The Best Injector Tool of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Injector Tool of 2023. Check our ranking below.

2,349 Reviews Scanned

Rank No. #1

DPTOOL 12pt 1/2" Dr L-Type Diesel Injector Line Socket Wrench Set 12 14 16 17 18 19mm (6PCS)

Practical Function: Special designed to loosen and tighten nuts and bolts in confined spaces such as fuel injector connections.
1/2" drive so will for any 1/2" drive ratchets / bars / extension
Diesel injector fuel line socket wrenches
Suitable for dismantling injector lines on most diesel engines
12mm / 14mm / 16mm / 17mm / 18mm and 19mm

Rank No. #2

Fuel Injector Puller Remover and Injector Seal Install Tool Compatible with Land Rover Jaguar 3.0L 5.0L Gasoline Engines Replace 310-197 310-198 310-199

Application: This fuel injector remover tool compatible with Land Rover/Jaguar 3.0 5.0 petrol engine, fit Jaguar X150, XK Series, X250(XF) and XJ models (V8 5.0lt petrol engines).compatible with Land Rover Discovery 4, new Range Rover, Range Rover Sport (V8 5.0lt petrol engines)
Remove Fuel Injector More Easy: Usually, injectors on vehicles are very tough to pull in general , but this tool use slide harmmer will more easy to pull fuel injector, the curved design can be used in tight spaces
Install Fuel Injecor Seal: Fuel injector seal installer is specially designed to install the new injector teflon seal without deformation and damages. Saving time and improving efficiency
OEM Equivalent Part Number: 310-19; 310-198; 310-199
Tips: Before use, please tighten the nut at the end of the slider to prevent it from slipping off during use.Hold slight downward pressure on the locking clasp as u use the slide hammer to pop the injector free,that will get better results

Rank No. #3

YOOWEE Compatible with Volvo Mack Truck Injector Nozzle/Cup/Sleeve/Tube Remover & Installer Tool Kit Work on D11 D12 D13 D16 FM12 MP7 MP8 MP10 Engine Replaces 9986174 88800387 88800196

Application -- Compatible with Volvo engine 2007-2016 (D16: VHD, VNL, VNM, VNX, VT; D13: VNM, VNL, VHD; D11: VHD, VNL, VNM); For Mack Engine 2008-2020 Conical Injector Sleeve(MP7-MP8: MRU, LEU, CXU, CHU, GU, CV, CTP, CT)
Nice Function -- This tool kit is used for the removal and installation of brass cups(21098621, 3183368, 85104134, 85124276) on mack truck engines. Replaces OEM number: 9986174, 88800387, 9998254
High Quality -- Machined from heavy duty carbon steel, this injector remover kit with a fine textured black powdercoat finish ensures a lengthy lifespan for cups removal and installation
Easy Use-- An expanded collet design allows the sleeve to be gripped from above and attached to the puller force screw, so the injector sleeve of the copper unit can be extracted from the top of the cylinder head
100% Satisfaction Guarantee — If you're not 100% satisfied with our sleeve installer tool kit, just return it for a full refund in 30 days. YOOWEE’ s Professional Service allows you to take no risks on your purchase!

Rank No. #4

PLAYOCCAR N20 N55 Fuel Injector Removal Installation Tool Kit Compatible with BMW, Automotive Injectors Puller Engine Timing Tools Set

【COMPATIBILITY】Fuel injector removal tool kit compatible for BMW N20 N55 engines.
【PERFECT TOOL】Specially designed to install and remove the fuel injector.
【HIGH-QUALITY】Made of premium metal, high hardness, not easy broken, rustproof, long lasting.
【MORE CONVENIENT】Come with carry suitcase for easy storage in trunk or garage.
【AFTER-SALES SERVICE】3 years quality warranty.

Rank No. #5

PIILOO Fuel Injector Removal Tool 3418 Compatible with Ford 6.7L Powerstroke Diesel F-250 F-350 F-450 F-550 2011-2018

Application--Compatible with 2011-2018 6.7L Powerstroke Diesel F-250 F-350 F-450 F-550.
Function--Assists in removing the injector from the cylinder head without damaging the injector and surrounding components.
Material--Made of hardened 4140 steel with black finish, high hardness and durability, wear and corrosion resistance. Provides a cost-effective alternative to the OEM part.
Suggestion--To reduce the possibility damage and facilitate disassembly, please soaks the injector in penetrating oil one day before removal.
Package Include--1X Fuel Injector Removal Tool

Rank No. #6

GM245 Fuel Injector Seals Tools Set Perfectly Compatible with GM Subaru Engines, Replaces for #EN-49245, EN-51105 and #18683AA000

【Wide Applications】Fits for General Motors 2.0L 3.6L engines with Hitachi fuel injectors [2010-2017]; Fits for GM 2.0L 2.5L 5.3L 6.2L engines with Bosch, Continental Delphi fuel injectors [2012-2017]; Fits for Holden Colorado 7 [2016]; Fits for Subaru 2.0L 2.4L turbo engines [2014-2019].
【High Performance】Used for replacing the fuel injector teflon o-ring seals. Specially designed to properly size the seal and easily install the seal on the fuel injector for leak-free operation. Comes with 2 seal installation pilots for each groove, a seal installer driver and a compression sizer.
【Direct Replacement】Comparable to #EN-49245, #EN-51105, #18683AA000 and #18683A both in quality and functions. Our GM245 fuel injector seals tools meet or exceed the OEM specifications, perfect fit and makes your job easier, saving your time, energy and money.
【Package Includes】1 x EN-49245-1 Long Seal Installer Guide; 1 x EN-49245-2 Short Seal Installer Guide; 1 x EN-49245-3 Seal Installer Pusher; 1x EN-49245-4 Seal Sizer Tool; 1 x EN-51105-1 Seal Installer Adapter Alt; 1 x EN-51105-2 Seal Installer Adapter Alt.
【100% Satisfaction Guarantee】If you're not satisfied with our EN-49245 Injector Seal Installer and Sizer Tools Set, simply return it for a full refund in 30 days. While you have any questions about our products, please feel free to contact us and we will provide the best service. Always buy confidently in Bonbo!

SaleRank No. #7

AC Oil Injector for R1234YF, R134A, R410A, HVAC Dye Oil Injector with 1/4" SAE Connector, 2 OZ Refrigerant Hand Turn AC Oil Injector Tool, for R1234YF R134A R410A Refrigerant System

Large Capacity : Our HVAC Dye Oil Injector is 2 oz Push-in type. 1/4 oz/7.5ml---2oz/60ml. besides, ac oil and dye injector built-in 1/4" SAE connector which has backflow prevent function. Markings etched will help you read easily. Knurled handle designed make the ac oil dye injector rotated easily.
Wide Application : Our ac oil injector tool can be used for r134a, r1234yf and r410 system. It can compatible with all types of refrigerants. The HVAC oil injector tool is very suitable for office air conditioning, home air conditioning, and car air conditioning systems.
Easy to Use : Firstly, check valve screwed onto cartridge and tightened. The inner and outer cylinders are tightened clockwise, and then a little 1/4 SAE threaded inner core is used to discharge a little air inside the blue tube. Novice can do it independently.
Premium Material : Our oil dye injector body is made of premium aluminum alloy, 1/4" SAE connector and r134a r1234yf r410 adapters are made of solid brass. The thickening hose is made of durable rubber material. It can be used for longtime for safe and smoothly connection.
AC Oil Injector Kit : Our ac oil injector tool kit includes : 1pcs ac oil dye injector, 1pcs r1234yf low side pressure adapter, 1pcs r134a low side pressure adapter, 1pcs r410 adapter, 1pcs valve core remover, 1pair white gloves.

Rank No. #8

DPTOOL Fuel Injector Install & Remove Tool For BMW N20 N55 Automotive Engine Timing Tool Kit Fuel Injector Removal Installation Tool

Application: Fuel injector install tool compatible with BMW N20, and new N55 engine, BM number: 130320, note: this injector not fit old N55 engine
Function: Specially designed to install and remove the injector for N20 N55 engine
Tips: you much evenly install the tool first before installing or removing the injectors.The tool may not come fully tighten, so you much first make sure you tighten everything first before you ue the tool, if you don't know how to use, it's better to search in youtube, because wrong operation maybe will damage your car engine or break your high pressure fuel injectors
OEM Stanrded: Made of high quality steel, high hardness, stable and strong, not easy broken, our quality even exceeds OEM, and help you save much money
Lifetime Warranty: We offer lifetime warranty, we will refund or replace, if the fuel injector install tool have any quality problem

Rank No. #9

Yuesstloo Fuel Injector Removal Tool, Injector Slid Hammer Puller, Compatible with BMW N14 N18 N20 N26 N53 N54 N55 N63 S63

Yuesstloo Fuel Injector Removal Tool is used to pull injector and remove injector.
The injector puller is compatible with BMW N14 N18 N20 N26 N53 N54 N55 N63 S63 engine.
Easy to operate. Just use the puller connection fuel injector, and pull the slide hammer, you can remove the injector easily, make the job effective.
Made of high-quality material, with high hardness, strong and durable to use.
All items will be checked carefully and packaged in good condition. If there is some problem with our products, you can get help from us.

Rank No. #10

Alltooetools Engine Injector Removal Puller Kit Car Repair Garage Installer Tools Compatible with Audi Skoda

【Material】Manufactured from high quality steel for strength and Durability. Fuel injector puller have Knurled rings for use in Oily and Greasy conditions.
【Applicable】Alltooetools audi injector puller is designed for the removal of FSI type injectors compatible with Volkswagen, compatible with Seat, compatible with Skoda & other European vehicles.
【Suitable】The vw fuel injector tool is compatible with Volkswagen, compatible with Seat, compatible with Skoda & other European vehicles, covering 1.4, 1.6, 1.8, 2.0, 2.7, V6, 3.0, V6, 3.2 V6, 3.6 V6 and 4.2 V8 FSI engines.
【Packing】 Comes within a blow moulded case.

Rank No. #11

ATPEAM A/C Oil and Dye Injector with Snap Quick Coupler 2 OZ Hand Turn Screw-in Air Conditioning Coolant Filling Tube Injection Tool with 1/4'' SAE Connector for R410A R134A R22 R12 Refrigerant System

【Premium Quality】The air conditioning coolant filling tube injection tool is made of aluminum alloy and brass, with 1/4 inch female connector, making it compatible with most AC systems (if not, use CV23p for some 5/16 inch R410a systems).
【Large Capacity】A/C Oil and dye injector refrigerant tools with snap quick coupler, 2 oz push-in type with capacity 1/4 oz/7.5ml---2oz/60ml. The 1/4 SAE port with backflow protection. One shot may cure and save a sickened compressor caused by low oil.
【Easy Installion】Oil cylinder of refrigerant oil injector is filled with 2 ounces of refrigeration oil, check valve screwed onto cartridge and tightened. The inner and outer cylinders are tightened clockwise, and then a little 1/4 SAE threaded inner core is used to discharge a little air inside the blue tube. Connect the low-pressure port of the refrigeration system that needs to be refueled, and add the required amount of cooling oil to the inner and outer cylinders.
【Function】Inject oil/dye on low side with AC on, works great. Makes oil injecting into the R134A R410A R22 R12 system a breeze. Please wear safety goggles to avoid contact with refrigerant.
【Wide Application】A/C oil and dye injector with low side port coupler quick snap, on 13 mm female connector to R134A manifold to work on car AC systems alike. Compatible with fluorescent dyes for leak monitoring, all oil types(POE, or mineral oil) and all home office AC and car AC systems.

Rank No. #12

Fuel Injector Remove Tool Injector Slid Hammer Puller Compatible with BMW N14 N18 N20 N26 N53 N54 N55 N63 S63 Engine

Function: design for pulling injector, use to removal injector
Application: compatible with BMW N14, N18, N20, N26, N53, N54, N55, N63, S63 engine
Easy To Use: Just use puller connection fuel injector, pull the slide hammer, easy to remove injector
Economic: Use this tool is a economic and easy way to remove injector, will improve work effectiveness
12 Months Warranty: This injector remove tool made of high quality steel, and we offer 12 months warranty, we will replace or refund if the tool have any quality issues

Rank No. #13

Fuel Injector Puller Removal Set Injector Seal Installer Service Tool Kit Compatible with Audi VW 1.4 1.6 1.8 2.0 2.7 3.0 3.2 3.6 V6 4.2 V8 FSI TSI Petrol

Applicable Engine: Injector puller tool set fit 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, & 4.2 V8 FSI TSI TFSI engine, compitable with Seat Skoda, not fit diesel engines
Efficient Replace Injector Seals: This Injector puller set easy to pull injectors, help you to reseal and reinstall fuel injectors, saved you a lot of time and frustration; or if you want carbon cleaning on a VW TSI, you need this injector puller
More Tools: Our injector puller tool set include 18pcs tools, complete tool kit to help you replace injector only one time, and the case easy to carry
Professional Injector Puller: This designed specifically for VW TSI engine, precisely machined ensure accurate, perfect adaptat VW engine, made of professional high-strength steel, high hardness and strong toughness, not easy to damage, professional quality makes you more assured
12 Months Warranty: We offer 12 months warranty,we will refund or replace if the tool have any quality problem

Rank No. #14

Yuesstloo Fuel Injector Puller Removal Installer Kit, Compatible with Audi VW 1.4 1.6 1.8 2.0 2.7 3.0 3.2 3.6 V6 4.2 V8 FSI TSI, with Carrying Case & Gloves

Yuesstloo Fuel Injector Removal Kit makes it easy to reseal and reinstall fuel injectors, and used for carbon cleaning on VW TSI, the complete tool kit makes your job efficient and saves your time.
Application: The fuel injector puller tool set is compatible with Audi Seat Skoda VW 1.4, 1.6, 1.8, 2.0, 2.7 V6, 3.0 V6, 3.2 V6, 3.6 V6, 4.2 V8 FSI TSI TFSI petrol engine, not intended for diesel engines.
Made of high-quality material, high hardness and high strength, not easy to break, and high-precision matching.
Comes with a carrying case for easy transport and storage. And we also prepare a pair of gloves for you to wear when you are using this tool.
Our products are professional auto tools. If there is some problem with our products, you can get help from us.

Rank No. #15

Fuel Injector Removal Tool (3418) Fit for 6.7L Ford Powerstroke Diesel 2011-2018 F-250 F-350 F-450 F-550

FITMENT: Injector Puller fit for Ford Powerstroke 6.7L Diesel including 2011-2018 F-250 F-350 F-450 F-550
MATERIAL: Precision CNC machined from high quality heat treated steel to ensure high hardness, wear resistance and corrosion resistance
APPLICATION: Use this tool to avoid causing unnecessary damage to the injector or surrounding parts when removing the Fuel Injector
NOTE: We recommend soaking injector in penetrating oil one day prior to removal, which will reduce likelihood of any damage and aid in the ease of removal
100% SATISFACTION GUARANTEE: We are serious to offer the best products and services to customers. If you're not 100% satisfied with our tool, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty

Rank No. #16

AutoWanderer Tool AC Oil Dye Injector Kit for R134a Refrigerant System with 1/4" SAE Connector and Snap Quick Coupler 2 Oil Checkers 2oz Measuring Cup

【R134A AC Oil Injector Kit】- The oil dye refrigerant injector is supplied with hoses and coupler for R134a system. It will connect safely and smoothly to the air conditioning system.
【Multiple functions】- 1. Addition of oil to the system 2. Re-oiling the system after a change 3. Add Scanner Fluorescence Solution 4. Injection of additives into the system.
【Easy to use】- The oil dye injector makes it easy to top up the AC system. Firstly, connect the injector to the low-side port of the AC system, secondly, pour the required amount of paint or oil into the pump body using the measuring cup, then turn the non-slip knurled handle until the paint or oil is successfully injected into the AC system.
【Capacity：1/4oz/7.5ml - 2oz/60ml】- The pump body has a clearly marked, easy to read oil/dye measuring scale. For a clearer perception of the amount of oil/dye injected into the A/C system, the oil checkers and measuring cup are paired.
【Material】- The oil and dye injector tool has excellent resistance to pressure, rust and corrosion. The body of the AC Oil and Dye Injector is made from a high quality aluminium alloy. The 1/4" SAE fittings are made of brass and the reinforced hose is made of a rubber material. Ideal for use in harsh service environments.

Rank No. #17

OEMTOOLS 37383 VW/Audi Fuel Injector Puller Kit, Puller Set, Injector Puller Tool, Puller Extractor, VW Tools, Injector Removal Tool, VW Injector Tool

EASIER PULLING: The fuel injector remover kit makes fuel injector pulling a painless process on all 2.0L TSI/FSI/TSFI engines; Seal puller kit greatly reduces the amount of time it usually takes for this type of repair
RESEALING: The slide hammer puller set and adapters allows you to reseal and reinstall fuel injectors; Injector puller set includes special attachments to aid with reinstallation
INSTRUCTIONS: Instructions on how to use the tools to pull, reseal, and reinstall are included with the fuel injector master puller set; Cut out the guesswork of a complicated process
INCLUDED IN SET: The fuel injector removal tool set includes an installation tool, mini slide hammer, 2-jaw puller attachment, standard puller attachment, an assembly cone, and 3 calibration sleeves
CASE INCLUDED: The fuel injector puller tool set fits in a sturdy, blow mold case for quick organization; Injector tool kit is perfect for the mechanic on the go

Rank No. #18

LVOUP Fuel Injector Removal Tool Auto Remove Tool Injector Slid Hammer Puller Compatible with BMW N14 N18 N20 N26 N53 N54 N55 N63 S63

【Application】Compatible with BMW N14 N18 N20 N26 N53 N54 N55 N63 S63 engine.
【Function】Design for pulling injector, use to removal injector easily.
【Easy to operate】Just use puller connection fuel injector, pull the slide hammer,easy to remove injector.
【Durable Material】The removal tool is made of high strength materials,it has the advantages of fine rigid structure，sturdy and reliable to use.
【After-sale Service】If you have any questions, please feel free to contact us，We offer timely customer support to all buyers.

Rank No. #19

E-cowlboy J-42083 Automatic Timing Pin+9U-7227 Injector Height Adjustment Gauge Tool+Engine Barring Socket for Caterpillar CAT 3406E C-15 C-16 (3 Tools)

APPLICATION-- Three are used on Catetpillar C-15,C-16. But each can be used on many other models of CAT.(Show On Picture 2)
REPLACEMENT--The Engine Barring Socket is Similar to Factory Tool J-38587-A, and the Automatic Engine Timing Pin is alternative to J-42083, 139-7064 (adapter for C11), 220-2793, 136-4632. ( C-11 and C-13 require adapters 139-7063 or 139-7064 depending on the application.)Alternative to 9U-7227，properly maintain the Caterpillar Injector height.
FUNCTION--Great Tool Set Timing Pin and Adapater- Make timing easier, acquire TDC and begin valve and fuel injection timing procedures; 9U7227 Injector Height Tool-Accurately adjust the Injector Height of the engine; Engine Barring Socket--Turn over engine, makes adjusting injectors and valve lash easierIt was able to pin flywheel
HIGH QUALITY MATERIAL---Constructed with high quality carbon steel, which is the best quality of those markets in sale, with great strength and durability for years of trouble-free use.
100% SATISFACTION GUARANTEE:--If you're not 100% satisfied with our Tool Set, simply return it for a full refund in 30 days, Premium Support & 12 Months Warranty

Rank No. #20

RCM Loader, Switch RCM Loader Payloads Injector Tool Sets, RCM Jig Boot into CFW for Switch, Built-in ReiNX, SX and Hekate (Upgraded Need Not Connect PC)

Last update on 2023-08-06 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Injector Tool?

Do you get stressed out thinking about shopping for a great Injector Tool? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Injector Tool, which is why we have assembled a comprehensive list of the greatest Injector Tool available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Injector Tool that you consider buying. Your questions might include the following:

Is it worth buying an Injector Tool?
What benefits are there with buying an Injector Tool?
What factors deserve consideration when shopping for an effective Injector Tool?
Why is it crucial to invest in any Injector Tool, much less the best one?
Which Injector Tool are good in the current market?
Where can you find information like this about Injector Tool?

We’re convinced that you likely have far more questions than just these regarding Injector Tool, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Injector Tool, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Injector Tool. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Injector Tool buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Injector Tool currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Injector Tool has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Injector Tool?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Injector Tool.
Customer Ratings: Number ratings grade Injector Tool objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Injector Tool.
Product Quality: You don’t always get what you pay for with an Injector Tool, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Injector Tool is should be an indication of how long it will work out for you.

We always remember that maintaining Injector Tool information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Injector Tool is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best Injector Tool of 2023 – Reviewed and Top Rated

How Do You Buy The Best Injector Tool?

Related Post: