The Best Lathe Tool Sharpening Jig of 2023 – Reviewed and Top Rated
2,946 Reviews Scanned
Rank No. #1
Pro Grind Sharpening System For Lathe Turning Tools, Chisels, Skews, Gouges, Bowl Gouges, Spindle Gouges and More. Includes the Multi-Grind Jig for Gouges, Slotted Platform and Tool Rest
- Sharpen chisels, gouges, bowl gouges, spindle gouges, carving tools, wood turning scrapers, parting tools, block plane irons and more with the PRO GRIND Sharpening System! With 3 primary methods of sharpening, you’ll be able to precisely hone each tool to your exacting specifications regardless of the tool you are sharpening. The PRO GRIND Sharpening System includes a vast collection of unique setup tools, jigs and accessories that most sharpening systems force you to purchase separately
- The included and versatile Multi-Grind Jig will correctly shape the edge on bowl gouges, side grinds (aka Ellsworth grind, Liam O’Neil grind/Irish grind) or fingernail grinds for spindle work and detailing. Not only will it correctly shape your tools, you will also be able to repeat the process to produce consistent results every time. The Multi-Grind Jig is designed to be used with the included Multi-Grind arm on the PRO GRIND Sharpening System and will accept tools up to 1.125” in diameter.
- The PRO GRIND Tool Rest Bar attachment offers you the best possible way to achieve a precise edge to your bevels without taking of too much material off of your tool. After all, we need our tools to last a long time, so why would you want to take off to much at a time? The Tool Rest Bar is ideal for sharpening curved, even bevel edges that are typically used on spindle and roughing gouges.
- The large, 3” x 5” slotted platform is the ideal way to sharpen flat edged tools like wood turning skews, chisels and hand plane irons. The platform has a slot milled horizontally through it so it can accept the included tool holder. The tool holder is designed to keep your tools at the correct angle while being able to slide side to side during the sharpening process.
- The PRO GRIND Sharpening System also comes with a number of setup jigs and accessories to help in the setup process to sharpen your tools to the proper and repeatable angles. From the built-in projection gauge on the Multi-Grind arm to the Magnetic Micro Bevel setup block you’ll be able to achieve consistent repeatable angles and produce excellent results each and every time you use the PRO GRIND Sharpening Jig system.
Rank No. #2
Wolverine Grinding System with VARI-GRIND jig and Setup Blocks
- Produce razor sharp tools and finely finished bevels
- INCLUDES: the Wolverine Sharpening System & The VARI-GRIND jig and setup blocks!
- The Wolverine System was designed to replace conventional light duty toolrests with heavy duty universal grinding and dressing jigs for low cost grinders.
- Comes with 2 Set Up Blocks for setting the VARI-GRIND Jig witch saves time, frustration and money
- Grinder and Turning Tools NOT included
Rank No. #3
Tormek SVD-186 R Gouge Jig - for Sharpening Woodturning & Woodworking Tools
- Made for Fingernail Shaped Turning Gouges
- Quickly Produce a Repeatable Razor Edge
- Can be Used for Various Lengths on the Side Bevel
- Can also be used for Bent Carving Gouges, V-Tools and Violin Making Knives
- Maximum Width of Blade is 1-3/8 Inch
Rank No. #4
Ron Brown's Best Quad Platform SettingJig For Wood Lathe Tools - Roughing Gouge, Skew, Parting Tool, Bowl Scraper
- Sets Platform Grinding Angles Quickly and Repeatably
- Includes Settings For Skew, Parting Tool, Bowl Scraper and Roughing Gouge
- Sets on platform and makes two points of contact to set the perfect angle
- Designed to use all four sides, no adjustments needed
- Calibrated for 8 inch grinding wheels
Rank No. #5
Robert Sorby # 445 Fingernail Profiler Sharpening Jig for Spindle and Bowl Gouges Works with Bench Grinders
- Sorby fingernail profiler will work with any bench grinder of vertical belt sander
- Designed to aid the turner who has difficulty in sharpening his bowl and spindle gouges free hand
- The geometry of the Fingernail Profiler ensures that only regular pressure can be applied thereby ensuring a clean, ‘as new’ finish on the bevel every time.
- Will help to replicate long grinds, conventional square grinds or anything in between
- Come with complete instructions
Rank No. #6
Ron Brown's Best Quick Sharpening Aids For Wood Lathe Tools
- Use With OneWay Wolverine Sharpening Jig or Equivalent
- Calibrated For Use With 8" Grinding Wheels
- Quickly Set Sharpening Jig To Proper Grinding Angles
- Use For Bowl Gouge, Spindle Gouge, Skew, Bowl Scraper, Parting Tool and Roughing Gouge
- 100% Made In America Designed By A Professional Wood Turner For Wood Turners
Rank No. #7
Oneway Wolverine Grinding Jig with Quad Setup Jig for Sharpening Workshop Tools • Woodturning Gouges • Chisels • Scrapers • Skews and Wood Carving Tools
- The Oneway Wolverine Grinding Jig is the core component of the Oneway Wolverine line of grinding products. Producing razor sharp tools and finely finished bevels has moved from an art into a science. Owning the Wolverine Grinding Jig will ultimately save you time, frustration and money.
- The Oneway Wolverine Grinding Jig is the core component of the Oneway Wolverine line of grinding products. Producing razor sharp tools and finely finished bevels has moved from an art into a science. Owning the Wolverine Grinding Jig will ultimately save you time, frustration and money.
- The included Quad Setup Jig helps you correctly set the proper grinding angles for Roughing Gouges at 45 deg, Parting Tools at 30-60 deg, Skews at 21.5-43 deg and Bowl Scrapers at 8 deg. Its called the “Quad Setting Jig” since one jig sets the correct angles for all 4 of the other HSS woodturning lathe tools. The Quad Setting Jig is designed to be used with 8” bench grinders.
- Carpenter chisels up to 1-1/4" wide can be sharpened using the Wolverine's Vee-Arm. The arm is adjusted to set the bevel, and the chisel can be ground with small sideways motions and light cutting pressure. Three or four strokes on a strop will generate a razor sharp edge. The Wolverine Grinding Jig comes with a 3 x 5 inch adjustable platform which allows even large scrapers to be ground with ease.
- Parting tools are sharpened using the platform. Laying it flat on its side on the platform gives a slight hollow grind which is very desirable for clean parting. The Wolverine's Vee arm can be used to sharpen skews, but a far superior method is ONEWAY's Skew Grinding Attachment (not included). With a finely dressed 80 or 120 grit wheel, even very small carving tools can be superbly ground using the standard Vee-Arm.
Rank No. #8
VEVOR Grinding Jig, 24" Length of V-arm Vari-Grind Attachment, 3" x 5" x 1/4" Platform Grinding Jig with Vari-Grind, Fit 0.63" Bowl Gouge Vari-Grind Jig for The Wolverine Sharpening System（5pcs Set)
- Added Hole Location: The vari-grind attachment adopts a thoughtful design, the platform added groove, which improves the compatibility of product and machine. The two additional holes can fix the appliance and increase the stability of operation.
- Black Coating Surface: vari-grind attachment surface by spraying powder coating to the support surface with powder spraying equipment. Powder spraying is superior to spray paint in mechanical strength, adhesion, corrosion resistance, and aging resistance.
- Standard Dimension: Complete Kit includes standard bases, V-arm, and platform. (V-Arm measures 24" / 61 cm long and Platform measures 3" x 5" x 1/4" thick). Precise dimensions to accommodate more machinable bars.
- Complete Component: Complete kit includes a 5-piece set: A fish board ruler, two knife grinding support bases, and two side supports. By mounting one under each wheel, grinding operations can be rapidly performed on either side of your grinder without re-position bases.
- Wide Application: The lathe tool sharpening jig is widely used, mainly for grinding machines, to fix metal or wood blocks that need to be polished. It is designed to be used with the wolverine grinding jig—the system for sharpening woodturning tools with a standard bench-style grinder.
Rank No. #9
Woodcut Tools Tru-Grind Turning Tool Sharpener System including a Jig to Sharpen all Woodturning Tools up to 1-1/2" with Two Base Slides for Lathe Woodturning Tools TRUGR 01
- COMPLETE SYSTEM GIVING EXACT BEVEL - Two base slides supplied allowing you to set up on each sharpening wheel. Jig designed to take mini tools right up to 1-1/2" in diameter tools. Unlike with other brands there is no need for several jigs and multiple accessories in your workshop. Fits most popular brands of 6" or 8" dry bench grinders such as Rikon or Jet.
- RESULTS IN A SMOOTH FINISH TO YOUR PROJECTS - The Tru Grind Sharpening System will enable you to turn wood to a finish so smooth that even the end grain requires no sanding. Exact bevels will not only give your projects a smooth finish but also give you safer, more predictable tools. You will find you are sharpening your tools less which in turn means both your wheels and tools will last longer.
- MOST PRECISE JIG AVAILABLE - The Tru Grind lathe tool sharpening jig has been thoughtfully designed and manufactured with a high quality design and finish. Unlike others in the market it locks into place producing precise, easy, sharpening. No mucking around to get the right sharpening angle each time therefore speeding up the process and saving tool length. Simply set the number on your lathe tool sharpening jig to repeat your preferred bevel every time.
- OUR MONEY BACK GUARANTEE - We consistently get feedback from customers who have found the quality and performance of our products have exceeded expectations, but in case you don't agree, we offer a no questions asked 30 Day Money Back Guarantee. Give our Tru-Grind Sharpening System a go today, absolutely risk free!
- USER GUIDES & VIDEOS SUPPLIED - An extensive user guide booklet is included in the box with your Tru-Grind Sharpening System, which includes two base slides and jig. User guide and demonstration videos available on our You Tube channel.
SaleRank No. #10
VEVOR Vari-Grind Jig, 3/4" Diameter of the Hole Vari-Grind Attachment, Fit for 0.63" Bowl Gouges Grinding Jig with Vari-Grind, Large Hole Vari-Grind Attachment for the Wolverine Sharpening System
- Protective Washers: The vari-grind jig is equipped with scratches resistance equipment. A plastic washer is added to the metal inside the support to fix the rod to avoid friction with the rod that needs to be processed and thus damage the machine and items.
- Widened Aperture: The aperture has been widened. The dimensions of the grinding jig are accurate. The diameter of the inlet and outlet holes is 0.7" / 18 mm, the distance between the inlet and outlet holes is 2.5" / 64 mm; suitable for the diameter of the gouges is 0.6" / 16 mm.
- Black Coating Surface: vari-grind attachment surface by spraying powder coating to the support surface with powder spraying equipment. Powder spraying is superior to spray paint in mechanical strength, adhesion, corrosion resistance, and aging resistance.
- Easy to Install: The vari-grind side grinding jig is integrated for effortless installation. We will provide a hexagonal handle that can be installed by hand. Put the rod that needs to be processed into the hole, tighten the screw to fix the rod, and you can operate it on the grinder.
- Wide Application: The lathe tool sharpening jig is widely used, mainly for grinding machines, to fix metal or wood blocks that need to be polished. It is designed to be used with the wolverine grinding jig—the system for sharpening woodturning tools with a standard bench-style grinder.
SaleRank No. #11
TOLESA Honing Guide Jig for Wood Chisel Edge Sharpening Holder, (Chisels 1/8" to 1-7/8”, Planer Blades 1-3/8” to 3-1/8”)
- 【Stable and Easy to Use】- TOLESA Chisel Honing Guide is well made and solidly constructed. Blades sharpening jig with sturdy clamping structure helps you hold firmly and maintain the correct angle during honing, effectively getting the perfect edge on your tools and chisels
- 【Excellent Compatibility】 - You can adjust the clamping width range of the sharpener guide by rotating the screw cap. This chisel sharpening jig is suitable for chisels & blades in widths from 1/8" to 1-7/8" and flat irons in widths from 1-3/8" to 3-1/8"
- 【Precise Angle Adjustment】 - You can obtain the desired edge angle by setting the protrusion distance of the blade. Chisel projection: 30mm for 30° and 40mm for 25° angles. Plane iron projection: 38mm for 30° and 50mm for 25° angles. We have included these wizards on the edge sharpening guide for your adjustment reference
- 【High Quality Metal】 - TOLESA Chisel Sharpener is made of stainless steel and cast aluminum with anti-rust coating, which is strong and durable. The ball bearing of eclipse honing guide slides smoothly and is not easy to wear on the sharpening stone and whetstone
- 【Multipurpose Tool】- Honing guide can be used for Wood Chisel, Planer, Blade, Graver, Graving Knife, Plane Iron, Flat Chisel, Edge Sharpening. And easily works on both oilstones and Waterstones
Rank No. #12
PSI Woodworking LCGRIND4 Complete 4-Piece Precision Lathe Chisel Sharpening System
- Includes: Adjustable 'V' Pocket Jig to hold chisels up to 22" in overall length
- Includes: Grinding Platform for general purpose grinding
- Includes: Finger Nail Jig - for finger nail profiles on shallow gouges, or deep fluted bowl gouges
- Includes: Skew Grinding Attachment to assist in grinding precision bevels on any skew chisel
- Bench Grinder not included; This sharpening system includes everything you need to grind perfect edges on wood lathe chisels; Simplifies the task of honing complex tool profiles; Duplicate angles, sharp edges, and smooth bevels
Rank No. #13
Honing Guide Jig for Wood Chisel Edge Sharpening Holder,Fixed Angle Knife Sharpener,Graver,Flat Chisel Hand Tool Silver
- Support chisel max clamping width to 55mm,Support plane iron max clamping width to 80mm
- When sharpening the knife,WANLAIN the blade edge is smoothly fitted to the oil stone, and the angle is easy to grasp, the center of gravity is stable, and it is not easy to slip.
- How to Use: Turn the screw cap counterclockwise, clamp your chisel or other knife tools, move up and down to adjust freely blade angle. Then tighten the screw cap clockwise, blade edge is smoothly fitted to the whetstone or sharpening stones, slide the knife back and forth until your tools becomes sharper and more precise.
- Brass pulley,Sliding back and forth during grinding is not limited, keeping the direction consistent, and the slip is smooth and safe.
- Multipurpose Tools: This Honing Guide can be used for Wood Chisel, Planer, Blade, Graver, Carving Knife, Plane Iron, Flat Chisel Edge Sharpening.Helping you to be a better handicraftsman.
SaleRank No. #15
CartLife Honing Guide Jig for Wood Chisel Edge Sharpening Holder,Fixed Angle Knife Sharpener,Clamping Planer Blade,Graver,Flat Chisel Hand Tool (Chisels 1/8" to 1-7/8”,Planer Blades 1-3/8")
- ✅【Sturdinless Constructure】The CartLife Honing Guide Jigs used a hardened carbon steel roller wheel which will not wear down over time or develop flat spots.The body of chisel sharpener is made from durable cast aluminum. Totally coated with anti-rust paint,not easy to rust,lasting and durable.
- ✅【Adjustable Clamping Width】Adjust the Clamping Width by Rotating the Screw-Cap.This sharpening guide will fit chisels from 1/8" to 1-7/8" in width, and plane irons from 1-3/8" to 3-1/8" in width. Includes flat jaws for clamping mortise chisels, and grooved jaws for clamping paring chisels and planer blades.
- ✅【Accurately Setting Angle】Sharpening angles can be accurated to set using CartLife's sharpening jig by adjusting the tool projection. If chisel projection 30mm for 30° and 40mm for 25° angles, planeiron projection 38mm for 30° and 50mm for 25° angles. More angles, kindly refer the instruction in the package.
- ✅【Easy to Use / Method】Honing Jigs seems simple to use, however maybe you are confused in the first time. So please kindly read the instruction step by step when you open the box, then get the perfect edge each time.
- ✅【Multipurpose Tools】The CartLife Honing Guide can be used for Wood Chisel,Planer,Blade,Graver,Graving Knife,Plane Iron,Flat Chisel,Edge Sharpening. And Easy-to-use works on both oilstones and waterstones.
Rank No. #16
Woodcut Tools Tru-Grind Tool Holder Turning Tool Sharpener Easy and Repeatable. Only Jig Needed for all Woodturning Gouges, Scrapers, Parting Tool, Skew Chisels, Carving, Carpenters, Lathe Tools HDR
- COMPATIBLE WITH MOST SHARPENING SYSTEMS - The Tru-Grind Tool Holder only, can be used in conjunction with most sharpening system bases on the market, including, but not limited to Woodcut Tools and Oneway.
- EXACT BEVEL EVERY TIME - Unlike other jigs on the market, the Tru-Grind jig securely locks into place to ensure the exact same angle every time. Simply set the number to repeat your preferred bevel time after time, giving you the confidence in knowing each of your tools are being sharpened correctly.
- SHARPEN ALL THE TOOLS IN YOUR TOOLBOX - No need for separate sized jigs, this tool holder head tilts to allow for a wide range of grinds, meaning its the only sharpening jig you will need. Designed to take up to 1-1/2" in diameter tools, including Bowl and Spindle gouges, Parting Tool, Skew chisel and Spindle Roughing Gouge, there is no need for several jigs in your workshop.
- OUR MONEY BACK GUARANTEE - We consistently get feedback from customers who have found the quality and performance of our products have exceeded expectations, but in case you don't agree, we offer a no questions asked 30 Day Money Back Guarantee. Give our Tru-Grind Jig a go today, absolutely risk free!
Rank No. #17
Bench Grinder Replacement Sharpening Tool Rest Jig for 6” and 8” Grinders and Sanders BG
- Will work with both 6” and 8” diameter grinders and belt sanders with 1” wide wheel or belt
- Mounts directly to bench and can be quickly removed to allow free hand grinding
- Tool rest comes with a grinding jig that will accept blades/chisels up to 2.5 inches wide
- Can easily move forward/back, up/down and rotate
- Constructed from anodized aluminum and will never rust.
Rank No. #18
Pro Grind Multi-Grind Sharpening Jig with Setup Blocks for Multiple Tool Grinds and For Use with Sharpening Systems that Use Pocket V-Arm Attachments
- One of the more challenging angles or grinds to achieve on our turning tools is getting the grind correct on a bowl gouge or spindle gouge. We have developed the Multi-Grind Jig with setup blocks to eliminate the guess work so you can focus on making the perfect bowl gouge or spindle gouge grind every time! Using this jig with any system that has a pocket v-arm attachment (not included) will make your bowl/spindle gouge sharpening experience much smoother than ever before!
- Typically there are 4 basic grind types (3 types of bowl gouges and 1 type for spindle gouges). The 4 basic grind types are standard, short and long for bowl gouges and fingernail grind for spindle gouges. These grinds are all simple to achieve using the Multi-Grind Jig and we show you how to do them in the included instructions
- With this jig and included setup blocks, you’ll be able to quickly and accurately set your tool grind projection, the correct tool angle (depending on desired grind you choose) and the proper pocket v-arm depth. Having these three variables simplified makes your setup process so much easier!
- Once your setup, the Multi-Grind Jig with your tool mounted makes grinding the round shape of bowl gouge very easy and very smooth when compared to free hand grinding. The natural pivoting, rolling action in provides allows you to not achieve the perfect grind, but keeps your fingers away from the wheel at the same time.
- The Multi-Grind is made from high quality steel. The knob is made from brass and the threads provide a smooth rotating action when the brass knob is turned. The clamp pad is covered with a non-marring PVC material to help protect your tool while grinding. The clamp opening has a v-shape base that accepts your turning tool perfectly and won’t allow your tool to accidentally roll or shift while grinding.
Rank No. #19
Adjustable Replacement Tool Rest Sharpening Jig for 6 inch or 8 inch Bench Grinders and Sanders • Includes a Pivoting Miter Slide and Flat Miter Slide for Easy Tool Honing
- The Adjustable Replacement Tool Rest Sharpening Jig will allow you to locate all the basic sharpening positions with your bench grinder (grinder not included). The unique miter slide tool holder design allows the jig to be used more or less as a stone, which easily guides your blades, turning tools and chisels. Solid aluminum construction provides you with a smooth sliding, side to side action when sharpening.
- The sharpening jig works with most power or hand grinders that has or had a tool rest. It is the ideal replacement for the factory tool rest that comes with many bench grinders. The jig offers much more flexibility in terms of what you can get done than with the standard factory tool rest. The plate is offset for short chisels, such as Japanese or western butt chisels.
- The Sharpening jig can be used with 6" or 8" bench grinders and on many belt sanders/grinders. It quickly and easily mounts directly to the bench in front of the grinder with a track style base and can be readily folded out of the way for freehand grinding if so desired. It can also be completely removed by loosening the large wing knob and sliding the jig from the track base.
- Another great feature is that the jig can be adjusted forward and backward for just the right angle. Some aftermarket and expensive tool rests don’t move and adjust in this fashion. This can be very limiting your ability to be accurate with your angles. The platform straddles wheels up to 1" wide. The Jig also now includes internal lock washer for even more stability!
- The unique ratcheting handles lock the adjustable rest solidly in position and can be moved out of the way after locking to keep from accidentally bumping them. You can easily move the tool rest from one grinder wheel to another or quickly remove it from the bench when not needed for grinding. Some assembly required. The bench top wood mounting screws are included.
Rank No. #20
Wolverine Vari-Grind Attachment
- create a side grind on your bowl gouges
- create a fingernail grind on your spindle gouges
- quick and easy to use
- black coating to protect from rusting
- designed to be used with the Wolverine Grinding Jig
Last update on 2023-08-03 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Lathe Tool Sharpening Jig?
Do you get stressed out thinking about shopping for a great Lathe Tool Sharpening Jig? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Lathe Tool Sharpening Jig, which is why we have assembled a comprehensive list of the greatest Lathe Tool Sharpening Jig available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Lathe Tool Sharpening Jig that you consider buying. Your questions might include the following:
- Is it worth buying an Lathe Tool Sharpening Jig?
- What benefits are there with buying an Lathe Tool Sharpening Jig?
- What factors deserve consideration when shopping for an effective Lathe Tool Sharpening Jig?
- Why is it crucial to invest in any Lathe Tool Sharpening Jig, much less the best one?
- Which Lathe Tool Sharpening Jig are good in the current market?
- Where can you find information like this about Lathe Tool Sharpening Jig?
We’re convinced that you likely have far more questions than just these regarding Lathe Tool Sharpening Jig, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Lathe Tool Sharpening Jig, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Lathe Tool Sharpening Jig. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Lathe Tool Sharpening Jig buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Lathe Tool Sharpening Jig currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Lathe Tool Sharpening Jig has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Lathe Tool Sharpening Jig?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Lathe Tool Sharpening Jig.
- Customer Ratings: Number ratings grade Lathe Tool Sharpening Jig objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Lathe Tool Sharpening Jig.
- Product Quality: You don’t always get what you pay for with an Lathe Tool Sharpening Jig, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Lathe Tool Sharpening Jig is should be an indication of how long it will work out for you.
We always remember that maintaining Lathe Tool Sharpening Jig information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Lathe Tool Sharpening Jig is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.