Contents
20 Best Ipcampower Poe Switch of 2023 – Romance University
After hours researching and comparing all models on the market, Romance University finds out the Best Ipcampower Poe Switch of 2023. Check our ranking below.
2,310 Reviews Scanned
- POE POWERED 3 PORT 10/100 UNMANAGED POE SWITCH - This unique switch is powered by incoming POE power from your POE switch or POE injector. It has 1 POE input that passes POE and Data through to the 3 POE Outputs. Since it does not require traditional AC power, this gives the user the ability to install this POE switch anywhere without the need for a nearby power receptacle.
- POE AND DATA CABLE RUN EXTENDER - Not only does this act as a standard POE switch, it also gives you the ability to surpass the limitations of a standard 100 meter cable run. This unit can extend your incoming Data and POE transmission up to an additional 100 meters on all 3 output ports. Turn on the optional "Extend Mode" to boost the POE and Data Transmission on ports 2 and 3 to an incredible additional 250 meters (data rate will drop to 10 Mbps on these ports when enabled).
- OPTIONAL "VLAN" AND "EXTEND" MODE - There are 2 optional modes that can be activated by a dip switch on the unit. VLAN MODE: This isolates the 3 output ports from communicating and sending data to each other and each of these ports will only be able to communicate with the POE Input uplink port.
- POWERED BY INCOMING POE - This switch operates best with 30 watts of incoming POE, but can function at reduced capacity with lower wattage. It uses 5W for itself and channels remaining power to the 3 outputs. Compatible with standard POE types (802.3af/at/bt), utilizing max 30W. Output wattage budget is 25W total, shared across 3 ports (up to 25W per port).
- LOW PROFILE AND WALL MOUNTABLE - The unit is small and unassuming and can be conventiently installed on a flat surface or be wall mounted using the included wall mount ears. Size is only 8.25cm Wide (11.35cm Wide with mounts installed) x 5.5cm High x 2.4cm Deep
- 10 PORT Gigabit SWITCH - This switch features 8 10/100/1000 Mbps POE ports with 802.3af/at Power over Ethernet (PoE) capability, perfect for powering IP cameras, phones, and access points. Additionally, two 10/100/1000 Mbps non-PoE uplink ports are included for seamless connection to NVRs, servers, or routers, providing a versatile networking solution.
- OPTIMIZED POE POWER ALLOCATION: Engineered to deliver up to 30 watts per port under the 802.3at PoE+ standard, with a total power budget of 120 watts, this switch is ideally suited for both power-intensive and low-power devices. Backward compatibility with 802.3af ensures broad device support, making it an ideal choice for diverse PoE requirements.
- EXTEND MODE ALLOWS FOR UP TO 820' CABLE RUNS - The switch offers an "Extend Mode" feature, enabling cable runs up to 820 feet (250 meters) at 10Mbps on ports 1-8. This unique feature allows for the deployment of devices well beyond the standard 328' cable length limitations, providing both power and data over extended distances.
- ROBUST CONSTRUCTION AND DESIGN - Crafted with a heavy-duty metal case and a fanless design, this switch is designed for both aesthetic appeal in residential settings and durability in commercial environments. The integrated power supply eliminates the need for bulky external adapters, while the high temperature tolerance (32-132°F) ensures reliable operation under various conditions.
- HIGH QUALITY - This PoE switch offers peace of mind for both consumers and professional installers. This commitment to quality and customer satisfaction makes it a trustworthy investment for any PoE networking project. NDAA Compliant
- Equip your network with 48 Gigabit 10/100/1000 POE ports, each supporting up to 30W (POE+ 802.3at), with a 400W total budget. Perfect for powering IP Cameras, Access Points, IP Phones, and more. Plus, leverage 2 additional gigabit SFP uplink ports for high-speed non-POE connections to other switches and routers.
- GIGABIT SPEEDS & ENHANCED BANDWIDTH: Optimize your network with all 50 ports offering full gigabit throughput (10/100/1000), ensuring high-speed data transfer, low latency, and superior bandwidth. This device boasts sufficient bandwidth to accommodate a wide array of POE devices while also offering robust support for non-POE equipment, including computers, servers, and media devices, ensuring a versatile and comprehensive networking solution.
- ROBUST DESIGN; Benefit from a durable, rack-mountable design, ideal for various setups with its 1U size and included rack ears. Trust in the product's longevity, reflecting a commitment to quality and customer peace of mind, affirming this switch as a solid network infrastructure investment. 17.25" Wide x 11.375" deep x 1.75" Thick.
- EFFORTLESS PLUG-AND-PLAY UNMANAGED POE SWITCH: Engineered for immediate deployment, this switch requires no network configuration or intricate web setup. Its streamlined design ensures a hassle-free, straightforward connection, enabling swift operational readiness for all your devices.
- Invest with confidence in a premium POE Switch. This commitment to quality promises enduring performance and reliability, whether for personal or client-based installations, securing your network's future
- 24 POE PORTS WITH 2 ADDITIONAL NON-POWERED GIGABIT RATED PORTS - This unmanaged POE switch offers a total of 26 ports, comprising (24) 10/100 POE-rated ports ideal for IP cameras or other POE-enabled devices, and (2) additional non-powered Gigabit-rated uplink ports to facilitate seamless and efficient transfer of network traffic from your cameras to your NVR/Server and/or Router.
- EACH PORT CAPABLE OF PUSHING POE+ UP TO 30 WATTS PER PORT FOR POWER-HUNGRY DEVICES - This switch can supply up to 30 watts (POE+ IEEE802.3af/at) per port, catering to high-wattage devices such as PTZ cameras. It also adapts to lower-wattage POE devices by delivering only the required power, ensuring compatibility and efficiency.
- TOTAL POE WATTAGE BUDGET OF 360 WATTS - With a total POE wattage budget of 360 watts, this switch is capable of supporting at least 24 IP cameras, including a mix of POE+ (IEEE802.3at) and Standard POE (IEEE802.3af) devices. As long as the aggregate power consumption of all connected devices does not exceed 360 watts, this switch will perform optimally, meeting the demands of most deployment scenarios.
- UL LISTED, NDAA COMPLIANT, TAA COMPLIANT - This switch is UL listed and compliant with both TAA and NDAA standards, ensuring it is suitable for installation in residential, commercial, and enterprise environments, and meets stringent safety and regulatory requirements.
- RACK MOUNTABLE WITH INCLUDED RACK EAR MOUNTS - The package includes all necessary hardware for rack mounting. However, due to its compact and silent design, this switch can also be conveniently utilized in a desk-mounted setup.
- HIGH POWER EFFECIENCY AND VERSATILITY : Equip your network with All Gigabit 10/100/1000 POE ports, each supporting up to 30W (POE+ 802.3at), with an ample total budget. Perfect for powering IP Cameras, Access Points, IP Phones, and more. Plus, leverage additional non-poe gigabit uplink ports (both ethernet and SPF) for high-speed non-POE connections to other switches and routers.
- GIGABIT SPEEDS & ENHANCED BANDWIDTH: Optimize your network with all ports offering full gigabit throughput (10/100/1000), ensuring high-speed data transfer, low latency, and superior bandwidth. This device boasts sufficient bandwidth to accommodate a wide array of POE devices while also offering robust support for non-POE equipment, including computers, servers, and media devices, ensuring a versatile and comprehensive networking solution.
- EXTEND MODE: RUN CABLES UP TO 984': Simplify your long-distance connections with the unique POE Extend Mode, allowing continuous cable runs up to 984'. This adjusts speeds on the affected runs to 10 Mbps which is adequate for most all IP Cameras, but unlike other switches with this feature, this switch will only apply it to ports with cable runs over 100 meters, while maintaining gigabit speeds on all ports under 100 meters. An essential feature for IP Camera Installers.
- PORT ISOLATION & REBOOT REPAIR: Enhance your network's defense with the Port Isolation feature which prevents network traffic communication between the POE ports and only allows the traffic from each of those ports to be passed to the uplinks, acting similar to a VLAN. Additionally, Auto Port Reboot Repair provides resilience, automatically detecting and resolving power or network anomalies by rebooting compromised ports, ensuring uninterrupted, secure operations.
- ROBUST DESIGN & 3 YEAR WARRANTY: Trust in the product's longevity with an industry-leading 3-year hassle free warranty, reflecting a commitment to quality and customer peace of mind, affirming this switch as a solid network infrastructure investment. Rack Ears Included
Last update on 2025-07-02 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Ipcampower Poe Switch?
Do you get stressed out thinking about shopping for a great Ipcampower Poe Switch? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Ipcampower Poe Switch, which is why we have assembled a comprehensive list of the greatest Ipcampower Poe Switch available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Ipcampower Poe Switch that you consider buying. Your questions might include the following:
- Is it worth buying an Ipcampower Poe Switch?
- What benefits are there with buying an Ipcampower Poe Switch?
- What factors deserve consideration when shopping for an effective Ipcampower Poe Switch?
- Why is it crucial to invest in any Ipcampower Poe Switch, much less the best one?
- Which Ipcampower Poe Switch are good in the current market?
- Where can you find information like this about Ipcampower Poe Switch?
We’re convinced that you likely have far more questions than just these regarding Ipcampower Poe Switch, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Ipcampower Poe Switch, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Ipcampower Poe Switch. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides an Ipcampower Poe Switch buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Ipcampower Poe Switch currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Ipcampower Poe Switch has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Ipcampower Poe Switch?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Ipcampower Poe Switch.
- Customer Ratings: Number ratings grade Ipcampower Poe Switch objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Ipcampower Poe Switch.
- Product Quality: You don’t always get what you pay for with an Ipcampower Poe Switch, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Ipcampower Poe Switch is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining Ipcampower Poe Switch information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Ipcampower Poe Switch is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
FAQ:
Q: Do PoE switches support IP cameras?
A: Most standard POE switches that you see in the market are not built with IP cameras in mind, quite often falling short of power requirements that IP cameras demand. All of our switches are robust and powerful enough to handle the majority of all IP cameras in the market.
Q: How much power does a 24 port PoE switch use?
A: IPCamPower 24 Port POE Switch W/ 2 Gigabit Uplinks | Extend Mode 800′ Cable Runs, POE+ Capable of 30 Watts per Port, 250 Watts Budget IPCP-24P2G-EXAF IPCamPower is headquartered in Tulsa, OK, right in the heartland of the USA.
Q: How much power does the ipcp-8p2g-exaf switch use?
A: IPCamPower 4 Port 802.3bt POE Network Switch W/ 2 Uplink Ports | POE++ Capable of Pushing 60 Watts per Port | 250 Watts Total Budget IPCP-4P2G-BT1 8 Port POE Switch W/ 2 Uplink Ports | Extend Mode for 800′ Cable Runs | POE+ Capable of 30 Watts per Port | 130 Watts Total Budget IPCP-8P2G-EXAF
Q: Why choose ipcampower?
A: Initiated in 2015, IPCamPower was started with one goal in mind: To supply cost effective and reliable POE switches that are designed specifically for IP Cameras. Most standard POE switches that you see in the market are not built with IP cameras in mind, quite often falling short of power requirements that IP cameras demand.