Contents
The Best Makita 9564Cv of 2023 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Makita 9564Cv of 2023. Check our ranking below.
2,775 Reviews Scanned
- Powerful 13 amp motor delivers more output and variable (2, 800 - 10, 500) RPM
- Sass technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop
- Variable speed control dial enables user to match the speed to the application
- Constant speed control automatically applies additional power to the motor to maintain speed under load
- Soft start suppresses start-up reaction for smooth start-ups and longer gear life
- Powerful 13.0 AMP motor delivers more output and variable (2,800 - 10,500) RPM
- SJS technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop
- Variable speed control dial enables user to match the speed to the application
- Constant speed control automatically applies additional power to the motor to maintain speed under load
- Soft start suppresses start-up reaction for smooth start-ups and longer gear life
- FBA.Dimension : 5x11x15.7mm. Original Code :CB315 CB318 CB330 CB340 CB336 195396-3 191974-7 191978-9.
- Product Type : Replacement (Aftermarket) Condition : New
- Material: Japanese TOYO TANSO Carbon.Item locationg:USA.Made In China.
- Compatible with: Makita BO6040 Sander 9564 9565 9565CV 9560CV 9561CV 9564CV 9564CVL Angle Grinder GD0800C GD0810C Die Grinder 9563CV Grinder
- Compatible with: Makita 9566CV Cut Off Angle Grinder PW5001C Wet Stone Polisher 9566PC 6" SJS Cutoff / Angle Grinder 9565PC 5" SJS Angle Grinder 9564PC 4-1/2" SJS Angle Grinder.
- 1/2" Driver-Drill with 2-speeds (0-600 and 0-1,900 RPM) delivers up to 480 in. Lbs. Of Max Torque
- 1/2" Driver-Drill features a compact design at only 7-1/4" long and weighs only 3.3 lbs. With battery for reduced operator fatigue
- Impact Driver with variable speed (0-2,900 RPM and 0-3,500 IPM) delivers up to 1,460 in. Lbs. Of Max Torque
- Impact Driver features a compact design at only 5-3/8" long and weighs only 2.8 lbs. With battery for reduced operator fatigue
- Ergonomically designed handles with rubberized soft grips provide increased comfort
- 194074-2, 191974-7 and 191978-9 carbon brush set
- Compatible with Makita 9564CV, 9565CV, PW5001C, CB325, CB330, 9553NB,9554NB,9555NB,9556NB
- Carbon brushes are easy-to-wear items of the motor, and need to be replaced regularly due to the friction between the electric drive and the carbon brushes in daily use
- New carbon brushes keep the motor running and make you more productive
- 4 pcs/pack carbon brushes made with Imported high quality carbon
- Dimensions (LxWxH): 0.63" x 0.43" x 0.20"
- Replace Code : CB-318, CB-325, 194074-2, 195001-2, 191978-9.
- Compatibility: BO6040 Sander,9565CV Angle Grinder,9560CV Angle Grinder,9561CV Angle Grinder,9563CV Grinder,9564CV Angle Grinder,9564CVL Angle Grinder,GD0800C Die Grinder,GD0810C Die Grinder 9564 Angle Grinder,9565 Angle Grinder,9566CV Cut Off Angle Grinder,PW5001C Wet Stone Polisher,9566PC 6" SJS Cutoff / Angle Grinder ,9565PC 5" SJS Angle Grinder,9564PC 4-1/2" SJS Angle Grinder.
- 9553NB,9554NB,9557NB,9557PB,9558PB,BHR202,GD0600,GD0601,HR2470F,HR2811F,9553B,9553NBK,9554NBK,9555NB,9555NBK,9557PBX1,9558HN,9564P,GA5040,GA5040X1,HR2230,HR2470FT-Type-1,HR2470FT-Type-2,HR2811FT-Type-1,HR2811FT-Type-2,HR2811FX
- Compatible with: Makita BO6040 Sander 9564 9565 9565CV 9560CV 9561CV 9564CV 9564CVL Angle Grinder GD0800C GD0810C Die Grinder 9563CV Grinder.
- Compatible with: Makita 9566CV Cut Off Angle Grinder PW5001C Wet Stone Polisher 9566PC 6" SJS Cutoff / Angle Grinder 9565PC 5" SJS Angle Grinder 9564PC 4-1/2" SJS Angle Grinder.
- 2 Pairs of carbon brushes.
- 4 pcs/pack carbon brushes made with Imported high quality carbon
- Dimensions (LxWxH): 0.63" x 0.43" x 0.20"
- Powerful 10.0 AMP motor delivers more output and 11,900 RPM for the most demanding applications
- SJS technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop
- Larger cooling fan and blades pull more air through the motor to help maintain lower operating temperature
- Paddle switch with no lock-on for operator comfort
- Labyrinth construction prevents debris from penetrating the motor, bearings and gears for longer tool life
- Powerful 13.0 AMP motor delivers more output and variable (4,000 - 10,000) RPM
- SJS technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop
- Variable speed control dial enables user to match the speed to the application
- Variable speed control dial enables user to match the speed to the application
- Makita 9566CV 6" SJS High-Power Cut-Off/Angle Grinder
- Suitable for Makita 9555NB 9558NB 9558PB GD0600 9556NB 9556PB 9553NB 9554NB 9557NB 9557PB
- We have been specializing in the production of carbon brushes for 20 years. Our products are not only supplied to Chinese customers, but also sold to North America, Europe, Southeast Asia, South America and other regions. Advantages of our products: excellent quality, stable performance, reliable working time and complete varieties.
- Powerful 13.0 AMP motor delivers more output and 10,500 RPM for the most demanding applications
- SJS technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop
- Constant speed control automatically applies additional power to the motor to maintain speed under load
- Soft start suppresses start-up reaction for smooth start-ups and longer gear life
- Electronic current limiter helps protect the motor from overload
- 4 pack carbon brushe
- Compatibility: M-akita,BO6040 Sander,9565CV Angle Grinder,9560CV Angle Grinder,9561CV Angle Grinder,9563CV Grinder,9564CV Angle Grinder,9564CVL Angle Grinder,GD0800C Die Grinder,GD0810C Die Grinder 9564 Angle Grinder,9565 Angle Grinder,9566CV Cut Off Angle Grinder,PW5001C Wet Stone Polisher,9566PC 6" SJS Cutoff / Angle Grinder ,9565PC 5" SJS Angle Grinder,9564PC 4-1/2" SJS Angle Grinder
- 9553NB,9554NB,9557NB,9557PB,9558PB,BHR202,GD0600,GD0601,HR2470F,HR2811F,9553B,9553NBK,9554NBK,9555NB,9555NBK,9557PBX1,9558HN,9564P,GA5040,GA5040X1,HR2230,HR2470FT-Type-1,HR2470FT-Type-2,HR2811FT-Type-1,HR2811FT-Type-2,HR2811FX
- 7.5 AMP motor delivers 10,000 RPM for high output power
- Compact design with small 2-1/2" diameter barrel and weighs only 4.5 lbs. for added comfort
- Protective zig-zig varnish seals the armature from dust and debris for longer tool life
- Labyrinth construction seals and protects the drive gear from debris
- Slide switch is located on side of the motor housing that can be re-positioned every 90Degree
- ⭐ This carbon brush set replaces Makita P/N CB-325, 194074-2 & 195001-2.
- ⭐Carbon Brushes are normally referred to as wear items and commonly replaced due to friction during daily use in motors.This carbon brushes are made to last longer. These carbon brushes make sure your motor runs properly, and fix a motor that operates intermittently
- ⭐Replace Code : CB-318 and 191978-9.
- ⭐Compatibility: Makita,BO6040 Sander,9565CV Angle Grinder,9560CV Angle Grinder,9561CV Angle Grinder,9563CV Grinder,9564CV Angle Grinder,9564CVL Angle Grinder,GD0800C Die Grinder,GD0810C Die Grinder 9564 Angle Grinder,9565 Angle Grinder,9566CV Cut Off Angle Grinder,PW5001C Wet Stone Polisher,9566PC 6" SJS Cutoff / Angle Grinder ,9565PC 5" SJS Angle Grinder,9564PC 4-1/2" SJS Angle Grinder
- ⭐9553NB,9554NB,9557NB,9557PB,9558PB,BHR202,GD0600,GD0601,HR2470F,HR2811F,9553B,9553NBK,9554NBK,9555NB,9555NBK,9557PBX1,9558HN,9564P,GA5040,GA5040X1,HR2230,HR2470FT-Type-1,HR2470FT-Type-2,HR2811FT-Type-1,HR2811FT-Type-2,HR2811FX
- Suitable for Makita 9565CV Angle Grinder /BO6040 Sander /9560CV Angle Grinder /9561CV Angle Grinder /9563CV Grinder /9564CVL Angle Grinder /9564CV Angle Grinder /GD0800C Die Grinder
- Suitable for Makita 9564 Angle Grinder /GD0810C Die Grinder /9565 Angle Grinder /9566CV Cut Off Angle Grinder / /9564PC 4-1/2" SJS Angle Grinder PW5001C Wet Stone Polisher /9566PC 6" SJS Cutoff Angle Grinder /9565PC 5" SJS Angle Grinder/SG1250 Electric Saw
- We have been specializing in the production of carbon brushes for 20 years. Our products are not only supplied to Chinese customers, but also sold to North America, Europe, Southeast Asia, South America and other regions. Advantages of our products: excellent quality, stable performance, reliable working time and complete varieties.
- 【Package Included】8 pcs/pack carbon brushes made with Imported high quality carbon
- 【Compatibility】BO6040 Sander,9565CV Angle Grinder,9560CV Angle Grinder,9561CV Angle Grinder,9563CV Grinder,9564CV Angle Grinder,9564CVL Angle Grinder,GD0800C Die Grinder,GD0810C Die Grinder 9564 Angle Grinder,9565 Angle Grinder,9566CV Cut Off Angle Grinder,PW5001C Wet Stone Polisher,9566PC 6" SJS Cutoff / Angle Grinder ,9565PC 5" SJS Angle Grinder,9564PC 4-1/2" SJS Angle Grinder.
- 9553NB,9554NB,9557NB,9557PB,9558PB,BHR202,GD0600,GD0601,HR2470F,HR2811F,9553B,9553NBK,9554NBK,9555NB,9555NBK,9557PBX1,9558HN,9564P,GA5040,GA5040X1,HR2230,HR2470FT-Type-1,HR2470FT-Type-2,HR2811FT-Type-1,HR2811FT-Type-2,HR2811FX
- 【Replace Code 】CB318 CB330 CB340 CB314 CB315 9560CV 9563CV 9565CV
- 【Non-original Parts】Change the carbon motor brush use the original spring is a better choice.
Last update on 2023-08-27 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Makita 9564Cv?
Do you get stressed out thinking about shopping for a great Makita 9564Cv? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Makita 9564Cv, which is why we have assembled a comprehensive list of the greatest Makita 9564Cv available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Makita 9564Cv that you consider buying. Your questions might include the following:
- Is it worth buying an Makita 9564Cv?
- What benefits are there with buying an Makita 9564Cv?
- What factors deserve consideration when shopping for an effective Makita 9564Cv?
- Why is it crucial to invest in any Makita 9564Cv, much less the best one?
- Which Makita 9564Cv are good in the current market?
- Where can you find information like this about Makita 9564Cv?
We’re convinced that you likely have far more questions than just these regarding Makita 9564Cv, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Makita 9564Cv, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Makita 9564Cv. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Makita 9564Cv buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Makita 9564Cv currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Makita 9564Cv has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Makita 9564Cv?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Makita 9564Cv.
- Customer Ratings: Number ratings grade Makita 9564Cv objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Makita 9564Cv.
- Product Quality: You don’t always get what you pay for with an Makita 9564Cv, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Makita 9564Cv is should be an indication of how long it will work out for you.
We always remember that maintaining Makita 9564Cv information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Makita 9564Cv is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
FAQ:
Q: What kind of clutch does Makita 9564cv have?
A: The 9564CV is engineered with SJS™ mechanical clutch system, an innovation from Makita that protects the gears by automatically disengaging the motor should the grinding wheel accidentally catch or bind. The 9564CV is built with comfort and ergonomic features for extended use.
Q: What can you do with a Makita 9564pc grinder?
A: The 9564PC is a versatile and powerful grinder engineered for demanding applications including cutting, ferrous metal, paint and rust removal, shipyard maintenance, heavy machinery, metal polishing, general steel grinding, auto repair work, cutting brick and masonry, and restoration work.
Q: Which is Makita Grinder has a 13 amp motor?
A: The 9564CV is engineered with Makita’s innovative SJS mechanical clutch system to protect the gears for longer tool life. 13 AMP Power with SJS mechanical clutch system to Protect Gears. The 9564CV is powered by a 13 AMP motor with soft start for smoother start-ups.