Skip to content

Contents

20 Best Inline Filament Dryer of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best Inline Filament Dryer of 2023. Check our ranking below.

2,026 Reviews Scanned

SaleRank No. #1
【EIBOS Official】3D Printer Filament Dryer Easdry, 3D Printer Filament Dryer Box with Fan, Adjustable Temperature, Humidity Control & Spool Holder, Compatible with 1.75mm 2.85mm 3.00mm Nylon, PLA, ABS
  • 【DRYER & STORAGE BOX】the dryer box is specifically made for the purpose of drying 3D printer filament, intended to remove the moisture from a spool of filament caused by ambient exposing. Filament can be used while in the box, the dryer function as both storage box and filament holder. Also 2 slots at the corners were designed for placing dessicant,keep your filament in longer drying condition.Sealed protection, comprehensive dust-proof and damp, no impurities. US Plug, input voltage 110V-120V
  • 【INFINITE ADJUSTABLE TEMPERATURE & HUMIDITY MONITOR】based on infinite adjustable temperature mode, you can adjust specific heating temperature to accommodate needs of various filaments by simply turning the knob from 40-65℃, with main types of filaments marked for your fast use. Equipped with individual humidity sensor, measurement range from 10%-99% (NOTE: A76/LR44 button battery has ALREADY included), real-time data will be indicated by the LCD monitor
  • 【COMPATIBLE WITH MULTIPLE SPOOLS】works for different filament types and diameters, compatible with 1.75mm, 2.85mm, 3.00mm 3D filament such as Nylon, PLA, PVA, PC, TPU, PETG, PA, Wood, ABS, Silk, etc. Exquisite space allows usage of single roll with spool size:220x72mm Inner size:50mm, with smooth rotating shaft that allows the filament to continuously rotate in a dry hot box to remove moisture
  • 【HOT-AIR CIRCULATION HEATING SYSTEM】applying hot air circulation heating which makes the temperesuture inside box more even, filament dryer box aims at drying the wet or brittle 3D printer filament, or even make it better than the brand new unit. No plastic strings and clogging, no need worry about your old left out spools, this dryer box can help revive them easily
  • 【45W PTC HEATER & BUILT-IN FAN】different from applying ordinary heater 48W PI heating pad to heat up space, our product use 45W PTC heater which is more durable, energy-saver, and environmentally friendly, makes filament drying more evenly. Also a Built-in fan is designed to circulate the hot air inside the filament dryer box to make drying system better remove the moisture
Rank No. #2
SainSmart Upgraded Filament Dryer 3D Printer Filament Storage Dry Box Filament Dehydrator Container, with Upgraded Silent Fan, Advanced Heating Mechanism, Up to 24hrs Timer
  • [Fast & Even Heating]: SainSmart Filament Dryer Box is equipped with an enhanced heating mechanism. The Polyimide heater inside the box allows for rapid heat up, the curved metal plate enables effective heat transfer and the air circulation fan at the bottom delivers evenly heated filaments.
  • [Reduced Noise Level]: The upgraded SainSmart 3D Printer Filament Dryer equips with an upgraded centrifugal fan that is 20% quieter than its predecessor, providing you a better experience.
  • [Up to 24 Hours Timer]:The maximum drying time of this filament dryer is 24 hours, constantly drying your filament for the best printing results.
  • [Straightforward Temperature Setting]: There are 3 default temperature settings for different filament types. I: 40 °C, for PLA and PLA+ Filament; II: 50°C, for ABS, ABS+ and PETG Filament; III: 55°C, for TPU, PVA, PC and Nylon Filament.
  • [Wide Filament Compatibility]: With a maximum filament capacity measuring ⌀200mm × 73mm(H), the SainSmart Filament Dryer is compatible with filaments with different spool weights and sizes. 500g, 1KG; 1.75mm, 2.85mm, 3mm
Rank No. #3
SUNLU 3D Printer Filament Dryer, FilaDryer S2 Storage Dry Box for 3D Printing, 360° Surround Heating, Large-Size Touch Screen, Remove Moisture from Wet Filaments, Spool Holder, Black
  • ①【Rescue Poor Printing】Newest SUNLU FDM 3D Filament Dryer S2 is more efficient to solve stringing, clogging, poor adhesion, poor printing quality and layer shift of 3d printing filament caused by ambient humidity.
  • ②【360°Embracing Heating】The 3D filament dry box S2 has added upper and lower heating plates to achieve all-round surrounding heating and rapid drying, breaking through the heating temperature to 35℃~70℃.
  • ③【Large-size Touch Screen】New 3.42*2.87inch touch screen, tablet-like operation experience. One-key switching between ℃ and ℉. According to various filament, user-friendly one-key recommended temperature setting.
  • ④【Real-time Humidity Detection】Built-in high-precision humidity detection sensor, displaying real-time humidity inside the filament dryer. Assist to judge the drying effect.Automatic sleep standby after drying.
  • ⑤【High Filament Compatibility】Compatible with all the mainstream 3D filament brands and all standard filament diameters 1.75mm/2.85mm/3.00mm; Works perfectly with PLA、PLA+、PETG、TPU、ABS etc,Including high-end filament PA、PC.
SaleRank No. #4
SUNLU Filament Dryer Box with Fan for 3D Printer Filament, Upgraded Filament Dehydrator Storage Box for 3D Filament 1.75 2.85 3.00mm, Keeping Filament Dry During 3D Printing, S1 Plus, White
  • 【Say Goodbye to Poor 3D Printing by Wet Filament】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments.
  • 【Personalized Temperature Setting】The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35℃~55℃. Suitable for more than 20 kinds of 3d printing filament commonly used in the market
  • 【Personalized Drying Time Setting】 The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect.
  • 【Compatible with 99% of 3D Filament Spools】A: Maximum capacity of SUNLU dry box is Φ210*85(H)mm. B: Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc.; C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm.
  • 【User-friendly Design&1 Year Guaranteed After-Sales Service】 A: The design of two rollers inside the box allows you to print while drying; B: 2 inch large screen LCD monitor, can display temperature and time clearly and brightly; C: Ultra quiet design, less than 10db while operating, no disturbing of your life and work; D: Exquisite packaging design- best gift: Come on to buy one to present to your friends who love 3D printing
Rank No. #5
Sovol Filament Dryer 2024, SH01 Filament Dehydrator 3D Printer Spool Holder with Upgraded Fan, Dry Box for Keeping Filament Dry, Compatible with 1.75mm, 2.85mm Filament & PLA PETG TPU ABS
  • 【Remove Excess Moisture】3D printer filaments are hygroscopic, moisture would cause printing failure. Sovol SH01, a great addition to 3d printer, can remove excess moisture, keep your filament dry and bring you better prints. The surface of prints will be smoother, the layer adhesion increased. No more brittle PLA, PETG, ABS filament.
  • 【Real-time Monitoring of Temp and Humidity inside】Displays the humidity and temperature in the dry box in real time. Setting temperature 40 °, 45 °, 50 ° C and setting time from 6 hours to 12 hours. If you use SH01 in a room with room temperature under 16℃, the temperature in the dryer box would not come up to 50℃. But do not worry, this would not decrease drying effect.
  • 【Excellent Power-off Drying Mode】Silicone & PTFE seal makes it possible to store filaments for a long time without power and protects your filaments from moisture and dirt. You can put 4 bags of desiccants (not included in the package) inside the dryer box to improve drying efficience & quality.
  • 【Large Capacity】 Sovol dryer box can store 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm. Please open the PTFE seals on the top of the box during heating for Moisture evaporation.
  • 【Heating More Evenly】 The unique design of the built-in fan in the box is based on the principle of modynamics of air, makes the filament heated more evenly. SH01 makes drying more efficient. Any questions about the product please feel free to contact us. Our technical support team will provide service as soon as we can.
Rank No. #6
[Upgraded with Fan] SUNLU Filament Dryer Box S2 for 3D Printer Filament, Upgrad Filament Storage Dehydrator for PLA PETG ABS Nylon PA Filament 1.75 2.85 3.00mm, with Fan Edition for Quick Drying
  • ✅【Keep Filaments Strong & Flexible】By Using SUNLU Filament Dryer Box S2 to removing moisture from the filament before it's used in the 3D printer, S2 filament dryer helps to ensure that the filament will be dryed. which will result in better print quality and fewer failed prints. This is important in save time, money, and frustration by improving the reliability and consistency of their 3D printing process.
  • ✅【Touch Screen & Easy Operation】3D filament dry box S2 has a new touch screen that is designed to provide a tablet-like operation experience for the user. The screen is 3.42*2.87 inches in size, which makes it easy to navigate and use. The touch screen also allows user to easily switch between ℃ and ℉ and offers one-key recommended temperature settings for different types of filament. This makes it easy for the user to set the appropriate drying temperature for their filament.
  • ✅【Easy to Use & Quality Guaranteed】 Allows you to print while drying. 2 inch large LCD screen monitor,Able to display temperature&time clearly and brightly. Decrease Noise when Printing (less than 10db while operating).
  • ✅【Wide Compatibility Range】compatible with a wide range of filament brands and diameters. It can work with all mainstream 3D filament brands and all standard filament diameters of 1.75mm/2.85mm/3.00mm. This means that it can be used with a variety of filaments, including PLA, PLA+, PETG, TPU, ABS, and even high-end filaments like PA and PC. This makes it a versatile and convenient option for users who want to dry their filament.
  • ✅【Drying & Printing at One Time】The feed-out coil also allows the filament to continue to dry in the dryer as it's being fed to the printer. This means that the filament will be dry and ready to use when it reaches the printer.
Rank No. #7
FIXDRY 3D Printer Filament Dryer with Fan, 110W PTC Heated Fast Reduce Humidity, Temperature Timing Control Dehydrator Dryer Box, 2 Spool Compatible with 1.75mm, 2.85mm, 3.00mm
  • 【Extra Large Homothermic Box】FIXDRY NT1 has a large inside space, Can use 2 rolls of 1kg filaments/1 roll of 3kg filament at the same time, Suitable for multiformat filaments which iinclude1.75mm/2.85mm/3mm
  • 【Excellent drying effect】In the filament dryer, we use a 110W PTC heater to heat up space which is rare and inimitable in the market. As we know, most filament dryers are using a 48W PI heating pad to heat up space that cannot dry evenly. However, the same problem won’t occur in NT1 because of our PTC heater technology. PTC heater is also known as durable, energy-saver, and environmentally friendly
  • 【Adjustable heating temperature】The drying temperature can be set and the operation process is simple. The temperature can be set in a wider range, up to 70°C.(The average temperature is below 70°C)
  • 【Optimized heating method/Real-time temperature monitoring】Hot air heating makes drying more efficient; the unique air duct design makes NT1 conform to the principle of air thermodynamics, and the filament is heated more evenly. Within 2s after setting the temperature, the temperature panel will display the internal temperature in real time
  • 【Real-time humidity monitoring】Independent Electronic humidity detector, digital display. The measuring range is from 10%to 99%. At the time when NT1 is working, the humidity inside the box can drop to as low as 10%.
Rank No. #8
【EIBOS Official Upgrade】3D Printer Filament Dryer Cyclopes, 3D Printer Filament Dry Box with Fan, Adjustable Temp, Humidity Sensor, Compatible with Nylon PLA TPU PETG 1.75mm 2.85mm 3.00mm, Storage Box
  • 【FILAMENT DRYER & STORAGE BOX】the filament dryer Cyclopes is specifically made for the purpose of drying 3D printer filament, aimed at removing the moisture that filament absorb from ambient exposing. Drying while printing, the dryer function as both storage box and filament holder (Note: you need MANUALLY ROTATE the rolls for drying while NOT ACTIVELY printing to avoid the direct hot air from the bottom)
  • 【REAL-TIME HUMIDITY MONITOR & ADJUSTABLE TEMPERATURE】 a dramatic drop in the humidity level clearly indicated by the real-time humidity monitor, (NOTE: the dryer came with a A76/LR44 button battery, just switch the ON/OFF button on the back of hygrometer before using), measurement range from 10%-99%. Heating temperature can be adjusted to meet needs of various filaments, the setting temp will be displayed by the LCD panel. The default time is 6hrs, you can also reset from 0-24hrs up to 70℃ or even infinite heating time regarding your needs
  • 【MULTIPLE EXIT HOLES & COMPATIBLE WITH MULTIPLE SPOOLS】Cyclopes works for a wide range of filament types and diameters, compatible with 1.75mm, 2.85mm, 3.00mm 3D filament such as Nylon, PLA, PETG, TPU, ABS, Silk, Carbon fiber, Wood, etc. Teflon tube included, 10 exits holes are available for you to choose from. Extra large space allows usage 4 rolls of 0.5kg filaments, 2 rolls of 1kg filaments, 1 roll of large filament at the same time, it has two built-in rotating shafts that allow the filament to continuously rotate in a dry hot box to remove moisture (Note: for Single Large Spool-217x174mm, Dual Small Spools: 217x80mm(H*W)
  • 【BUILT-IN FAN & 100W PTC HEATER】 a built-in fan is designed to circulate the hot air inside the filament dryer box to make drying system better remove the moisture, different from applying normal heater 48W PI heating pad to heat up space, our product use 100W PTC heater which is more durable, energy-saver, and environmentally friendly, makes filament drying more evenly
  • 【RESTORE YOUR BRITTLE FILAMENT】keep your old left out brittle filament before having our filament dryer, Cyclopes will help drying and restoring the spools, even make them better than the brand new unit, impeccable prints are the result. No adhesion, cloggings, bubbles, or any plastic strings. Easy to use, no need extra set up
Rank No. #9
Comgrow Filament Dryer, Upgraded Filament Dry Box, Large-Capacity 3D Filament Dehydrator for 2KG Filament, Compatible with 1.75mm, 2.85mm Filament and PLA PETG TPU ABS Material
  • 【Large Capacity】 Compared to other 3d filament dryers, our filament box can store 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm. Note: Only used for the drying of 3D printer Filament.
  • 【Heating & Drying Function】 The damp 3d printer filament leads to tension, clogging, poor adhesion and shifting of layers. This pla dryer box keeps the filament dry and restores the performance of the 3d printer filaments. Please open the PTFE plugs on the top of the box during heating for Moisture evaporation.
  • 【Optimized Heating Method】 The filament dehydrator makes drying more efficient. The unique design of the fan in the box is based on the principle of othermodynamics of air, makes the filament heated more evenly.
  • 【Excellent Sealed Storage Box】 The silicone seal makes it possible to store the filaments for a long time without power and protects your filaments from moisture and dirt. You can put 4 bags of desiccants (not included in the package) inside the dryer box to improve drying efficience & quality.
  • 【User-friendly Design&1 Year Warranty】 2 inch large screen LCD monitor, can display the humidity, temperature in the filament storage box in real time. Setting temperature 40°C, 45°C, 50°C and setting time from 6 hours to 12 hours. If you have any unsolvable problems about COMGROW 3d printer filament dryer, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
Rank No. #10
Filament Dryer Box with Fan, Fixdry 3D Printer Filament Dry Box 70°F Heater Humidity Display Quiet Filament Dehydrator for 1.75 2.85 3.00mm Nylon PA ABS PLA Filament
  • 【DRYING & PRINTING AT SAME TIME】Filament dryer box can drys the wet or brittle 3d printer filament, which can make the filament have no plastic strings and clogging condition, even make filament better than the brand new unit. In addition, it also can be as a printing filament storage box, when unplugged, you can plug the hole and you place 2 desiccants in the lower left and upper right corners of the box to reduce the humidity of the printing filament.
  • 【COMPATIBLE WITH MULTIPLE SPOOLS】Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm. such as Nylon, PLA, PVA, PC, TPU, PETG, PA, Wood, ABS, Silk, etc. Maximum capacity of dry box is 200x70mm(H*W), Inner size: 50mm. with smooth rotating shaft that allows the filament to continuously rotate in a dry hot box to remove moisture.
  • 【NON-POLE TEMPERATURE REGULATION& Built-in Fan】Based on infinite adjustable temperature mode, you can adjust specific heating temperature to accommodate needs of various filaments by simply turning the knob from 45-70℃, with main types of filaments marked for your fast use. Equipped with individual humidity sensor, measurement range from 10%-99% (NOTE: A76/LR44 button battery has ALREADY included), real-time data will be indicated by the LCD monitor.
  • 【40W PTC HEATER】Different from others using ordinary heater PI heating pad to heat the space, Our product uses a 40W PTC heater which is more durable, more energy-saving, more environmentally friendly, and makes the filament dry more evenly. also enhanced built-in fan designed and advanced noise cancellation tech empowers drying system can better remove moisture.
  • 【HOT-AIR CIRCULATION HEATING SYSTEM】Applying hot air circulation heating which makes the temperesuture inside box more even, filament dryer box aims at drying the wet or brittle 3D printer filament, or even make it better than the brand new unit. No plastic strings and clogging, no need worry about your old left out spools, this dryer box can help revive them easily.
Rank No. #12
Creality Filament Dryer Box 2.0 Dehydrator Storage Drier Machine with 24h Timer Adjustable 45-65℃ Filament Spool Holder Keep Materials Dry During 3D Printing for 1.75/2.85/3.0 PLA,PETG,ABS,TPU
  • 【Why Filament Dryer is So Important】Most 3d filaments is hygroscopic. When filaments getting wet, it can causes print failures. such as, bubbles, string,poor bonds,etc.
  • 【3D Filament Dryer and Storage】Creality filament dryer box is an idea solution to remove excess moisture, make your ruined filament live again.
  • 【Easy to Operate】The Creality 3D Printer Filament Dry Box combines a 24-hour timer function, allowing for customizable heating times, with real-time monitoring and a countdown timer to track drying conditions.
  • 【Creality Filament Dryer Box 2.0 Dehydrator】360° hot-air heating is achieved by a quick-heating drying box with a built-in fan that evenly circulates hot air throughout the chamber.
  • 【Strong Compatibility】compatible with most of the 1kg filaments reels on the market, diameter 1.75/2.85/3.0mm and different filaments. The heating temperature range is 45°C-65°C, suitable for multiple filaments such as PLA, ABS, ASA, PETG, TPU, PP, PC, PA, etc.
Rank No. #13
VIT SPORT 1.75mm Filament Connector | Easy Operate Filament Welder Filament Splicer for 3D Printer | Filament Fuser Filament Joiner for PLA/ABS/PC/PETG/TPU Filaments
  • 1. Upgrade Your 3D Printing Experience: Our VIT SPORT 1.75mm Filament Connector, also known as a filament welder or splicer, is designed to seamlessly join filaments. Say goodbye to filament waste during printing!
  • 2. Unparalleled Ease of Use: With our innovative filament splicer tool, connecting and welding filaments has never been easier. Simply follow our detailed instructions and enjoy uninterrupted printing.
  • 3. Superior Filament Welding: Our VIT SPORT 1.75mm Filament Connector ensures reliable and durable filament fusion. Rest assured, your prints will have seamless transitions without compromising strength or quality.
  • 4. Complete Filament Connectivity Kit: Our value-packed set includes the 1.75mm filament splicer tool, guaranteeing precision and stability, enabling flawless filament joining in every print. No need for additional purchases!
  • 5. VIT SPORT's Dedication to Your Success: Our professional team is dedicated to providing exceptional customer support. With a full year of after-sales service, we're here to help you achieve your 3D printing goals.
Rank No. #14
Filament Drying Desiccant (1 Pack) by Slice Engineering | 10X More Powerful Than Silica Gel | Infinitely Rechargeable | Prevent Wet Filament | Fits Perfectly Inside Spools | Made in The USA
  • ✔️ DRY WET FILAMENT - Our activated alumina desiccant is strong enough to wick moisture out of the air and from already wet filament!
  • ✔️10X MORE POWERFUL - Activated alumina desiccants are 10X times stronger than standard silica gel desiccants
  • ✔️DESIGNED FOR FILAMENT - Our Filament Drying Desiccant fits right inside your filament spool and is infinitely rechargeable!
  • ✔️INCLUDES FREE INDICATOR CARD - Each Filament Drying Desiccant comes with a humidity indicator card so you can watch that humidity drop!
  • ✔️USA MADE - All components are manufactured locally and assembled here in our Gainesville, Florida location!
Rank No. #15
Comgrow 3D Printer Filament Dryer Box, Comgrow 3D Filament Storages, Keeping Filaments Dry During 3D Printing, Compatible with 1.75mm/2.85mm PLA PETG ABS Material, Filament Dehydrator, Spool Holder
  • Large Storage Volume -Filament Dry Box Inner Size: 9.29*6.49*9.13 inch. Comgrow dryer box can store 2 rolls of 1kg spools, compatible with PLA PETG ABS SILK filament. Works perfectly with all standard filament diameters 1.75mm/2.85mm.
  • Setting Notes - Set the temperature and duration after turning on the filament dehydrator. The machine will work only when the work state is displayed on the screen. If the work mode is not displayed, the motherboard will automatically shut down after 3 minutes. If you have any unsolvable problems with the COMGROW filament dryer box, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
  • Filament Dryer and Remove Moisture - Comgrow 3d printer filament dryer box is designed to keep filament dry and remove moisture from kinds of filaments. Internal heating during printing provides a dry storage environment for 3D printer filaments and keeps the filament dry. Avoid entanglement, clogging, poor adhesion, and layer migration caused by the dampness of the printing wire. (Note: Only used for the drying of 3D printer Filament)
  • Real-time Monitoring of Temperature and Humidity - Adjustable temperature range 40°~ 50 °C, setting time from 6 hours to 12 hours. A 2-inch LCD screen and touch buttons make it easy to operate, it is more comprehensive and clear of the information display. Press the power button to start, and hold the function button(M) to change the dry time and the temperature setting.
  • Great Sealed Filament Dry Box -The outlet structure adopts a silicone cable sheath and Teflon tube, the outlet is smooth and can be covered with a plug when not in use. The upper cover has a snap button structure, and the sealing performance is good.
Rank No. #16
GRUPO MIRANDINHA Acrylic Jewelry Box Earring Organizer Storage Box Compartment Organizer Box Ring Jewelry Box Organizer (Clear)
  • HIGH-QUALITY MATERIAL - This organizing box is made of sturdy and durable acrylic, not easy to break or crack. With 6 divisions with different sizes, emphasizing the products inside and storing with safety.
  • MULTIPURPOSE BOX - A good choice to organize your collectibles, jewelry, candy, arts, crafts ,makeup, nail supplies, parties and more.
  • APPROPRIATE DIMENSIONS -‎‎ 5.5"D x 4.1"W x 1.4"H or 14 x 10,5 x 3,5 cm
  • VARIOUS OCCASIONS - This beautiful storage acrylic box is a perfect addition for any occasion, bedroom, bathroom, laundry, birthday, wedding, company event or school!
  • IMPRESSIVE GIFT - This organizing box is the perfect gift for everyone on your list. Make their day even better with this present!
Rank No. #17
PrintDry Filament Dryer PRO3 - The Ultimate Filament Dryer for 3D Printing, up to 85c, Built-in Timer, Stackable
  • Dry 3D printing filament before and during 3D printing
  • Six temperature presets: Choose from six temperature presets (35c, 45c, 55c, 65c, 75c, and 85c) to ensure your filament is dried at the ideal temperature.
  • Built-in timer with a maximum time of 48 hours
  • Dries multiple spools at once: Our dryer can fit two standard filament spools, 1.75mm or 3mm filaments, saving time by allowing you to dry multiple spools simultaneously.
  • Active Drying Technology
Rank No. #18
FIXDRY NT2 3D Printer Filament Dryer with Fan, PTC Constant Heating, Touch Screen Temperature Humidity Detection, Upgraded Dehydrator Storage Dry Box for PETG ABS Nylon PLA Filament 1.75 2.85 3.00mm
  • 【PTC Heater Element With Fan】Unlike other PI heater dryers,We innovatively adopted to use a high power PTC heater and a circulating fan to keep it dry during 3D printing. In order to improve the uneven heating of the 3D filament and the heating power is too low. PTC heater is also known as durable, energy-saver, and environmentally friendly.
  • 【Personalized Temperature&Timer Setting】The adjustable temperature(time) range is 20-70℃(0-48hours). Unlike other dryers that can only reach 55 celsius, the new max temperature that your FIXDRY NT2 filament dryer can reach is 70 celsius, making it much more of a viable option for materials like nylon and higher temp filaments. FIXDRY NT2 dryer box can maintain a constant temperature after reach the set temperature that save energy and prevent overheating.
  • 【Memory for Temperature Settings】 We have upgraded the chip,FIXDRY NT2 remember it’s settings, so each time you turn it on, you needn't to program it.
  • 【Touch Screen & Real-time Humidity Temperature Detection】FIXDRY NT2 has a new touch screen , which makes it easy to navigate and use. The touch screen also allows user to easily switch between ℃ and ℉ and offers one-key recommended temperature settings for different types of filament. This makes it easy for the user to set the appropriate drying temperature for their filament.
  • 【Compatible with 99% of 3D Filament Spools】Maximum Capacity: Single Reel< 200x 70 mm(Not suitable for Amazon Basics Filament). Filament Diameter:1.75mm/2.85mm/3.00mm
Rank No. #19
3Dgenius 3D Printer Filament Dryer Filament Dryer Box 3D Filament Dryer for Nylon ABS PETG PLA Filament with Fan for 360° Surrounded Heating, Compatiple with 1.75mm 2.85mm Filament
  • 【REMOVE MOISTURE FROM FILAMENT】Have you encountered stringing, clogging, poor adhesion, and Layer Shift when printing? The 3d printer filament dryer is designed to help you solve the problems of 3d printing filament caused by ambient humidity. The filament dryer box can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments.
  • 【360° SURROUND HEATING】 The 3d printer filament dryer is designed of a built-in fan, so the air in the filament dryer can circulate. The fan makes the filament heat more evenly which can achieve all-round surrounding heating and rapid drying. Tips: Due to the fan design, the sound of the PLA filament dryer will be slightly louder than the one without a fan.
  • 【Humanized Design】Our 3D printer filament dryer is designed with 3 filament outlet holes and insulation cotton. Three different positions of outlet holes can meet your needs for a variety of printing position. And the insulation cotton on both sides of the filament dryer box will prevent you from burns when printing.
  • 【3 HEATING LEVEL & 36 HOURS SETTING】The 3d filament dryer has 3 heating level, which are 45℃±3°/113℉±37.4℉, 55℃±3°/131℉±37.4℉, 70℃±3°/158℉±37.4℉. And the maximum working time of the 3d printer filament dryer is 36 hours, you can choose suitable heating level and time according to your printing needs.
  • 【COMPATIBLE WITH MULTIPLE SPOOLS】The PLA filament dryer works for different filament types and diameters. It is compatible with 1.75mm and 2.85mm diameters filament. As the filament dryer box breaks through the heating temperature to 45℃~70℃, it is suitable for PLA, PLA+, ABS, ABS+, PETG, PVA, TPU, PC, PA and other high temperature resistant filaments.
Rank No. #20
Creality Filament Dry Box, Dust-Proof and Moisture-Proof, Storage Box Keeping Filaments Dry During 3D Printing, Filament Spool Holder Dryer, 3D Printer Accessories
  • Heat and dry: the unused filament can be heated and dried by multifunctional filaments dry box before reuse.
  • Strong compatibility: compatible with most of the 1kg filament reels on the market and different filaments with a variety of wire diameter.
  • Knob operation: the adjustment range of dry time is 2/4/8 hours.
  • Creality provides professional after-sales service. If you have any question or need support about the product, Please contact me via Amazon, we will respond with 24 hours.

Last update on 2023-08-05 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Inline Filament Dryer?

Do you get stressed out thinking about shopping for a great Inline Filament Dryer? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Inline Filament Dryer, which is why we have assembled a comprehensive list of the greatest Inline Filament Dryer available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Inline Filament Dryer that you consider buying. Your questions might include the following:

  • Is it worth buying an Inline Filament Dryer?
  • What benefits are there with buying an Inline Filament Dryer?
  • What factors deserve consideration when shopping for an effective Inline Filament Dryer?
  • Why is it crucial to invest in any Inline Filament Dryer, much less the best one?
  • Which Inline Filament Dryer are good in the current market?
  • Where can you find information like this about Inline Filament Dryer?

We’re convinced that you likely have far more questions than just these regarding Inline Filament Dryer, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Inline Filament Dryer, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Inline Filament Dryer. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Inline Filament Dryer buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Inline Filament Dryer currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Inline Filament Dryer has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Inline Filament Dryer?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Inline Filament Dryer.
  5. Customer Ratings: Number ratings grade Inline Filament Dryer objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Inline Filament Dryer.
  7. Product Quality: You don’t always get what you pay for with an Inline Filament Dryer, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Inline Filament Dryer is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Inline Filament Dryer information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Inline Filament Dryer is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What is the best dryer for 3D printing filament?

A: 4 Best Filament Dryers For 3D Printing – Improve Your Print Quality. 1 1. SUNLU Filament Dryer. Beginning this list is the SUNLU Dry Box for 3D printer filament storage. This spool holder is compatible with filaments of 1. 2 2. PolyMaker PolyBox. 3 3. eSUN Aibecy eBOX. 4 4. Chefman Food Dehydrator.

Q: How do filament dryers work?

A: The basic idea of a filament dryer is quite simple: it uses a combination of heat and airflow to evaporate the moisture from your filament. First up on our list of commercial filament dryers is the SUNLU filament dryer.

Q: Does sunlu dry box really dry filament?

A: It tends to eliminate the build-up of moisture from the surface of filament so all your old materials can be brought back to life again. This, in particular, is well-liked among people who have bought the SUNLU Dry Box. They say that it was able to dry their filament and make it as good as new.

Q: Is the aibecy eBox a good filament dryer?

A: Secondly, if you compare it to the Polymaker Polybox or even the SUNLU Filament Dryer, the Aibecy eBOX has much lesser functionality and is an underachiever for its price point. You might not want it for you’re looking for a standalone filament dryer.

Related Post: