Contents
The Best Genmitsu Cnc 3018-Pro of 2023 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Genmitsu Cnc 3018-Pro of 2023. Check our ranking below.
2,159 Reviews Scanned
- New Version: Genmitsu CNC 3018-PRO is an upgraded version of 3018; All components do not need to be positioned, which greatly reduces the difficulty of assembly and improves the working accuracy; Capable of cutting all types of plastics, soft aluminum, woods, acrylics, PVCs, and PCBs, etc
- Upgraded Power Adapter: UL Approved and out-of-the-box support for the drop in 20,000rpm Spindle, no need to modify G-code to ramp up to full speed
- Controller Software: The Genmitsu 3018-PRO uses Grbl, a high-performance open-source software for controlling movement, and runs on Arduino; Includes CARVECO Maker CAM Design Software and CANDLE for controlling your machine and running your GCODE design files
- Optional Upgraded Parts: Super Size your 3018 CNC to a 3040 by getting a Genmitsu 3040 Y-Axis Extension Kit; The 3040 Aluminum Spoilboard and 3040 MDF Spoilboard for this extension kit are also available to buy
- Note: Assembly Instructions and User Guide are provided, please find at the Product Guides and Documents Section below and get everything you might need; If you get stuck, check out the SainSmart Resource Center (see at User Guide) or contact us with any questions that arise
- The V2 is an upgraded version of one of our best selling Desktop CNC Machines, the 3018-PROVer. Class leading value has gotten even better and is easier than ever before to setup. With more pre-assembled accessories, it takes less than 20 minutes to assemble this 3018-PROVer V2 CNC machine. A real entry-level CNC for anyone who wants to learn a new skill, work on an artwork project, design a DIY gift, or start a small business.
- Still based on open-source Grbl v1.1, the 3018-PROVer V2 CNC has stepped up to more powerful but silent Toshiba TB6S109 drivers with 32-bit chips. More extended function ports were added, such as the Air Assistance Pump Port, and MPG Port. It also supports updating the firmware through an SD card.
- The redesigned Z Axis Carriage has fixed excess movement which came from the old design anti-backlash spring. Not only did this improve the engraving accuracy, but also increased the effective range of the Z Axis from 35mm to 40mm. All stepper motors are equipped with manual jog wheels making it easy to adjust and position your spindle or stock material.
- The 3018-PROVer V2 CNC Machine comes with a one-piece machined and molded aluminum spoilboard. It ensures the flatness and strength of the work platform. It is compatible with most of the CNC clamps on the market.
- CAD/CAM software to design then convert your ideas into instructions (GCode) that the router can understand and execute (common options are Carveco, Fusion360, and Easel). If you get stuck, check out the SainSmart Resource Center (see at User Guide) or contact us with any questions that arise.
- An effective working area of 15.7” x 15.7” x 3.1” is large enough for most daily wood carving projects. The redesigned Z-axis carriage makes swapping a spindle easier. Adding more screw holes on the non-all-in-one Z-axis carriage allows you to install the larger spindle higher for extra overfeed height.
- New Steel HSS Frame - all new redesigned frame structure, each axis is composed of two 16mm Steel HSS linear tubes and a lead screw motion drive, dual Y axis rails, and all metal frame. This new high-rigidity structure ensures the stability and accuracy of the milling machine.
- Still based on open-source Grbl v1.1, the 4040-PRO CNC router has stepped up to more powerful but silent Toshiba TB6S109 drivers with 32-bit chips. Upgrades include extended function ports like a Air Assistance Pump Port, and MPG Port.
- All main parts are pre-assembled and it just takes about 15 minutes to finish the whole machine assembly. The spoilboard is combined by two pieces of MDF boards. Each MDF board could be replaced individually. You don’t need to replace the whole spoilboard when a panel gets damaged.
- The 4040-PRO CNC machine is supplied with 42mm and 52mm spindle mounts. The additional 65mm (B0BRZSY475), 69mm (B0BRZSVVK3) spindle mount, and other upgraded accessories are available to order. You can easily upgrade the machine according to your needs. If you get stuck, check out the SainSmart Resource Centre (see User Guide) or contact us with any questions you may have.
- Improved Power & Accuracy: This new laser module has a focal spot of 0.1mm x 0.1mm much smaller and consistent than current generation modules, allows for a leap in power and accuracy. It can cut 4mm plywood in one pass.
- Stock Air Assist Nozzle: Light-weight aluminum air nozzle delivers improved engraving speed and quality, protects your optics from smoke and dust for better performance and laser lifespan.
- Longer Operation Life: Fixed focus laser diode with upgraded heat dissipation will let the module operate for extended periods with a longer operation life.
- UV Laser Shield Protection: The laser head comes with a laser shield to filter laser radiation and avoid accidental laser exposure for safer operation.
- Compatibility: This laser module is only compatible with Genmitsu 3018-PRO, 3018-PROVer, 3018-PROVer V2, 3020-PRO MAX CNC Milling Machine
- 500W Spindle & High Speed CNC Router Machine: The 500w Spindle is a Robust and Versatile Component Design. Its High-power Output Enables It to Deliver Consistent Performance, Even When Cutting Through Dense Materials Like Aluminum and Copper. This Powerful Spindle Ensures That Your Machine can Tackle Even The Most Demanding Projects While Maintaining Precision And Efficiency. The Maximum Movement Speed can Reach 5000mm/Min. The Spindle Speed Range is 0-12000RPM/Min.
- 3018 Pro Max All Metal Structure: All-metal Construction, Have Durability, Stability, and Reliability. By Using Reinforced Aluminum Profiles, The Machine Frame can Withstand Heavy Loads and Resist Wear And Tear Over Time. Furthermore, No Plastic Parts (Except For Electrical Components) Ensures That The Frame Maintains Its Structural Integrity Even in Harsh Operating Conditions.
- Extra Long Z-Axis Travel: The New Design Makes This Machine Have The Longest Z-axis Stroke Among (80mm) The Standard Models on The Market.additionally, Our Machine Frame Incorporates a 12mm Optical Axis, Which Provides Precise Linear Motion and Accurate Positioning. This Feature is Crucial For Maintaining The Performance and Efficiency of Various Machinery and Automated Systems.We Provide Dedicated Upgrade Kit for 12mm, Please Contact us if Necessary(Upgrade Kit is Sold Separately).
- 3018 CNC Unparalleled Security: The 3018 CNC Machine Boasts a Robust Safety System with 6 Limit Switches and an Emergency Stop Button, Ensuring Optimal User Safety While Effectively Preventing Any Potential Abnormal Machine Conditions. Moreover, The Xyz Axis is Thoughtfully Outfitted with Manual Handwheels, Enabling Seamless and Accurate Positioning of The Machine Origin, Thereby Enhancing Overall Operational Efficiency and Facilitating a Highly Convenient Working Process.
- Two-in-One CNC Machine: The Ability to Switch Between Spindle and Laser Modes Allows Users to Perform a Wide Range of Tasks with a Single Machine, From Cutting and Engraving to Marking and Etching. Having Versatile Equipment That can Adapt to Different Tasks and Materials is Essential for Maximizing Productivity and Efficiency.
- Application: The laser module is ideal for engraving, cutting, scribing, and drilling. Desired patterns can be made easily on the wood or plastic by this unit. This module is compatible with Genmitsu 3018-PRO, 3020-PRO MAX, ProverXL 4030, 4030 V2 and PROVerXL 6050 Plus
- Fixed Focus: The fixed focus distance is 20mm. Compared with the adjustable focus laser module, the light spot of the fixed focus laser module is smaller. At the same power, the fixed focus laser module can cut 3mm linden wood in one pass, not possible with current adjustable laser modules.
- Longer Service Life: The fixed focus laser module can work at full power for 8 hours without any light decay. The service life can be up to 10,000 hours.
- Excellent Heat Dissipation: Equipped with a large aluminum heatsink and cooling fan, this can help the heat dissipate fast and ensure the laser module works continuously.
- Industrial Grade Design: It is designed for industrial laser engraving machines, it adopts an intelligent feedback control circuit, external ACC constant current driving Mode. Featuring reliability, high stability, high efficiency, low noise, and excellent laser beam quality.
- A spoilboard is a disposable workbench mounted above the router's table. It can protect the router table from damage as well as being an expendable surface that can participate in workholding.
- Material: MDF (Medium-Density Fibreboard). MDF is very dense translating into more weight with enhanced strength and durability. Size is 30 x 18 x 1.2cm (11-4/5''x 7''x 1/2'')
- Compatibility: Perfectly compatible with ALL 3018 Series CNC Router Kits except the 3018-PROVer V2
- Application: Usually used when cutting or carving wooden materials. The MDF spoilboard is used as a base to cut on so that your CNC table is not damaged by the cutting tools. It can ensure the stability of the cutting material, thereby achieving more precise cutting
- Compatible with Genmitsu 4040-PRO and most 3018 series CNC machines on the market, including 3018-PRO, 3018-PROVer, 3018-PROVer Mach3 and 3018-MX3. Just make sure that your spindle diameter is 42mm (1.65″) and with two 4mm (0.16”) screw holes.
- This dust shoe is made of high-quality transparent ABS . The transparent design helps you keep an eye on your operations. Equipped with a 40mm long nylon brush to maximize vacuum suction and help act as a dust sweep with high dust removal efficiency. Keep your machine and work area clean while cutting, drilling, and carving.
- Two-Piece Magnetic Design: Durable, light and flexible, convenient for daily use and maintenance. Easy to assemble and install. Only take 3 steps to finish the installation.
- The split design makes it much easier to replace bits. You only need to pop off the bottom cover when replacing your bits, no tools required , and avoid other complicated procedures.
- The planting brush is much tidy and firmer than other glued ones. You could just replace the whole bottom cover when the brush is worn. Don’t need to spend much time removing and adding a new brush (If the brush is too long for your bits, we suggest that you could trim it off from the bottom according to the bits length or order a Replacement Base Bottom Cover with 20mm long nylon brush).
- Universal Compatibility: The innovative gasket design allows seamless adaptation to 65mm or 69mm CNC spindle motors or compact router. It's a perfect fit for the Genmitsu PROVerXL Series, 4040-PRO, 3020-PRO MAX V2 and 3030-PROVer MAX CNC machines that support adding the 65mm/69mm trimmer router.
- Durable & Effective: The dust shoe is constructed from high-quality and durable ABS material. Its transparent design allows you to keep an eye on your operations.
- Tidy Planting Brush: The planting brush used in this dust shoe is neater and firmer compared to glued alternatives. This contributes to effective dust collection and sweeping.
- 2-step Assembly: Simply insert the top cover into the router, align the magnets on the bottom cover to the top, and you're done. This simple assembly process ensures that you can start using it without hassle.
- Split Design: The dust shoe's integrated split design makes it easy to replace cutting bits and worn brushes. Thanks to two magnets and three supports, it has a stable structure that prevents displacement during use, offering a more secure experience than other dust shoes.
- With a mouse click, CNC machines will automatically return to a predefined position, allowing you to easily change and calibrate your tools.
- Z-Axis tool setting touch probe works with Mach3, Grblcontrol(Candle)
- Makes setting tool height a breeze, no more using the paper.
- Auto-Check setting probe.
- High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
- 2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
- Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
- Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing.
- Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device
- This controller board is designed for Genmitsu CNC Router 1810-PRO, 3018, and 3018-PRO. It can perfectly compatible with SainSmart Blue Laser Module.
- Software: GRBL controller, UniversalGcodeSender.
- Stepper motor drive: DRV8825; Spindle power: 150W; Input voltage: 24V (12-24V).
- Support XYZ three-axis control, spindle and laser module. Support 3 pin and 2 pin lasers (the 2 pin lasers: please connect the white interface " + s-").
- Support stepper motor: 12V, the maximum current within 2A, recommended within 1.5A and additional heat. (Any stepper motor 42, 57).
- All-metal structure
- T8 stainless steel screw, lead 4MM, copper anti-backlash nut
- Slide stroke: 90mm
- X-axis Upgrade Kit Matching for CNC Z-axis Sliding Table (Suitable for 10mm Diameter Optical Axis)
- Please use the accompanying stepper motor cable in this packaging
- Cutting edge diameter (CED): 0.8-3.175mm (10Pcs, 0.8mm, 1mm, 1.2mm, 1.5mm, 1.6mm, 1.8mm, 2mm, 2.4mm, 3mm, 3.175mm); Cutting edge length (CEL): 6mm; Total length: 38mm; Shank diameter (SHK): 3.175mm
- Wide Compatibility: Works with PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, and other precision parts processing.
- Titanium Coat Carbide Hard Steel: With sufficient flexural strength and wear resistance, ensuring high work efficiency.
- High Quality Material: Using high quality grained carbide material, providing good milling and cutting performance.
- Highly precision: Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.
- Y Axis Extension Kit for Genmitsu CNC Machine
- Cost-Effective: Save money by putting your current CNC to better use; You don’t need to spend tons of money on a bigger one
- Simple Assembly: We will take you through the assembly process every step of the way
- Mini Size:Compact design perfect for use with the T-slots on desktop CNC machines like the 3018 series.
- Dimensions: This clamp is 65.3mm length x 20mm width x 50mm height. (2.57 x 0.79 x 1.97in)
- Working range: The clamp accommodates material up to 1.77'' thick and features easy to tighten knobs for quick installation or removal of stock material.
- Sturdy Quality: Constructed of High Strength 6061 Aluminum Alloy for durability and wear resistance.
- Versatility: This clamp provides exceptional clamping forces for your universal t-track system configurations and assemblies. It is ideal for work holding, positioning, and fixturing for woodworking or metalworking, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills, and more.
- Easy to Set Up: The pre-assembled module of XYZ axis and wires dramatically reduces effort of assembly, allowing you to start carving your projects in less time. 3-Month Carveco Maker Subscription is included. Turning your ideas into the next fun project or your own work of art will be much easier with Carveco Maker. We will email you the subscription link after you place the order.
- More Power: New completely redesigned control box and drive system, beefy C-BEAM Frame, precision NEMA 23 stepper motors, High Power Spindle and included adapter for a drop in Dewalt DWP611 upgrade.
- No additional parts required: Everything you need out of the box, no stripped down kits or addons, the Genmitsu PROVerXL 4030 CNC router already includes all of the accessories and components you need at an affordable price, including XYZ axis limit switches, emergency stop switches,speed control, Z-probe and more.
- Precision and Performance: Rigid C-beam structure,Leadscrew Driven, Y-axis Dual screw drive, Z-Axis Optical Axis Drive delivers more stability than the traditional v-slot drive. It's ideal for an endless variety of cutting, drilling, and carving operations on various materials including wood, MDF, plastics, foams, vinyl, and aluminum.
- Built to suit your needs: The PROVerXL CNC platform is just the beginning, if you are looking for an even larger machine get the upgrade kit available in 2 additional sizes 24”x 24”( 600 x 600mm), and up to 40” x 40” (1000 x 1000mm). Equip your machine with High Powered Laser Modules with up to 15W of true power output. Evolve with your CNC, upgrade as you go, or start big and get to making MORE.
- Best Entry-Level: The Genmitsu 3018-PROVER V2 is the first choice for beginners looking to enter the world of CNC machining. It offers incredible value and opens up a world of possibilities, from creating unique artwork and personalised gifts to starting your own small business.
- Effortless Enhancement: Accessories can be easily added to increase the functionality of the CNC machine. A wide range of accessories can be added, including extension kits, powerful spindle and offline control, etc.
- Easy Assembly: The 3018-PROVer V2 has Pre-Assembled Main Parts (gantry frame and the one-piece aluminum spoilboard) and Clear Cable Management. You can have your first CNC machine in under an hour.
- Wide Application: The CNC machine is capable of engraving a wide range of materials, such as wood, plastic, acrylic, PVC, PCB, carbon fiber, and density board. It can also engrave soft metals like copper and aluminum.
- Support Services: CAD/CAM software to design and then convert your ideas into instructions (GCode) that the router can understand and execute (common options are Carveco, Fusion360, and Easel). If you get stuck, check out the SainSmart Resource Center (see User Guide) or contact us with any questions.
- This controller can manually control the XYZ-Axis to run on Gemitsu CNC Router 4040-PRO, 3020-PRO MAX V2, 3018-PROVer V2, 3018-PROVer Mach3 & 3018-MX3
- Easy to use, no driver needed. Just connect it on the controller board of the CNC router machine, then it works.
- The running speed is divided into 3 gears: X1 X10 X100; You can also manually control the running speed by adjusting the hand wheel turning speed.
- The hand wheel is made of metal and 100PPR high-quality encoder, durable and simple to operate.
- Satisfaction Guarantee: We offer a one-year manufacturer’ warranty and lifetime customer support for this product.
- Compatible with All CNC 3018 series machines in the market and 1810-PRO. Box dimensions are 17.71” x 15.35” x 11.81” (450 x 390 x 300mm).
- Lighter and easier to assemble, no screws needed.
- Cut down dust and keep your workspace clean. Perfect for your desktop or workbench.
- Enhanced Safety: Reduce the risk of harmful debris. Safely watch the job process.
- Two Pre-cut Holes for easy access to your offline controller, or other external devices.
Last update on 2024-03-05 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Genmitsu Cnc 3018-Pro?
Do you get stressed out thinking about shopping for a great Genmitsu Cnc 3018-Pro? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Genmitsu Cnc 3018-Pro, which is why we have assembled a comprehensive list of the greatest Genmitsu Cnc 3018-Pro available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Genmitsu Cnc 3018-Pro that you consider buying. Your questions might include the following:
- Is it worth buying an Genmitsu Cnc 3018-Pro?
- What benefits are there with buying an Genmitsu Cnc 3018-Pro?
- What factors deserve consideration when shopping for an effective Genmitsu Cnc 3018-Pro?
- Why is it crucial to invest in any Genmitsu Cnc 3018-Pro, much less the best one?
- Which Genmitsu Cnc 3018-Pro are good in the current market?
- Where can you find information like this about Genmitsu Cnc 3018-Pro?
We’re convinced that you likely have far more questions than just these regarding Genmitsu Cnc 3018-Pro, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Genmitsu Cnc 3018-Pro, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Genmitsu Cnc 3018-Pro. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Genmitsu Cnc 3018-Pro buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Genmitsu Cnc 3018-Pro currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Genmitsu Cnc 3018-Pro has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Genmitsu Cnc 3018-Pro?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Genmitsu Cnc 3018-Pro.
- Customer Ratings: Number ratings grade Genmitsu Cnc 3018-Pro objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Genmitsu Cnc 3018-Pro.
- Product Quality: You don’t always get what you pay for with an Genmitsu Cnc 3018-Pro, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Genmitsu Cnc 3018-Pro is should be an indication of how long it will work out for you.
We always remember that maintaining Genmitsu Cnc 3018-Pro information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Genmitsu Cnc 3018-Pro is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
FAQ:
Q: How big is the genmitsu CNC 3018-pro work desk?
A: The footprint of the 3018-PRO is 15.7” x 13” which means it can be placed on top of most work desks. Make sure you have at least 9.4” of clearance over the desk to keep the 3018-PRO. The small frame size makes it convenient to store it on shelves when not in use. You can engrave on workpieces with a maximum size of 11.8” x 7.1” on this CNC router.
Q: What should I upgrade my genmitsu 3018 router with?
A: Genmitsu CNC Y-Axis Expansion Guide for 3018 Series CNC Router: One of our most popular upgrades! With this upgrade kit, you can drastically increase the total size of your Y-Axis to allow for larger projects. The Genmitsu 3040 Aluminum HDF Spoilboard Extension Kit is strongly recommended for those who get the expanded Y-axis.
Q: Can a MNS PCB be made for a 3018 pro CNC?
A: Making a Motor Noise Suppression (MNS) PCB for Your Sainsmart 3018 Pro CNC Machine: The 3018 PROVer CNC comes with a circuit board integrated into the spindle to help prevent electrical noise from going from your spindle to your controller board. This guide covers how to make your own for your 3018 Pro CNC.
Q: Can A 3018 CNC be upgraded to a 3040?
A: Optional Upgraded Parts: Super Size your 3018 CNC to a 3040 by getting a Genmitsu 3040 Y-Axis Extension Kit (B08P2S3JWP). The 3040 Aluminum Spoilboard (B08VNLP24C) and 3040 MDF Spoilboard (B08WZ8RV3Y) for this extension kit are also available to buy.