Skip to content

20 Best Lexus Rx300 Brake Light Module of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best Lexus Rx300 Brake Light Module of 2023. Check our ranking below.

2,014 Reviews Scanned

Rank No. #1
iBrightstar 9-30V Flashing Strobe Blinking Controller Flasher Module for LED Brake Tail Stop Light High Mount/3rd Brake Lights - 2Pack
  • This small block controller can enhance your brake light function with 4 times fast-blinking and 4 times slow-blinking and then turn stable solid light. Improve traffic safety warning, to avoid rear-end accident.
  • Working Voltage: 9-30V, will suitable for all motor vehicles, cars motorcycle tank armored vehicles electric bicycle and other LED Lighting Accessories Bulbs.
  • Complete sealed technology make it waterproof, short circuit prection.
  • Easy to install. There are input and output, Black wire for Negative Pole, Red wire for Positive Pole. High quality and strictly controlled system for durable and highly performed use.
  • Buy with confidence, any other problem please feel free to contact us, we are always here to satisfy of you.
Rank No. #2
Pacer Performance 20-702 Black Logic Circuit
  • Package Dimensions: 9 L x 3 H x 8 W (inches)
  • Package Weight : 0.75 pounds
  • Country of Origin : China
  • Part number: 20-702
Rank No. #3
Alla Lighting Upgraded T20 7440 7443 LED Strobe Brake Lights Bulbs, Red Flashing Stop Lamps, W21W 7440LL 7443LL Strobe LED Taillights Replacement for Cars, Trucks, SUVs, Vans
  • (Set of 2) Newly upgraded version, built-in USA-made smart IC driver for the best light performance and longer lifespan, 7443 Strobe led lights bulbs flash 3 times on-and-off and then keep solid light (Legal blinking times) to avoidthe rear-end collision for automotive cars, trucks, SUVs, RVs.
  • LED Chips: Each 7443 LED strobe bulb is equipped with 39 pieces high quality,high power and high performance 2835 led chips; 360° full angle illumination light ouput with projector lens.
  • Universal fits T20 wedge 7440 single filament and 7443 dual filament W3x16Q base, big difference between high and low intensity light output, replacing rear 7440 7443 brake stop light, back-up reverse lights, center high-mount stop ( 3rd brake ) lights lamps,etc. Extra load resistors maybe required to avoid the error code or blinking issue.
  • The length is about 2.09 inch. Cross reference number: 7440, 7441, 7443, 7443LL, W21/5W, 7443/26201, 78660, 78661, 17919, 7515, HIB7443WM, W21W, 7440/26200, 17632, 7504, 7440LL, 7443-SRCK, 7443-CK,etc.
  • One Year Warranty Compatible with both standard type and CK/SRCK type. Voltage: 12V - 24V, built-in stable current IC driver for longer lifespan.
Rank No. #4
iJDMTOY (1 12V GS-100A LED Brake Stop Light Strobe Flash Module Controller Box Compatible With Car Truck Third or High Mount Brake Light Retrofit
  • Miniature size and waterproof design (IP65) with easy to install diagram on the module box
  • Improve safety, can better alert the vehicles behind you to prevent rear-end collision
  • Compatible with all types of brake lamps including LED clusters, such as cars, motorcycles, tanks, armored vehicles, electric bicycles and other LED lights
  • Flashing/warning pattern: flash three times fast, then three times slow and stay lit constantly
Rank No. #5
FANTELI 912 921 LED Bulb, Strobe Flashing 3rd Third Brake Center High Mount Stop Light, 300% Brighter Non-Polarity T15 906 904 902 W16W Brilliant Red
  • STROBE FLASHING DESIGN - The T15 W16W 906 904 912 921 LED bulb will strobe 3 times (legal blinking times) before turning stable to offer you a more noticeable and safer stop.
  • HIGH POWER & 300% BRIGHTER - Each T15 W16W 906 904 912 921 LED bulb has 21pcs 2835-SMD LEDs which make it 3 times brighter than traditional halogen bulbs. 360° full-angle light will make your car more noticeable while braking.
  • NON-POL ARITY & EASY INSTALLATION - There is no need to worry about polarity direction nor fuse blowout, just simply plug and play and the installation will be finished within just 10 minutes.
  • ADVANTAGES Vs HALOGEN BULBS - The built-in intelligent IC driver of these brake lights can bring you a more energy-saving (from 16w to 4.5w), lower temperature (from 1000°F to 150°F), and longer life span (from 1000h to 30000h) performance without any UV/IR radiation.
  • PACKAGE INCLUDED - (Pack of 2) T15 W16W 906 904 912 921 LED bulb third brake lights Strobe Flashing replacements, 4.5W per bulb, 1100lm per bulb, 9-30V Wide voltage, 375Ma current, bulb size: 1.57in(L)*0.59in(W)+0.39in(H) net weight: 6g/pcs
Rank No. #6
SYLVANIA - 7443 Long Life Miniature - Bulb, Ideal for Daytime Running Lights (DRL) and Back-Up/Reverse Lights (Contains 2 Bulbs)
  • LIGHTS DIM OVER TIME, REPLACE IN PAIRS: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind.
  • EASY TO REPLACE: Sylvania Long Life miniature bulbs are easy to install and show instant results.
  • LOW MAINTENANCE AND HIGH DURABILITY: Designed for durability, greater safety, and lower maintenance by the leading supplier of automotive lighting.
  • LONGER LIFE THAN MOST STANDARD BULBS: Long Life bulbs perform twice as long as any other standard miniature bulbs.
  • THE SYLVANIA STANDARD OF QUALITY: With 100+ years in business, Sylvania is the world leader in automotive lighting for Original Equipment Manufacturers (OEMs) and the aftermarket.
Rank No. #7
Brake Light Flasher Strobe Brake Light Strobe Tail Light Strobe Brake Flasher LED Flash Module Flash Strobe Controller for Motorcycles Cars Trucks Brake Light Tail Stop Light 12-30 V (4 Pieces)
  • What you can receive: there are 4 pieces of flash strobe controllers and 4 pieces of double sided adhesive tapes in the package, which can alert the vehicles behind you to stop to avoid rear-end accidents when driving blocked roads; Sending them to your friends and family members is also a good option
  • 2 Flash speeds: when braking, this brake light flash module can first fast-blink 4 times and then slow-blink 4 times, and finally stay in the original steady light when flashing is completed, which can warn your following drivers when you stop with a catchy blinking light
  • Serviceable material: the car flasher modules are made of quality ABS material, sturdy and reliable to use, not easy to wear or tear, can be kept and applied for a long time; They also adopt complete sealed technology, which can protect modules from water and avoid short circuit, giving you a satisfactory using experience
  • Simple installation: the flash module measures about 4.8 x 2.7 x 1.4 cm/ 1.89 x 1.06 x 0.55 inches, 15 cm/ 5.9 inches in wire length, and comes with double sided adhesive tapes for easy installation; You only need to connect red wire to positive pole, and black wire to negative pole, very easy and convenient, and it's suggested to install it in the third brake light
  • Wide Range of Applications: these car brake light flashers can enhance your brake light function, are necessary assistants in your daily life, can be widely applied to all types of cars' brake lights with 12 to 30 V, such as cars, trucks, motorcycles and more
Rank No. #8
AOCISKA 2 PCS Flash Strobe Controller, 12-30 V Brake Light Flasher Brake Light Strobe Tail Light Strobes Brake Flasher Module,Brake Stop Light Strobe Flash Module Controller Box
  • [High Quality Material] The flash controller is made of high quality material, which is environmentally safe, waterproof and durable.
  • [Specification] The size of the flash module is about 1.89 x 1.06 x 0.55 inches, the wire length is 5.9 inches, and the working voltage is 12V-30V.
  • [Two Modes] The small block controller enhances the brake light function through two modes when braking: 1. Flash fast for 4 times, 2. Slowly flash for 4 times. After flashing, keep the original stable light, which will warn your subsequent driver with striking flashing light.
  • [Easy to Install] The LED brake light is easy to install. You only need to connect the red wire to the positive pole and the black wire to the negative pole, which is very simple and convenient.
  • [Widely Applicable] These car brake light flashers can enhance the function of your brake light and are necessary assistants in your daily life. They can be widely used in all types of 12 to 30 V car brake lights, such as cars, trucks, motorcycles, electric bicycles, etc
SaleRank No. #9
FXC 2x 24W Flash Strobe Controller Flasher Module for LED Brake Light Tail Stop Light 12-30V
  • Improve traffic safety warning, to avoid rear-end accident. When driving clogged at night, continued brakes produce visual fatigue,FXC flasher can solve this shortcoming very well.
  • This small block controller enhance your brake light function with fast-blinking 4 times ,slow-blinking 4 times, When flashing is completed, stay in the original steady light, This warns your following drivers with a catchy blinking light.
  • Wide boltage 12V - 24V DC , suitable for all motor vehicles, cars motorcycle tank armored vehicles electric bicycle and other LED lights, the best installed in the third brake lights.
  • Complete sealed technology make it waterproof, short circuit prection.
  • Easy to install and durable.With our strict quality control system, we test each item and 100% ensure in good condition before we ship.Enjoy 1 year quality warranty under regular use. Offering customer technical service, feel free contact us for technical, installation and use question.
Rank No. #10
Moioee Car Flash Strobe Controller, 2PCS 12-30V LED Brake Light Flasher Module, ABS Auto Flash Module Flash Strobe Controller for Motorcycles Trucks Tail Stop Light (White)
  • 【Increase Driving Safety】: Every time you brake, this brake light flash module can flash quickly for 4 times, then flash slowly for 4 times, and finally keep the original constant light after the flashing is completed. It alerts the vehicles behind you, improves traffic warning effectiveness, avoids accidents, and increases driving safety.
  • 【High Quality&Waterproof】: The automotive flash module is made of high-quality ABS material, which is robust and reliable to use, not easy to wear, and can be stored and applied for a long time. In addition, it also has waterproof and dustproof functions, which can protect the module from water and avoid short circuits, providing you with satisfactory experience.
  • 【Simple Installation】: Double-sided adhesive is attached to the rear of the brake light strobe for easy installation and durability. The upgraded taillight controller has a better effect. Plug and play. You just need to connect the red wire to the positive pole and the black wire to the negative pole, it is very simple and convenient, it is recommended to install it in the third brake light.
  • 【Wide Range of Applications】: These car brake light flashing lights can enhance your brake light function, can be widely used in 12 to 30 V all kinds of car brake lights, such as cars, trucks, motorcycles, electric bicycles, etc., is an indispensable assistant in your daily life. With this product your family will not have to worry about your driving safety anymore.
  • 【Worry-Free Service】: We are committed to providing quality products and excellent after-sales service. If you have any questions or concerns, please let us know. Our professional and reliable customer service will try our best to provide you with a suitable solution. Please buy with confidence. Wish you a happy life everyday.
Rank No. #11
Vehicle Brake Light Flasher Module. Safety Flash Light Alert. Universal. For Motorcycles and Cars. Model X1. Timeout lock.
  • BRAKE LIGHT BLINKER - Multi mode brake flasher device. Avoid rear end collisions.
  • MULTIPLE MODES - 1 to 16 flashes. Fast or slow rates. Patented Timeout lock.
  • EASY TO INSTALL - Connects to existing third brake light. 5 min install. 3 wires to connect.
  • SAFETY FIRST - Install one today and prevent rear end collision tomorrow. Waterproof.
  • MADE IN USA - Made in the United States.
Rank No. #12
PGONE Red LED Rear Bumper Reflectors Fog Brake Tail Light sequential turn signal Lamps Accessories Kit For Toyota Rav4 Camry Sienna Matrix Venza Avalon Lexus RC250 RC350 IS-F GX470 RX300
  • ▶1.FITMENTS:Designed for Toyota RAV4 2019,Camry 06-14,Reiz 07-15, Toyota Avalon 2013 and up, Toyota Venza 2009 and up, Toyota Matrix 2009-2012, Toyota Sienna Base LE XLE only 2011 and up(Not Fit Sienna 2021); Lexus 2015 and up Lexus RC250 RC350, 2008 and up Lexus IS-F, 2003-2009 Lexus GX470, 1999-2003 Lexus RX300
  • ▶2.Easy to installation: Replaces the OEM rear bumper bulb-less reflectors with LED as add-on brake light/tail light and turn signal light.
  • ▶3. Please note there are some wiring required, simply route the LED bumper reflector's wires to the vehicle tail lamp and tap them to the ground/tail light/brake light accordingly (see picture for detailed fitment info)
  • ▶4.Exact fit and direct replacement, Super bright LEDS have a faster on/off response time for driving safety & Perfect design enhances your car's exterior look.
  • ▶5. After-sales:Waterproof IP65, shockproof, dustproof, 50000+ hours life-span, ONE YEAR WARRANTY.
Rank No. #13
Xotic Tech 1 x Strobe Flash Module Controller Box Flasher Module for Car Trunk 3rd Brake Light High Mount Stop Lamp, GS-100A 12V
  • 1 piece of -100A LED flash strobe controller module.(The packaging box shown is for illustration purposes only, actual packaging may vary)
  • Universal fit for any cars, bike, motorcycle, etc.
  • Alert vehicles behind you to prevent accident
  • Module size: 1.95" x 1.05" x 0.55"
  • Wiring length: approx 5" each side
Rank No. #14
81107-2D020 KDLT002 DDLT002 HID Headlight Ballast Control Unit Module for Toyota Lexus Lincoln MOTOALL
  • Package includes: 1pc Xenon Headlight Ballast with Ignitor as pictured (Light Source: D2R D2S; Input Voltage: DC 12V; Output Voltage: AC 85V; Output Power: 35W; Max Voltage at startup: 25000V; Lifetime expectancy: 2000H; Fits left or right headlight; Size: 125mm (L) x 80mm (W); Thickness: 20mm; Bulb Cord Length: 280mm; Bulb Socket Depth: 27mm)
  • Replace#: Toyota Denso 81107-2D020 81107-48180 81107-48190 81107-48210 81107-51050 81107-53040 85967-08010 85967-41010 85967-50020 85967-53020 85967-0E020 85967-33010 81107-28560 81107-3A540 85967-05010 85967-28010 85967-30050 031100-0092 031100-0200 2C54-13C170-AA YWC 500060 GS1G-51-0H3 997.631.28301 997.631.18300 9976311 031100-0170 39000-16338 39000-20751 39000-77065 39000-76943 GX-KD2; Denso/Koito DDLT002 KDLT002
  • Replace#: Toyota Denso 811072D020 8110748180 8110748190 8110748210 8110751050 8110753040 8596708010 8596741010 8596750020 8596753020 859670E020 8596733010 8110728560 811073A540 8596705010 8596728010 8596730050 031100-0092 0311000200 2C5413C170AA YWC500060 GS1G510H3 99763128301 99763118300 9976311 0311000170 3900016338 3900020751 3900077065 3900076943 GXKD2; Denso/Koito DDLT002 KDLT002
  • Fits Lexus: 2000-2003 ES300, 2004-2006 ES330, 2007-2009 ES300 ES350 ES450, 1998-2005 GS300 GS400, 2001-2005 GS430, 2006-2009 GS300 GS350 GS450/H GS460, 2006-2009 IS250 IS350 IS350F, 2001-2005 IS300, 1998-2006 LS400, 2001-2006 LS430, 2007-2009 LS460, 2001-2009 RX300 RX330 RX350 RX400h, 2002-2009 SC430;
  • Fits Toyota: 2005-2007 Avalon, 2003-2005 Celica, 2004-2006 Prius, 2004-2010 Sienna, 2007-2012 Mazda 6, 2004-2008 RX-8; Lincoln: 2003-2005 Aviator, 2003-2006 LS; Porsche:2005-2013 Boxster / Cayman, 2006-2011 911 / Carrera (997); 2004-2009 Land Rover Discovery LR3
Rank No. #15
iBrightstar Newest 9-30V Super Bright Low Power 7443 7440 T20 LED Bulbs with Projector Replacement for Tail Brake Lights Turn signal Lights, Brilliant Red
  • (Set of 2 Bulbs) 54SMD 3014 & 3SMD 3030 high Brightness chips per bulb, Working Voltage: 9v-30v
  • Fits: 7440A 7440NA 7440 7440SV 7443NA 7441 7443 7443R 7444 992 WY21W W21/5W W21W etc. Easy installation, plug and play.
  • Application: Brake Lights, Tail Lights, Stop Lights, Daytime Running Lights, Fog Lights etc. Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights.
  • Advantage: Compatible for both CK/SRCK and Standard socket, non-polarity design. 300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution, built in Constant Current IC for Longer life span & Low Power Consumption.
  • Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
Rank No. #16
Signal Dynamics Back Off XP/Brake Light Signal Module
  • Compact; solid-state electronic module converts brake lights into 2 choices of visual alerting signals when brakes are applied
  • Mode one emits 3 short flashes followed by one long flash (3.5 seconds); Repeats as long as brakes are applied
  • Mode 2 emits 5 short flashes followed by a steady on light; light remains on until brakes are released
  • Specifications: 12V DC, max. capacity 10A, sealed weather-resistant heat sink case, 2 1/4in. L x 5/8in. H x 1 5/8in. W
SaleRank No. #17
iBrightstar Newest 9-30V Flashing Strobe Blinking Brake Lights 7440 7443 T20 LED Bulbs with Projector Replacement for Tail Brake Stop Lights, Brilliant Red
  • (Set of 2 Bulbs) 54SMD 3014 & 3SMD 3030 high Brightness chips per bulb, Working Voltage: 9v-30v
  • Fits: 7440A 7440NA 7440 7440SV 7443NA 7441 7443 7443R 7444 992 WY21W W21/5W W21W etc. Easy installation, plug and play.
  • Application: Flashing Strobe Blinking brake LED light bulbs will fast flashes 3 times at the beginning braking mode for much easier notified and safer stop & then turn stable solid brake light (Legal blinking times) to avoid any automotive cars, trucks, SUVs, RVs rear-end collision.
  • Advantage: Non-polarity design, 300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output, aircraft grade aluminum heat sink with Low temperature, built in Constant Current IC for Longer life span & Low Power Consumption.
  • Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
Rank No. #18
iJDMTOY 12V 48W High Capacity Strobe Flashing Wiring Module Boxes Compatible with Replacement Bulbs, LED Strips, Tail/Brake Lights, Fog Lamps, etc
  • 2 pieces light strobe flashing enable module wires
  • Input 12V, output 12V, up to 4W output (aka 48W high capacity)
  • Module wire length: 30 inches
  • Tap red/black wires to +/- and third white wire for triggering the flashing/strobe feature
  • Good for tail lights, brake lights, fog lights, LED DRLs, LED strips and more
Rank No. #19
iBrightstar Newest 9-30V Flashing Strobe Blinking Brake Lights 7440 7443 T20 LED Bulbs Replacement for Tail Brake Stop Lights, Brilliant Red
  • (Set of 2 Bulbs) 66SMD 3014 high Brightness chips per bulb, Working Voltage: 9v-30v
  • Fits: 7440A 7440NA 7440 7440SV 7443NA 7441 7443 7443R 7444 992 WY21W W21/5W W21W etc. Easy installation, plug and play.
  • Application: Flashing Strobe Blinking brake LED light bulbs will fast flashes 3 times at the beginning braking mode for much easier notified and safer stop & then turn stable solid brake light (Legal blinking times) to avoid any automotive cars, trucks, SUVs, RVs rear-end collision.
  • Advantage: Non-polarity design, 300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output, aircraft grade aluminum heat sink with Low temperature, built in Constant Current IC for Longer life span & Low Power Consumption.
  • Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
Rank No. #20
Podoy GS-100A Flash Strobe Controller Flasher Module for LED Brake Tail Stop Light 12V-24V
  • Rated power:10W to 15W,Type: Flash Strobe Controller Material: Plastic Quantity: 2pcs Item Color: Black Input: DC6V-30V Output: DC6V-30V Item Size: 5*2.7*1.3cm / 2*1.1*0.5 in (L*W*H)
  • Features: When braking first fast-blinking 4 times and then slow-blinking 4 times, finally stay in the original steady light, which warms the drivers behind you when you stop with blinking light. Alert the vehicles behind you to stop to prevent rear-end accident when driving blocked road. Wide voltage 6-30V, suitable for all types of cars' brake lights with 6V~30V, it also fits for trucks, motorcycles, electric bicycles, tanks and other LED lights.
  • Input: red wire for positive, black wire for negative; Output: red wire for positive, black wire for negative. Made of eco-friendly and durable material. Double side tape is included for easier install. Complete sealed technology make it waterproof, short circuit protection. Mini and compact design, easy to install and space-saving.
  • Cable length:Approx. 15cm,Package includes: 1pc GS-100A

Last update on 2023-07-29 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Lexus Rx300 Brake Light Module?

Do you get stressed out thinking about shopping for a great Lexus Rx300 Brake Light Module? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Lexus Rx300 Brake Light Module, which is why we have assembled a comprehensive list of the greatest Lexus Rx300 Brake Light Module available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Lexus Rx300 Brake Light Module that you consider buying. Your questions might include the following:

  • Is it worth buying an Lexus Rx300 Brake Light Module?
  • What benefits are there with buying an Lexus Rx300 Brake Light Module?
  • What factors deserve consideration when shopping for an effective Lexus Rx300 Brake Light Module?
  • Why is it crucial to invest in any Lexus Rx300 Brake Light Module, much less the best one?
  • Which Lexus Rx300 Brake Light Module are good in the current market?
  • Where can you find information like this about Lexus Rx300 Brake Light Module?

We’re convinced that you likely have far more questions than just these regarding Lexus Rx300 Brake Light Module, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Lexus Rx300 Brake Light Module, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Lexus Rx300 Brake Light Module. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Lexus Rx300 Brake Light Module buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Lexus Rx300 Brake Light Module currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Lexus Rx300 Brake Light Module has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Lexus Rx300 Brake Light Module?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Lexus Rx300 Brake Light Module.
  5. Customer Ratings: Number ratings grade Lexus Rx300 Brake Light Module objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Lexus Rx300 Brake Light Module.
  7. Product Quality: You don’t always get what you pay for with an Lexus Rx300 Brake Light Module, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Lexus Rx300 Brake Light Module is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Lexus Rx300 Brake Light Module information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Lexus Rx300 Brake Light Module is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: