Skip to content

Contents

20 Best Lly Duramax Water Pump Replacement Cost of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best Lly Duramax Water Pump Replacement Cost of 2023. Check our ranking below.

2,291 Reviews Scanned

SaleRank No. #1
Gates 42349BH Premium Engine Water Pump
  • Quality-assured with 100 percent leakage and functional tests of seals, bearings, castings and fully assembled water pump
  • Fits and performs exactly to OE specifications and requirements
  • Premium water pumps are designed to enhance the performance of the equivalent standard pump
  • Backed by a limited lifetime warranty
SaleRank No. #2
Lisle 22100 Flywheel Locking Tool for 6.6L Duramax
  • Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions
  • Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement
  • Use 36mm 12-point socket with 3/4 square drive to remove harmonic balancer bolt and retorque on installation
  • Package dimension is 4.5 inches width by 5 inches height by 2 inches depth
Rank No. #3
DuroMax XP652WP 208cc 158-Gpm 3600-Rpm 2-Inch Gasoline Engine Portable Water Pump, 50 State Approved, XP652WP, Blue
  • 1 Gallon Gas Tank/2.4 Hour Run Time
  • Back Flow Check Valve. Maximum overhead lift: 92- feet
  • Includes intake hose end strainer, threaded hose end connectors, hose clamps, and tool kit with plug wrench
  • Automatic Low Oil Shut Off.Maximum Flow Rate:158 GPM
  • EPA Approved. Ease Of Use: Anyone can use it - EZ-Pull Recoil Start System allows for simple startup without multiple pulls
Rank No. #4
Bolaxin Flywheel Locking Tool with 36mm 3/4 Inchs Wench for 6.6L Duramax Engine
  • Work on Duramax 2500 / 3500 pickups .Remove metal spring-loaded inspection plate on the bottom of the transmission. Tool should slide into opening toward engine with the top of the tool engaging the teeth of the flywheel.
  • Locking the flywheel at the transmission instead of having to remove the starter for water pump replacement.
  • Toothed pieces with screws---Remove the rubber inspection cap on the bottom of the transmission.Insert the tool at the front of the opening to engage the flywheel and hand tighten bolt to hold tool in place.
  • Forged 36mm socket---Use on the balancer bolt.Use with a 3/4" square drive wrench
  • Quality tool ---Made of CRV steel with durability, flywheel locking tool is anti-rust and corrosion-resistant
Rank No. #5
GM ACDelco D807C Instrument Panel Dimmer Switch
  • GM-recommended replacement part for your GM vehicle’s original factory water in fuel sensor
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
SaleRank No. #6
Premium Modular Coolant Hose
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation – the leading cause of hose failure
  • EPDM tube; synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
  • Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
  • Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
SaleRank No. #7
Caterpillar 1R-0750 Advanced Efficiency Diesel Engine Fuel Filter
  • Genuine Caterpillar filter made in USA or Czech Republic
  • Thread size (inch): 1-14-2B
  • Height: 181.5mm
  • Diameter: 85.7mm
  • Advanced efficiency 2 micron absolute cellulose media filter
Rank No. #8
GM Genuine Parts TP3018 Fuel Filter with Seals
  • Help Prevent Dirt, Rust, And Other Fuel Contaminants From Entering The Fuel Delivery System
  • Some Gm Genuine Parts May Have Formerly Appeared As Acdelco Gm Original Equipment (Oe), Inlet Type:Threaded
  • Gm Genuine Parts Are Designed, Engineered And Tested To Rigorous Standards, And Are Backed By General Motors
  • Gm Engineers Design And Validate Oe Parts Specifically For Your Chevrolet, Buick, Gmc, Or Cadillac Vehicle
Rank No. #9
iFJF TP3018 Fuel Filter Replacement for Duramax 6.6L Chevy Silverado/GMC Sierra 2500HD 2001-2016 3500HD 2007-2016 Express/Savana 2500 3500 4500 2012-2016 Diesel Engine TP3012 12664429
  • Fitment:Fuel Filter for Duramax 6.6L 2001-2016 Chevy Silverado/GMC Sierra 2500 HD Engine and more.
  • Replaces part number:TP3018,TP3012,19305685,12664429,12633243,33960XE,LFF6012,BF46062,P550517,FF5501,F55464,PS9059B.
  • Element:Multi Layer Filter Media Design,Outer filter element 15 micron.Inner filter element 5 micron.Water separation efficiency 98%.
  • Feature:Protects your vehicle's fuel system from particles such as dirt, rust, and paint particles before they enter the fuel delivery system to improve engine's performance.
  • Note:Please replace the fuel filter regularly and don’t reuse old ones.
Rank No. #10
Dorman 800-409HP Coolant Connector - Inlet/Outlet 3/4In. Tube x 5/8In. Hose Compatible with Select Models (OE FIX), Stainless Steel
  • Improved design - this HVAC heater hose connector has been redesigned for greater durability the original equipment part
  • Durable construction - this heater hose connector is made of stainless steel instead of the original equipment connector to reduce damage from heat fatigue and vibration
  • Easy to install - matches the original equipment form and dimensions for a simple replacement
  • Quality tested - this part has undergone try-on, corrosion, heat and pressure testing to ensure a quality fit and long service life
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
Rank No. #11
Dorman 955-1408 Driver Side Door Mirror Compatible with Select Nissan Models
  • Perfect replacement - reverse engineered to look, fit and function exactly like the original door mirror on your vehicle's specific year, make and model
  • Complete assembly - includes same mirror glass, housing, bracket and technology as the original part that came on the vehicle
  • Cost-effective and reliable - functions similarly to the original part but is much less expensive than getting a replacement from the dealership or original manufacturer
  • Easy installation - no special tools or equipment is necessary for installing this new part
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
SaleRank No. #12
Gates 23260 Premium Modular Coolant Hose
  • Specifically-engineered materials resist collapse under vacuum
  • Engineered to resist electrochemical degradation – the leading cause of hose failure
  • EPDM tube; synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
  • Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
  • Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
SaleRank No. #13
GOOACC 635Pcs Car Push Retainer Clips & Auto Fasteners Assortment -16 Most Popular Sizes Nylon Bumper Fender Rivets with 10 Cable Ties and Fasteners Remover for Toyota GM Ford Honda Acura Chrysler
  • 【UNIVERSAL FIT KIT】- The kit contains 16 types of most common sizes of fastener clips, suitable for the OEM replacement in 6-10mm hole sizes,that you’ll always have the right size.
  • 【TOP QUALITY】- These car retainer clips are made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use.
  • 【PREFECT FOR WHAT YOU NEED】 - Up to 620 pieces of retainer clips in a plastic box, allows to freely DIY your vehicle accessories at anytime you wanted. It is definitely cheaper than going to the auto parts store.
  • 【BONUS ACCESSORIES】- We provide different size fastener removers and cable ties to help you quickly and easily remove car door panel and upholstery clips without causing damage to them. Easy access into confined areas.
  • 【WIDE APPLICATION】- Professional push clips are widely used for car panel, door trim, bumper and fender for GM Ford Toyota Honda Chrysler etc.
Rank No. #14
Lisle 57030 Standard Oil Filter Swivel Wrench
  • 3.5 - 3.875 (88.9 - 98.4mm) Range. Fits most popular 3.625" standard filters.
  • Tough, stainless steel band with permanently bonded textured coating for superior gripping power...won't slip.
  • Swivel handle makes it easy to turn in tight spots. Handle swivels more than 180° with adjustable tension.
  • Tension adjusting nut allows swivel pressure to be regulated...no more floppy filter wrenches.
  • Coating process adds many additional gripping points to securely grab the filter.
Rank No. #15
Kurala 680 PCS Car Push Retainer Clips Assortment 16 Most Popular Sizes Nylon Bumper Push Fasteners Rivet Clips Replacement Kit
  • Kurala car retainer clips replacement kit contains 16 types of most common sizes of fastener clips, cover 5mm to 10mm hole sizes.
  • Retainer clips are made of high-quality black nylon material, anti-wear and anti-corrosion, no break or crack easily during use.
  • Professional car push retainer clips are widely used for door trim, car fender, bumper, side skirt, radiator shield, splash shield retainers for Ford, GM, Chrysler, Toyota, Honda and more.
  • Kurala push bumper retainer kit comes with a plastic box with 15 compartments for organized storage. Compact size, light weight, convenient to store or carry with in your car.
  • Package includes: 680 PCS auto car body retainer clips. 20 PCS plastic cable ties. 5 PCS durable fastener removal tools.
SaleRank No. #16
Gates 90K-38274B Complete Serpentine Belt Drive Component Kit
  • Save money and prevent premature vehicle breakdowns by making the choice to fix your vehicle right the first time
  • Neglecting to replace the tensioner and pulley(s), at the same time you replace the belt, can not only shorten the life of the belt as well as other front end accessory drive components, but can leave you or your customer stranded on the side of the road
  • Gates understands the importance of getting your vehicle up and running with as little hassle as possible
  • Our Complete Serpentine Kits provide customers a time-saving, convenient way to purchase all the premium parts needed, in one pre-packaged kit, to completely restore their serpentine belt drive system

Last update on 2023-08-11 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Lly Duramax Water Pump Replacement Cost?

Do you get stressed out thinking about shopping for a great Lly Duramax Water Pump Replacement Cost? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Lly Duramax Water Pump Replacement Cost, which is why we have assembled a comprehensive list of the greatest Lly Duramax Water Pump Replacement Cost available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Lly Duramax Water Pump Replacement Cost that you consider buying. Your questions might include the following:

  • Is it worth buying an Lly Duramax Water Pump Replacement Cost?
  • What benefits are there with buying an Lly Duramax Water Pump Replacement Cost?
  • What factors deserve consideration when shopping for an effective Lly Duramax Water Pump Replacement Cost?
  • Why is it crucial to invest in any Lly Duramax Water Pump Replacement Cost, much less the best one?
  • Which Lly Duramax Water Pump Replacement Cost are good in the current market?
  • Where can you find information like this about Lly Duramax Water Pump Replacement Cost?

We’re convinced that you likely have far more questions than just these regarding Lly Duramax Water Pump Replacement Cost, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Lly Duramax Water Pump Replacement Cost, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Lly Duramax Water Pump Replacement Cost. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Lly Duramax Water Pump Replacement Cost buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Lly Duramax Water Pump Replacement Cost currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Lly Duramax Water Pump Replacement Cost has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Lly Duramax Water Pump Replacement Cost?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Lly Duramax Water Pump Replacement Cost.
  5. Customer Ratings: Number ratings grade Lly Duramax Water Pump Replacement Cost objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Lly Duramax Water Pump Replacement Cost.
  7. Product Quality: You don’t always get what you pay for with an Lly Duramax Water Pump Replacement Cost, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Lly Duramax Water Pump Replacement Cost is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Lly Duramax Water Pump Replacement Cost information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Lly Duramax Water Pump Replacement Cost is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: How much would it cost to replace a water pump?

A: Look at the DIY section and see if you think it’s something you can handle….. it sounds scary, but its not. What else were they going to replace? The $1200 was for nothing “extra” just a waterpump replacement. Might not of even had a new housing.

Q: Can DEX-COOL cause a water pump to leak?

A: This is yet more evidence of just how superior Dex-Cool is compared to any other coolant. A leaking water pump seal can be the result of a bad head gasket (or LB7 injector cup seal leak), should compression pressure find its way into the cooling system.

Q: Can a leaking water pump be repaired or replaced?

A: If the root cause of a water pump seal leak is due to overpressure, simply replacing the water pump will just buy you a little time. I recommend having your truck’s cooling system pressure tested before replacing the water pump, if there’s any question.

Q: Do I need to replace the impeller and water pump housing?

A: The impeller cartridge and the water pump housing are available separately, but most of you shouldn’t need to replace the housing every time the water pump needs to be replaced. The housings can be affected by a process similar to cavitation erosion.

Related Post: