Contents
20 Best Gas Can Vent Valve of 2023 – Romance University
After hours researching and comparing all models on the market, Romance University finds out the Best Gas Can Vent Valve of 2023. Check our ranking below.
2,632 Reviews Scanned
Rank No. #1
Okimyi Fuel Gas Can Vent Caps, 3 Pack Upgrade Fuel Gas Can Vent Kit, Fuel Gas Tank Vent Caps for Gas Can Fuel Tank Water Jug to to Allow Faster Flowing
- High Quality Material: Universal gas can vent cap is made of heavy-duty brass, stainless steel and premium Viton O-Ring seals, which is corrosion resistant and leak proof and long lasting.
- Anti-Loss Design: No longer worry about losing the cap because the gas can vent is designed with new upgrade red lanyard-attached cap, also double black Viton O-Ring can ensure leak proof.
- Easy to Install: Instruction Included. Easy to follow the instruction and complete installation. These gas tank exhaust caps kits came 3 to a pack and are complete with the drill bit, wrench, and lead wire needed to install. Just follow the instruction and install these vents in minutes!
- Allow Faster Flowing: The fuel can vent caps can provide a vent to enhances flow for faster refills, gas fuel water can jug to allow faster flowing, ensures smooth, fast flow with less splashing and spilling, really save your time and efforts.
- Wide Application: This gas can vent kit compatible for any 1 3 or 5 gallon Plastic, Diesel, Kerosene, Gas, Water Can Or Anything that you need a Smoother Faster Flow & Very Easy to Install.
Rank No. #2
Magicfour Fuel Gas Can Vent Caps, 6 Pack Fuel Gas Tank Vent Caps Gas Can Replacement Vent Plug Gas Jug Vent Caps for Gas Fuel Water Can Jug to Allow Faster Flowing
- Premium Material: Universal gas can vent cap is made of premium stainless steel and premium rubber, rustproof and durable.
- Leak Proof Design: Gas can replacement vent cap is designed with screw caps and double rubber sealing rings that can ensure leak proof.
- Vent Cap: Fuel can air vent caps can be used for all kinds of 3 or 5 gallon gas can or other plastic gas or water can, provide a vent and make the fuel or water pour out quickly and smoothly.
- Easy Operation: Simple to install the valve stem and rubber sealing ring onto the can via a wire after drilling a hole through the can, then screw on the dust cap finished.(It's better to drill a hole on high and back of the can, avoiding the handle because it's thicker.)
- Packing List: The package will come with 6 pieces gas can vent caps, 1 piece drill, 1 piece wire,1 piece wrench and 6 pieces stickers.
Rank No. #3
YAKEFLY 6 Pack Fuel Gas Tank Vent Caps,Leak-Proof Gas Jug Vent Caps Enhances Flow,Metal Gas Can Vent Cap Kit,Gas Tank Vent Cap Fuel Tank Exhaust Vent Valve Kit for Faster Refills
- [Package Contents] The package contains 6 fuel gas tank ventilation caps, 1 drill bit, 1 wire and 2 wrenches. Package purchase is more convenient for you to use.
- [High Quality and Durability] These air tank exhaust caps are made of high-quality stainless steel and brass, which are well made, rust-proof, wear-resistant and durable.
- [Leak Proof Design] The vent cap of the fuel gas tank is equipped with a screw cap and a double rubber sealing ring, which provides double leak-proof protection to prevent the splashing and overflow of liquid in the tank.
- [Save Time] The gas tank vent cap and the oil tank vent can increase the flow to speed up the refueling; The gas fuel water tank can speed up the flow speed, ensure smooth and fast flow, and save your time.
- [Easy to Assemble] Just drill a hole in the oil drum or container, then use the wire with connecting valve rod and rubber sealing ring, and then use the provided cover to fix the nozzle. It can be done easily even without any manual skills.
Rank No. #4
10 Pack Universal Large Yellow Fuel Gas Can Vent Caps Chilton Briggs Rotopax Gott
- New JSP Brand Aftermarket Universal Fuel Can Large Yellow Vent Cap ~ 10 Pack
- NEW and IMPROVED with retaining lip to hold the vent in place after installation ~ Made in USA!
- Vent Caps are installed onto any non-vented plastic fuel cans ~ Allows a leak free, faster flow
- Fits both Plastic and Metal Fuel Jugs ~ You will have to drill a 31/64" (one size below 1/2") hole into the can, then push the vent into the hole.
- Fits Plastic and Metal Fuel Jugs such as Blitz, Wedco, Scepter, Essence, Midwest, Eagle, Chilton, Briggs & Stratton, Rotopax, Gott, Rubbermaid, Sears Craftsman, Anchor and Koplin.
Rank No. #5
JSP Manufacturing Pick a Pack Yellow Fuel Gas Can Vent Cap Chilton Briggs Rotopax Gott Anchor Multipack Pricing (10)
- New JSP Brand Aftermarket Universal Fuel Can Large Yellow Vent Cap ~ 10 Pack
- NEW and IMPROVED with retaining lip to hold the vent in place after installation ~ Made in USA!
- Vent Caps are installed onto any non-vented plastic fuel cans ~ Allows a leak free, faster flow
- Fits both Plastic and Metal Fuel Jugs ~ You will have to drill a 31/64" (one size below 1/2") hole into the can, then push the vent into the hole.
- Fits Plastic and Metal Fuel Jugs such as Blitz, Wedco, Scepter, Essence, Midwest, Eagle, Chilton, Briggs & Stratton, Rotopax, Gott, Rubbermaid, Sears Craftsman, Anchor and Koplin.
Rank No. #6
Olaismln Gas Can Vent Caps, 4Pack Universal Gas Can Vent Kits with New Upgraded Lanyard-Attached Caps and Durable Stainless Steel Allow for Faster Flowing
- 【Wide Application】 - Fits all 1, 3, 5 or 10 gallon fuel, water or other plastic gas cans. Efficient design allows the vent cap to easily screw into the hole you drill. Fits a variety of gas tank shapes and is a great assistant for any cans you want to get gasoline or water flowing faster and smoother.
- 【Easy Operation】 - Our screw-in gas vent cap is the easiest solution for plastic can venting. Simply drill a hole in the drum or container, screw the vent cap into the hole, and finally tighten the vent cap with a wrench until the gas drum fitting is secure.
- 【Special Design】 - The vent cap is designed with a new upgraded lanyard-attached cap, double leak-proof protection to prevent splashing and spilling of liquid inside the can, while no longer worry about losing the cap and allows one-handed operation.
- 【High Quality Materials】 - Universal gas tank vent caps are made of high quality stainless steel and high quality rubber, which combine rugged construction with anti-leak, anti-rust and wear resistance to ensure durability.
- 【Absolutely Effective】 - Fuel gas can vent caps can provide a vent to allow for a quick and smooth pour of fuel or water by helping to reduce air constriction, and can reduce splashes and spills, truly saving your time and effort.
Rank No. #8
Gas Can Vent Caps | 6 Pack Fuel Gas Tank Vent Caps | Metal Gas Can Replacement Vent Plug | Leak-Proof Gas Jug Vent Caps| Gas Tank Exhaust Caps for Faster Flow
- 💧 【Faster Flowing】：The upgraded gas tank vent caps can turn the gas container into vented gas can to make it have an equal air pressure for constant flow. Our gas tank exhaust caps kit can make sure your fuel gas can more smoother and faster flowing to save your time.
- 💧 【Double Leak-Proof Design】: The gas can replacement vent caps come with the longer stainless steel gas can caps and quality rubber seals, double leak resistant protection to prevent the liquid of the can from splashing and spilling.
- 💧 【Durable Material】: The replacement vent caps are made of high quality stainless steel. The other accessories of the fuel can air vent caps is designed with premium brass components and reliable rubber seals which can combine the firm construction and leak-resistant, rustproof and wear resistant.
- 💧 【Easy To Assemble】：Simply drill an hole in the jerry can or container, and use the wire with the attached valve stem and rubber sealing ring, then secure the nozzle by using the provided cap. It can be easily complete in 12 minutes even without any manual skills.
- 💧【What's In the Box】: You will receive 6 pieces air vent replacement cap plug with 1 piece drill, 1 piece wire and 2 piece wrench.The gas jug vent caps are suitable for any fuel, diesel, kerosene, gas, water can or any can you want to make it flow more faster and smoother.
Rank No. #9
Sunxeke 3 Pcs Gas Can Vent Caps Tank Caps Replacement Jug Plug for Speed up gas,liquid flow N1-G1-024
- Advantage: Made of high-quality copper and rubber, it has high hardness, is not easy to deform and is durable. (More durable than ordinary stainless steel! )
- Nut design and double rubber sealing ring design ensure no gas or liquid leakage.（If necessary, please use a suitable tool to rotate and pull out the valve core, such as tweezers, etc.）
- This product video installation tutorial is available on the product home page.
- 1. Put the wire through the drilled hole of the gas can, out of the spout and place the valve stem with black rubber band onto the wire. 2. Bend the wire to keep it from sliding off the wire and pull the wire and golden metal valve stem through from the small hole. 3. Slide the black rubber band over the wire and onto the valve stem and pull the wire out of the valve stem. 4. Place the second black rubber band, steel ring and nut sequentially on the valve stem and tighten the nut with a wrench.
- Package content:3 x Gas can vent caps;1 x spanner;3 x sticker;1 x metal wire; 1 x Bit (of a drill)
Rank No. #10
JSP Manufacturing 5 Yellow Fuel Gas Can Jug Vent Cap
- New JSP Brand Aftermarket Universal Fuel Can Large Yellow Vent Cap ~ 5 Pack
- NEW and IMPROVED with retaining lip to hold the vent in place after installation ~ Made in USA!
- Vent Caps are installed onto any non-vented plastic fuel cans ~ Allows a leak free, faster flow
- Fits both Plastic and Metal Fuel Jugs ~ You will have to drill a 31/64" (one size below 1/2") hole into the can, then push the vent into the hole.
- Fits Plastic and Metal Fuel Jugs such as Blitz, Wedco, Scepter, Essence, Midwest, Eagle, Chilton, Briggs & Stratton, Rotopax, Gott, Rubbermaid, Sears Craftsman, Anchor and Koplin.
Rank No. #11
NITEGUY 8 PCS Gas Can Vent Cap,Tank Vent Enhances Flow for Allow Faster Flowing,Universal Diesel and Gas Replacement Vent Valve Made of Durable Brass with Attached Silicone Rubber Cap(New Upgrade)
- 【Universal Fitment】: 8 gas tank exhaust caps,The replacement of these exhaust caps makes the fuel/water/diesel/kerosene flow faster and smoother with less splashing and spills,thus saving time.
- 【Newly Upgraded】: Newly upgraded design, silicone rubber lanyard cap to prevent loss, safe and reliable.Push In exhaust caps is a better sollution than just poking a hole in the can because when you transport the full can, you can close the cap and prevent gas from sloshing out.
- 【Easy to Install】: Drill an 8mm hole in the kettle, then use the iron wire to penetrate the valve body into the hole, put on the fluorosilicone rubber seal, use a wrench to lock the nut, cover the sealing cover, optimize the product, the fluorosilicone seal is corrosion-resistant and leak-proof, The valve body is made of brass, which can last longer.
- 【Universal】: exhaust caps Compatible use This Vents For Any Plastic, Diesel, Kerosene, Gas, Water Can Or Anything That You Need A Smoother Faster Flow & Very Easy To Install.
- 【Package】: 8 gas tank exhaust caps , 1 pcs drill, 1 pcs wire,1 pcs wrench.100% SATISFACTION GUARANTEE！If for any reason you're not 100% SATISFIED, please let us know and our customer service team will help you RETURN OR REFUND.
Rank No. #12
10 Pack Black Universal Gas Diesel Water Fuel Can Jerry Jug Air Vent Replacement Cap Plug
- 10 Black Universal Air Vents with Retaining Lip
- Compatible with Blitz, Briggs & Stratton, Eagle, Essence, Midwest, No Spill, Scepter, Wedco and any other Plastic Fuel Cans
- Vent Caps are installed onto any non vented Plastic Fuel Can to allow leak free fast flowing fuel.
- The retaining lip holds the vent in place after installation.
- A drill is required for installation.
Rank No. #13
weideer 6pcs Gas Can Vent Caps for Gas Fuel Water Can to Allow Faster Flowing,with Drill, Wire, Wrench and Warning Stickers for Gas Fuel Can (Silver)
- Material:Made of quality brass components and reliable rubber seals, rustproof and durable.
- Leak Proof Design: The replacement vent cover is designed with screw caps and double rubber sealing rings to ensure leak-proof. Even in the case of transportation or oil drum landing, there will be no oil spill.
- Convenient operation:You only need to drill a hole in the tank body, then install the valve stem and rubber sealing ring on the tank body through wires, and then tighten the dust cover.
- Application:The gas tank vent caps are suitable for all kinds 1, 3 and 5 or 10 gallon fuel cans, diesel cans, water tank, plastic jugs and jerry cans. Provide a vent and make the fuel or water pour out quickly and smoothly and reduce splash and overflow.
- Package Includes:6 pcs gas can vent caps, 1 pcs drill, 1 pcs wire,1 pcs wrench and 6 pcs stickers.
SaleRank No. #14
37 Pcs Gas Can Spout Replacement Set, Gas Can Nozzle 5 Gal ，6 Bendable Tubes，6 Screw Collar Coarse Thread &6Fine Thread-Fits Most of The Cans,6 Threaded caps ，6 Vent Caps 1 Drill Lid (37)
- 37 pcs Gas can spout replacement ,Suitable for most 1/2/5/10 gal gas cans，12 * screw collar caps are all 1.75inch, 6 of them are coarse threads and the other 6 are fine threads. Please check your gas can outside thread diameter before you make this purchase，as Can Spout Kit for 1/2/5/10 Gal Replacement of Old Tanks
- HIGH QUALITY: these gas can spout are made of HDPE plastic（same as 10 5 gallon gas can plastic）, which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life，Safe without leakage
- Simple to install: Gas can spout replacement kit includes complete package: 6 x screw caps (1 coarse thread and 1 fine thread),6x yellow nozzle and rubber gasket,6x Threaded Nozzle Cap,12x Gas Tank Vent Caps,6x Tube cap,1X drill
- The spout cap tube and The spout are threaded, every the spout cap has a thick rubber sealing ring inside. as long as you tighten the nozzle cap. No oil spills, even in the case of transport or a tank topped down.
- We offer two types of gas con vent caps,one is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use.another is used for another oil can with a vent cap at the tail, Can replace old vent caps.you don't have to go through the hassle of replacing your old gas tank. By replacing the nozzle and vent kit，helping you save your old gas can instead of buying a new one
Rank No. #15
25PCS Gas Can Spout Replacement, Gas Can Spout Nozzle Kit Fit for Most 1/2/5/10 Gallon Cans, includes 3 Screw Collar Coarse Thread , 3 Fine Thread, 3 Bendable Tubes, Gas Can Vent Caps, Thick Rubber Pad, gas can vent cap
- 【Suitable】:25pcs Gas can spout replacement ,Suitable for most 1/2/5/10 gal gas cans.
- 【Material】: Made of high quality material, it can be bent freely without breaking in use. Thicker and wider rubber gasket fits the cap better and prevents liquid spillage during refueling.
- 【Features】: The hexagonal screw cap with the rubber gasket of the oil nozzle cap will not spill oil even if the tank is transported or dropped.
- 【Types】: We provide two types of tank vent caps, one is for tanks without a vent at the end of the tank, you just need to drill and install it and it is ready to use. The other type is for another tank with a vent cap at the end, which can replace the old vent cap. You no longer have to worry about replacing your old oil can.
- 【Tip】: By regularly replacing the oil nozzle and vent kit, you can save your old oil can instead of buying a new one.
Rank No. #16
10 Yellow Fuel Gas Can Jug Vents/Cap Replacement Wedco Rotopax Gott Septer Anchor Blitz
- TEN (10) Mr. Yellow Vents
- Fits Plastic and/or Metal Fuel Jugs/Cans!
- Fits Blitz, Kolpin, Rotopax, Scepter, Essence, Midwest, Eagle, Chilton, and many more gas cans
- Allows faster and smoother flowing fuel/water/diesel/kerosene!
Rank No. #17
C CLINK Fuel Gas Can Vent Caps, 12 Pack Fuel Gas Can Vent Kits Made of Durable Brass Fuel Gas Tank Vent Caps with Lanyard-Attached Cap for Gas Can Fuel Tank Water Jug to Allow Faster Flowing
- High quality material. Universal fuel gas tank venting assembly is made of [gas rod, nut, cap (made of brass)] 304 stainless steel gasket, TPU connecting lanyard, 2 high quality Viton seals, and a Viton gasket inside the cap as well, which can ensure durability and no leakage.
- Anti-loss design. No more worrying about losing the lid, because the exhaust lid is designed with a new upgraded green TPU lanyard attached to the lid, which is strong and durable.
- Easy to install. Follow the instructions to complete the installation. These gas tank vent cover kits come in a pack of 12 and come with a 7.8mm cobalt-containing drill bit (can drill stainless steel, copper, aluminum, iron and other metals) open-ended 12mm wrench and 62CM/24.4in soft wire needed for installation. Just follow the instructions and have these vents installed in minutes!
- Allow for faster flow. The Fuel can vent cap can provide a vent that allows fuel or water to pour out quickly and smoothly, really saving you time and effort.
- Widely used. Ventilation kits are available for a variety of 3 - or 5-gallon tanks or other plastic gas or water tanks and are easy to install and use.
Rank No. #18
6Pcs Gas Fuel Cap Air Vent Hose Universal CNC Tank Valve Vent Tube with Chekc Ball Aluminum Breather for Atv Motorcycle Dirt Pit Quad Bike Motocross
- Fuction:This atv breather tube can replaces awkward fuel tank breather hoses,one way vent allows the tank to breath while preventing fuel from splashing out and making a mess;There is a check ball inside the hose
- PROTECTION:Fuel tank cap vent can protect your gas tank from filling with dirt,dust and debris in everyday use or more extreme motocross environments,keeps air in and gas from coming out
- Fuction:This atv gas cap hose can replaces awkward fuel tank breather hoses,one way vent allows the tank to breath while preventing fuel from splashing out and making a mess;There is a check ball inside the hose
- Fuction:This atv breather tube can replaces awkward fuel tank breather hoses,one way vent allows the tank to breath while preventing fuel from splashing out and making a mess;There is a check ball inside the hose
Rank No. #19
Gas Can Vent Caps Fuel Tank Exhaust Vent Valve with Drill and Leak Proof Sealing Ring Diesel and Gas Container Replacement Vent Valve for Faster Refills (6 Pack)
- ✔️HIGH QUALITY& DURBALE: Made of heavy-duty brass, stainless steel and premium rubber, these gas tank exhaust caps are well-made, rustproof and wear resistant. They are feature with screw caps and double rubber sealing rings, which is corrosion resistant and leak proof and long lasting.
- ✔️CONVENIENT & TIME SAVING: Theses vents allow fluids to free flow without any air locks. Less splashing and spills. With this vent cap, you can pour out the fuel or water quickly without any effort. Finish yard work in time!
- ✔️EASY INSTALLATION: Instruction Included. Easy to follow the instruction and complete installation. These gas tank exhaust caps kits came 6 to a pack and are complete with the drill bit, wrench, and lead wire needed to install. Just follow the instruction and install these vents in minutes!
- ✔️UNIVERSAL SIZE: Exhaust caps are compatible with most 1-, 3- and 5-gallon plastic, diesel, kerosene, gas, and water can. Fuel tank vent spout allows faster delivery of fuel on your vehicle, lawnmower, boat, etc.
