Skip to content

The Best Kenwood Subwoofers of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Kenwood Subwoofers of 2023. Check our ranking below.

2,191 Reviews Scanned

Rank No. #1
Kenwood KFC-W120SVC Road Series 12" Passive Car Subwoofer - 1000W, 36Hz-300Hz Frequency Range, 4-Ohm Impedance, Polypropylene Woofer Cone, Deep, Powerful Bass
  • ADD POWERFUL BASS TO YOUR FAVORITE TRACKS: The KENWOOD KFC-W120SVC Road Series 12" single-voice coil car subwoofer features 1000W peak power, 4-ohm impedance, and a polypropylene woofer cone, delivering high quality music that sounds like the original
  • POWER UP YOUR CAR AUDIO: This subwoofer for car features a nominal power of 250W RMS, 300Hz frequency response, and 85dB sensitivity that together ensure faithful and accurate sound reproduction with pristine highs, deep lows and rich bass
  • SOPHISTICATED SOUND: For an incredible boost in performance and exceptional sound quality, the KFC-W120SVC features a 4-ohm impedance, which conducts power evenly to keep the speakers at an appropriate level, adding a booming bass even at high volumes
  • EASY TO INSTALL: This 12" subwoofer features ready-push terminals, so you can quickly set up your wiring configuration while the heavy duty magnet design with a shallow depth allows for easy installation and durability
  • A BRAND YOU CAN TRUST: With a wide range of high-performing car audio accessories, headsets, professional communication gadgets, speakers, bike cameras, and more, KENWOOD is the one-stop destination for all your technological requirements
Rank No. #2
KENWOOD KAC-D5101 1000W Max Power 4-Ohms Mono Amp Class D | Plus KENWOOD P-W3041S Ported 4-ohm Enclosure Preloaded with Single 12" Subwoofer for Car Audio Stero System
  • Max Power: 1000W
  • RMS POWER OUTPUT (4Ω): 300W
  • Speaker Level Input / Signal Sensing Turn-On
  • Variable Low Pass Filter / Bass Boost
  • KENWOOD P-W3041S: X-Motif Cap controls resonance frequency and cuts unnecessary frequency, Computer-optimized damper controls stress and increases mechanical durability,
Rank No. #3
Kenwood KSC-PSW8 250W Max (150W RMS) Single 8" Under Seat Powered Subwoofer Enclosure W/Remote Control
  • Class D amplifier
  • 150 watts RMS power (250 watts maximum)
  • Frequency response: 35-150 Hz
  • Sensitivity: 81 dB
Rank No. #4
Kenwood KFC-WPS1000F 10-Inch Car Component Subwoofer 1000-Watts
  • 10-Inch Car Subwoofer
  • 1000 Watts Max Power
  • 250 Watts RMS Power
  • 4-Ohm Voice coil
Rank No. #5
Kenwood Excelon KFC-XW1041 10" 4-ohm Component Subwoofer
  • 2-piece polypropylene cone with rubber surround
  • power handling: 300 watts RMS (1300 watts peak)
  • top-mount depth: 4-7/8"
Rank No. #6
Pair of Kenwood KFC-W3041 12" 4 Ohm 2000W Car Subwoofer (2 Pieces) with Gravity Magnet Phone Holder Bundle
  • Kenwood KFC-W3041 (Pair) + Gravity Magnet Phone Holder Bundle
  • Subwoofer Type 12 inch PP Cone
  • Peak Power 2000 W (300 W RMS)
  • Frequency Response 29Hz-300Hz
  • Impedance 4 ohms / Mounting Depth 5-3/8 inch
Rank No. #7
Kenwood KSC-PSW7EQ Compact Powered Enclosed Subwoofer for CAR
  • POWER: 160 Watts Built-In Class D Max Power
  • SOUND QUALITY: Active EQ has 3 types of bass to match your music genre. Heavy, Flat and Tight. Custom adjust the bass to your music
  • REMOTE CONTROL: Included wired remote control for precise sound adjustment from your seat
  • COMPACT DESIGN: Allows for installation almost anywhere, including tight spaces such as under a seat or panel
  • DIMENSIONS: 11 x 2-3/4 x 7-7/8 Inches
Rank No. #8
Kenwood KFC-W3041 12" 4 Ohm 2000W Car Subwoofer (Single) with Gravity Magnet Phone Holder Bundle
  • Kenwood KFC-W3041 (Single) + Gravity Magnet Phone Holder Bundle
  • Subwoofer Type 12 inch PP Cone
  • Peak Power 2000 W (300 W RMS)
  • Frequency Response 29Hz-300Hz
  • Impedance 4 ohms / Mounting Depth 5-3/8 inch
Rank No. #9
Kenwood KFC-W3041 Car Subwoofer - 2000 Watts Maximum Power, 12 Inch, Single 4 Ohm Voice Coil, Sold Individually
  • PERFORMANCE: Multi Layer polypropylene cone with KENWOOD Designed X-Motif for delivering powerful and solid bass
  • Sealed Enclosure Internal Volume: 1.25 Cubic Feet, Ported Enclosure Internal Volume: 1.5 Cubic Feet
  • 5-3/8 Inch Mounting Height, 11-1/8 Inch Mounting Hole Diameter
  • Dimensions: Length 13" X Wudth 13" X Height 6.125
  • Closed Yoke with Advanced Airflow Control: Sub has a robust thermal management system implemented with an Aluminum Bobbin, Closed Yoke Design, and Advanced Airflow Control
Rank No. #10
Kenwood Excelon P-XW1221DHP 2-ohm Ported Enclosure with Two 12" Subwoofers | Dual 12" Preloaded High Power Subwoofer Enclosure
  • The Kenwood Excelon P-XW1221DHP ported subwoofer enclosure features 2 heavy-duty 12" drivers, internally wired for a 2Ω output, that can handle 1000W RMS with peak power up to 2000W.
  • The injection-molded Polypropylene cones feature a dual area cap that provides the rigidity needed for high-power handing while delivering accurate bass.
  • Extra thick legs support the weight of the system when installed in a down-firing application. This ensures the low frequency energy is transmitted without loss, resulting in powerful, impactful bass.
  • The P-XW1221DHP is constructed of 5/8" thick MDF (Medium Density Fiberboard) with a 3/4" thick baffle, providing outstanding strength and durability for maintaining tight accurate bass at high volumes.
  • The P-XW1221DHP includes a single pair of nickel-plated spring-post connectors that can accept speaker wire up to 8AWG. The total output impedance at the connectors is 2Ω.
Rank No. #11
Kenwood Excelon KFC-XW1241 12" 4-ohm Component Subwoofer
  • 2-piece polypropylene cone with rubber surround
  • power handling: 300 watts RMS (2000 watts peak)
  • top-mount depth: 5-3/8"
SaleRank No. #12
Kenwood Excelon KFC-XW1200F 12" Shallow Component Subwoofer
  • carbon-glass fiber cone with butyl rubber surround
  • power handling: 350 watts RMS (1400 watts peak)
  • mounting depth: 3-15/16"
Rank No. #13
Kenwood P-W3021D Dual 12" Loaded Subwoofer Enclosure
  • X-Motif Cap: X-Motif Cap controls resonance frequency and cuts unnecessary frequency, delivering powerful and solid bass response
  • Closed Yoke with Advanced Airflow Control: Subwoofer have a robust thermal management system, implemented with an Aluminum Bobbin, Closed Yoke Design, and Advanced Airflow Control
  • Stress Controlled Spider: Computer-optimized damper controls stress and increases mechanical durability
  • Multiple Position Options: Forward, Rear, or Down-Firing installation available
  • Slant Back Design: Easily fits behind the rear set of an SUV and is more effective in suppressing standing waves that typically occur in a standard square enclosure
Rank No. #14
Kenwood X502-1 eXcelon 500-Watt @ 2 Ohms Class D Subwoofer Amplifier | Plus Excelon P-XW1221SHP 12" Preloaded High Power Subwoofer Enclosure
  • Max Power 1000W
  • Variable Low Pass Filter
  • Bass Boost
  • Optional Wired Remote Ready
  • The KENWOOD Excelon P-XW1221S ported subwoofer enclosure features a single heavy-duty 2Ω, 12" driver that can handle 500W RMS with peak power up to 2000W.
Rank No. #15
Kenwood Excelon P-XW1221SHP 12" Ported Subwoofer Enclosure
  • Polypropylene cone with "dual area" dustcap
  • Down-firing design for greater output and more installation flexibility
  • Extra thick legs support the weight of the system when installed in a down-firing application; This ensures the low frequency energy is transmitted without loss, resulting in powerful, impactful bass
  • The injection-molded Polypropylene cone features a dual area cap that provides the rigidity needed for high-power handing while delivering accurate bass
Rank No. #16
KENWOOD X502-1 eXcelon 500-Watt @ 2 Ohms Class D Subwoofer Amplifier | Plus KENWOOD Excelon P-XW1221D Ported 2-ohm Dual Loaded Enclosure with Two 12" Subwoofers
  • Max Power 1000W
  • Variable Low Pass Filter
  • Bass Boost
  • Optional Wired Remote Ready
  • Ported enclosure with two 12" subwoofers // wired for 2 ohms total impedance
Rank No. #17
Kenwood Excelon P-XW804B 8" Ported Subwoofer Enclosure
  • ribbed polypropylene cone with rubber surround
  • 4-ohm impedance
  • power handling: 300 watts RMS (900 watts peak power)
Rank No. #18
Kenwood EXcelon KFC-XW800F 600W Peak (150W RMS) 8" EXcelon Series Shallow-Mount Single 4 Ohm Slim Subwoofer
  • 8" Single 4 ohm shallow mount subwoofer | power handling: peak: 600 watts | RMS: 150 watts | Recommended power range: 50 - 150 watts RMS
  • Carbon-glass fiber composite Cone woofer | Butyl rubber surround
  • Super linear spider for maximum control over the woofer's linear motion | dual Magnet drive
  • Removable gasket | heat transfer system designed to provide ventilation to keep the woofer cool
  • Aluminum-cast Basket for long-lasting reliability | frequency response: 40 - 500 Hz | Sensitivity: 78 dB
Rank No. #19
Kenwood Excelon P-XW1221D Ported 2-ohm Dual Loaded Enclosure with Two 12" Subwoofers
  • ported enclosure with two 12" subwoofers // wired for 2 ohms total impedance
  • polypropylene cone with diamond array pattern // stress controlled spider
  • 5/8" MDF construction with 3/4" MDF baffle // power handling: 600 watts RMS (2000 watts peak)
  • total impedance: 2 ohms // frequency response: 29-300 Hz
  • spring-post terminals accommodate up to 8-gauge wire // can be installed as front-, rear-, or down-firing, grilles included
Rank No. #20
Kenwood P-XW1241S eXcelon 12" Preloaded Subwoofer Enclosure
  • polypropylene cone with diamond array pattern and rubber surround
  • 5/8" MDF construction with 3/4" MDF baffle board
  • power handling: 300 watts RMS (2000 watts peak)

Last update on 2023-09-08 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Kenwood Subwoofers?

Do you get stressed out thinking about shopping for a great Kenwood Subwoofers? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Kenwood Subwoofers, which is why we have assembled a comprehensive list of the greatest Kenwood Subwoofers available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Kenwood Subwoofers that you consider buying. Your questions might include the following:

  • Is it worth buying an Kenwood Subwoofers?
  • What benefits are there with buying an Kenwood Subwoofers?
  • What factors deserve consideration when shopping for an effective Kenwood Subwoofers?
  • Why is it crucial to invest in any Kenwood Subwoofers, much less the best one?
  • Which Kenwood Subwoofers are good in the current market?
  • Where can you find information like this about Kenwood Subwoofers?

We’re convinced that you likely have far more questions than just these regarding Kenwood Subwoofers, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Kenwood Subwoofers, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Kenwood Subwoofers. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Kenwood Subwoofers buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Kenwood Subwoofers currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Kenwood Subwoofers has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Kenwood Subwoofers?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Kenwood Subwoofers.
  5. Customer Ratings: Number ratings grade Kenwood Subwoofers objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Kenwood Subwoofers.
  7. Product Quality: You don’t always get what you pay for with an Kenwood Subwoofers, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Kenwood Subwoofers is should be an indication of how long it will work out for you.

We always remember that maintaining Kenwood Subwoofers information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Kenwood Subwoofers is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: