The Best Ford 73 Injector Cup Replacement of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Ford 73 Injector Cup Replacement of 2023. Check our ranking below.

2,033 Reviews Scanned

SaleRank No. #1

SCITOO for Ford 1994-2003 7.3L Injector Sleeve Cup Installation Tool Kit Replacement

Compatible Vehicles: for Ford 1994-2003 7.3 Powerstroke; Navistar T444E, DT466E; for Caterpillar 3126 3126B 3126E Diesel Engines; for F-Series; for E-Series; for Excursion.
SCITOO Injector Sleeve Cup Installation Tool Kit are manufactured to the OE specification for exactly fitment to repair your worn injectors. Direct replacement, which can work smoothly, can help you save a lot of money. Reference OE number F4TZ9for F538A, 1814376C1, O-Rings: CM5010, 1833564C92, 1833564C91, 1823492C97, F8TZ9229AA, XC3Z9229AB
SCITOO Injector Sleeve Cup Installation Tool Kit have went through vehicle try-on testing to ensure the quality is qualified and durable.
The three claw extractor has a strong structural design. Turning the small wrench gently can produce a strong pulling force. It can disassemble all sleeve bearings with a diameter of 1/2-2.
Important Note: We provide 1 year warranty for you. When doing automotive maintenance always make sure all the tools are correctly used . Any question or problem, feel free to contact us.

Rank No. #2

labwork E541-73TK Injector Sleeve Cup Removal and Install Tool Replacement for Ford E-Series F-Series Excursion 1994-2003 7.3L

Fitments: Replacement for Ford F-Series 1994-2003, Replacement for Ford E-Series 1994-2003, Replacement for Ford Excursion 1994-2003
Fitments: The Injector Sleeve Cup Removal and Install Tool Replacement for Navistar T444E DT466E and Replacement for Caterpillar 3126 3126B 3126E diesel engines
Part Number: E541-73TK
Package List: 1x Injector sleeve cup removal tool ,1x Install tool
High Quality: Made of High-quality material for long-lasting durability

Rank No. #3

JDMSPEED New Injector Sleeve Cup Removal Installation Tool Kit F4TZ9F538A Replacement For Ford 1994-2003

High Speed Steel Tap Used in The Removal Tool Is the Highest Quality Available
This Job Can Be Done with The Cylinder Heads On, Works Great
Small Enough to Enable You to Change Even the Hard To Get At Cups At The Rear Of The Engine
It Will Stay Sharp and You Can Use This Tool Hundreds of Times
Replace Part Number: Injector Cup OEM Number: F4TZ9F538A, 1814376C1, F4TZ-9F538-A; Injector O-rings OEM Number: XC3Z9229AB, XC3A-9229-AB, 1833564C92, 1823492C97, F8TZ9229AA, 1833564C91, CM5010

Rank No. #4

kipa Injector Sleeve Cup Removal Installation Tool Kit F4TZ9F538A Replace for Ford 7.3L 1994-2003 1814376C1, 1833564C92, 1833564C91, 1823492C97, F8TZ9229AA, XC3Z9229AB

Top Quality Injector Sleeve Cup Removal Installation Tool Kit: Well-machined, strictly tested before packing, made of sturdy, tough prime materials that Car enhanced durability and superior reliability.
MPN: Replace for OE Part Number F4TZ9F538A,1814376C1,1833564C92,1833564C91,1823492C97,F8TZ9229AA,XC3Z9229AB
Fitment:Replace for 1994-2003 Ford Powerstroke 7.3L,Navistar T444E,DT466E and Caterpillar 3126,3126B,3126E Diesel Engines; 1994-2003 Ford F-Series 7.3L, 1994-2003 Ford E-Series 7.3L, 1994-2003 Ford Excursion7.3L
Package Including: 1x fuel injector sleeve installer tool, 1x fuel injector sleeve remover tool, 8x fuel injector sleeve cup, 48x injector seal and ring kit.
Other Tools on the market Do Not Have Hardened Threads on Their Removal Tool, These Tools Often Are Too Dull to Finish the Job. This Job Can Be Done with The Cylinder Heads On, Works Great.Small Enough to Enable You to Change Even the Hard To Get At Cups At The Rear Of The Engine. High Speed Steel Tap Used in The Removal Tool Is the Highest Quality Available It Will Stay Sharp and You Can Use This Tool Hundreds of Times. Please do match the OEM Code and the fitment, Directly Fit

Rank No. #5

HQPASFY Injector Sleeve Cup Removal Installation Tool with O-Ring Seal Kit Compatible with 1994-2003 Ford 7.3L Powerstroke Navistar T444E DT466E Replaces# 1814376C1, F4TZ9F538A, 1823492C97

【HIGH QUALITY】Long life-span matters, that is why our injector o-ring kit are made from wear resistance rubber to ensure it can work a long time
【PREMIUM QUALITY】Fuel Injector sleeve removal kit is made of strong and tough quality materials, which enhance the durability and superior reliability
【FITMENT】Removal tool & install kit compatible with 1994-2003 Ford 7.3 Powerstroke丨Navistar T444E, DT466E丨Caterpillar 3126 3126B 3126E Diesel Engines丨F-Series丨E-Series丨Excursion
【REPLACES#】OEM Injector Cup Number: F4TZ-9F538-A, 1814376C1, F4TZ9F538A. OEM Injector O-rings Number: XC3A-9229-AB, XC3Z9229AB, CM5010, 1833564C92, 1823492C97, F8TZ9229AA, 1833564C91
【24-MONTH WARRANTY】Exquisite craft, strict quality control and excellent after-sales service that is why our 7.3 injector worth your purchase

Rank No. #6

Injector Sleeve Cup Removal & Installation tool with Parts Kit For 1994-2003 Ford Powerstroke 7.3L and Navistar T444e

Save Time and Money -This Job Can Be Done with The Cylinder Heads On
Small - Small Enough to Enable You to Change Even the Hard To Get At Cups At The Rear Of The Engine
High Speed Steel Tap Used in The Removal Tool Is the Highest Quality Available
It Will Stay Sharp and You Can Use This Tool Hundreds of Times
Comes with Tools and Sleeves

Rank No. #7

KIPA Injector Sleeve Cup Removal Tool & install kit for Ford Powerstroke 6.0L 2003-2010 with 8Pcs Injector Sleeves 8Pcs Injector Orings Stainless Maintenance brush Durable # 3302

Top Quality Well-Manufactured Diesel Fuel Injector Cup Sleeve installation Removal Tool is an engine tool kit made from sturdy, tough prime fibrous Alloy materials that Trucks & Cars enhanced durability and superior reliability. Durable
A New must have for any shop working on Powerstroke 6.0L Engines, With Brush kit included, This Fuel Injector Sleeve Tool helps with the removal and installation of the injector cups without damaging the cup in the process.
Fitment: Replace for Ford Powerstroke 6.0L 2003-2010 Engines. All hardware has been coated for rust resistance as well as a rockwell hardness of over 62 to ensure a long life
Replace for OE Part Number 3302. KIPA Tool utilize the latest in metallurgical and coating technology it allows us to thread our removal tool into the damaged injector cup without creating any filings or chips to fall into your cylinders. The tool use bridges that are quickly fastened to the injector mounting holes.
Our design is engineered towards repeated shop use, and efficiently removing and installing the injector cups . Removing and installing the injector cups should be a surgical operation, not something requiring beating cups in with hammers and leaving brass filings from removing. KIPA designed our tools with tight clearances, and clean injector bores.

Rank No. #8

X AUTOHAUX 6.0L Diesel Nipple Cup Seals O-Rings Socket Kit for Ford 6.0L Oil Rails 2003-2007 High Pressure Oil Rail Fuel Rail Ball Tube Repair Kit 1/2" Drive Socket

[Fitment] for Ford 6.0L Oil Rails 2003 2004 2005 2006 2007
[1/2" Drive Socket] Made of Hardened 4140 Impact Grade Steel with great durability, impact and wear resistance, anti-rust.
[Sealing O-Rings] Made of quality material for durability. Attaches to the fuel injectors and high pressure oil rail, to reseal the high pressure oil rail.
[Function] Replace broken injector O-rings, this kit will help you to repair the oil rail leak without replacing the entire rail.
[Package] 1x 1/2" Drive Nipple Cup Socket, 8x O-Rings. Please confirm your car model and OE number before purchasing. Please check relevant operation video when you replace it.

Rank No. #9

Toolly Injector Sleeve Cup Removal & Installation Tool Kit Compatible with 1994-2003 Ford Powerstroke 7.3L and Navistar T444e

【COMPATIBILITY】 Injector sleeve cup removal installation tool kit Compatible with 1994-2003 7.3 Powerstroke And Navistar T444e Diesel Engines. (Please check if this item is compatible with your engine before purchasing)
【PACKAGE LIST】 This Fuel Injector Sleeve Installer Fits your needs to repair fuel injector. It comes with Fuel Injector Sleeve Installer In-Vehicle Alternative, Brushes and Sleeves.
【GOOD QUALITY】 The high-speed steel cone included in the disassembly kit is currently the highest quality.
【SMART SIZE】Small enough to allow you to change the hard-to-reach cup at the rear of the engine.
【DURABILITY】 It will stay sharp and you can use this tool hundreds of times.

Rank No. #10

Dorman 904-213 Fuel Injector Sleeve Compatible with Select Ford Models

Ideal replacement - this fuel injector sleeve is a direct replacement for the original equipment part on specified engines
Durable construction - this part is made from quality materials to resist damage from fuel and extreme temperatures
Cost-effective solution - offers original equipment quality at competitive price
Quality tested - this part has undergone extensive testing to ensure a quality fit and long service life
Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool

Rank No. #11

V-SEK Fuel Injector Sleeve/Cup Remove & Install Tool Set Compatible with Ford 6.0L 6.4L Powerstroke Engines 2003-2010

Fitment--Compatible with All 6.0L & 6.4L Powerstroke Engines 2003-2010.
Feature--If the separate tap is wears or breaks, it can be replaced at any hardware store at minimal cost versus replacing the entire tool. The shortness of tool allows this to be easily done in the engine compartment.
Material--Made of quality advanced blackening hard steel, strong and durable, ultra precision design, high precision and hardness, long service life.
Easy Use--1. Thread the tap part into the injector cup and turn the bolt down. 2. Put the removal into the injector cup and attach them to the cup, then tighten the nut on the tool to pull the cup out. 3. Place the injector cup over the end of the installer, then place it back into the injector hole and hit it with a hammer until you hit solid ground.
Kits Include--1pcs Fuel Injector Sleeve/Cup Remove & Install Tool Set.

Rank No. #12

E-cowlboy for 6.0L/6.4L Powerstroke Fuel Injector Sleeve/Cup Remove & Install Kits for All Ford 6.0L & 6.4L Engines 2003-2010

Great Compatibility — Fit for All Ford 6.0L and 6.4L Powerstroke Engines 2003 2004 2005 2006 2007 2008 2009 2010.
High Quality — Advanced blackening hard steel process, durability, ultra-precise design meets the requirement of high precision and hardness and a much longer service life.
Benefit — The separate tap could be replaced at any hardware store at minimal cost if it wears out or breaks. The shortness of the tool allows this to be done in the engine compartment very easily.
Easier Work — 1. Thread the Tap portion into the injector cup then crank the bolt down. 2. Put the removal into the injector cup and holds them onto the cup, then tighten the nut on the tool to pull the cup out. 3. Place the injector cup over the end of the installer then place it back into the injector hole and hammer it until you hit solid ground.
If you're not 100% satisfied with our item, simply return it for a full refund in 30 days. Premium Support & 18 months' Warranty. Do not hesitate, you take no risk to purchase in E-cowboy!

Rank No. #13

CTA Tools 3876 Fuel Injector Remover - Compatible with Ford 6.7L Powerstroke

Removes the fuel injector on Ford 6.7L Power Engine
Services 2011-2013 Ford F-250, F-350, F-450, F-550 & Super Duty
Compare to Ford Factory Tool 310-230

Rank No. #14

Injector Sleeve Cup Removal & Installation Tool Kit Replacement for T444E WT73PD ZTSE4303 XC3Z9229AB Compatible with 1994-2003 For-d Powerstroke 7.3L and Navistar T444e

Fitment: Fit for 1994-2003 7.3 Powerstroke And Navistar T444e Diesel Engines.
Replacement for Part Number:T444E WT73PD ZTSE4303 XC3Z-9229-AB XC3Z9229AB CM-5010 1833564C92.
Small - Small Enough to Enable You to Change Even the Hard To Get At Cups At The Rear Of The Engine.
High Speed Steel Tap Used in The Removal Tool Is the Highest Quality Available.
It Will Stay Sharp and You Can Use This Tool Hundreds of Times.