- ✔️GREAT VALUE: Package include gas tank exhaust caps x 6, drill bit x1, lead wire x 1, wrench x 1, instruction x 1, plastic storage box x 1. Please don't hesitate to contact us if you have any questions about the product
Rank No. #20
19 Pieces Fuel Gas Can Vent Caps 8 Pieces Fuel Gas Tank Vent Caps Gas Can Replacement Vent Plug Metal Gas Jug Vent Caps with Drill, Wire, Wrench and Warning Stickers for Gas Fuel Can (Yellow)
- Package contains: you will receive 8 pieces gas can vent caps with 1 piece drill, 1 piece wire, 1 piece wrench and 8 pieces stickers, they are all the necessary tools needed for installation, the color of drill is silver or black in random
- Durable construction: made of quality brass components and reliable rubber seals to ensure firm construction and leak proof, they are rustproof and wear resistant, also can serve you for a long time
- Practical leak proof design: these replacement vent cap is designed with screw caps and double rubber sealing rings, which can ensure leak proof; Even in the case of transportation or when the oil drum falls to the ground, there will be no oil overflow
- Faster flow: gas tank vent caps are suitable for all kinds 5 or 10 gallon fuel cans, diesel cans and water tank; By helping to reduce air constriction, our gas valve ensures smooth, fast flow with less splashing and spilling
- Convenient operation: this package contains all the accessories needed for installation, you can drill a hole through the can at first, and install the valve stem and rubber sealing ring onto the can via a wire, then screw on the dust cap finished
Last update on 2023-08-01 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Gas Can Vent Valve?
Do you get stressed out thinking about shopping for a great Gas Can Vent Valve? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Gas Can Vent Valve, which is why we have assembled a comprehensive list of the greatest Gas Can Vent Valve available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Gas Can Vent Valve that you consider buying. Your questions might include the following:
- Is it worth buying an Gas Can Vent Valve?
- What benefits are there with buying an Gas Can Vent Valve?
- What factors deserve consideration when shopping for an effective Gas Can Vent Valve?
- Why is it crucial to invest in any Gas Can Vent Valve, much less the best one?
- Which Gas Can Vent Valve are good in the current market?
- Where can you find information like this about Gas Can Vent Valve?
We’re convinced that you likely have far more questions than just these regarding Gas Can Vent Valve, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Gas Can Vent Valve, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Gas Can Vent Valve. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides an Gas Can Vent Valve buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Gas Can Vent Valve currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Gas Can Vent Valve has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Gas Can Vent Valve?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Gas Can Vent Valve.
- Customer Ratings: Number ratings grade Gas Can Vent Valve objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Gas Can Vent Valve.
- Product Quality: You don’t always get what you pay for with an Gas Can Vent Valve, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Gas Can Vent Valve is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining Gas Can Vent Valve information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Gas Can Vent Valve is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
FAQ:
Q: What is the best vent for a gas can?
A: . The Magicfour Fuel Gas Can Vent is an ideal choice for those looking for precision manufacturing. It is designed to provide a universal fit, enabling you to place it onto your current gas can. The Magicfour Fuel Gas Can Vent is an ideal choice for those looking for precision manufacturing.
Q: How does the fuel tank vent valve work on a car?
A: The fuel tank vent valve controls the flow of air getting into and out of the charcoal canister. One side of the fuel tank vent valve is connected to the charcoal canister and the other to a vent hose. The valve is controlled by the engine computer. Over time, the fuel tank vent valve can become clogged and be stuck open.
Q: Can a clogged gas tank vent valve be repaired?
A: The repair includes vent valve replacement and some modification of the vent valve setup. A clogged up vent valve can cause trouble filling the gas tank. The vent valve design and setup varies between different manufacturers.
Q: Can you put a vent on a plastic fuel can?
A: These vents can be installed on any non-vented plastic fuel cans in order to provide a vent and allow faster flowing fuel. You will have to drill a 31/64 hole into the can, then push the vent into the hole. Close your vent cap during transportation to provide a leak free, spill proof ride. Made in USA! 1.