Contents
The Best hydraulic hose crimp tool of 2023 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best hydraulic hose crimp tool of 2023. Check our ranking below.
2,762 Reviews Scanned
SaleRank No. #1
iGeelee Hydraulic Hose Crimper AC Crimping Tool for Barbed and Beaded Hose Fittings, Air Conditioning Repaire Ac Hose Crimper with 7 Die Set（IG-71500)
- 💎 Portable and lightweight hand-held crimping tool, perfect for shop and field applications, ensuring convenience on the go.
- 💎 Easily mount the crimper to a bench using the holding fixture or securely hold it in a vice for stable and precise crimping.
- 💎Snap-on dies for quick and effortless installation, eliminating the need for pins or screws, saving you time and effort.
- 💎 Complete set of dies included, covering a wide range of hose sizes: #6(5/16"), #8(13/32"), #10(1/2"), #12(5/8"), and reduced barrier hose sizes.
- 💎 Enhanced safety with included safety goggles. Note: #8SRB and #6 dies are the same, distinguished by their purple color.
Rank No. #2
iGeelee Manual Hydraulic A/C Hose Crimper Automotive A/C Hose Crimping Tools for BH Air Conditioning Hose & Beadlock A/C Fittings（IG-7842P)
- 💎 Applicable for bead locking fitting. The crimping tool has a base that can be mounted to a bench for easy use,or the base can be held by any vise
- 💎7 die sets for hose sizes: #8(13/32”),#10(1/2”),#12(5/8");Reduced Barrier Hose:#6SRB(5/16"), #8SRB(13/32"), #10SRB(1/2"), #12SRB(5/8")
- 💎The dies snap quickly into the press fixture requiring no pins or screws. Kit comes in custom molded
- 💎This A/C Hose Crimper can be easily mounted to a bench using the holding fixture or held securely in a vice.
- 💎The pressure of hydraulic repair tool can not exceed 40MPa, it only use for aluminum material.
Rank No. #3
Mophorn Hydraulic Hose Crimper Hydra-Krimp 71500,Manual AC Hose Crimper Kit Air Conditioning Repaire Handheld,Hydraulic Hose Crimping Tool with 7 Die Set, for Barbed and Beaded Hose Fittings
- Durable Crimping Tool: Our crimper is made of aluminum alloy material, ensuring its durability. Stamper hardness can reach up to 53 HRC to bear a large force. And it equipped with 7 dies, size: #6, #8, #10, #12(5/16", 13/32", 1/2", 5/8") and reduced barrier #8, #10, #12(13/32", 1/2", 5/8").
- Integral Hydraulic: This hand-held integral hydraulic press A/C hose crimper is made for easy use. The hydraulic tool is designed with exquisite details, such as a pressure relief valve and no-leakage oil cylinder.
- Instant Setup: Our hydraulic crimper can be installed according to the following steps: First, select the correct die to insert, insert the pin, then turn the tool's body clockwise until dies are snug against hose fitting. Turn the valve to work position, pump the handle until stop. Finally, you can get the hose crimped.
- Lightweight & Compact: One-person operation saves your time and energy. Besides, the crimping tool kit is stored in a plastic toolbox, reducing the possibility of missing parts. It is compact and easy to carry.
- Wide Application: The crimping tool has a base that can be mounted to a bench for easy use, or the base can be held by any vise. It is compatible with the project car's AC lines, bead locking fitting, and A/C hose.
Rank No. #4
AMZCNC 71500 Hydraulic A/C Hose Crimper Hydra-Krimp Manual A/C Hose Crimper Kit Air Conditioning Repaire Handheld Hydraulic Hose Crimping Tool
- 【Handheld Sized】The lightweight hand-held hydraulic press is very portable.
- 【Easy to use】Crimping pipes and fittings in an easy and labor-saving way.
- 【Function】The kit is applicable for beadlocking fitting and barrier A/C hose.
- 【Economic performance】The dies snap quickly into the press fixture requiring no pins or screws.
- 【Overall Performance】The Kit comes with a complete set of dies covering hose sizes: 6 SRB, 6-8 SRB, 10 SRB,12 SRB, #8, #10,#12.Always wear safety goggles when operating
Rank No. #5
Hydraulic AC Crimping Tool Hydraulic AC Hose Crimper Manual A/C Hose Crimper Kit Air Conditioning for Barbed and Beaded Hose Fittings Auto Reparing Tool (IG-7842M w/Manual Pump)
- 📘【Excellent Performace】The aluminum alloy pump is lighter in weight, and the hand‑held detachable hydraulic design makes the manual air conditioning hose compressor easier to use.
- 📘【Seven Die Sets】Including 7 die sets for hose sizes, #6/8SRB= (13/32in) #8 (13/32in), #10 (1/2in), #12 (5/8in); Reduced Barrier, #6SRB (5/16in), #8SRB/#6 (13/32in), #10SRB (1/2in), #12SRB (5/8in). Note: #6 and 8SRB are in the same die set (Purple Die)
- 📘【WIDE APPLICATION】The crimping tool has a base that can be mounted to a bench for easy use,or the base can be held by any vise. Customize the project cars AC lines.
- 📘【Easy to Store】Hose Crimper Kit comes with a whole set of accessories and one storage box, which makes it easier for you using. Easy to store, easy to organize, avoid missing.
- 📘【Quality Test】This product has been fully tested before leaving the factory to ensure that it provides you with a satisfactory experience
Rank No. #6
REDLOONG hydraulic hose crimper ac crimping tool machine with dies Handheld Hydraulic Hose Crimping Tool Hydra-Krimp 71500 Manual A/C Hose Crimper Kit Air Conditioning Repaire (71500 Blue)
- Durable Crimping Tool: Our crimper is made of aluminum alloy material, ensuring its durability. Stamper hardness can reach up to 53 HRC to bear a large force. And it is equipped with 4 dies, size: 6 SRB, 6-8 SRB, 10 SRB,12 SRB, #8, #10,#12
- Factory direct sales, after - sale maintenance accessories update guaranteed
- The kit is applicable for beadlocking fitting and barrier A/C hose
- Crimping pipes and fittings in an easy and labor-saving way
- The lightweight hand-held hydraulic press is very portable.
Rank No. #7
12Pack 1/2" Hydraulic Hose Fitting-1/2" Hose x 1/2" JIC 37° Female Hydraulic Hose End Swivel Crimp Compatible with Dayco Weatherhead U-Series …
- Heavy Duty Construction:The 1/2"JIC 37° flare hydraulic hose fitting is made of high quality carbon steel
- Our 1/2" jic hydraulic fittings use for hydraulic systems with petroleum etc fluids power systems or other industrial hydraulic applications
- Compatible with Weatherhead U-Series/Dayco or other adjustable crimpers
- Female End(1/2" JIC 37 degree hydraulic fitting crimped end) ---Inner Dimeter(I.D.):11/16"(0.69")
- Male End(JIC 37° end)----Outer Diameter(O.D.): 3/4"(0.75"),Hydraulic Hose-Inner Dimeter (I.D.):1/2"
Rank No. #8
BANCHEE Hydraulic Hose Crimper AC Crimping Tool for Barbed and Beaded Hose Fittings, Air Conditioning Repaire Ac Hose Crimper with 7 Die Set（ BC-71500）
- ⭐【Light weight】Portable and lightweight hand-held hose crimping tool, perfect for shop and field applications, ensuring convenience on the go.
- ⭐【Multiple mold matching】The crimping including 7 die sets for hose sizes, #6/8SRB= (13/32in) #8 (13/32in), #10 (1/2in), #12 (5/8in); Reduced Barrier, #6SRB (5/16in), #8SRB/#6 (13/32in), #10SRB (1/2in), #12SRB (5/8in). Note: #6 and 8SRB are in the same die set (Purple Die).
- ⭐【Scope of application】Repair of air conditioning hoses on automobiles, The ac hose crimper is apply for beadlocking fitting and barrier A/C hose.
- ⭐【Efficient and convenient】Manual hydraulic crimping tools are simple to use, convenient to carry, save time, and report maintenance efficiency.
- ⭐【Simple operation】The die of the hydraulic hose crimper can be quickly clamped into the pressure fixture without pins or screws.
Rank No. #9
AMZCNC Professional Hydraulic Crimping Tool with 12 Ton Output Pressure and 9 Standard US Dies (Crimps 8 AWG to 4/0 AWG)
- Versatile Crimping Capability: Our hydraulic crimping tool offers a powerful 12-ton output pressure and comes with a set of 9 standard American Wire Gauge (AWG) crimping dies, ranging from 8AWG to 4/0AWG. This tool can crimp copper and aluminum wires with ease, making it perfect for a variety of applications.
- Standard American Wire Gauge (AWG) Dies: Our crimping dies are all standard AWG sizes, ensuring that they will fit American-style terminals perfectly. The set includes dies for 8AWG, 6AWG, 4AWG, 2AWG, 1AWG, 1/0AWG, 2/0AWG, 3/0AWG, and 4/0AWG wires, so you can tackle a wide range of crimping jobs.
- Easy to Use: The H-shaped head allows for easy mid-span cable crimping, and the quick switch and rubber-coated handle provide comfortable and efficient operation. With the proper die in place, you can complete your crimping projects quickly and easily.
- Durable and Reliable: Made from high-quality steel, our tool and dies have been hardened for strength and coated for corrosion resistance, ensuring that they will last for years to come. The hydraulic system is stable and rarely malfunctions, providing you with reliable performance every time.
- Satisfaction Guaranteed: We are committed to providing you with the best possible crimping tool and accessories. If for any reason you are not completely satisfied with our product, we offer a 100% satisfaction guarantee, with a full refund or free exchange within 1 year of purchase.
Rank No. #11
Hydraulic Crimping Tool and Cable Cutter Hydraulic Cable Lug Crimper 8 US TON 12 AWG to 00 (2/0) Electrical Terminal Cable Wire Tool Kit with 10 Die (YQK-70)
- Hydraulic crimping tool 10 pairs of dies: 12.10.8.6.4*2.2.1/0. 2/0 AWG and 1/8 "for stainless steel wire rope
- 【Wide Application】 The crimper tool is great for battery and welding cables , power Wires , and electrical cables ,even can be rotated 180° freely for narrow space working
- 【Comfortable grip】 The vinyl-dipped grip is very comfortable and easy to use and Wont slip
- 【Easy operation】The mold can be easily replaced by one-way fixed latch
- 【Low temperature operation】: The product adopts a brand new upgraded hydraulic oil, which can work normally even in cold weather below -45 ℃.
Rank No. #12
BLIKA Upgraded 10 Ton Hydraulic Cable Crimper Hand Tool for 1/8" to 3/16" Stainless Steel Cable Railing Fittings, Heavy Duty Head with 11 Dies, Cable Railing Crimping Tool, Hydraulic Crimping Tool
- 【Compatibility】Crimps 12 AWG to 2/0 AWG size copper and aluminum wires. Maximum crimping power: 10 tons. Crimping Stroke : 12mm. The hydraulic crimper's head can be rotated 180° freely to benefit narrow space working, a good choice for battery and welding cables, power wires, electrical cables, cable railing hardware etc. On/Off control for fast operation, easy crimping and arm retraction when crimping cable railing hardware.
- 【Heavy Duty Durable Design】Hardened steel with stainless steel coating and with C shape head, this design solve the problem that the head will be broken after crimping multi times. High hardness hex dies are thickened and durable for Stainless steel terminal fitting. Vinyl-dipped grip for comfort and easy control.
- 【11 Pcs Crimping Dies】Hydraulic crimping tool comes with crimping dies for 1/8", 3/16", 12 AWG, 10 AWG, 9 AWG, 8 AWG, 6 AWG, 4 AWG, 2 AWG, 1 AWG and 2/0 AWG cables and creates strong, hexagonal crimps for a clean, efficient look for your projects. 1/8" and 3/16" hydraulic crimping dies fit for 1/8" to 3/16" Cable Railing.
- 【Sharp & Precise Cable Cutters】Cable cutter is suitable for your cable railing project. A small squeeze is all it takes to get a smooth, clean cut, without distorting the end profile of the cable. Ergonomic one hand operation design, can easily be operate or locked with a safe and robust system by using just one hand for saving labor.
- 【Package List】1X hydraulic crimper tool + 11 pairs of crimping dies + 1X black cable cutter + 1X seal rings + 1X carrying case. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement. If you have any issues about our products and need any help, please kindly contact our after sale service.
SaleRank No. #13
Interstate Pneumatics H8 Heavy Duty Standard Hose Crimper with 5 Dies
- Made of ductile cast iron and heat treated steel dies
- Extra thick die carriage and a thicker hinge point for extra strength
- Dies are compatible with dies available from other brands | Comes with five dies for crimping
- Die Sizes: 0.48", 0.52", 0.58", 0.62", 0.67"
- 1/4" One Braid, 5/16" One Braid, 5/16" Two Braid, 3/8" One Braid & 3/8" Two Braid PVC & Rubber Hoses can be crimped with this crimper |Mounting Holes for permanent benchtop installation
SaleRank No. #14
Leberna 115 Pcs 304 Stainless Steel Stepless Single Ear 7-29mm Hose Clamps with Pincers Crimper Tool Kit | Securing Pipe Hoses Automotive | Cinch Rings Pinch Clamp, Crimp Clamp Assortment PEX Crimping
- 【Corrosion-Resistant】TUV approved, high precision single ear stepless hose clamps are made of 304 stainless steel. These clamps are anti-rust and corrosion resistant, a good choice for long-term use. Hose clamps are used to seal various types of hoses. Included pincer is used to increase clamp force. The jaws of the crimper are made of chrome vanadium steel, which is durable and will not collapse or deform. It is the perfect design for repairing pipes & plumbing systems.
- 【Cochlear Design】Cochlear design ensures continuous clamping during temperature changes, machine variations, or dimensional changes. The pipe is always in good sealing and fastening status.
- 【Polished Smooth Edge】The edge of all clamps are polished smooth, and they will not damage the hose. 360 ° Stepless Design, no inner protrusion/gap and Narrow band design provide a more centralized seal pressure.
- 【COMPLETE SPECIFICATIONS】This single ear hose clamp set comes with 10 common sizes: 6-7 mm, 7-8.7 mm, 8.8-10.5 mm, 10.3-12.8 mm, 12.8-15.3 mm, 15.3-18.5 mm, 17.8-21.0 mm, 20.3-23.5 mm, 22.4-25.6 mm, 25-28.6 mm. They are widely used in hoses and plastic pipes, especially suitable for plumbing, beverage, automotive, marine, motorcycle, and industrial applications. One Ear Clamp Pincer is included in this kit. The pincer has a plastic coated handle, easier to use when sealing the hose.
- 【SATISFACTION GUARANTEED】Leberna 115 Pcs 304 Stainless Steel Stepless Single Ear 7-21mm Hose Clamps with Pincers Crimper Tool Kit makes perfect toolset for household or industrial use. If for any reason you are not satisfied, return within 30 days. No question asked.
Rank No. #15
Hydraulic A/C Hose Crimper Manual Auto Fuel Hose Line Crimping Tool Crimps Barbed and Beaded Fittings For Air Conditioning Hose
- ★ Comes with four die sets for hose sizes (#6, #8, #10, & #12) and base for bench mounting.
- ★ Crimps barbed and beaded fittings. Dies snap quickly into place requiring no pins or screws.
- ★ Can be easily mounted to a bench using the holding fixture or held securely in a vice.
- ★ It has beautiful appearance, light structure, simple operation, large output force and high work efficiency.
- ★ The tool set is lightweight design and powerful crimping output force. It is one of the best tools for your automotive air conditioning repair crimping.
Rank No. #16
Interstate Pneumatics H10-8 Manual Benchtop Crimper for 1/2 Inch to 3/4 Inch Rubber & PVC Hose
- Ideal for small production
- Economical compact design | Solid steel construction
- Six-piece die design for a perfect crimp
- Base plate holes to bolt down for bench use
- 1/2" die & two-piece handle included
Rank No. #17
Hydraulic AC Hose Crimper 71500 Manual A/C Hose Crimper Kit Air Conditioning Repair Handheld Hydraulic Hose Crimping Tool
- The Hose Crimper Kit comes with a complete set of dies covering hose sizes: #6(5/16"), #8(13/32)", #10(1/2"), #12(5/8") and reduced barrier hose sizes: #6(5/16"), #8(13/32)", #10(1/2"), #12(5/8") . Note: #8SRB and #6 is the same dies, with purple color.
- This hydraulic crimping tool is made of aluminum alloy material, ensuring the durability. Stamper hardness can reach up to 53 HRC, making the crimping effect better, and the hand‑held detachable hydraulic design makes the manual air conditioning hose compressor easier to use.
- This ac hose crimper tool can be easily mounted to a bench using the holding fixture or held securely in a vice. The dies for hydraulic hose crimper snap quickly into the press fixture requiring no pins or screws.
- Hose Crimper Kit comes with a whole set of accessories and one storage box, which makes it easier for you using. Easy to store, easy to organize, avoid missing.
- 7*24 hours online service. If you encounter any questions during the shopping process, you are welcome to contact us at any time.
Rank No. #18
Interstate Pneumatics H8-KIT Heavy-Duty Bench Crimper (H8) with Ferrules (50pk) 0.625" ID x 1" & 0.656" ID x 1"
- Made of ductile cast iron and heat-treated steel dies | Extra thick die carriage and a thicker hinge point for extra strength | Dies are compatible with dies available from other brands
- Comes with five dies for crimping | Die Sizes: 0.48", 0.52", 0.58", 0.62", 0.67"
- 1/4" One Braid, 5/16" One Braid, 5/16" Two Braid, 3/8" One Braid & 3/8" Two Braid PVC & Rubber Hoses can be crimped with this crimper | Mounting Holes for permanent benchtop installation
- F7327: Length: 1.0 Inch | I.D: 0.625 Inch | Hole: 0.437 Inch | Wall Thickness: 0.025 Inch | Material: C46500 Brass | 50 per Pack
- F7328: Length: 1.0 Inch | I.D: 0.656 Inch | Hole: 0.437 Inch | Wall Thickness: 0.025 Inch | Material: C46500 Brass | 50 per Pack
Rank No. #19
UTZIKO Industry Hydraulic Cable Lug Crimper 16 US TON 9 AWG to 600MCM Electrical Terminal Cable Wire Tool Kit with 13 Die (9awg~600mcm Crimping Tool)
- 【Durable Material】This hydraulic crimper is made of superior material, high strength and good toughness. Its maximum crimping power is 16 tons. And 13 pairs of dies are made of hardened steel with chrome finish. It also provides increased stabilizes for longer service life.
- 【Wide Application】It is equipped with 13 sets of the crimping dies and its head can be rotated 180° freely for narrow space working, a good choice for battery and welding cables, power wires, electrical cables, etc.
- 【Humanized Design】With this powerful crimper, you can crimp wires and butt connectors easily. It is much easier than using a pair of hand crimpers. It provides more convenient and secure crimping operations.
- 【Easy to Carry】The item comes with a durable yellow plastic box, which makes it portable to carry and compact to store.
- Products are double-checked before leaving the factory. If there is any quality problem, you can contact us.
Rank No. #20
LFGUD 16T Hydraulic Crimping Tool 9 AWG to 600 MCM Battery Cable Crimping Tool 0.87 inch Stroke Hydraulic Lug Crimper Electrical Terminal Crimper with 13 Pairs of Dies
- 【Hydraulic Crimper Spec】- This hydraulic wire crimping tool provides hexagonal confining pressure with 13 pairs of hexagon crimping dies (AWG: 8, 6, 4, 2, 1/0, 2/0, 3/0, 4/0, MCM: 300, 400, 500, 600, 1/8" for stainless steel wire rope.) Crimping range is 8 AWG to 600 MCM, Stroke is 0.87 inch.
- 【Easy to Operate】- Oil return valve relieves pressure and allows the piston to quickly reset. The die set can be easily replaced by one-way fixed latch. The vinyl-dipped grip is very comfortable and easy to use and won't slip.
- 【Sturdy and Durable】- This 16T cable lug crimping tool is made of high quality #45 steel, and the battery cable crimper is sturdy and durable enough to crimp most cables and last a lifetime of use.
- 【Wide Application】- The crimper tool is great for battery, welding cables, power Wires and electrical cables, etc. Even can be rotated 180° freely for narrow space working.
- 【Warranty】Please contact us if you have any problems about our product, we will reply you as soon as possible within 12 hours.
Last update on 2023-08-03 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best hydraulic hose crimp tool?
Do you get stressed out thinking about shopping for a great hydraulic hose crimp tool? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching hydraulic hose crimp tool, which is why we have assembled a comprehensive list of the greatest hydraulic hose crimp tool available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for hydraulic hose crimp tool that you consider buying. Your questions might include the following:
- Is it worth buying an hydraulic hose crimp tool?
- What benefits are there with buying an hydraulic hose crimp tool?
- What factors deserve consideration when shopping for an effective hydraulic hose crimp tool?
- Why is it crucial to invest in any hydraulic hose crimp tool, much less the best one?
- Which hydraulic hose crimp tool are good in the current market?
- Where can you find information like this about hydraulic hose crimp tool?
We’re convinced that you likely have far more questions than just these regarding hydraulic hose crimp tool, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for hydraulic hose crimp tool, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible hydraulic hose crimp tool. Make sure that you are only using trustworthy and credible websites and sources.
We provide an hydraulic hose crimp tool buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available hydraulic hose crimp tool currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of hydraulic hose crimp tool has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an hydraulic hose crimp tool?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your hydraulic hose crimp tool.
- Customer Ratings: Number ratings grade hydraulic hose crimp tool objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their hydraulic hose crimp tool.
- Product Quality: You don’t always get what you pay for with an hydraulic hose crimp tool, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an hydraulic hose crimp tool is should be an indication of how long it will work out for you.
We always remember that maintaining hydraulic hose crimp tool information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding hydraulic hose crimp tool is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
FAQ:
Q: What can a hydraulic hose crimping machine do?
A: Portable Hydraulic Hose Crimping Machines are ideal for repairing or creating new hydraulic hose lines onsite. Use with compatible fittings and hoses. Bench Mount Hydraulic Hose Crimping Machines are designed for crimping fittings on hydraulic hoses.
Q: What kind of tools are used for hydraulic hose?
A: Professional crimping and swaging tools for hydraulic hose, air conditioning barrier hose, brass ferrules and more. Intended for industrial, construction and automotive applications requiring a single acting ram. Professional cutting tools for hydraulic hose, plastic tubing, and more.
Q: What kind of machine do you use to connect hoses?
A: Use hydraulic hose crimp machines to help connect hoses and hose ends of many sizes. Choose from a wide variety of hose crimping machines that can help you get the job done quickly and easily. Find the hydraulic crimping tool system that can fit your application at Grainger!