Contents

The Best Ingot Mold of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Ingot Mold of 2023. Check our ranking below.

2,539 Reviews Scanned

SaleRank No. #1

100 oz Troy Ounce Gold Bar Loaf Cast Iron Ingot Mold Perfect for Custom Smelting Pouring Melting Casting Refining Gold Silver Copper Aluminum Brass Precious Metals

【Widely Used】Extremely versatile, ideal loaf ingot mold for making gold, silver, copper, aluminum, brass and so on. Great for smelting, casting, pouring, melting and refining various metals.
【Upgrade Design】Designed with humanized handle, allows you better control and operate during casting iron while avoiding the scalding caused by melting casting. In additional, specially designed with slight wall tapered sides for easy and better metal ingot removal.
【Unique Mold】This mold is great, can hold up to 100 troy ounces of gold. This steel mold is not smooth inside the cavity like graphite molds, but you turn the mold over and the bar will drop out, will not stick in mold.
【Superior Material】Made from top quality cast iron for good thermal conductivity, impact & wear resistance, sturdy and durable. Can greatly shorten the melting and shape time, improves the efficiency.
【100% Satisfaction Guarantee】If you're not satisfied with this 100 oz Cast Iron Mold, simply return it for a full refund in 30 days. While you have any questions about our products, please feel free to contact us and we will provide the best service. Always buy confidently in Bonbo!

Rank No. #2

LEE PRECISION Ingot Mold

Made in USA
Casts 1/2 and 1 Pounds. ingots (2 of each)
Perfect for re-melting and alloying
made of rustproof aluminum

Rank No. #3

2 Pieces Graphite Ingot Mould Crucible Mould for Casting Gold Silver Metal Aluminum Copper Brass Melting Refining (4 x 2 x 1 Inch)

Reliable material: main material is graphite, the ash content is less than 0.1 percent, ensuring that the metal purity will not be affected during metal refining; Rapid cold and hot use conditions, with nice thermal stability
Nice characteristics: it has nice thermal conductivity, which can greatly shorten the melting time and save energy, and withstand 2000 degrees Celsius, nice acid and alkali resistance, nice corrosion resistance, impact resistance, 89 MPA compression resistance, and 48.7 MPa flex resistance
Widely applicable: the mould can be applied for experiments and smelting of non-ferrous metals, such as gold, silver, copper, aluminum, and so on; Considering the size of this product, it is more suitable for small-capacity metal melting
Ingot mould size: 1KG graphite ingot mould outer is 100 x 50 x 25 mm/ 4 x 2 x 1 inch, inner is 90 x 40 x 20 mm/ 3.54 x 1.6 x 0.8 inch; 2KG graphite ingot mould outer is 100 x 60 x 40 mm/ 3.93 x 2.36 x 1.57 inch, inner is 85 x 45 x 30 mm/ 3.35 x 1.77 x 1.18 inch, melting and casting metals like gold, silver, brass, aluminum, copper, zinc, plumbum, and more; The capacity is an approximate volume is 1 kg hold or 500g silver
What you receive: there are 2 pieces of graphite ingot moulds in this package include 2 different size, enough quantity for you to use, improving your work efficiency in daily life

Rank No. #4

GongYi 2 Pieces (#2-1kg) Graphite Ingot Molds Crucible for Casting Mould Refining Metal Copper Gold Silver Aluminum Brass (4 x 2 x 1 Inch)

Specification: Includes 2 pieces of ingot moulds in the same sizes. Each piece for 1000g Gold / 535g Silver; Inner 90 x 40 x 20 mm (2.43 fl oz).
Selected Material: Graphite ingot molds are made from high density fine grain graphite, 99.95% Graphite. Ash content less than 0.1%. Better for Refining than Silicon Carbide Graphite Crucibles.
Well-made: The smooth cavity finish of the graphite ingot mold makes the ingot very easy to remove without sticking to the mold itself.
Wide Application: The graphite ingot mold receives liquid metal of precious metals and other types of metals, such as gold, silver, metal, aluminum, copper, brass, zinc and so on, and conserves them until they are solidified.
Extremely Durable: Great alkali resistance and corrosion, super acid and impact resistance.

Rank No. #5

Kilixin Reversible Wire Plate Ingot Mold 2Pc Adjustable Mold for Melting Casting Refining Gold Silver Copper Aluminum Brass Precious Metals

REVERSIBLE: The Ingot Mold is reversible, so it can be used for making round / half round bar / wires and flat sheet. Molds in 2 convertible and detachable parts for easy extraction and cleaning
VARIOUS SHAPES: As for making bars, this Jeweler metal ingot mold allow you to make bars/wires with 8mm, 6mm, 5mm, 4mm in diam. and 60mm in height.Also it can be used to make flat plates in 2mm
CONVENIENT AND PRACTICAL: Includes a "C" clamp, and quite comfortable to hold the ingot mold with wooden handle
MATERIAL: This Jewelry ingot Set-up Mold is made of high-grade Iron and enjoys a long service life. Perfect for making ingot from scrap gold and silver
2 TIPS ON USING: One is to pre-heated the mold very well by torch before casting, and second oil it to making wires more smooth and shiny

SaleRank No. #6

Graphite Mold Eujgoov Strip Shape Graphite Crucible Metal Melting Molds for Casting Gold Silver and Copper(Outside 120×25×17 Inside 100×10×10mm)

FOR METAL SMELTING-- Graphite ingot mold can be used for experiments and smelting of nonferrous metals such as gold, silver, copper, aluminum, etc.
WIDE APPLICATION-- This mold can be used as graphite crucible for smelting non ferrous metals, test analysis, as ingot mold, etc.
STANDARD SIZE-- The graphite mold is compact strip shape with standard size, glossy appearance and easy molding
HEAT AND SHOCK RESISTANCE-- The ingot mold is made of high quality graphite material with high purity and density, heat and shock resistance
HIHG TEMPERTURE RESISTANCE-- Melting casting mold features good high temperature resistance and wear resistance, reducing preheating process, easy demoulding

SaleRank No. #7

100 oz Troy Ounce Gold Bar Loaf Cast Steel Ingot Mold for Melting Refining Casting Gold Silver Copper Iron Aluminum Brass and Other Metals

Function: This Cast Ingot Mold holds up to 100 troy ounces of gold, and great for making Gold, Silver, Copper & Aluminum Bars and the other metal bars.
Nice Features: Designed with a slight taper for easy ingot removal. Durable handle, more direct and easy to use.
Size: Overall dimensions 10.04" Long x 3.20" Wide x 1.94" Deep. And the handle is 3.47'' long.
Material: Made of high-grade steel, quenched and hardened, anti-corrosion, strong and durable.
Satisfaction Guarantee: 100% satisfaction guarantee. Please feel free to contact us if you have any questions about our product.

Rank No. #8

6" Wire Combination Strip Ring Ingot for Melting Casting Refining Gold Silver Copper Aluminum Brass and Precious Metals

6" Strip Wire Ingot Mold
3 Sizes
Easy To Use
Designed to Cast Flat Strips and Wires
Works with Gold, Silver, Copper, Aluminum and More!

Rank No. #9

OTOOLWORLD Gold Silver Graphite Ingot Mold Mould Crucible for Melting Casting Refining (1kg)

High quality graphite ingot mold
you can select the size you need, and the size you can find on the listing photo
for gold and silver melting after the formation of gold and silver pieces
can also be used as graphite crucible melting into non-ferrous metals, test analysis, as the ingot mold and other purposes
the capacity is an approximate number= inside Length*Width*Height*0.9

Rank No. #10

Ingot Mold Silver Ingot Mould Gold Casting Ingot Crucible Mold for Melting Casting Refining Gold Silver Metal Aluminum Copper Brass

8" Ingot Mold Mould is equipped with a wooden handle, which is safer to use.
8" iron Ingot Mold Mould, more durable than graphite crucible.
There are three iron blocks, you can easily adjust the capacity of Ingot Mold Mould.
You can apply release agent or some oil before use, so that it can be released easily.
If our products have any problem, pease sontact us,we promise to help you within 24hrs.

Rank No. #11

GanFindX 1 PCS (#2-1KG-56ML) Pure Graphite Ingot Molds for Melting Casting Refining Gold Silver Metal Aluminum Copper Brass with Packing Box

Specification: #2 Inner 1.3 x 0.87 x 3.03 inch, The capacity is an approximate volume is 1 kg gold or 0.59 kg silver.
High Purity Graphite: Graphite purity is 99.95%, good thermal stability and heat dissipation make it more than ordinary. The refining effect of silicon carbide graphite crucible is better, good thermal stability and heat dissipation make it more than ordinary. The refined effect of silicon carbide graphite crucible is better.
Characteristics: It has good thermal conductivity, corrosion resistance, impact resistance, acid and alkali resistance, and can withstand a temperature of 2000℃/3632℉ without affecting the mold.
Application: The mold can be used for experiments and casting of non-ferrous metals such as gold, silver, copper, etc. Can also be used as an ingot mold.
What's in the box: 1 PCS of graphite ingot mold with Packing Box, Convenient to Carry, Improve smelting efficiency.

Rank No. #12

Lyman Lead Ingot Mould,Multiple

Used to store scrap lead
Needed accessory when emptying furnace
Mould features 4 separate ingots
Sides have 30 degree draft for easy ejection

Rank No. #13

100 oz Cast Iron Loaf Bar Ingot Mold W/Handle Melting Gold Silver Copper Scrap (2)

Ingot molds must be pre-heated before every pour.
ingot size measures approximately 6 1/8" x 2 9/16" x 1 9/16" (155 x 65 x 40 mm)
Overall dimensions measures approximately 10 1/4" x 3 5/16" x 2" (260.35 x 84.2 x 51 mm)

Rank No. #14

5-in-1 Graphite Casting Ingot Mold Coin Combo Metal Casting Refining Scrap Bar for Melting Casting Refining Metal Jewelry Gold Silver Brass Zinc Aluminum (1 Piece)

Outside dimensions: 72 x 57 x 12 mm, the mold has 3 rectangular slots and 2 round holes, suitable for melting and casting bars or coin metals, gold, silver, copper and other alloy tool steel, please check the size before purchasing
Different usages: graphite casting ingot mold can be applied for experiments and smelting of non-ferrous metals, including gold, silver, copper, aluminum, and so on, which can also be applied as graphite crucible melting into non-ferrous metals, test analysis, as the ingot mold and other purposes; Considering the size of this product, it is more suitable for small-capacity metal melting
Works well: nice thermal stability for withstanding 2000 degrees Celsius, fast cooling, nice corrosion resistance to strong acid and alkali, nice thermal conductivity properties which highly shorten the casting time and save energy; It keeps its natural graphite of various physical and chemical properties; This mold is ideal for making several bars at the same
Reliable material: mainly made of graphite, these molds are with hardness 51 HSD, 89 MPA compression resistance, 48.7 MPa flex resistance, bulk density 1.86 g per cubic cm, ensuring that the metal purity will not be affected during metal refining; Nice thermal conductivity and corrosion, well heat transfer
Nice temperature resistance: graphite crucible let the products more durable than ordinary material products, which can withstand more than 2000 degrees Celsius high temperature

Rank No. #15

RCBS Ingot Mould

4-Cavity Ingot Mould without Handle
4-Cavity Ingot Mould without Handle
4-Cavity Ingot Mould without Handle
4-Cavity Ingot Mould without Handle
4-Cavity Ingot Mould without Handle

Rank No. #16

OTOOLWORLD Gold Silver Graphite Ingot Mold Mould Crucible for Melting Casting Refining with Metal Bar (500g)

High quality graphite ingot mold with Metal Bar
capacity:28ml, 500g(16oz)gold, 250g(8.5oz)silver
for gold and silver melting after the formation of gold and silver pieces
can also be used as graphite crucible melting into non-ferrous metals, test analysis, as the ingot mold and other purposes
the capacity is an approximate number= inside Length*Width*Height*0.9

SaleRank No. #17

4 Pieces Graphite Ingot Mold Stir Rod Stick Set, 5-in-1 Graphite Casting Coin Combo Metal Refining Scrap Mold, 1 KG Graphite Ingot Crucible Mould, 2 Graphite Stir Rod Stick for Melting

"What you get: this package includes 1 piece of 5-in-1 graphite casting ingot mold, 1 piece of 1 kg graphite ingot crucible mould, and 2 pieces of graphite stir rod sticks, totally 4 pieces in 1 package, convenient combination set to meet your DIY needs for melting casting refining metal jewelry gold silver"
"Size information: the 5-in-1 metal refining scrap mold measures about 72 x 57 x 12 mm, and the 1 kg crucible mould is 100 x 50 x 25 mm in outer diameter, and 90 x 40 x 20 mm in inner diameter; Each crucible stir rod is about 12 inches/ 30 cm long, and 5/16 inch/ 0.8 cm in diameter, please check these sizes carefully before purchasing"
"Wide range of applications: these graphite ingot molds are suitable for experiments and smelting of non-ferrous metals, including gold, silver, copper, aluminum, and so on, which are designed for lab, test analysis and other purposes; Considering the product size, it is more suitable for small-capacity metal melting projects"
"Product advantages: these graphite casting molds are featured with nice thermal stability and corrosion resistance to strong acid and alkali, fast cooling, nice thermal conductivity properties can highly shorten the casting time and save energy"
"Nice material: these melting casting molds are mainly made of graphite, the ash content of the 1 kg crucible mould is less than 0.1 percent, which can ensure that the metal purity will not be affected during refining; The 5-in-1 casting mold is with hardness 51 HSD, 89 MPA compression resistance, 48.7 MPa flex resistance, bulk density 1.86 g per cubic cm, making sure that the metal purity will not be affected during refining; Graphite stir rod sticks is 1.75 in density, and 0.2 in granularity"

Rank No. #18

OTOOLWORLD Graphite Casting Ingot Mold Metal Refining Scrap Bar Coin Combo 1/4 1/2 1 oz (1)

It is a graphite ingot mold for refining scrap melting furnace.
Fits for the casting of most metal, such as gold ,silver and copper.
High purity.
Outside size: 77*57*11.5mm
In Stock Ships within 1 business day!

SaleRank No. #19

4 Pieces Graphite Ingot Mould Crucible Ingot Casting Mould Silver 1 KG Gold Ingot Mould for Gold Silver Metal Aluminum Copper Brass Melting Casting Refining (90 x 40 x 20 mm)

"Package comes with: you will receive 4 pieces of graphite ingot moulds in the package, the sufficient quantities for you can meet your DIY requirements in daily life"
"Quality material: our casting ingot crucible moulds are mainly made of graphite material, almost no ash content to ensure that the metal refining process does not affect the purity of the metal, which are durable, sturdy, reliable and reusable, not easy to break or deform, you can use them for a long time"
"Size detail: the outside dimension of our silver gold ingot mould is approx. 100 x 50 x 25 mm/ 3.94 x 1.97 x 0.98 inch and the inner size is approx. 90 x 40 x 20 mm/ 3.54 x 1.57 x 0.79 inch, and the capacity is about 1 kg gold or 500 g silver, proper size can meet your daily needs"
"Good performance: our ingot crucible mould has good thermal conductivity, which can greatly shorten the melting time and save energy, and can withstand a temperature of 2000 degrees Celsius, good acid and impact resistance, good alkali resistance and corrosion resistance, 89 MPA compressive strength and 48.7 MPa flex resistance"
"Various applications: this graphite casting mould has a wide range of applications, it is suitable for experiments and melting of non-ferrous metals, such as gold, silver, metal, aluminum, copper, brass, zinc and so on, and it also can be applied for experimental analysis after graphite crucibles are melted into non-ferrous metals, as the ingot mould and other purposes"

SaleRank No. #20

100 oz Cast Steel Ingot Mold for Melting Casting Refining Gold Silver Copper Aluminum Brass Precious Metals etc

【Fit on】 Fits Approximately 100 oz of metal,ideal for casting gold, silver, copper, aluminum, and more.Suitable for laboratory, school science education.
【Function】Melting casting refining gold silver copper aluminum brass precious metals.
【Material】Made of high-quality steel,it has well thermal stability, corrosion resistance and impact resistance, strong acid and alkali resistance, good thermal conductivity.
【Note】The 100 ounce Cast Iron ingot mold has a slight wall taper for better metal removal. This Mold is great for making Loaf type bars. The weight of each bar depends on what metal your working with and how full you fill the cavity.
【Satisfaction Guarantee】 We provide professional and sincere services to escort your shopping. If you are not 100% satisfied with our products, you only need to return them within 30 days to get a full refund. We also support a 12-month warranty.

Last update on 2023-08-09 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Ingot Mold?

Do you get stressed out thinking about shopping for a great Ingot Mold? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Ingot Mold, which is why we have assembled a comprehensive list of the greatest Ingot Mold available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Ingot Mold that you consider buying. Your questions might include the following:

Is it worth buying an Ingot Mold?
What benefits are there with buying an Ingot Mold?
What factors deserve consideration when shopping for an effective Ingot Mold?
Why is it crucial to invest in any Ingot Mold, much less the best one?
Which Ingot Mold are good in the current market?
Where can you find information like this about Ingot Mold?

We’re convinced that you likely have far more questions than just these regarding Ingot Mold, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Ingot Mold, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Ingot Mold. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Ingot Mold buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Ingot Mold currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Ingot Mold has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Ingot Mold?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Ingot Mold.
Customer Ratings: Number ratings grade Ingot Mold objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Ingot Mold.
Product Quality: You don’t always get what you pay for with an Ingot Mold, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Ingot Mold is should be an indication of how long it will work out for you.

We always remember that maintaining Ingot Mold information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Ingot Mold is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: Should ingot molds be preheated?

A: Each section of the ingot mold should be 2 to 2 ½ times the thickness of the ingot to provide enough mass to act as a heat sink, pulling the heat out of the molten platinum. If the molds are too thin, distortion, burning or melting of the mold can occur. Molds should be preheated to 250 degrees F and placed on a sturdy metal table.

Q: How do you make graphite mold?

A: Process: Graphite mold casting process is a simple process where a plastic aggregate consisting of graphite grains, pitch, carbonaceous cement, starch and water are use for making the mold. The mixture is squeezed around pattern and allowed to set. When the mold dried, it is fired to dry to form a strong mold.

Q: What is a metal casting?

A: Metal casting is a metalworking technique in which molten metal is poured into a mold and allowed to set before being removed to reveal a metal piece which can be finished with grinding, sanding, and polishing before being sold. This is one of the oldest metalworking techniques in the world,…