Contents

20 Best Inkbird 12V Temperature Controller of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best Inkbird 12V Temperature Controller of 2023. Check our ranking below.

2,014 Reviews Scanned

Rank No. #1

Inkbird Dual Stage DV 12V Digital Temperature Controller Fahrenheit Thermostat Heating and Cooling for Homebrewing Brew Fermenter Fridge Incubator Greenhouse

【Output】2 Relays, control the temperature by setting the temperature set value and the difference value.
【Mode】Automatic switch between cooling and heating modes, Fahrenheit and Celsius display can be choose.
【Calibration】Temperature calibrating, refrigerating control output delay protection.
【Alarm】When temperature exceeds the limit or when sensor error it will alarm. It can be used for peltier water cooling device, cooling fan, car's 12v battery, 12 volt chest cooler,heater etc.
【Warranty】12V temperature controller with 1 years warranty.

Rank No. #2

Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A.

🥇🥇【Convenient Design】 Plug and play, easy to use. Support °C/°F display.
🥇🥇【Dual Relay Output】 Be able to connect with refrigeration and heating equipment at the same time.
🥇🥇【Dual Display Window】 Be able to display measured temperature and set temperature at the same time.
🥇🥇【Buzzer Alarm】 High and low temperature alarms are available when the temperature is over or the sensor is with issue.
🥇🥇【Safety】Maximum output load: 1100W(110V). It comes with temperature calibration and compressor delay which can protect your refrigeration.

Rank No. #3

Inkbird Temp Control Thermostat ITC1000 Dual Stage Digital Temperature Switch Controller ℃ ℉ Display Heating Cooling Relay NTC Sensor 3D Printer Freezer Fridge Hatching 110 Volt

It does indeed read in deg F.
Can control both heating and cooling output
Has an alarm to indicate sensor failure or high temperature
Highly accurate and reliable temperature controller
Be more user friendly than the STC-1000

SaleRank No. #4

Inkbird All-Purpose Digital Temperature Controller Fahrenheit &Centigrade Thermostat w Sensor 2 Relays (ITC-1000).

Fahrenheit and Celsius Display Can Be Choose
Alarm When Temperature Exceeds the Limit or When Sensor Error
2 Relays, Switch Between Cooling and Heating Modes
Control the Temperature by Setting the Temperature Set Value and the Difference Value
Temperature Calibrating, Refrigerating control output delay protection

Rank No. #5

2pcs STC-1000 Digital Temperature Controller DC 12V 10A Digital LED Temperature Controller Thermostat Control Switch 2 Relay Output Cooling Heating and NTC Sensor Probe

【STC-1000 Digital Temperature Controller】Temperature Control Range: -50℃~99℃. Control Accuracy: ±1℃. Control temperature by setting the temperature setting value and the difference value;Temperature calibration. Easy operation, to set start temperature, stop temperature, corrected temperature correction, delay start.
【STC 1000 Digital Thermostat】This STC-1000 digital dual relay thermostat is made of flame retardant shell, a variety of fields perfect use, convenient operation and practical settings.
【Heating and Cooling Function】Two work mode: Heating ( start temperature is less than stop temperature); Cooling ( start temperature is above than stop temperature). Refrigerating contro, output delay protection.
【NTC Waterproof Sensor Probe】Digital temperature controller 12V is equipped with 1M waterproof probe, can be used in moisture and water environment, you can use it in home brewing, fridge, incubation, fermentation, seedling heat mat, accelerating germination.
【Package Contains】2 Pack STC-1000 temperature controller thermostat control switch 2 relay output cooling heating and ntc 10k thermistor sensors temperature probe. (Please kindly note no outlets, wirring needed; Comes with instruction manual).

Rank No. #6

Inkbird ITC-1000F 2 Stage Temperature Controller Cooling and Heating Modes Celsius and Fahrenheit

🔆🔆There are two relays. Switch between cooling and heating modes. Support for °F / °C display.
🔆🔆Overheat Protection of Home Appliances, hatching, Seedling pads, constant temperature Circulation and other Electrical Appliances.
🔆🔆By setting the temperature set-point and the difference between the temperature set-point and the difference.
🔆🔆Alarm when temperature is out of limit or sensor is wrong.
🔆🔆Switch between refrigeration and heating modes, temperature calibration.

Rank No. #7

XH-W3001 Digital LED Temperature Controller Module Digital Thermostat Switch with Waterproof Probe Programmable Heating Cooling Electronic Thermostat Range from -50℃ to 110℃ (12V 10A 120W) (2 Pieces)

2 Working modes: this digital LED temperature controller module has 2 working modes, heating mode (start temperature is lower than stop temperature) and cooling mode (start temperature is higher than stop temperature), range from -50°C to 110°C; The high temperature control accuracy reaches 0.1℃
Stable and reliable: the LED indicator light can display the current output status; The digital display tube can display the measured temperature, and the temperature measurement and control accuracy is high
Durable material: this XH-W3001 digital thermostat switch is made of ABS, one of the five major synthetic resins, which is non-toxic, strong impact resistance, heat and low temperature resistance
Waterproof probe: equipped with a 1-meter NTC10K probe made of stainless steel, which is waterproof and not easy to rust, easy to use and can last for a long time
Suitable for: the temperature controller module can be widely applied in the conditioning systems, incubators, equipment cases, temperature control protection and others

Rank No. #8

Inkbird ITC-608T Temperature Controller with Dual Temperature Sensor AC Dual Stage Outlet Thermostat with 12 Period Time Stage 1800W ETL Listed

❤❤【US ETL Certificate Listed 】ITC-608T thermostat temperature controller is ETL listed, and rigorously tested for quality control and safety. More power up to 1800W.
❤❤【Main Functions】Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off.
❤❤【Dual Temperature Sensor】Temperature sensors are waterproof and the temperature control range is -40~212°F (-40~100°C).
❤❤【Multiple Functions Temperature and Humidity Control Mode with Dual Relay Output】ITC-608T can work as a temperature controller, a humidity controller, a temperature humidity controller and dual temperature controller.
❤❤【Multipurpose Usage】 Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking. Max Loading: 120V 15A 1800W.

SaleRank No. #9

12V Electronic Temperature Controller Programmable -50 to 110 Degree Celsius Heating/Cooling Thermostat Control Switch Module NTC Waterproof Sensor Probe Dual Color LED Display Monitor (2 Pieces)

What will receive: you will get 2 pieces of direct-current 12V 200 mA temperature controllers, the measurement temperature is from -50 to 110℃(-58 to 230℉), the control and backlash precision: 0.1 Celsius, the refresh rate: 0.5 s, the module size: 48 x 29 x 32 mm/ 1.89 x 1.14 x 1.26 inch, the probe length: 1.5 inches, the cable probe length: 1 ft
Dual color LED display: this digital thermostat control module of dual color LED display, which show the measured temperature (red) and set temperature (blue) at the same time, which can be applied for cooling/ heating mode, you can test indoor or outdoor temperature
Waterproof design: the NTC (10K 0.5%) probe is waterproof, and you can control the temperature at will, can also control heating or cooling according to different needs
Reliable to use: the electronic temperature control switch module has been tested for consistency and reliability, and its control accuracy is 0.1 degrees Celsius, backlash precision is 0.1 degrees Celsius with high temperature protection
Wide application: the electronic thermostat can be widely applied in intelligent home and industrial equipment, suitable for household appliances, automatic irrigation, office machines, audio, automobiles, aquarium, fish tank etc.

Rank No. #10

W3230 Digital LED Temperature Controller Module Digital Thermostat Switch with Waterproof Probe Programmable Heating Cooling Electronic Thermostat Range from -50℃ to 120℃ (12V 10A 120W) (2 Pieces)

The instruction manual is in the last few pictures, if you need detailed electronic documents, please contact us
2 Working modes: this digital LED temperature controller module has 2 working modes, heating mode (start temperature is lower than stop temperature) and cooling mode (start temperature is higher than stop temperature), range from -50°C to 120°C; The high temperature control accuracy reaches 0.1℃.Stable and reliable: the LED indicator light can display the current output status; The digital display tube can display the measured temperature, and the temperature measurement and control accuracy is high
Waterproof probe: equipped with a 1-meter NTC10K probe made of stainless steel, which is waterproof and not easy to rust, easy to use and can last for a long time
Durable material: this XH-W3230 digital thermostat switch is made of ABS, one of the five major synthetic resins, which is non-toxic, strong impact resistance, heat and low temperature resistance
Suitable for: the temperature controller module can be widely applied in the conditioning systems, incubators, equipment cases, temperature control protection and others

Rank No. #11

KETOTEK KT8230 Digital Temperature Controller Thermostat Regulator 120VAC 30A Fahrenheit -22~572℉ Heating Cooling for Incubator Brooder Refrigerator Fermenter Greenhouse Reptile

【Wide temperature range.】The range for KT8230 is -22~572℉/-30~300℃,This is a relay temperature controller, There is no voltage output directly, you need to connect additional power supply for the load, then it can be set by differential (1~80℃/1~120℉) to turn on/off the load, it is like a switch.
【Output is 30A relay, more accurate.】The temperature controller 120V can be used for big power equipment, like incubator, brooder, refrigerator,Fermenter,Greenhouse,etc. 1°F accuracy to keep the temperature in desired range.
【Support delay start function and temperature correction.】The cooler and heater will delay to work if you set the delay time(PL: 0~7min) not 0, You can set depend on what you need. -30.0°F～30.0°F/ -7℃~7℃ calibrate the temperature when there is error.
【Safe protection.】Temperature Regulator will alarm when it exceed temperature limit or sensor error, alert you when something wrong happened. You can also set the low(LS) and high temperature limit(HS) to change the temperature range, LS < Setting Temperature < HS.
【Simple operation.】 All parameters setting can be saved after restart, you don’t need to set the thermostat regulator when power off, or restart it from vacation. 2m NTC sensor allows more possibility for home

Rank No. #12

DC 12V All Purpose Digital Temperature Controller Thermostat with Sensor Programmable Dual Color LED Display Monitor

TWO TYPES: This delicate digital display temperature controller can set Celsius mode or Fahrenheit mode
CONVENIENT: The display and control temperature can be set to 0.1℃. It is convenient to install and wiring is simple
HIGH TEMPERATURE PROTECTION: Wide temperature measurement range from -50℃ to 110℃ and supports high temperature protection
EASY TO INSTALL: This digital temperature controller can be installed directly or embedded in industrial control equipment panel, convenient and quick
WIDELY USED: Widely used in the hatching area, equipment case, air conditioning system, temperature control protection and other fields

Rank No. #13

Twidec/DC 12V Temperature Controller Programmable -50 to 110 ℃ (-58 to 230 °F) Red/Blue LED Display Monitor Heating/Cooling Thermostat Control Module with NTC 10K Waterproof Sensor Probe

Temperature measuring range:-50 to 110℃ (-58 to 230 ℉); Resolution: 0.1℃ at -9.9 to99.9, and 1℃ at other temperature intervals；refresh rate: 0.5 s
Opening size: 45mm*25mm/1.76"*1 ";Dual color LED display:Temperature controller monitoring instrument, show the measured temperature (red) and set temperature (blue) at the same time.which can be applied for cooling/ heating mode, you can test indoor or outdoor temperature
NTC 10K Which is waterproof, moisture-proof and anti-rust. Available for remote temperate measuring and controlling. It can control heating or cooling according to different needs
The electronic temperature control switch module has been tested for consistency and reliability, and its control accuracy is ±0.1 degrees Celsius with 0-110℃ high temperature protection
The thermostat can be widely applied in intelligent home and industrial equipment, fish tank water temperature control, incubation field, equipment cabinet, air conditioning system, temperature control protection, control cabinet cooling system and other DIY temperature control systems.

Rank No. #14

XINGYHENG STC-1000 DC 12V 10A Microcomputer Digital Display Temperature Controller Thermostat Control Switch 2 Relay Output and NTC 10K Thermistor Sensors Digital Temperature Probe (12V)

Super material: STC-1000 intelligent thermostat is an independent product, ABS flame retardant shell, a variety of fields perfect use, convenient operation and practical Settings, is your side temperature control housekeeper.
Package including: 1 Pack of STC-1000 intelligent thermosta module, which is equipped with 1pcs NTC 10K temperature probe. The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling.
STC-1000 Digital Thermostat specification: Temperature control range: -50-99°C. Control accuracy of 0.1 degrees Celsius. Control temperature by setting the temperature setting value and the difference value;Temperature calibration. Easy operation, to set start temperature, stop temperature, corrected temperature correction, delay start.
High Power High Efficiency: Two Work Mode: Heating ( start temperature is less than stop temperature), Cooling ( start temperature is above than stop temperature) It is precise and reliable with good long-term stability. Refrigerating contro,l output delay protection.Alarm when temperature exceeds temperature limit or when sensor error.
A wide range of applications: temperature controller is equipped with over 40’’ inch waterproof probe can be used in moisture and water environment,you can use it in home brewing, fridge,pet breeding,reptile tank. Widely used in hvac, dehumidifier, test and test equipment, automobile, automatic control, weather station, humidity regulator and other related temperature detection and control.

Rank No. #15

KETOTEK Digital Temperature Controller AC110V 10A Fahrenheit Thermostat with 2m Waterproof Sensor 2 Relays Heating Cooling Incubator

【2m Waterproof probe】Digital temperature controller 110V can be used in moisture and water environment, you can use it in home brewing, fridge, pet breeding, reptile, tank, incubation, fermentation, seedling heat mat, accelerating germination, ect.
【Keep temperaure in desired range】It's on/off control mode. You can program by simply setting temperature set value and difference value, heating and cooling mode can be automatically switched. Fully utilize the stc microcontroller and NTC probe to have this temperature regulator has great accuracy.
【High accuracy】Made of ABS heavy-duty and anti-flamming plastic shell with embedded structure, this digital dual relay thermostat is safe and energy saving. Accuracy: ±1°F, Temperature control range: -58~212°F, Power consumption: ≤3W, Power Supply: 110VAC 50Hz/60Hz. Output: 2 Relays, Cooling (10A/110-220VAC) / Heating (10A/110-220VAC).
【Connect heater & cooler at the same time】No more frequently change wiring between heater and cooler. This temperature regulator has 2 relays. Compared with other 1 relay temperature controllers, you can wire 2 appliances (heater and cooler) at the same time. (Please kindly note no outlets, wiring needed).
【Multi-functional】This incubator thermostat ac110V supports temperature calibration, compressor delay protection, alarm when temperature exceeds temperature limit or when sensor error, all parameters setting can be saved after restart.

Rank No. #16

Inkbird Digital Outlet Heat Temperature Controller with Day Night Control for Brewing Breeding Reptiles Hatching Heat Mat ITC-306T 10A 100V.

🌟🌟[Convenient Design] Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
🌟🌟[Dual Display Window] Be able to display measured temperature and set temperature at the same time.
🌟🌟[Only Heating] Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
🌟🌟[Dual Time Cycle Setting] Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
🌟🌟[Different Functions] Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).

Rank No. #17

Inkbird ITC-308 Digital Temperature Controller Outlet Thermostat 2-Stage 1100W with Sensor Reptile Beer Brewing Kegs Fridge Cured Meat Breeding Growing

[Convenient Design] Plug and play design, easy to use.
[Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
[Dual Display Window] Be able to display measured temperature and set temperature at the same time.
[Dual Reading Mode] Support reading with Centigrade or Fahrenheit unit.
[Parameter] .Maximum output load: 1100W(110V).

Rank No. #18

Inkbird WiFi ITC-308 Digital Temperature Controller Aquarium Thermostat for Aquarium Heater and Cooler, with Waterproof Sensor

💦💦【Heating and Cooling】Controls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device.
💦💦【Applicable Scene】Because it has the powerful function of corrosion protection, it is very suitable for fresh water, sea water aquarium, coral cylinder, ornamental shrimp and tropical fish.
💦💦【Dual Display Window】Easy to set up,be able to display measured temperature and set temperature at the same time.Provides a temperature display of Celsius or Fahrenheit.
💦💦【Alarm for Safe】High and low temperature alarms,sensor failure alarm. Maximum output load: 1200W(110V).
💦💦【WIFI & APP】WIFI smart controller supports both IOS & Android，WIFI supports 2.4GHz Wi-Fi router, free APP “InkbirdSmart” which is able to control temperature at any time.

Rank No. #19

AITRIP 3PCS W1209 12V DC Digital Temperature Controller Board with 10A One-channel Relay and Waterproof Micro Digital Thermostat -50-110°C Electronic Temperature Temp Control Module Switch (With Case)

The W1209 thermostat module has a STM8S controller, a sensor input, keys, LED display, and a relay. It can be reprogrammed for control, timing, or counting.
Temperature Measurement Range: -50~110℃. Control Precision: 0.1 celsius.
Electronic digital thermostat with a 3-digit LED display, extremely bright. Operation both in heating and cooling to easily control equipment and devices.
The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling
The output is electronically controlled by a microprocessor, to guarantee the utmost precision of intervention and an excellent resolution of reading temperature

Rank No. #20

Inkbird Dual Stage Temperature Controller Heating and Cooling with AC 100 to 240V ITC-308S and NTC Probe for Grow Room Fermentation Fridge Brewing

🌟🌟【Convenient Design】Support °F/ °C display. Easy to set, PV and SV dual display windows.
🌟🌟【Dual Relay Output】You can use the cooling device or heating device separately, or you can plug the cooler and the heater at the same time.
🌟🌟【Dual Display Window】Be able to display measured temperature and set temperature at the same time.
🌟🌟【Waterproof Sensor】The temperature controller sensor is stainless and waterproof IP68.
🌟🌟【Alarm for Safe】Alarm when over-temperature and sensor error. Maximum output load: 1100W(110V).

Last update on 2023-08-19 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Inkbird 12V Temperature Controller?

Do you get stressed out thinking about shopping for a great Inkbird 12V Temperature Controller? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Inkbird 12V Temperature Controller, which is why we have assembled a comprehensive list of the greatest Inkbird 12V Temperature Controller available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Inkbird 12V Temperature Controller that you consider buying. Your questions might include the following:

Is it worth buying an Inkbird 12V Temperature Controller?
What benefits are there with buying an Inkbird 12V Temperature Controller?
What factors deserve consideration when shopping for an effective Inkbird 12V Temperature Controller?
Why is it crucial to invest in any Inkbird 12V Temperature Controller, much less the best one?
Which Inkbird 12V Temperature Controller are good in the current market?
Where can you find information like this about Inkbird 12V Temperature Controller?

We’re convinced that you likely have far more questions than just these regarding Inkbird 12V Temperature Controller, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Inkbird 12V Temperature Controller, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Inkbird 12V Temperature Controller. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Inkbird 12V Temperature Controller buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Inkbird 12V Temperature Controller currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Inkbird 12V Temperature Controller has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Inkbird 12V Temperature Controller?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Inkbird 12V Temperature Controller.
Customer Ratings: Number ratings grade Inkbird 12V Temperature Controller objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Inkbird 12V Temperature Controller.
Product Quality: You don’t always get what you pay for with an Inkbird 12V Temperature Controller, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Inkbird 12V Temperature Controller is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Inkbird 12V Temperature Controller information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Inkbird 12V Temperature Controller is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What is a temp controller?

A: A Temperature Controller is a device that is used to control a heater or other equipment by comparing a sensor signal with a set point and performing calculations according to the deviation between those values. Devices that can handle sensor signals other than for temperature, such as humidity, pressure, and flow rate, are called Controllers.

Q: What are industrial temperature controllers?

A: Industrial Temperature Controllers Temperature Controllers receive input signals from devices such as temperature sensors . The controller then uses that data to compare to the desired temperature and provides output to another part of the control system, such as a fan or a heater, to manipulate the temperature.

Q: What is a digital temperature probe?

A: A digital probe thermometer is an inexpensive and accurate tool for keeping track of your food’s internal temperature . Safely and conveniently track the temperature of your meat as it cooks with any of these best digital probe thermometers.