Skip to content

The Best Kapton Tape 3D Printer of 2023 – Reviewed and Top Rated

2,084 Reviews Scanned

Rank No. #1
APT, 1 mil Thick Polyimide Adhesive Tape, HighTemperature and Heat Tape, for Masking, Soldering, Electrical, 3D Printer Application. (3" x 36 yds)
  • 【Wide Area of Applications】-Used for electronic products, soldering, circuit boards, manufacturing, fiber optics cable, insulating circuit boards, ground barrier & insulation for coils, 3D printing, high temperature sublimation powder coating, etc.
  • 【High Temperature】- APT Polyimide tape has highly excellent heat & solvent resistance. Minimal shrinkage after baking and clean removal, and also shows the great electrical insulation. It maintain high-temperature resistance as high as 400F (260℃).
  • 【Clean Removal, No Residue】- Our high temperature tape can withstand up to 400F (260℃) degrees. Remove cleanly, leaves no residue.
  • 【No Shrinking, Curling, Or Lifter Edges】- Made with high temperature silicone adhesive and premium film. Our tape resists curling, shrinking, and lifted edges every time.
  • 【Trusted Every Where】- Our tape do not contain any harmful chemicals, and complies with RoHs & Reach requirements. It is rigorously tested and meets American Society for Testing and Materials D-5213 standard, for high performance every time.
Rank No. #2
CCHUIXI Kapton Tape, Heat Resistant Tape, 1 Mil Polyimide Film Tape,6 in x 36 yd. for 3D Printer Surface, Soldering, Insulation and Bonding - No Residue.
  • Heat resistant tape ,made from polyimide film with high temperature resistant silicone adhesive
  • The highest temperature up to 662 ℉(350℃), Long-term temperature: 536 ℉(280℃)& Short-term temperature: 662 ℉(350℃)
  • Excellent heat & solvent resistance Minimal shrinkage after baking and clean removal
  • Used on insulating circuit boards, etching, automotive sensor and manifolds,fiber optics cable, high temperature powder coating and semiconductor manufacturing.
  • Size: 6 inch(150mm) x 36yds x 1 roll. If you are not satisfied, we will refund 100% of your purchase.
Rank No. #3
CCTREE 15PCS 3D Printer Heating Block Cotton with Kapton Tape Hotend Nozzle Heat Insulation Cotton for Ultimaker/Makerbot/Creality CR-10
  • Heat preservation, keep the printer heating evenly and work better
  • You can Punch Holes or Cut fit size to the cotton.
  • Recommend Safe Working Temperature : <300°C
  • Cotton Size: 70mm x 20mm x 2mm Kapton:Width 6mm, Lenght:33M
  • Package including:15PCS x 2mm heating block cotton + 1PCS x 6mm Kapton Tape
SaleRank No. #4
TAPEGO High Temperature Heat Resistant Tape for Heat Transfer 3D Printers High Temp Tape,Kapton Tape Electronics Polyimide Tape 1 inch 36yds
  • High Temperature Tape is made from polyimide film with silicone adhesive,Kapton Tape 100% brand new and No brittle after heating.
  • Features of Heat Resistant Tape:High insulation, high temperature resistance, acid and alkali-resistance, low electrolysis, mechanically sound, crocking resistance, tear-resistance.
  • Heat Tape Color: mainly tawny. High temp tape with silicone adhesive is easy to release and leaves no residue.
  • Heat transfer tape great for 3D Printing,Mug press, Heat press, T shirt application or other Thermal transfer printing. This heat press tape keep your design in place when you making shirts,help to do heat transfer vinyl on a heat press.
  • Polyimide tape extensive use for insulated circuit boards, masking circuit boards,electrical insulation and splicing wires, motor insulation, and protected lithium battery.Heat press tape also used for automotive sensors and manifolds, fiber optic cables, high temperature powder coatings and semiconductor manufacturing.
Rank No. #5
Gizmo Dorks Polyester Film PET Tape for 3D Printers and Printing, 8 x 8 inches, 10 Sheets per Pack
  • Premium grade polyester PET tape for 3D printing
  • Excellent adhesion to many 3d filament types such as PLA and ABS
  • PET tape can be used for many 3D print cycles with greater durability than Kapton
  • PET film layer is 1 mil thick with a 1 mil thick adhesive layer
  • Dimensions of 8 x 8 inches, can be cut to size easily
Rank No. #6
Tapes Master - 1/2" x 36 Yds - 1 Mil Kapton Tape – Polyimide High Temp Tapes with Silicone Adhesive - 3” Core - for 3D Printer Surface, Soldering, Insulation and Bonding - No Residue
  • Alternative to 3M Kapton Tape 5413: Tapes Master 1 Mil polyimide tape is alternative to 3M Kapton tape 5413. The tape is a HN general purpose amber color film with silicon adhesive and 3” polyethylene core. Rosh approved and Halogen Free
  • High Temperature Resistant - Flame Retardant: Polyimide tape not only flame retardant (at temperatures as low as -273°C (-459°F) and as high as 400°C (752°F)), but also chemical and radiation resistant which protects surfaces to help reduce replacement costs
  • No Residue after Peeling Off: Polyimide film does not soften at elevated temperatures, thus provides an excellent release surface at elevated temperatures. In addition, silicone adhesive's high temperature performance reduces adhesive transfer which helps to eliminate cleaning, enabling high productivity
  • Protection, Insolation and Bonding: Protection of gold fingers: of printed circuit boards during wave solder or solder dip process. Insulation and Bonding for electrical switches, motor, lithium battery under Grade H
  • Surface for 3D printers: Kapton and ABS adhere to each other very well, therefore is the recommended use of Kapton as a bed surface for 3D printers
Rank No. #7
Tapes Master - 7" x 36 Yds - 1 Mil Polyimide High Temperature Heat Resistant Heat Transfer Thermal Electrical Insulation 3D Printer Surface Tape with Silicone Adhesive 3” Core, No Residue
  • Alternative to 3M Kapton Tape 5413: Tapes Master 1 Mil polyimide tape is alternative to 3M Kapton tape 5413. The tape is a HN general purpose amber color film with silicon adhesive and 3” polyethylene core. RoHS approved and Halogen Free.
  • High Temperature Resistant - Flame Retardant: Polyimide tape not only flame retardant (at temperatures as low as -273°C (-459°F) and as high as 400°C (752°F)), but also chemical and radiation resistant which protects surfaces to help reduce replacement costs
  • No Residue after Peeling Off: Polyimide film does not soften at elevated temperatures, thus provides an excellent release surface at elevated temperatures. In addition, silicone adhesive's high temperature performance reduces adhesive transfer which helps to eliminate cleaning, enabling high productivity.
  • Protection, Insolation and Bonding: Protection of gold fingers: of printed circuit boards during wave solder or solder dip process. Insulation and Bonding for electrical switches, motor, lithium battery under Grade H
  • Surface for 3D printers: Kapton and ABS adhere to each other very well, therefore is the recommended use of Kapton as a bed surface for 3D printers
Rank No. #8
AIYUNNI High Temp Tape, (8 inch X 108 FT) Polyimide High Temperature Resistant Tape Silicone Adhesive - for 3D Print Bed,Soldering,Masking etc.
  • ✔High Temp Tape Dimension:200mm x 108 ft x 0.05mm (Width x Length x Thickness)It is easy to cut to any size and length you want.
  • ✔High Temperature Tape:Made of Polyimide film with silicone adhesive.for easy release and leaves no residue after peel away.
  • ✔High Temperature Resistance:They are compatible with a wide temperature range as low as -73°C (-99°F) and as high as 300°C (572°F).Polyimide polymer films provide great insulation and protect the nearby component from excessive heat from the hot air rework.
  • ✔Wide Applications:for Automotive sensor and manifolds,Insulating circuit boards,Etching,Fiber Optics Cable,High temperature powder coating,Semiconductor manufacturing,Wave soldering during circuit board assembly,3D Printing,LED strips,Electronic Repair,Solar industries,frequency conversion power,transformer etc.
  • ✔From insulating circuit boards to high-temperature powder coating, you can use AIYUNNI high temp tape in all your projects that involve harsh heat environment.
Rank No. #9
Gizmo Dorks Polyester Film PET Tape for 3D Printers and Printing, 10 x 10 inches, 10 Sheets per Pack
  • Premium grade polyester PET tape for 3D printing
  • Excellent adhesion to many 3d filament types such as PLA and ABS
  • PET tape can be used for many 3D print cycles with greater durability than Kapton
  • PET film layer is 1 mil thick with a 1 mil thick adhesive layer
  • Dimensions of 10 x 10 inches, can be cut to size easily
Rank No. #10
Gizmo Dorks 3D Printing Platform Blue Tape 8" x 8" (10 Pack)
  • 3D printer blue tape is designed to create an optimal adhesion for the first layer of your print
  • Print most 3D filament types such as ABS and PLA with easy removal of the printed part
  • Printed parts come off cleanly without any messy or ugly lines on the bottom of the print
  • Easily apply the precut sheets to the printing platform and use a straight edge to lay down the tape without any bubbles
  • These 3D printing blue tape sheets come in a pack of 10 and are 8 x 8 inches
Rank No. #11
Gizmo Dorks Polyester Film PET Tape for 3D Printer Build Plate, 12 x 12 inches, 10 Sheets per Pack
  • Premium grade polyester PET tape for 3D printing
  • Excellent adhesion to many 3d filament types such as PLA and ABS
  • PET tape can be used for many 3D print cycles with greater durability than Kapton
  • PET film layer is 1 mil thick with a 1 mil thick adhesive layer
  • Dimensions of 12 x 12 inches, can be cut to size easily with an easy to peel backing
SaleRank No. #12
Tapes Master - 1/8" x 36 Yds - 1 Mil Kapton Tape – Polyimide High Temperature Tape with Silicone Adhesive - 3” Core - for 3D Printer Surface, Soldering, Insulation and Bonding - No Residue
  • Alternative to 3M Kapton Tape 5413: Tapes Master 1 Mil polyimide tape is alternative to 3M Kapton tape 5413. The tape is a HN general purpose amber color film with silicon adhesive and 3” polyethylene core. Rosh approved and Halogen Free
  • High Temperature Resistant - Flame Retardant: Polyimide tape not only flame retardant (at temperatures as low as -273°C (-459°F) and as high as 400°C (752°F)), but also chemical and radiation resistant which protects surfaces to help reduce replacement costs
  • No Residue after Peeling Off: Polyimide film does not soften at elevated temperatures, thus provides an excellent release surface at elevated temperatures. In addition, silicone adhesive's high temperature performance reduces adhesive transfer which helps to eliminate cleaning, enabling high productivity
  • Protection, Insolation and Bonding: Protection of gold fingers: of printed circuit boards during wave solder or solder dip process. Insulation and Bonding for electrical switches, motor, lithium battery under Grade H
  • Surface for 3D printers: Kapton and ABS adhere to each other very well, therefore is the recommended use of Kapton as a bed surface for 3D printers
Rank No. #13
Gizmo Dorks 3D Printing Platform Blue Tape 6" x 6" (10 Pack)
  • 3D printer blue tape is designed to create an optimal adhesion for the first layer of your print
  • Print most 3D filament types such as ABS and PLA with easy removal of the printed part
  • Printed parts come off cleanly without any messy or ugly lines on the bottom of the print
  • Easily apply the precut sheets to the printing platform and use a straight edge to lay down the tape without any bubbles
  • These 3D printing blue tape sheets come in a pack of 10 and are 6.25 x 6.25 inches
Rank No. #14
OLYCRAFT 20 Sheet Painters Tape for 3D Printers 7.9x9.8 Inch High Adhesive Tape Great for A Variety of Surfaces for Art Lab Labeling Classroom Decorations - RoyalBlue
  • 【Package & Size】--Package include 20 sheet painter tape, size about 20cm/7.87” wide, 25cm/9.8” long, 0.02cm thick. Use the sheet for painted walls or aged, rougher surfaces that need comprehensive sealing with an easy-removal tape.
  • 【Painters Tape】--Blue painter tape is ideal for professional and DIY painters who want sharp paint lines without smudging.
  • 【Premium Material】--The painter tapes are made of high quality paper. It doesn’t tear easily but still can be cut off, heat resistant high temperature.
  • 【Easy to Use】--Quickly remove tape after paintings without fear of ruining your hard work with our mild adhesive that will not rip your paint or dry wall when removing. No need for razor blades or picking small pieces off the wall after painting.
  • 【Wide Application】--This medium adhesion tape allows quick application on smooth and semi-smooth surfaces. It can be used across plain and curved surfaces. Material compliance is rather good and the tape can be used on wood, glass, walls, and metals.
Rank No. #16
4 Roll - 10mm x 33m (108ft) SAMKARIM Heat Resistant Transfer Tape for Sublimation - Leaves No-Mark or Residue, Strong Adhesive Kapton Tape Perfect for Heat Press, 3D Printer, Soldering, and PCB Boards
  • Premium Quality Heat Transfer Tape: Our tape is polyimide film thermal tape with silicone adhesive. Heat resistant up to 260℃, it can comply with severe mechanical stresses with flexibility and thickness of 0.05mm
  • No Residues or Smell Sublimation Tape: Our heat tape leaves zero marks or residue on any material like mugs or fabric. It gives a clean peel without leaving messy and grubby marks, doesn’t bother you with smell
  • Strong Adhesive: Our heat transfer tape for heat press provides special silicone adhesive which firmly sticks with the material like fabric, mug, wires, automotive parts, PCB boards and keep them safe and intact even after multiple heating sessions
  • Versatile Application: Our heat press tape can not only help you with your business needs of heat pressing but also with electrical wires, soldering, 3D printer, PCB boards, automotive insulation, high-temperature powder coating, semiconductor manufacturing
  • Assured Quality: We are a USA-based brand that believes in providing value to our customers. Our main focus is on the quality we provide to our customers as we understand your usage. Buy heat transfer tape for heat press now to make it your absolute favorite
Rank No. #17
WOD KPT-1 Kapton Polyimide Tape High Heat Temperature Resistant Silicone Adhesive - 3 inch x 36 yd. - Ideal for 3D Printers Platform, BGA Heating, and Electric & Soldering Task
  • EASY INSTALLATION - WOD KPT-1 Heat Transfer Tape is easy to peal, comes off clean, and with no residue, reduces clean-up time and minimizes rejects, ideal for protecting sensitive printed circuit board (PCB) components such as gold leads and fingers during the process of wave soldering, it may be hand-pealed, with a scissor, or utility knife.
  • 3D PRINTER USES - This Cricut Heat Tape is a MUST when printing in shirts, hats, and more. Its polyimide film helps withstand high temperature and makes it conducive for installing on 3D printers with its heated build platforms. It also insulates your print from high voltage wonders experienced during Xerographic printing operations.
  • HIGH TEMPERATURE RESISTANCE - Its adhesive will thermoset to increase adhesion values, when resisting to high insulation, high temperature, acid, alkalines, crocking, and tearing. It will resist up to 200 C. Film meets UL510 and it is formulated to meet spec MIL-P-46112B.
  • MULTI PURPOSE APPLICATIONS - WOD KPT-1 Sublimation Tape is suitable for wave soldering shield of electronics, circuit board, motor, coil, capacitor, and transformer insulation. Also, for Masking, splicing wires, and protecting gold contacts from molten solder during hot air wave solder leveling process.
  • PEACE OF MIND SHOPPING 100% MONEY BACK GUARANTEE! - We sell Durable Kapton Alternative Polyimide Tape in multiple sizes. If you are not satisfied, we will do our due diligence to make sure you are completely satisfied with the product and service. Just send us an email, and we promise to make it right!
Rank No. #18
WOD KPT-1 Kapton Polyimide Tape High Heat Temperature Resistant Silicone Adhesive - 5/8 inch x 36 yd. - Ideal For 3D Printers Platform, BGA Heating, Electric & Soldering Task
  • EASY INSTALATION AND LEAVES NO RESIDUE – Heat resistant polymide tape is Ideal for protecting sensitive printed circuit board (PCB) components such as gold leads and gold fingers during the process of wave soldering. Leaves minimal residue when removed after manufacturing process; reduces clean-up time and minimizes rejects.
  • A MUST HAVE FOR 3D PRINTER BED - The polyimide film used in this tape helps withstand high temperature and makes it conducive for installing on 3D printers with the heated build platforms. With great heat resistance, it insulates your print from high voltage wonders experienced during Xerographic printing operations.
  • KAPTON TAPE PROPERTIES - High insulation, high temperature resistance (Adhesive will thermoset to increase adhesion values), acid and alkali-resistance, low electrolysis, mechanically sound, crocking resistance, tear-resistance, without rest on surface when tear. Heat resistance: about 200°C. Film meets UL510. Formulated to meet spec MIL-P-46112B.
  • MULTIPLE APPLICATIONS - High temp tape is use as electrical insulation for transformer, motor, coil, capacitor and frequency conversion power supply in electronic industry. Also, for Masking circuit boards, soldering, splicing wires, and protects gold contacts from molten solder during hot air wave solder leveling process.
  • PEACE OF MIND SHOPPING 100% MONEY BACK GUARANTEE! - We sell Durable Kapton Alternative Polyimide Tape in multiple sizes. If you are not satisfied, we will do our due diligence to make sure you are completely satisfied with the product and service. Just send us an email, and we promise to make it right!
Rank No. #19
Gizmo Dorks Polyester Film PET Tape for 3D Printers 6.25" x 100'
  • PET Film Layer is 1 Mil thick
  • Silicone Adhesive
  • Excellent adhesion even at high temperatures
  • Use on ABS, PLA, T-glase, Wood, and more
  • Apply with ease and removes cleanly
Rank No. #20
MG Chemicals - POL100-15 Polyimide Tape for 3D Print Beds, High-Temperature, 4" Width x 49' Length
  • Superior quality Polyimide tape for 3D printing of ABS Filaments. Use for multiple prints before having to change the tape.
  • High temperature tape for filaments requiring heated build beds
  • Apply an ABS Slurry to the tape so your ABS prints stick to the heated bead.
  • Polyimide tape has 1 mil of Polyimide film with 1 mil of silicone adhesive
  • 4" wide by 49' in length

Last update on 2023-07-29 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Kapton Tape 3D Printer?

Do you get stressed out thinking about shopping for a great Kapton Tape 3D Printer? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Kapton Tape 3D Printer, which is why we have assembled a comprehensive list of the greatest Kapton Tape 3D Printer available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Kapton Tape 3D Printer that you consider buying. Your questions might include the following:

  • Is it worth buying an Kapton Tape 3D Printer?
  • What benefits are there with buying an Kapton Tape 3D Printer?
  • What factors deserve consideration when shopping for an effective Kapton Tape 3D Printer?
  • Why is it crucial to invest in any Kapton Tape 3D Printer, much less the best one?
  • Which Kapton Tape 3D Printer are good in the current market?
  • Where can you find information like this about Kapton Tape 3D Printer?

We’re convinced that you likely have far more questions than just these regarding Kapton Tape 3D Printer, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Kapton Tape 3D Printer, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Kapton Tape 3D Printer. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Kapton Tape 3D Printer buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Kapton Tape 3D Printer currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Kapton Tape 3D Printer has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Kapton Tape 3D Printer?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Kapton Tape 3D Printer.
  5. Customer Ratings: Number ratings grade Kapton Tape 3D Printer objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Kapton Tape 3D Printer.
  7. Product Quality: You don’t always get what you pay for with an Kapton Tape 3D Printer, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Kapton Tape 3D Printer is should be an indication of how long it will work out for you.

We always remember that maintaining Kapton Tape 3D Printer information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Kapton Tape 3D Printer is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: