Contents
The Best Harman Pellet Stove Parts of 2023 – Reviewed and Top Rated
2,704 Reviews Scanned
- [TROUBLESHOOTING IGNITERS] 1. Start your stove and visually look for the orange glow; 2. Physically feel around in the burn pot after the stove has been on for a few minutes to “feel” for heat being generated. 3.Use a DMM (Digital Multi-Meter). Gain access to the igniter and remove it from the stove or insert. If your Ohms reading is within 10%, more or less than the rating (46Ω +/- 10%).
- [FITMENT] This 306 Watt igniter is compatible with all automatic ignition Harman stoves. Was formally a 15 Fin. Compatible with all Harman models listed. P35i, P43, P61A, P68, Advance, Accentra, 52i, XXV, PF100, PB105.
- [REPLACE PART NUMBERS] Manufacture part number: 3-20-677200 Replaces part numbers: 1-10-06620, 3-20-06783.
- [TECHNICAL SPECS] Watts: 306, Length: 3.25", Width: 3/8" Rod With 1" Fins, Connectors: Male Spades.
- [SERVICE GURANTEE] Package include: 1Pc x 306 Watt Igniter. If it fails on your stove, feel free to contact us any time.
- 2399J REPLACES: Harman (HHT) 3-44-06179 Pellet Stove Gasket
- FITS: Accentra Cast (FS), Accentra 52i, Advance, Invincible Insert, Invincible RS, Invincible T, Pellet Pro II, P38 Pellet Pro +, P43, P61, P61A, P68, PC45, PF100 (Pre serial # 004351831), XXV, This gasket is one of the gaskets included in OEM #1-00-07381
- SIZE: Approximately 4-3/4'' x 4-1/4'' x 1/8'' thick
- MATERIAL: Superwool Plus paper, which is flexible, strong, seals well & withstands 2100F. Superwool is an alternative to ceramic fiber with improved health and safety attributes. Superwool products do NOT carry a GHS health hazard warning label.
- Made in the USA by Lynn Manufacturing, Inc.
- CORRECT REPLACEMENT - Specifically designed as a correct replacement for Part # 1-00-05886, superseding Control Board 3-20-05374. With this replacement control board, you can effectively restore the proper functioning of your Harman stove. It provides the necessary control and monitoring capabilities to ensure efficient operation, accurate temperature regulation, and reliable performance.
- INCLUSIVE PACKAGE - Includes replacement knobs and knob shafts, providing a comprehensive solution for your control board replacement needs. The inclusion of replacement knobs and knob shafts is advantageous for several reasons. Firstly, knobs and knob shafts can become worn out, damaged, or lost over time. By including these components in the package, you can replace the control board and any worn or faulty knobs, restoring the aesthetic appeal.
- PRODUCT DIMENSIONS - This Replacement Harman Platinum Control Board has dimensions 3 inches x 3 inches x 3 inches making it ideal and compatible with most Harman stove models. Weighing just 2 pounds, this replacement control board can snugly fit into its stove infrastructure without any fuss.
- COMPATIBLE MODELS - Suitable for Harman Advance, Accentra FS, Accentra Insert, P35I, P43, P61A, P68, and XXV stove models, guaranteeing compatibility with a range of popular Harman stoves. The Replacement Control Board is specifically designed to be compatible with the Harman XXV stove model, offering a suitable replacement option for this particular stove.
- ESSENTIAL PRECAUTIONARY MEASURES - Prior to ordering the Replacement Harman Platinum Control Board, it is crucial to ensure that you genuinely require this specific control board for your stove. Due to the nature of circuit boards, once they have been installed or used in any way, they cannot be returned for a refund or exchange. Therefore, it is essential to assess your control board's needs before purchasing.
- Highest Quality OEM Harman Replacement Igniter
- Fits Models: P35i, P43, P61A, P68, Advance, Accentra, 52i, XXV, PF100, PB105
- Exclusive 1 Year warranty with our no hassle replacement guarantee
- MADE IN THE USA - 310 Watts, 15 Fin, 120V AC
- Harman Insert Docking Gasket Replacement silicone docking gasket for Harman pellet stove inserts. Fits the following Harman pellet stove models: Accentra insert, 52i, P35i Invincible insert.
- Replacement Part 3-44-06108
- Fiits Harman Wood and Coal Stove Models:
- TLC-2000 - Pre serial # 008860001
- TL200 (Exception)
- F200 (Exception Insert)
- DVC500 (Coal Stove)
- Harman Lid SWELL LATCH P38 P43 PC45 P61 P68 PF100 1-00-199110 / AMP-199110
- Fits Models: ~ Absolute 63 ~ Allure 50 ~ Advance – All Years
- Part Numbers: 3-00-06644
- Burn Pot / Fire Pot Top Flame Guide
- Highest Quality Cast Iron
- Designed specifically for the Harman Advance, Allure 50, Absolute 63 Models - Fits all years of manufacturer
- HARMAN STOVE DISTRIBUTION / CONVECTION BLOWER
- For Harman models Models P38, P61, P68, PC45, P43, Advance
- Replaces Harman Part # 3-21-33647 / 3-21-22647
- 115V AC, 50/60 Hz, 134 CFM, Thermal Protected
- Top Quality Aftermarket Partt
- Fits Harman Models: Invincible Insert - Invincible RS
- Replacement Motor Only, No Housing
- The 5" double paddle fan blade, part # 3-20-502221, is not included.
- One Year NO Hassle Warranty
- ENHANCED HEAT DISTRIBUTION - This 5-inch double paddle fan blade effectively distributes heat throughout your stove. Its double-sided paddle design helps to evenly circulate warm air, optimizing the heating efficiency of your stove.
- HIGH QUALITY CONSTRUCTION - Crafted from high-heat aluminum, this fan blade is built to withstand the demanding conditions of stove operation. Its durability ensures that it will perform reliably and effectively over time, contributing to the longevity of your stove.
- COMPATIBLE - The HARMAN Fireplace Fan Blade, model 3-20-502221, is designed to fit a range of HARMAN stove models, including Stoves Accentra 52i, Insert Advance, Invincible Insert, Invincible RS, PP38, P43, P61, P61A, P68, XXV, PB105, PF100, DVC500, Magnum 44, BA100, BH60, BH105 and HydroFlex 60 (HF60). Its versatile compatibility ensures that it can enhance the performance of multiple stove types.
- EASY INSTALLATION - The fan blade comes equipped with a premium Allen headset screw, ensuring secure and hassle-free installation. Designed specifically for the mentioned HARMAN stove models, it is engineered to fit seamlessly, making the replacement process straightforward.
- MADE IN THE USA - This HARMAN fan blade proudly bears the Made in the USA label, emphasizing its quality craftsmanship and manufacturing. Choosing a product made in the USA often signifies attention to detail and adherence to rigorous quality standards.
- Replacement burnpot for the following Harman pellet stoves: Accentra Insert (2003-2012), Advance, P43, P43-C, XXV, XXV-TC.
- Gasket not included. If you need the gasket it is part 1-00-07381
- Replacement 3-21-08639 Combustion Exhaust Blower Fan for Harman Pellet Stove P68, XXV, P43, Advance, P61, P38, P38+, Accentra 52i, P61A, PC45, P35i, Accentra Insert, PF100, PB105, PF120, DVC 500, HF60, Accentra Cast Free Standing, P35i-C, P43-C, P61-C, P68-C, Furnace & Boiler Systems Models.
- Replacement 3-21-08639 Combustion Exhaust Blower Fan for Heatilator Eco Choice BA100, BH105, BH60, BIO120 and Archgard Optima PS1 Pellet Stove Models.
- The 3-21-08639 Exhaust Blower Motor Technical Specifications---Volts: 120 V, Amps: 0.95 A, Cycles: 60 Hz, RPM: 3000, Shaft Diameter: 5/16", Shaft Length: 1 13/16", Wire Length: 28" with ¼" Female Terminal.
- High Quality Bearing Motor---UL Certified, Powerful, Quiet, Energy Efficient and Long Lasting. 1 year warranty. Note: The Harman XXV blower motor DOES NOT come with an impeller, because Harman uses 3 different sized impellers to fine-tune how much air is moved through the stove.
- The Harman P68 pellet stove combustion exhaust blower delivers a steady stream of forced air (negative draft) through the stove in order to keep the flame burning, while allowing you to set your heat range to your desired comfort level.
- 【Compatibility】➤ 3-21-08639 Combustion Exhaust Blower Fan Replacement for Harman Pellet Stove Accentra 52i, Advance, HF60, P38, P38+, P43, P43-C, P61, P61-C, P61A ,P68, P68-C, PB105, Furnace & Boiler Systems, PF100 (high altitude only), XXV(25th Anniversary Model).
- 【The 3-21-08639 Exhaust Blower Motor Technical Specifications】★ Volts: 120 V, ★ Amps: 0.95 A, ★ Cycles: 60 Hz, ★ RPM: 3000, ★ Shaft Diameter: 5/16", ★ Shaft Length: 1 13/16", ★ Wire Length: 28" with ¼" Female Terminal.
- 【High Quality】This Harman P43 pellet stove blower includes 100% ball bearing replacement blower. UL Certified, Powerful, Quiet, Energy Efficient and Long Lasting. 1 year warranty.
- 【Easy to install】The harman P61 exhaust blower motor is complete assembly, includes 3-21-08639 exhaust blower motor with 28" wire, and 3-20-502221 double paddle fan blade.
- The Harman P68 pellet stove combustion exhaust blower delivers a steady stream of forced air (negative draft) through the stove in order to keep the flame burning, while allowing you to set your heat range to your desired comfort level.
Last update on 2023-08-04 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Harman Pellet Stove Parts?
Do you get stressed out thinking about shopping for a great Harman Pellet Stove Parts? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Harman Pellet Stove Parts, which is why we have assembled a comprehensive list of the greatest Harman Pellet Stove Parts available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Harman Pellet Stove Parts that you consider buying. Your questions might include the following:
- Is it worth buying an Harman Pellet Stove Parts?
- What benefits are there with buying an Harman Pellet Stove Parts?
- What factors deserve consideration when shopping for an effective Harman Pellet Stove Parts?
- Why is it crucial to invest in any Harman Pellet Stove Parts, much less the best one?
- Which Harman Pellet Stove Parts are good in the current market?
- Where can you find information like this about Harman Pellet Stove Parts?
We’re convinced that you likely have far more questions than just these regarding Harman Pellet Stove Parts, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Harman Pellet Stove Parts, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Harman Pellet Stove Parts. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Harman Pellet Stove Parts buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Harman Pellet Stove Parts currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Harman Pellet Stove Parts has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Harman Pellet Stove Parts?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Harman Pellet Stove Parts.
- Customer Ratings: Number ratings grade Harman Pellet Stove Parts objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Harman Pellet Stove Parts.
- Product Quality: You don’t always get what you pay for with an Harman Pellet Stove Parts, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Harman Pellet Stove Parts is should be an indication of how long it will work out for you.
We always remember that maintaining Harman Pellet Stove Parts information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Harman Pellet Stove Parts is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
FAQ:
Q: What is Harman stove this?
A: Harman Stoves specializes in manufacturing and distribution of premium wood and pellet stoves. The company was founded by Dane Harman in 1979. Its headquarters is based in Lakeville, Minnesota, United States. Harman Stoves is a subsidiary of Hearth & Home Technologies Inc.
Q: What is a pellet heater?
A: What is a Pellet Heater. Pellet heaters, also called pellet ovens or stoves, are an efficient, clean way of heating your home. Instead of using chopped wood for heating, pellet heaters use sawdust or shavings, which are byproducts of the timber industry, compressed into pellets for use in these heaters.
Q: What is pellet burners?
A: A: A pellet stove is a stove that runs using wood (or biomass) pellets that burn and heat your home. It works by feeding the pellets from the hopper down into the burn area.
Related Post:
- England’S Stove Ac 3000 Pellet Stove Vent Kit 3
- Breckwell Pellet Stove Parts
- Castle Serenity Pellet Stove Parts
- breckwell pellet stove parts
- Pelpro Pp130 Pellet Stove
- Pelpro Pp130 Pellet Stove
- Pellet Stove Glass Cleaner
- St Croix Auburn Pellet Stove
- King Ashley Pellet Stove
- 2 Inch Flex Pipe For Pellet Stove