Skip to content

20 Best Honda Civic Tail Light Bulb Socket of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best Honda Civic Tail Light Bulb Socket of 2023. Check our ranking below.

2,814 Reviews Scanned

Rank No. #1
Gorniloxam Rear Tail Light Brake Lamp Socket, Replacement for Honda Accord Civic 1998-2015 For Fit 09-13 For Acura CL RL, Replaces OE: 33515-S50-003 (Turn Signal Lights Wire Harness Plug Holder)(2PCS)
  • Lamp Socket Fit: For Honda Fit 2009-2013, For Honda Civic 1999-2015, For Honda Accord 1998-2015, For Honda Accord Hybrid 2005, For Acura CL 2001-2003, For Acura RL 1999-2004, For Acura TSX 2004-2014.
  • OE Number of Tail Light Brake Lamp Socket: 33515-S50-003 Socket (T20W W), 33515S50003, 645-937. Please check your make, model, year and OE number before purchase.
  • Waterproof seal: with silicone rubber o ring, seal tightly, no dirt and water in and/or fall. the terminals are not easily corrosion or rust.
  • No Loose Connection: the Connects are aligned for bulbs. The socket Clasp holds the bulb tight. the product lock in place. No looseness, no noise, no sliding out of the slot.
  • Plug and Play: just pry out the old melted or corroded connectors and replace is new sockets. smear some bulb grease on the base of bulbs for a longer service time. fix the hyper flash and intermittent bulb failure effectively. ensure driving safety.
Rank No. #2
A ABSOPRO Car Light Socket Wire Harness Pigtail Socket Turn Signal Lamp Brake Light Socket for 7443 Bulbs for Acura CL RL TSX for Honda Accord Civic FIT
  • Replacement For - Suitable for Acura CL 2001-2003, for Acura MDX 2001-2006, for Acura RDX 2007-2012, for Acura RL 1999-2004, for Acura TL 2000-2003, for Acura TSX 2009-2014, for Honda Accord 4-Door 1998-2012, for Honda CR-V 1998-2011, for Honda Civic 4-Door 1999-2014, for Honda Element 2003-2011.
  • Function - Lamp Socket provides a connection for light bulb contacts to operate the bulb and offer good abrasions and moisture.
  • Material - Wire Harness Pigtail Light Socket is made of durable plastic, which has stable characteristics, steady electrical performance and good reliability for long time use.
  • Plug and Play - Just pry out the old Light Socket and plug with these new sockets into your turn signal, brake, daytime running assembly.
  • Package List - 1 pcs Brake Tail Light Adapter Socket.
Rank No. #3
A ABSOPRO Turn Signal Tail Light Bulb Socket Holder 33302-S5A-A01 for Honda Civic 2001-2003
  • Replacement For - OE Number 33302-S5A-A01; suitable for Honda Civic 2001-2003
  • Function - Suitable for turn signal lights, tail light parking light lamp holder, tail lamps.
  • Material - The light socket is made of durable metal and plastic material, durable and have good conductivity.
  • Installation - Professional installation is highly recommended.
  • Package List - 1 pc Light Socket
Rank No. #4
Duokon Rear Tail Light Lamp Bulb Socket Holder, Tail Lamp Bulb Socket Holder 33514-S2R-003 for ACCORD CIVIC CITY
  • Premium material ----- Taillight bulb socket is made of high quality ABS material for maximum durability, it has long service life
  • High quality ----- Rear tail light lamp Bulb Socket Holder is Professional manufacturing, with high accuracy and reliability
  • Perfect choice ----- Taillight socket is conform to strict quality control standards, dependable to use, direct replacement for the old or broken one
  • Compatibility----- Tail lamp socket is suitable for Honda ACCORD, CIIMO, CITY, CIVIC, C-RV, FIT, ODYSSEY, SPIRIOR and more series
  • Easy to install ----- LED bulbs socket Holder is easy to install, no complicated tools required, which is convenient to use
Rank No. #5
X AUTOHAUX 2pcs Rear Tail Light Brake Lamp Socket Turn Signal Lights Wire Harness Plug Holder 33515S50003 For Honda Accord Civic 1998-2015 For Honda Fit 09-13 For Acura CL RL TSX Lamp Socket
  • [OE Number] 33515-S50-003 Socket (T20W W), 33515S50003, 645-937.
  • [Fitment] For Honda Fit 2009-2013, For Honda Civic 1999-2015, For Honda Accord 1998-2005 2008-2015, For Honda Accord Hybrid 2005, For Acura CL 2001-2003, For Acura RL 1999-2004, For Acura TSX 2004-2014. Please check car make, model, year and OE number before purchase.
  • [Features] Performance as original part, no water get in, fix the light flash and intermittent bulb failure effectively, make sure bulb connection are touching inside the socket box, ensure driving safety.
  • [Installation] Plug and play. No rewiring or modification, just take out the old socket off and replace is new, it's recommend to replace the melted or corroded connectors, and smear some bulb grease on the base of bulbs for longer servie time.
  • [Package] Include 2x Tail light socket. Please confirm relevant video if replace it in doubt.
Rank No. #6
XtremeAmazing Tail Light Socket Rear Turn Signal Taillight Lamp Wire Harness Holder Pack of 2
  • 3-Pin
  • Replaces part number: 33515-S50-003,33515S50003.
  • Compatible with Honda Accord 1998-2017, Civic 1999-2015, Odyssey 1999-2010.
  • Package Contents: 2 x Tail Light Socket
Rank No. #7
Dorman 645-933 Back Up Lamp Socket Compatible with Select Acura / Honda Models
  • Direct replacement - this back up light socket is designed to match the fit and function of the original socket on specified vehicles
  • Ideal solution - this socket is a reliable replacement for an original socket that is missing, failed or corroded due to water or debris infiltration
  • Durable construction - this socket is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
SaleRank No. #8
Dorman 645-937 Brake Lamp Socket Compatible with Select Acura / Honda Models
  • Direct replacement - this brake light socket is designed to match the fit and function of the original socket on specified vehicles
  • Ideal solution - this socket is a reliable replacement for an original socket that is missing, failed or corroded due to water or debris infiltration
  • Durable construction - this socket is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
SaleRank No. #9
A ABSOPRO Turn Signal Tail Light Socket Tail Lamp Plug Connectors Holder for Honda Accord 2001-2007 for Honda Civic 1992-2011 (Set of 2)
  • Replacement For - Suitable for Honda Accord 2001-2007, for Honda Civic 1992-2011.
  • Function - Wiring Harness Plug Connectors Holder with clasps can hold and provides a connection to the car bulb tight to solve the light very dim or not work, the socket is short out, burn or melt.
  • Material - Tail Light Socket is made of durable plastic, with rubber o ring, seal tightly, no water gets in, and the terminal is not easy corrosion or rust.
  • Plug and Play - Just pry out the old Headlight Socket and plug with these new sockets into your headlamp, tail light or turn signal lights assembly.
  • Package List - 2 pcs Turn Signal Tail Light Socket.
Rank No. #10
USTOPF1T 1157 LED Bulb Socket Plug, Signal Light Socket Wiring Harness, Automotive Plastic Waterproof Turn Signal Tail Light Brake Light Base Plug Connector - 2PCS
  • Material: This bulb socket is made of nylon material and copper wire, high temperature resistant, waterproof and not easy to break.
  • Size: Size: 15 x 3.5cm / 5.9" x 1.38"(L*D); Wire length: As shown in the figure; Net weight: 20g.
  • Features: 1157 BAY15D lampholder with front wired socket for easy plug-and-play installation.
  • Replacement: Great replacement part for your car to keep the 1156(BA15S) LED bulb good, stable and sturdy.
  • Compatible bulbs: 1157 1016 1034 1152 1154 1158 1493 2057 2357 2397 7528 3496.
Rank No. #11
iJDMTOY Pair OE-Spec 7443 Brake Tail Light Adapter Socket Compatible with Acura CL RL TSX Honda Accord Civic FIT, etc
  • Compatible with 2001-2003 Acura CL, 1999-2004 Acura RL, 2004-2014 Acura TSX, 2011-2015 Honda Accord, 2012-2015 Honda Civic and 2012-2013 Honda FIT
  • One pair, made with OEM spec high quality heat resistant nylon plastic
  • 3 pin/wire configurations good for tail lamp brake/stop light or turn signal
  • Direct replacement, good for repair, replace or retrofit
Rank No. #12
X AUTOHAUX 2 Pcs Turn Signal Light Socket Pigtail for Honda Accord Odyssey Pilot Civic CR-V Crosstour Element 1992-2015 Turn Signal Connector with Wire Harness Replaces 33302-SR3-A01
  • [Part Number] 33302-SR3-A01
  • [Fitment] for Honda Accord 1998-2012; for Honda Civic 1992-2011; for Honda Civic del Sol 1993-1997; for Honda CR-V 1997-2001, 2012-2014; for Honda Crosstour 2012-2015; for Honda Element 2009-2011; for Honda Odyssey 1995-2004; for Honda Pilot 2003-2005
  • [Pros] Original size, direct replacement. Improved process, tighter connection with the bulb, better contact.
  • [Function] Match the fit and function of the original socket on specified vehicles. A reliable replacement for an original socket that is missing, failed or corroded due to water or debris infiltration.
  • [Package] 1x Turn Signal Socket. Please confirm your car model and OE number before purchasing. Please check relevant operation video when you replace it.
Rank No. #13
X AUTOHAUX 2pcs Turn Signal Light Bulb Socket Front Tail Light Lamp Blinker Holder Base 33302-S5A-A01 Fit for Honda for Acura
  • Fitment: for Honda Accord Crosstour EX, EX-L 3.5L V6 - Gas 2010 2011, for Honda Civic DX, EX, GX, LX 1.7L L4 - CNG, 1.7L L4 - Gas 2001 2002, for Honda Civic DX, EX, GX, Hybrid, LX 1.3L L4 - Electric/Gas, 1.7L L4 - CNG, 1.7L L4 - Gas 2003, for Honda Crosstour EX, EX-L 2.4L L4 - Gas, 3.5L V6 - Gas 2012-2015, for Honda CR-V EX, LX 2.4L L4 - Gas 2002-2004, for Honda CR-V EX, EX-L, LX 2.4L L4 - Gas 2012-2014, for Honda CR-V EX, EX-L, LX, Touring 2.4L L4 - Gas 2015, OE Number: 33302-S5A-A01
  • Stop Water Leaking: with silicone rubber o ring, seal tightly, there will be no water gets in, fix the hyper flash and intermittent bulb failure effectively, and make sure bulb connection is touching inside the socket box.
  • Function: Suitable for turn signal lights, tail light parking light lamp holder, tail lamps.
  • Easy to Install: No rewire or modification needed, just pry out the old one off and replace it with these new sockets, good replacement for melted or corroded connectors, its better to put some bulb grease on the base of bulbs for longer working time.
  • Package Included: 2 x Car Turn Signal Light Bulb Socket Note: Please confirm the fitment before purchasing the product.
Rank No. #14
SEALIGHT [2023 New Upgrade] 7440 7443 LED Brake Lights Bulbs, Red Flashing Stop Bulbs, Super Bright T20 W21W 7441 7444 LED Lights with Projector Lenses for Stop Blinker Tail Brake Lights, Pack of 2
  • 【1000% Increase Brightness】SEALIGHT 2024 New J2 Series - 7443 7440 led bulb brake lights to own 1800LM brightness with 9500K super red light, that means even in foggy weather and other adverse weather conditions, other vehicles can clearly see your brake signal.
  • 【Applicable Bulb Models】Tail Lights Bulbs, Brake Lights, Blinker Lights, Red Flashing Stop Bulbs. Fits for 992, 7440, 7441, 7443, 7442, 7444, W21W, WY21W, 7440NA, 7440NAK, 7444NA,7444NAK, 7443LL.etc.
  • 【200% Faster Heat Dissipation】2023 New Upgrade - Made of aircraft grade aluminum and great solid connection with the socket, which means the 7443 7440 led bulb will work just fine at least 10 years
  • 【5 Minute Installation】Non-Polarity, Plug-N-Play and the Same-Size with halogen design allow you can install 7443 7440 led back up light easy even if you have no experience before.
  • 【Attention】The size of the bulb socket may vary depending on the vehicle trim. Please carefully check the owner's manual or the original bulb size before ordering. Please refer to the note on Amazon Fitment, which provides detailed adaptation models and applicable locations.
SaleRank No. #15
2 Pcs Plastic Bulb Socket Lamp Extension Holder Connector,LED 1156 Bulb Socket Holder, Waterproof Car Turn Signal Tail Stop Rear Brake Light Base Harness Plugs Connectors Pre-Wired Wiring Sockets
  • [Socket Name] 1156 (BA15S) socket
  • [Size] The size of 1156 LED bulb socket is 5.9 "x 1.4" (L * D); Wire length: 4.3 inches.
  • [Durable]The car brake light lamp holder is made of high-quality plastic and metal, waterproof and durable.
  • [Function] Provide excellent replacement parts for your car to keep the 1156 (BA15S) LED bulb good, stable and firm.
  • [Application] The 1156 base harness plug connector can be used for the modification of brake light, steering light and reversing light.
Rank No. #16
iJDMTOY (2) 168 194 2825 W5W 920 921 T10 T15 Rubber Base Socket/Base w/Pigtail Wiring Harness As Repair, Replacement or Retrofit
  • 2 pieces pre-wired T10/T15 socket/base adapters
  • Made with universal fit heat resistant rubber base socket with 6" pigtail wires
  • Compatible bulb size: wedge base 158 161 168 175 190 194 1250 1251 1252 PC175 2821 2825 2827 906 904 912 916 918 926 927 W5W W16W, etc
  • Perfect for repair, replacement or retrofit, good for both LED bulbs or incandescent bulbs
Rank No. #17
HERCOO Turn Signal Tail Light Socket Tail Lamp Lights Wiring Harness Plug Connectors Holder Compatible With Dodge Ram 1500 2009-2020 Ram 2500 3500 2010-2020, Pack of 2
  • FITMENT: Compatible with Dodge Ram 1500 2009 to 2010, Dodge Ram 2500/3500 2010, Ram 1500/2500/3500 2011 to 2020
  • PACKAGE INCLUDES: 1 Pair Tail light turn signal socket
  • APPLICATION & HIGH QUALITY: Tail light turn signal lights's high quality clasps can hold the bulb tight does not loosen when connected, the terminal is not easy corrosion or rust.
  • EASY TO INSTALL: Plug and play, no rewire. Direct replacement for factory parts number 68226719AA, no modification needed
  • 1 YEAR MANUFACTURER WARRANTY: Since order purchase date; feel free to send email if there's any issue before or after purchase; your case will be taken seriously regardless of warranty period
Rank No. #18
AUXITO Upgraded 7440 7443 LED Bulb Red for Tail Lights Brake Lights, Super Bright T20 W21W 7441 7444 LED Replacement for Stop Tail Brake Signal Lights, Pack of 2
  • Non-polarity. Can be used for brake lights, tail lights, stop lights, parking light, daytime running light, etc. Some sensitive vehicles will meet canbus issue after installing, load resistors or flasher relay will be required to solve these issues, you can contact us through Amazon Buyer Message to get help and solutions
  • Low power and high brightness. 5.5W per 7443 led red bulb. Only 1/4 energy consumption of original 7443 red bulb but 4 times brighter. Built in smart IC driver ensure constant current, no radio interference. Plus instant-on capability with zero warm-up time
  • Unique imitated halogen shape design. Resembling halogen bulb shape design and sequencing 54 pieces 4014-SMD LED chips precisely around the light. Delivering 360° high luminous efficiency with full amber light, easier to be noticed and safer to drive
  • Small size comparable to OEM 7440 bulbs Non-polarity, applied to US standard and CK sockets. Fits: 992, 7440, 7441, 7443, 7442, 7444, W21W, WY21W, 7440NA, 7440NAK, 7444NA,7444NAK, 7443LL.etc. Amazon filter system may not be 100% accurate or up to date, if you are not sure which bulb model fit your vehicle, please check your vehicle owner manual to confirm or ask a question for help
  • Electroplating process housing. Improves oxidation resistance and produces less heat. High-end styling, matching great in the assembly. Ideal replacement for your halogen 7440 red bulbs
Rank No. #19
SYLVANIA - 7443 Long Life Miniature - Bulb, Ideal for Daytime Running Lights (DRL) and Back-Up/Reverse Lights (Contains 2 Bulbs)
  • LIGHTS DIM OVER TIME, REPLACE IN PAIRS: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind.
  • EASY TO REPLACE: Sylvania Long Life miniature bulbs are easy to install and show instant results.
  • LOW MAINTENANCE AND HIGH DURABILITY: Designed for durability, greater safety, and lower maintenance by the leading supplier of automotive lighting.
  • LONGER LIFE THAN MOST STANDARD BULBS: Long Life bulbs perform twice as long as any other standard miniature bulbs.
  • THE SYLVANIA STANDARD OF QUALITY: With 100+ years in business, Sylvania is the world leader in automotive lighting for Original Equipment Manufacturers (OEMs) and the aftermarket.
Rank No. #20
EverBright BAY15D 1157 Socket Adapter Pigtail Harness Wiring Replacement Turn Signal Bulb Brake/Tail Lights Backup Light Pre-Wired Wiring Sockets, Pack of 2
  • BAY15D 1157 light socket replacement retrofitting, repairing or replacing LED or incandescent light bulbs
  • This 1157 pigtail is a pre-wired socket and so easy installation, just plug and play. Waterproof and heavy duty with high efficiency and resistant to heat
  • Compatible bulb size: BAY15d 1016 1034 1076 1130 1154 1157 1158 1493 2057 2357 2397 7528 P21/5W
  • Please double check the product pictures or video to make sure this 1157 socket adapter is the same as your original to ensure proper fitting
  • Warryany: ONE YEAR, Package Included: 2Pack of 1157 socket 3 Wires

Last update on 2023-08-19 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Honda Civic Tail Light Bulb Socket?

Do you get stressed out thinking about shopping for a great Honda Civic Tail Light Bulb Socket? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Honda Civic Tail Light Bulb Socket, which is why we have assembled a comprehensive list of the greatest Honda Civic Tail Light Bulb Socket available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Honda Civic Tail Light Bulb Socket that you consider buying. Your questions might include the following:

  • Is it worth buying an Honda Civic Tail Light Bulb Socket?
  • What benefits are there with buying an Honda Civic Tail Light Bulb Socket?
  • What factors deserve consideration when shopping for an effective Honda Civic Tail Light Bulb Socket?
  • Why is it crucial to invest in any Honda Civic Tail Light Bulb Socket, much less the best one?
  • Which Honda Civic Tail Light Bulb Socket are good in the current market?
  • Where can you find information like this about Honda Civic Tail Light Bulb Socket?

We’re convinced that you likely have far more questions than just these regarding Honda Civic Tail Light Bulb Socket, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Honda Civic Tail Light Bulb Socket, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Honda Civic Tail Light Bulb Socket. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Honda Civic Tail Light Bulb Socket buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Honda Civic Tail Light Bulb Socket currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Honda Civic Tail Light Bulb Socket has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Honda Civic Tail Light Bulb Socket?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Honda Civic Tail Light Bulb Socket.
  5. Customer Ratings: Number ratings grade Honda Civic Tail Light Bulb Socket objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Honda Civic Tail Light Bulb Socket.
  7. Product Quality: You don’t always get what you pay for with an Honda Civic Tail Light Bulb Socket, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Honda Civic Tail Light Bulb Socket is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Honda Civic Tail Light Bulb Socket information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Honda Civic Tail Light Bulb Socket is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: