. Real-time humidity monitoring and drying hours are displayed via a countdown timer, allowing you to track drying conditions. After drying, it is best to store the filament in a vacuum bag to keep it dry and ready for use
- 【Personalized Drying Time/Temperature Setting】You can set different drying temperatures and time to dry the filaments fully according to different 3D filament type, ambient temperature, humidity and other factors. Adjustable temperature range 45℃~65℃, and the time setting range is 0~24 hours
- 【Wide Compatibility】Creality filament dryer compatible with most 1KG spool 3D Printer filament. It can perfectly fit filament diameters of 1.75mm/2.85mm. And can be used with a variety of filaments, such as PLA, PLA+, PETG, TPU, ABS, ASA, PP, PC,PA(nylon). Pairing with Teflon tubes can make the filament feeding smoother
- Large Storage Volume -Filament Dry Box Inner Size: 9.29*6.49*9.13 inch. Comgrow dryer box can store 2 rolls of 1kg spools, compatible with PLA ABS SILK filament. Works perfectly with all standard filament diameters 1.75mm/2.85mm.
- Setting Notes - Set the temperature and duration after turning on the filament dehydrator. The machine will work only when the work state is displayed on the screen. If the work mode is not displayed, the motherboard will automatically shut down after 3 minutes. If you have any unsolvable problems with the COMGROW filament dryer box, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- Filament Dryer and Remove Moisture - Comgrow 3d printer filament dryer box is designed to keep filament dry and remove moisture from kinds of filaments. Internal heating during printing provides a dry storage environment for 3D printer filaments and keeps the filament dry. Avoid entanglement, clogging, poor adhesion, and layer migration caused by the dampness of the printing wire. (Note: Only used for the drying of 3D printer Filament)
- Real-time Monitoring of Temperature and Humidity - Adjustable temperature range 40°~ 50 °C, the maximum temperature is only 50°C,。setting time from 6 hours to 12 hours. A 2-inch LCD screen and touch buttons make it easy to operate, it is more comprehensive and clear of the information display. Press the power button to start, and hold the function button(M) to change the dry time and the temperature setting.
- Great Sealed Filament Dry Box -The outlet structure adopts a silicone cable sheath and Teflon tube, the outlet is smooth and can be covered with a plug when not in use. The upper cover has a snap button structure, and the sealing performance is good.When the drying box is working, the sealing hole needs to be opened to allow moisture to drain out. When not in use, the sealing hole needs to be closed to keep the consumables dry.
- Four-Spool Filament Dryer Box - SUNLU S4 is the first filament dryer box capable of accommodating four 1kg spools simultaneously. It is equipped with eight filament holes and PTFE tubes, meeting the demands for drying multiple filaments and enabling concurrent printing with multiple printers.
- Fast Heating & Drying Evenly - The SUNLU S4 filament dryer is equipped with a PTC heating element and a triple-fan configuration. The interior heat is efficiently circulated with three fans, making the heating process more even. Additionally, the S4 filament dry box achieves rapid heating up to 70 °C in record time. The robust 350W PTC heater is 6.9 times more powerful than the SUNLU S2, ensuring an accelerated and efficient filament drying experience.
- Auto Humidity Control - The SUNLU FilaDryer S4 incorporates a high-precision humidity sensor, displaying real-time interior humidity. Even when the filament dryer is in standby, it will automatically activate when the interior humidity reaches or exceeds 50%, preventing secondary moisture exposure. Thus, it can also serve as your filament storage box.
- Easy to Use - The adjustable temperature range is 35°C to 70°C, with a setting time from 0 to 99 hours. This 3D printer filament dryer features a large touch screen, providing a tablet-like operation experience. It also comes with pre-configured temperature and drying time settings for commonly used filaments such as PLA, ABS, PETG, as well as PA and PC. This reduces setup complexities and enhances your user experience.
- Universal Compatibility - The SUNLU S4 filament dehydrator is compatible with PLA, PLA+, PETG, TPU, ABS, PA, PC, Nylon, and other high-end 3D filaments. It works perfectly with all standard filament diameters: 1.75mm, 2.85mm, 3.00mm.
- 【Remove Excess Moisture】3D printer filaments are hygroscopic, moisture would cause printing failure. Sovol SH01, a great addition to 3d printer, can remove excess moisture, keep your filament dry and bring you better prints. The surface of prints will be smoother, the layer adhesion increased. No more brittle PLA, PETG, ABS filament
- 【Real-time Monitoring of Temp and Humidity inside】Displays the humidity and temperature in the dry box in real time. Setting temperature 40 °, 45 °, 50 ° C and setting time from 6 hours to 12 hours. If you use SH01 in a room with room temperature under 16℃, the temperature in the dryer box would not come up to 50℃. But do not worry, this would not decrease drying effect
- 【Excellent Power-off Drying Mode】Silicone & PTFE seal makes it possible to store filaments for a long time without power and protects your filaments from moisture and dirt. You can put 4 bags of desiccants (not included in the package) inside the dryer box to improve drying efficience & quality
- 【Large Capacity】 Sovol dryer box can store 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm. Please open the PTFE seals on the top of the box during heating for Moisture evaporation
- 【Heating More Evenly】 The unique design of the built-in fan in the box is based on the principle of modynamics of air, makes the filament heated more evenly. SH01 makes drying more efficient. Any questions about the product please feel free to let us know. Our technical support team will provide service as soon as we can
- Two Rolls Capacity Design: It contains 2 rolls of 1 kg filaments and is also equipped with 4 filaments holes and PTFE pipes to meet the needs of users drying a wide range of filaments as well as 2 printers at the same time
- Double PTC 360° Hot-air Heating: The dryer quickly heats with a built-in fan, circulating hot air 360° for uniform heating, effectively drying moisture filaments and improving printing results
- Advanced PTC Heating Technology: Our filament dryer employs a unique 80W PTC heater to warm up the space, a feature that sets us apart in the market. Unlike most filament dryers that use a PI heating pad and often result in uneven drying, our model with the PTC heater ensures uniform drying. This PTC heater is not only durable and energy-saving, but also eco-friendly
- LCD Touch Screen: The Creality Space π Filament Dryer comes with a 4-inch touch screen for easy operation, making it simple for you to track drying conditions
- Fast Filament Selection: It has fast temperature settings for different filament types, supporting up to 12 types of filaments, including common and high-performance composite like PLA-CF,PA-CF, ASA. Of course, you can also freely adjust the temperature between 45°C and 70°C
Last update on 2025-07-04 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Filament Dehydrator?
Do you get stressed out thinking about shopping for a great Filament Dehydrator? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Filament Dehydrator, which is why we have assembled a comprehensive list of the greatest Filament Dehydrator available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Filament Dehydrator that you consider buying. Your questions might include the following:
- Is it worth buying an Filament Dehydrator?
- What benefits are there with buying an Filament Dehydrator?
- What factors deserve consideration when shopping for an effective Filament Dehydrator?
- Why is it crucial to invest in any Filament Dehydrator, much less the best one?
- Which Filament Dehydrator are good in the current market?
- Where can you find information like this about Filament Dehydrator?
We’re convinced that you likely have far more questions than just these regarding Filament Dehydrator, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Filament Dehydrator, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Filament Dehydrator. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Filament Dehydrator buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Filament Dehydrator currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Filament Dehydrator has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Filament Dehydrator?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Filament Dehydrator.
- Customer Ratings: Number ratings grade Filament Dehydrator objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Filament Dehydrator.
- Product Quality: You don’t always get what you pay for with an Filament Dehydrator, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Filament Dehydrator is should be an indication of how long it will work out for you.
We always remember that maintaining Filament Dehydrator information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Filament Dehydrator is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
FAQ:
Q: What is the strongest 3D printer filament?
A: Alloy 910, the latest 3D printing filament by taulman 3D is claimed to be strongest filament in the market, which has the capability to be used in the industry levels.
Q: What are the types of 3D printer filaments?
A: A 3D filament is a 3D printer plastic that is used to make three dimensional printing. In 3D printing, the most popular filaments are ABS (Acrylonitrile Butadiene Styrene) and PLA (Polylactic Acid).
Q: What is a filament dryer?
A: The PrintDry filament dryer is an in-line filament dryer, which is designed to dry and to feed the filament into a 3D printer at the same time. The migration of moisture into the filament occurs over time and will eventually slow and stop when the moisture content reaches a state of equilibrium with that of the surrounding air.