Rank No. #15

2pcs Injector Sleeve Cup Bore Seat Cleaning Brush Kit Compatible with Ford Powerstroke 7.3L 6.0L 6.4L 6.7L 1994-2018, Caterpillar 3126 C7 C9, Navistar Replace AP0084 AP0085 3252

Compatible with : Ford 4.5L LCF 6.0L 6.4L 6.7L and 7.3L Powerstroke, Caterpillar(CAT) 3126 C7 C9 , Navistar T444E DT466 VT365 VT275 , MaxxForce 5/7/DT/9/10/N9/N10 ,GM , Chevrolet 6.6L , Dodge Cummins 5.9L 6.7L , 4.5L 6.8L 8.1L 9.0L HPCR , Isuzu 4HK1 6HK1 HPCR.
Material: Constructed with high standard Steel Wire and PVC coated handle, practical and durable in use.Provides a much longer service life.
Cleaning carbon deposits , rust , dirt out of injector seats, bores, and cups without damage, Make the job easier to save your time.
This complete injector brush kit should be a necessity for anyone pulling and swapping injectors. Replacement: alternative to 3252 AP0083 AP0084 AP0085
Package included : 1pcs Spiral Tube Brush ,1pcs Flat Bottom Brush . [ 100% Satisfaction service ] — If you're not 100% satisfied with our PRODUCTS, simply return it for a full refund in 30 days. Professional AND Sincere Service allows you to take no risks to purchase.Thank you.

Rank No. #16

munirater Injector Sleeve Cup Removal Install Tool Replacement for 1994-2003 F-Series 7.3L XC3Z9229AB F4TZ-9F538-A

Fitment - Replacement for 1994-2003 F-Series 7.3L, 1994-2003 E-Series 7.3L, 1994-2003 Powerstroke 7.3L
Part Numbers - XC3Z9229AB, F4TZ-9F538-A
Durable - The high-speed steel cone used in the disassembly tool has good durability, it will remain sharp, and you can use this tool hundreds of times
Design - Other tools on the market do not have hardened threads on the disassembly tools, these tools are usually too dull to complete the job
Small - Small enough to enable you to change even the hard to get at cups at the rear of the engine

Rank No. #17

Fuel Injector Sleeve/Cup Remove & Install Kits for Ford 6.0L & 6.4L Engines 03-10

Rank No. #18

Injector Sleeve Cup Bore Seat Cleaning Brush Kit Fits for 1994-2018 Ford Powerstroke 6.0/6.4/6.7/7.3 Engine Caterpillar 3126 C7 C9 Replace AP0084 AP0085 3252

✔Fits for: Ford 4.5L LCF 6.0L 6.4L 6.7L and 7.3L Powerstroke, Caterpillar(CAT) 3126 C7 C9 , Navistar T444E DT466 VT365 VT275 , MaxxForce 5/7/DT/9/10/N9/N10 ,GM , Chevy 6.6L , Dodge Cummins 5.9L 6.7L , 4.5L 6.8L 8.1L 9.0L HPCR , Isuzu 4HK1 6HK1 HPCR.
✔High Quality: Made of high standard Steel Wire and PVC coated handle, practical and durable in use, A+ performance in both function and life time.
✔Clean your Engine: Cleaning carbon deposits , rust , dirt out of injector seats, bores, and cups without damage.
✔Easy to Use: No skills required, just a clean tool, you can finish them in minutes.
✔Customer Service: All products are sold after strict inspection. We provide with professional consulting all the time. Contact with us if you have anything with question, we'll reply within 16 hours to offer help.

Rank No. #19

Carkio Fuel Injector Cups Sleeves Pack of 8 Fuel Injector Cups Kit Compatible with Fo-rd 1994-2003 for Power-stroke 7.3L Diesel for Fo-rd F250 F250 F350 F450 F550 E550 Super Duty

O.E Quality: Injector sleeves kit is made from Durable High Quality Brass. The Fuel Injector Sleeves surface will not fade or rust for a long time, and will maintain good color in the light. Resists high temperatures and low temperatures, avoiding thermal expansion and contraction.
Fitment: Injection Pump Nozzle Sleeve fits for 7.3L Power stroke Diesel Engines for Fo-rd 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003
Fuel Injector Cups Sleeves: You can install the cylinder head faster. This is a premium fuel injector cup for Fo-rd engines that you can use with confidence.
Excellent replacement: Fully checked before shipment to ensure quality problems. Excellent replacement for F4TZ-9F538-A 1814376C1 CM5055
What you will get: Fuel injector cups 8 pcs set, and well aftersales from Carkio.

Rank No. #20

Injector Sleeve Cup Removal Tool & Install Kit For 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 Ford 7.3L Powerstroke F4TZ9F538A

For Ford E-3501995-2003 For Ford E-450 2000-2003 For Ford E-5502002 For Ford Econoline Super Duty1996-1999 For Ford Excursion 2000-2003 For Ford F Super Duty 1995-1997 For Ford F-250 1994-1997 For Ford F-250 Super Duty 1999-2003 For Ford F-350 1994-1997 For Ford F-350 Super Duty1999-2003 For Ford F-450 Super Duty 1999-2003 For Ford F-550 Super Duty1999-2003 For Ford F59 1994-1996
Manufacturer Part Number: F4TZ9F538A, T444E, WT73PD,ZTSE4303,, XC3Z-9229-AB, XC3Z9229AB, CM-5010, 1833564C92,, ,1814376C1,1833564C92,1833564C91,1823492C97
Product: Includes Removal Tool, Installation Tool, Seals, (8) Cups, and Cleaning Brushes
Notes: Fuel Injector Cup Installation Kit -- 7.3L V8 Diesel Powerstroke; Fuel Injector Sleeve Cup Removal and Installation Tool Kit; With Seals, Cups, and Brushes
Support one year warranty, we guarantees all products to be free from defects in materials and workmanship when properly installed and under normal usage to the original purchaser and for the original vehicle parts were installed on.

Last update on 2023-08-08 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Ford 73 Injector Cup Replacement?

Do you get stressed out thinking about shopping for a great Ford 73 Injector Cup Replacement? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Ford 73 Injector Cup Replacement, which is why we have assembled a comprehensive list of the greatest Ford 73 Injector Cup Replacement available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Ford 73 Injector Cup Replacement that you consider buying. Your questions might include the following:

Is it worth buying an Ford 73 Injector Cup Replacement?
What benefits are there with buying an Ford 73 Injector Cup Replacement?
What factors deserve consideration when shopping for an effective Ford 73 Injector Cup Replacement?
Why is it crucial to invest in any Ford 73 Injector Cup Replacement, much less the best one?
Which Ford 73 Injector Cup Replacement are good in the current market?
Where can you find information like this about Ford 73 Injector Cup Replacement?

We’re convinced that you likely have far more questions than just these regarding Ford 73 Injector Cup Replacement, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Ford 73 Injector Cup Replacement, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Ford 73 Injector Cup Replacement. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Ford 73 Injector Cup Replacement buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Ford 73 Injector Cup Replacement currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Ford 73 Injector Cup Replacement has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Ford 73 Injector Cup Replacement?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Ford 73 Injector Cup Replacement.
Customer Ratings: Number ratings grade Ford 73 Injector Cup Replacement objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Ford 73 Injector Cup Replacement.
Product Quality: You don’t always get what you pay for with an Ford 73 Injector Cup Replacement, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Ford 73 Injector Cup Replacement is should be an indication of how long it will work out for you.

We always remember that maintaining Ford 73 Injector Cup Replacement information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Ford 73 Injector Cup Replacement is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best Ford 73 Injector Cup Replacement of 2023 – Reviewed and Top Rated

How Do You Buy The Best Ford 73 Injector Cup Replacement?

Related Post: