Contents
The Best Fluke Intellitone Pro 200 of 2023 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Fluke Intellitone Pro 200 of 2023. Check our ranking below.
2,364 Reviews Scanned
SaleRank No. #1
Fluke Networks MT-8200-60-KIT IntelliTone Pro 200 Probe and Toner, Multicolor
- IntelliTone digital toning eliminates noise and false signals
- SmartTone analog toning precisely isolates individual wire pairs
- Locates cables safely and effectively on active networks
- Verifies twisted pair installation with visual end to end continuity test
- Probe detects digital signal and 1 kilo hertz signal from the analog toner
SaleRank No. #2
Fluke Networks MT-8200-63A IntelliTone Pro200 Probe
- Detects IntelliTone digital signals on active networks and 500 to 1200 Hertz analog signals on inactive networks to locate, trace, and isolate copper cabling
- Identifies detected signals audibly and with 8 LEDs that light successively as the signal strength increases for prompt isolation of a single cable within a bundle
- Sync LED shows battery strength at power up and confirms reception of IntelliTone signals
- Available with a cable map function for validating RJ11 and RJ45 connectors by testing continuity and finding wiring faults on all 4 pairs of UTP and STP twisted pair cabling
- Turns off automatically after 1 hour of inactivity
SaleRank No. #3
Fluke Networks IntelliTone Pro200 Tone Generator (MT-8200-61-TNR)
- Verifies and troubleshoots virtually any copper cabling in data com networks, identifying the type of service and testing for continuity
- Supports VDV cable types including RJ45, RJ11, coaxial, and bare wire (banana jacks accommodate alligator clip test leads)
- Generates IntelliTone digital signals for locating data cabling on active networks, and Smart Tone analog signals for locating voice, audio, and video cabling on inactive networks
- Country of origin: Malaysia
SaleRank No. #4
Fluke Networks MT-8200-60-KIT IntelliTone Pro 200 Toner and Probe Kit and MT-8202-05 IntelliTone Toner & Probe Soft Case bundle
- IntelliTone digital toning eliminates noise and false signals
- SmartTone analog toning precisely isolates individual wire pairs
- Top-loading
- Belt Loop
Rank No. #5
RLSOCO Carrying Case Replacement for Fluke Networks MT-8200-60-KIT IntelliTone Pro 200 Toner and Probe Kit.
- · ►Great Compatibility-- This carrying case holds Fluke Networks MT-8200-60-KIT perfectly and also keeps other compatible tools when removing the soft foam.
- · ►Top Materials -- Instead of using the cheap materials, our case using the high quality and eco-friendly materials to prevent your tools from the horrible smell. The outside covers is the nice 1680D fabric and the lining using the high-density EVA,which make it sturdy and durable.
- · ►Excellent Protection -- It is specially designed with the molded compartments that keep Fluke network kit orderly and neatly, along with a soft pad to cover the device, which protects your tools from scratches, shock, dust and wet!
- · ►Considerate design- Upon the bottom case, there is a large pocket enlarging the spaces for probes and some essential tools with you. It’s a well-thought-out portable case for both carrying out and home storage.
- · ►Quality Assurance★-- Compared to the market products, our case is made of green materials.All our products are using qualified Materials,which Rohs certificated! Hard shell with two-year assurance.
Rank No. #6
Fluke Networks MT-8203-20 IntelliTone Test Leads w/ABN/PP for Pro 100/200
- U-shaped nose for blade-shaped terminals
- Notched jaw for gripping screw heads, bare wire or terminals
- Serrated teeth for gripping threaded or wire wrapped terminals
- Cluster of sharp needles for piercing small gauge wires (22-28 AWG)
Rank No. #7
Aenllosi Hard Carrying Case Replacement for Fluke Networks IntelliTone Pro 200 Toner and Probe Kit
- Aenllosi Hard Carrying Case replacement for Fluke Networks IntelliTone Pro 200 Toner and Probe Kit
- Features: Case is made of supreme quality, durable EVA, crush resistant, anti-shock, water resistant material provides adequate protection from bumps, scratches and splashes
- With Internal mesh pocket can store other accessories at your convenience
- Internal size: 9.2*5.8*1.7 inch, external size:9.7*6.5*2 inch, weight:200g.
- For sale is case only, device and accessories are not included.
Rank No. #8
co2CREA Hard Travel Case replacement for Fluke Networks IntelliTone Pro 200 Toner Probe Kit MT-8200-60-KIT
- co2CREA Hard Travel Case replacement for Fluke Networks IntelliTone Pro 200 Toner Probe Kit MT-8200-60-KIT
- The case is shockproof dustproof and water resistance, protect your favorite device from bumps dents and scratches
- Material: EVA, Color: Black
- For sale is case only (device and accessories are not included)
SaleRank No. #9
Fluke Networks MS2-KIT MicroScanner2 Copper Cable Verifier Kit, Troubleshoots RJ11, RJ45, Coax, Tests 10/100/1000Base-T, and Voip, Includes IntelliTone Pro 200 & Remote ID Kit
- Copper cable verifier kit for testing voice/data/video with integrated RJ11, RJ45, and coax cable, test ports support low voltage testing with no need for adapters, ensures high quality installations and expedites cable problem resolution in active network environments
- Includes MicroScanner2 cable verifier with detachable wire map adapter, IntelliTone 200 Digital Probe, patch cords, remote IDs, alligator clips, user guide, (2) AA and (1) 9V alkaline battery, accessory pouch, duffel bag, 1 year warranty
- Oversized backlit LCD screen displays clear results in bright light or complete dark with intuitive icons, shows 4 test modes at once: Graphical wire map, pair lengths, distance to fault with TDR, cable ID, and far end device, detects 10/100/1000 Ethernet, POTS, and PoE
- Cable tests include length (460 meter or 1500 feet with resolution to 0.3 meter or 1 foot), wire map to TIA 568A/B standards, remote ID locators. Coax F connector for 75 ohm, 50 ohm, 93 ohm cables, PoE Detection: Solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices to rule out power as source of problems
- Rugged housing with integrated rubber easy grip holster and magnetic strap, locates virtually any cable or wire pair with IntelliTone digital and analog toning
SaleRank No. #10
Fluke Networks 26000900 Pro3000 Tone Generator and Probe Kit with SmartTone Technology, Blue
- Tone and trace wire on non active networks; SmartTone technology provides 5 distinct tones for exact pair identification; Battery: 9 volt alkaline
- Sends a loud tone up to 16 kilometer (10 miles) in most cables and provides 5 distinct cadences for isolating individual wire pairs
- Precise SmartTone technology provides five distinct tones for exact pair identification, replaceable tip
- Pro3000 unfiltered probe with ergonomic sleek design, loud speaker is audible in noisy locations, 3.5 millimeter headphone jack
- Push button switch selects Solid, Alt and Off
SaleRank No. #11
Fluke Networks - 5018513 MS-POE-KIT MicroScanner Copper Cable Verifier & PoE tester for RJ-45 Category 5-6A Ethernet Cables, Includes IntelliTone Pro 200 & Remote ID Kit
- Complete kit for copper cabling and PoE verification and troubleshooting, with IntelliTone Pro 200 Probe, for Power over Ethernet devices such as VOIP phones, cameras, lighting, 802.11a/b/g/n/ac/ax, detects voltages from active 802.3at/af/bt, negotiates and solicits PoE/UPOE, PoH from active sources, shows maximum class of power and voltage available to 90 Watts
- Includes MicroScanner POE (Power over Ethernet) cable verifier with detachable wiremap adapter, remote identifiers No. 2-7, IntelliTone Pro 200 Probe, RJ45 cord and adapters, magnetic strap, deluxe duffle bag, test kit pouch, (2) AA and (1) 9V alkaline batteries, user guide, 1 year warranty on testers
- Oversized backlit LCD screen displays clear results in bright light or complete dark with intuitive icons, supports Class 1 to 8 PoE, detects network switch speed capabilities up to 10G Ethernet, cable length, wiremap, cable ID, and distance to fault, detects POTS
- Test voice/data/video cables with integrated RJ45 which support low voltage testing with no need for adapters, ensures high quality installations and quick troubleshooting in active network environment, measures length (460 meter or 1500 feet with resolution to 0.3 meter or 1 foot), wiremap to TIA 568A/B standards, included remote ID locators
- Rugged and ergonomic easy grip rubber design with strong magnetic strap, locates virtually any cable or wire pair with IntelliTone digital and analog toning, probe included
SaleRank No. #12
Fluke Networks CIQ-KIT Copper Qualification Tester Kit Qualifies and Troubleshoots Category 5-6A Cabling for 10/100/Gig Ethernet, Coax, and VoIP, Includes IntelliTone Pro 200 & Remote ID Kit Black
- Qualifies cabling performance for 10/100/Gig Ethernet, tests all copper media cabling: twisted pair (Category 5-6A), coax, and audio
- Includes CableIQ Qualification Tester with detachable wiremap, IntelliTone 200 Digital Probe, Remote IDs No. 2-7, (2) RJ45/RJ45 patch cords, USB cable, coax 'F' push on adapter, 75 ohm coax patch cord, RJ45/11 universal coupler, RJ11/RJ11 patch cord, user guide, (4) AA and (1) 9V alkaline batteries, test accessory soft pouch, duffel style bag, 1 year warranty on testers
- Advanced troubleshooting features: length, distance to fault, graphical wire mapping, opens, shorts, power over Ethernet (POE) detection
- Works on live networks to provide Ethernet switch detection and device configuration, isolate network issues from physical cabling issues
- Locate and trace cables with digital toning technology with included IntelliTone 200 Digital Probe, discover what is at the end of any cable and display device configurations (speed/duplex, pairing)
Rank No. #13
Fluke Networks MT-8202-05 IntelliTone Toner & Probe Soft Case, Black/Yellow
- Top-loading
- Belt Loop
- Vinyl
- Features:For INTELLITONE TONER/PROBE
Rank No. #14
Fluke Networks CIQ-100 Copper Qualification Tester, Coax and Voip & MT-8200-60-KIT IntelliTone Pro 200 Toner and Probe Kit, IntelliTone Probe and Toner Kit
- Qualifies cabling performance for 10/100/Gig Ethernet, tests and troubleshoots all copper media cabling: Twisted pair (Category 5 6A), coax, and audio
- Includes CableIQ Qualification Tester with detachable wire map adapter, (2) RJ45/RJ 45 patch cord, USB cable, coax 'F' push on adapter, user guide, (4) AA batteries, soft carry case, 1 year warranty
- Advanced troubleshooting features; Length, distance to fault, graphical wire mapping, opens, shorts, power over Ethernet (POE) detection
- Works on live networks to provide Ethernet switch detection and device configuration
- GREAT FOR ASSET MANAGEMENT: Print Code 39 and Code 128 bar codes on 3/4" (19mm) wide labels
Rank No. #15
D YEDEMC Mini-Pro 1310/1550nm SM OTDR Mulit-Function Tester Built in OPM/OLS / RJ45 Test/VFL Test Rang 5m-60Km Dynamic Range 24dB/22dB Connector UPC with FC/APC-FC/UPC-SX (YD-3000-UPC)
- Functions: For evaluating FTTx and access network construction and maintenance, identifying fiber breakpoints, measuring cable length, and calculating relative optical power losses.
- Parameters：Mini-Pro OTDR Test Wavelength 1310/1550nm,Test Range 5m~60km,Test Unit is km. Dynamic Range 24dB/22dB (can't test spliter,if test the spliter,the Dynamic need more than 42dB) .Connector FC/UPC (Interchangeable SC、ST)
- Built-In: 3.5 inch Color Display (not touch);OTDR, Event Map, Power Meter, Light Source, VFL, Cable Length Measurement Tool, Cable Tracker, and RJ45 Sequencer
- Internal Storage: Micro USB Data Interface; External storage TF Card. Analysis Software included for further data analysis or processing,(Note:The Analysis Software need install on PC,Using the Analysis Software open print the test result and print)
- Please make sure you are a professional before purchasing. If you can't test, please contact us. Our products have been strictly tested before leaving the factory and will not be unusable. Because of the accuracy of the product, some scenarios cannot be used. You need to buy products with higher accuracy, not because our products have problems.
SaleRank No. #16
Fluke Networks LIQ-KIT LinkIQ Cable + Network Tester Kit, Black
- Cable Performance testing up to 10GBASE-T via frequency-based measurements
- Network features including: IPv4 and v6 ping, nearest switch diagnostics (IP address, name, port / VLAN number, and advertised data rates).
- Ethernet Alliance certified PoE Verification – Detects the PoE class (1-8) and power, and performs a load test of available PoE from the connected switch
- Displays cable length, wire map, and distance to open or short
- Manage results and print reports from LinkWare PC
SaleRank No. #17
Fluke Networks MS2-100 MicroScanner2 Copper Cable Verifier with Built-In IntelliTone Toning, Troubleshoots RJ11, RJ45, Coax, Tests 10/100/1000Base-T, and Voip,yellow
- Copper cable verifier for testing voice/data/video with integrated RJ11, RJ45, and coax cable, test ports support low voltage testing with no need for adapters, ensures high quality installations and expedites cable problem resolution in active network environments
- Includes MicroScanner2 cable verifier with detachable wire map adapter, user guide, (2) AA alkaline batteries, carry pouch, 1 year warranty
- Oversized backlit LCD screen displays clear results in bright light or complete dark with intuitive icons, shows 4 test modes at once: Graphical wire map, pair lengths, distance to fault with TDR, cable ID, and far end device, detects 10/100/1000 Ethernet, POTS, and PoE
- Cable Tests include Length (460 meter or 1500 feet with resolution to 0.3 meter or 1 feet), wire map to TIA 568A/B standards, remote ID locators. Coax F connector for 75 ohm, 50 ohm, 93 ohm cables; PoE detection: Solicits and detects the presence of 802.3af compatible PoE (Power over Ethernet) devices to rule out power as source of problems
- Rugged housing with integrated rubber easy grip holster and magnetic strap, locates virtually any cable or wire pair with Intellitone digital and analog toning, probe sold separately
Rank No. #18
Aproca Hard Storage Travel Case for Fluke Networks Pro3000 Tone Generator and Probe Kit
- Eco-friendly Material: Made of High-density EVA and 1680D Material, premium Hard EVA to provide durability and a long-lasting performance.
- Perfect Fit: Specially designed for Fluke Networks Pro3000 Tone Generator and Probe Kit.
- Convenient Design: Comfortable hand grip for easy portability,Comes with specially mesh pocket for other accessories,Smooth but strong double zipper are easy for opening and closing, giving you a better using experience.
- Great Protection: Stylish and Durable,prevents any damages or scratches caused by accidentally bumping,dropping, secures the device in good condition on travelling or outdoors.
- For sale is case only(device and accessories are not included).
SaleRank No. #19
Klein Tools VDV500-820 Cable Tracer with Probe Tone Pro Kit for Telephone, Internet, Video, Data and Communications Cables
- PROFESSIONAL GRADE TONE GENERATOR: Includes a professional-grade analog tone generator and tracing probe for accurate and efficient tracing of open-ended, non-energized wiring
- VERSATILE TONE CADENCES: Toner-Pro features 5 distinct tone cadences and can transmit signals over 1,000 feet, ensuring reliable tracing capabilities
- SECURE WIRE ATTACHMENT: Rugged Angled Bed of Nails (ABN) clips securely attach to wires, providing a stable connection during tracing operations
- EASY CONNECTIONS: RJ11 plug easily connects to telephone and RJ45 data jacks, allowing for convenient toning of wire pairs
- CONTINUITY AND POLARITY TESTING: Toner-Pro tests for continuity and polarity, with clearly labeled LEDs indicating the results for easy interpretation
Last update on 2023-08-02 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Fluke Intellitone Pro 200?
Do you get stressed out thinking about shopping for a great Fluke Intellitone Pro 200? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Fluke Intellitone Pro 200, which is why we have assembled a comprehensive list of the greatest Fluke Intellitone Pro 200 available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Fluke Intellitone Pro 200 that you consider buying. Your questions might include the following:
- Is it worth buying an Fluke Intellitone Pro 200?
- What benefits are there with buying an Fluke Intellitone Pro 200?
- What factors deserve consideration when shopping for an effective Fluke Intellitone Pro 200?
- Why is it crucial to invest in any Fluke Intellitone Pro 200, much less the best one?
- Which Fluke Intellitone Pro 200 are good in the current market?
- Where can you find information like this about Fluke Intellitone Pro 200?
We’re convinced that you likely have far more questions than just these regarding Fluke Intellitone Pro 200, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Fluke Intellitone Pro 200, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Fluke Intellitone Pro 200. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Fluke Intellitone Pro 200 buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Fluke Intellitone Pro 200 currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Fluke Intellitone Pro 200 has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Fluke Intellitone Pro 200?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Fluke Intellitone Pro 200.
- Customer Ratings: Number ratings grade Fluke Intellitone Pro 200 objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Fluke Intellitone Pro 200.
- Product Quality: You don’t always get what you pay for with an Fluke Intellitone Pro 200, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Fluke Intellitone Pro 200 is should be an indication of how long it will work out for you.
We always remember that maintaining Fluke Intellitone Pro 200 information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Fluke Intellitone Pro 200 is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
FAQ:
Q: What is the intellitone Pro 200 Lan toner and probe?
A: The IntelliTone™ Pro 200 LAN Toner and Probe Series from Fluke Networks is the first network cable toner tracer and probe to offer digital and analog signaling all in one network toner and probe. That means it’s equipped with the most powerful cable tracing and location technologies for any work environment.
Q: What kind of toner and probe does fluke use?
A: Fluke Networks IntelliTone Pro 200 LAN Toner and Probe Kit finds the cables others can’t. The IntelliTone Pro 200 LAN Toner and Probe is the first network cable toner and probe to offer digital and analog signaling all in one network toner and probe.
Q: What does sync do on intellitone Pro 200?
A: Visually steps through wiremap tests 2. SYNC indicates detection of IntellTone signal and shows battery status at power-up 3. Digital detection mode: lets you locate cables at a distance 4. Digital detection mode: lets you isolate cables in bundles or at patch panels 5.
Q: What kind of signal does intellitone pro use?
A: IntelliTone Pro changes that by combining cutting-edge digital and analog signaling to locate and verify virtually any copper cable, regardless of application or environment. IntelliTone Pro’s digital encoded signal should primarily be used on high-grade data cabling (Cat 5e/6/6a), and in active network environments.