Contents

20 Best Mazda 3 Keyless Entry Replacement of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best Mazda 3 Keyless Entry Replacement of 2023. Check our ranking below.

2,982 Reviews Scanned

Rank No. #1

Car Key Fob Keyless Entry Remote fits 2007 2008 2009 Mazda 3 (KPU41794, 41794)

fits 2007 2008 2009 Mazda 3
Replacement for P/N: KPU41794, 41794
Remote is user programmable with provided step-by-step instructions
Complete electronic assembly with battery
Durable long lasting construction, easy to use

Rank No. #2

Keyless2Go Replacement for New Keyless Entry 4 Button Remote Flip Key Fob for Mazda 6 and 3 BGBX1T478SKE125-01

This is a brand new replacement keyless entry remote flip key for select Mazda 3, 6 and Miata MX-5 vehicles. Please check product description below for vehicle fit guide.
Please make sure that your original remote has FCC ID: BGBX1T478SKE125-01, otherwise this remote flip key will not work.
A website link to free DIY programming instructions will be provided with every order. 2 working original keys required in order to perform the DIY programming. If you do not have 2 keys than you will need to get this remote programmed at an automotive locksmith or dealer
If your vehicle has Smart Entry system (push button ignition), then this flip key will not work.
New complete working flip key remote with all electronics and batteries included plus FREE tech support with every order. Every single remote is tested before it is sent to make sure it is transmitting.

Rank No. #3

Remote Smart Key Fob Shell Case Fit for Mazda 3 CX-3 CX-5 WAZSKE13D01 662F-SKE13D01 3 Buttons Replacement Keyless Entry Car Key Fob Cover (Silver, 3 Buttons)

Fitment - This key fob case fits for WAZSKE13D01 SKE13D-01 662F-SKE13D01 KDY3-67-5DY. Please make sure your car key remote looks the same as this key case pictured.
HIGH QUALITY REMOTE SMART KEY FOB CASE - This item is not a remote. It is just an empty remote key shell case replacement. There is NO interior (remote/electronics/transponder chip)unit inside.
EASY INSTALLATION - This key fob cover shell is easy to install. Transfer the insides of your original remote to this new key shell, cut the key blade and then it will be OK. No programming needed.
GREAT MONEY SAVER - This is a very money-wise way to replace that original key fob on your car. No need to spend over $100 to replace the entire fob when only the exterior sheath was deteriorated. This is a durable replacement key case for broken or worn keys, or great for an additional key.
NOTICE - The key blade is uncut and needs to be cut at your local dealer or qualified locksmith to match your car. If you have any questions, please feel free to contact us. We can slove for you within 24HRS.

Rank No. #4

KeylessOption Keyless Entry Remote Car Key Fob Transmitter for Mazda 3 2007-2011 KPU41777

Fully tested complete replacement keyless entry remote key fob with a battery and electronics installed
DIY step by step programming instructions included (Tech support included with every order)
Compatible with: KPU41777 , 41777
KeylessOption Warranty Card Included with each purchase
This is a replacement part to match the original in form and function

SaleRank No. #5

Keyless2Go Replacement for New Keyless Entry 3 Button Remote Flip Key Fob for Mazda 5 2 CX-7 CX-9 BGBX1T478SKE125-01

QUALITY REPLACEMENT: Replace your lost or broken remote key quickly and easily with this FCC Registered Keyless2Go car key fob
EASY DIY PROGRAMMING REMOTE: Program the keyless entry remote from home with easy to follow instructions. Car key part will require cutting and programming from a qualified dealer or locksmith
FITMENT: This key fob replacement is compatible with a selection of Honda vehicles; check the vehicle fitment tool above and description for exact match.
PART NUMBERS: Works as replacement for FCC ID: BGBX1T478SKE125-01
LAB TESTED: Each car key replacement comes complete with batteries and has been pre-tested to ensure quality and functionality

Rank No. #6

SCITOO 1PC Car Key Fob Keyless Entry Remote 4 Buttons Replacement for Mazda 3 5 6 CX-7 CX-9 MX-5 Miata RX-8 Flip Key Fob BGBX1T478SKE125-01

🚘🔑 NOTES: For your vehicle safety, we Only provide the Replacement New Key with UNCUT KEY. Please find your local locksmith for cutting. The keyless entry remote with battery and electronics installed.
🚘🔑 PARAMETER: Please check your vehicles on Vehicle Fitment Chart. The Keyless Remote compatible with BGBX1T478SKE125-01 662F-SKE12501.
🚘🔑 INSTRUCTION: If your vehicles require a diagnostic equipment, please find local automotive locksmith or dealer to program. Programming Instructions: http://freeremoteinstructions.com or http://www.keyfobprogram.com/ or http://www.programyourremote.com/
🚘🔑 BENEFITS: Best replacement for the original unit with quality tested materials.
🚘🔑 SERVICE: 100% satisfy after-sales service.

Rank No. #7

KeylessPros 3-Button Replacement Key Fob Keyless Entry Remote, Fits Ford, Lincoln, Mercury, Mazda F150 F250 F350 Escape Expedition Explorer Ranger, CWTWB1U345 (2-Pack)

🔑 EASY DO-IT-YOURSELF PROGRAMMING, the KeylessPros remote car key fob replacement can be programmed by anyone! You will be able to program these Key Fob Keyless Entry Remote from home with provided easy-to-follow instructions
🔑COMPATIBLE WITH KEYLESS ENTRY VEHICLES, The KeylessPros remote key fob replacement is compatible with Ford, Lincoln, Mercury, Mazda F150 F250 F350 Escape Expedition Explorer Ranger. Complete electronic assembly with batteries.
🔑 AFFORDABLE CAR KEY FOB REPLACEMENT: the KeylessPros keyless entry remote key fob replacement is compatible with part number CWTWB1U345, CWTWB1U331, CWTWB1U212, GQ43VT11T, 2L3T-15K601-AA, 2L3T-15K601-AB, 8L3T-15K601-AA, 8L3Z-15K601-AA, F8DB-15K601-AA
🔑 HIGH-QUALITY SPARE KEY FOR CAR- This is a high-quality Car Key Fob Replacement which was manufactured to guarantee compatibility to your vehicle model. We made sure this car key will match the original in form and function just like the OEM one would.
🔑 CUSTOMER SATISFACTION IS OUR #1 PRIORITY- KeylessPros takes pride in bringing you affordable locksmith solutions for a fraction of the OEM cost. All of our items are tested beforehand, but if you’re not 100% satisfied, please contact us for immediate help. We guarantee the quality and reliability of KeylessPros products.

Rank No. #8

fits Mazda 3 / Mazda 6 Key Fob Keyless Entry Remote Shell Case & Pad

fits Mazda 2004-2006 3, 2003-2005 6
Replacement for P/N: KPU41846, KPU41704, KPU41794, KPU41706
Replacement case & button pad, electronics and battery are not included
Durable long lasting construction
Re-programming is not required

Rank No. #9

Key Fob Remote Replacement Fits for Mazda MX-5 Miata 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015//Mazda 3 2010-2013/Mazda 6 2009-2013 BGBX1T478SKE125-01 Keyless Entry Remote Control BBM4-67-5RY

★HIGH-QUALITY: Every Single Keyless Entry Remote Control Car Key Fob Is Fully Pre-tested by Professional Locksmith Tools before Shipping. All Our Key Fobs are Pre-installed with Battery and Electronics.
★COMPATIBILITY: This Keyless Remote Key Fob Replacement Is Compatible with Remote cross reference part # BBM4-67-5RY, Flip Head cross reference part # G2YA-76-2GXB and FCC ID:BGBX1T478SKE125-01. CHIP:4D63. This Transmitter Doesn't Work on Push Start Button Vehicles and it only Supports Regular Key Vehicles.
★REPLACEMENT: This Remote Flip Key Is Compatible with 2010-2013 Mazda 3/2009-2013 Mazda 6/2006-2015 Mazda MX-5 Miata. Please Check Our Product Description and Vehicle Fitment Tool for Full Compatible Vehicles List.
★PROGRAMMING: The Remote Fob Key can be Self-programmable, but the key blade needs to be cut and programmed by a locksmith. We recommend you find a professional locksmith to help programming because most people think the programming steps are very complicated .
★PACKING LIST: 1 X 4 Button Keyless Control Key Fob with Electronics and Battery Pre-Installed. 100% Brand New Remote Key Fob and Ready to Program.

Rank No. #10

Keyless2Go Replacement for New Keyless Entry 4 Button Remote Flip Key Fob for Mazda 6 and 3 BGBX1T478SKE125-01 (2 Pack)

This is a brand new replacement keyless entry remote flip key for select Mazda 3, 6 and Miata MX-5 vehicles. Please check product description below for vehicle fit guide.
Please make sure that your original remote has FCC ID: BGBX1T478SKE125-01, otherwise this remote flip key will not work.
A website link to free DIY programming instructions will be provided with every order. 2 working original keys required in order to perform the DIY programming. If you do not have 2 keys than you will need to get this remote programmed at an automotive locksmith or dealer
If your vehicle has Smart Entry system (push button ignition), then this flip key will not work.
New complete working flip key remote with all electronics and batteries included plus FREE tech support with every order. Every single remote is tested before it is sent to make sure it is transmitting.

Rank No. #11

Rpkey Silicone Keyless Entry Remote Control Key Fob Cover Case protector Replacement Fit For Mazda 2 3 5 6 CX-5 CX-7 CX-9 RX-8 MX-5 Miata BGBX1T478SKE125-01 662F-SKE12501 SKE12501 KPU41788

High quality silicone rubber protective cover for your existing keyless entry remote or key
This is Silicone protective cover Durable unfading
Just a key cover
Prevent damage and personalize your remote or key

Rank No. #12

OEM 4-Button Smart Key Fob Remote Compatible with 2014-2018 Mazda 3 & 6 (FCC ID: WAZSKE13D01, P/N: GJY9-67-5DY)

OEM Smart Proximity Key Fob Remote
MUST Be Programmed and Cut by a Professional Automotive Locksmith
OEM Electronics Provide Durability and Longer Range / Stronger Signal than Aftermarket Replacements
Match FCC ID and Part Number in Description to an Existing Remote to Ensure Compatibility with Your Vehicle
Compatible Models: 2014-2018 Mazda 3 Sedan, 2014-2018 Mazda 6, 2016-2019 Mazda MX-5 Miata

SaleRank No. #13

ECCPP Replacement fit for 315 MHz Uncut Keyless Entry Remote Head key Flip Car Key Transmitter Fob Mazda 3 5 6 CX-7 CX-9 RX-8 MX-5 Miata KPU41788 (Pack of 1)

【ATTENTION】This listing is for Replacement Keyless Entry Remote with electronics and battery. The use and function will be the same as the original unit.
【REPLACEMENT】The Keyless Entry Kit with Interchange Part Number: KPU41788, 41525, 4238A-41525.
【FITMENT】NOT compatible with push to start systems. The 315MHz Keyless Car Remote is a replacement that fits for 2005 Mazda 3, 10-2013 Mazda 3, 2010 Mazda 5, 2005 Mazda 6, 09-2013 Mazda 6, 2010 Mazda CX-7, 2010 Mazda CX-9, 2005 Mazda RX-8, 2010 Mazda MX-5 Miata. Please check Vehicle Fitment Chart for Body Style and other vehicle attributes.
【PROGRAMMING】No self-programmed available. Please find Locksmith or Dealer for programming. The Keyless Entry Remote constructed with high quality materials for long lasting durability.
【SERVICE】If you have any questions about our Keyless Fob Replacement, please contact our friendly, helpful, and knowledgeable customer service representatives, we will be glad to address any questions or concerns promptly.

SaleRank No. #14

big-autoparts 2 Replacement Keyless Entry Remote Key Fob Clicker Transmitter for Ford 1998-2016 F-150 F-250 F-350, Mazda, Mercury, Lincoln - 3 Button,black

Replacement Keyless Entry Part Numbers: CWTWB1U345,CWTWB1U331,GQ43VT11T,CWTWB1U212,8L3T-15K601-AB,2L3T-15K601-AB,F87B-15K601-AB,8L3Z-15K601-AA,164-R8007,OUCD6000022,164-R8070.Note: Your vehicle must already be equipped with keyless entry for the remote to work.
100% Pindex complete remote pair of replacement keyless entry remote ignition key combo with a battery,electronics and transponder chip(will start your car) installed.
Compatible with Ford 1998-2016 F-150 F-250 F-350,Great replacement part to match the original in form and function.Please be sure to check the vehicle compatibility guide because there are remotes that look the same but are different.Also,please make sure that your original remote has the same buttons on it.

Rank No. #15

OCPTY 1 X Flip Key Entry Remote Control Key Fob Transmitter Replacement for 2005-2015 for Mazda 3 6 MX-5 Miata CX-7 CX-9 RX-8 for Mazda 2 for Mazda 5 KPU41788 4238A-41525 -4 Buttons 315Mhz

👍🚗🔑 COMPABITILITY: This is a replacement for specific for Mazda 3 5 6 CX-7 CX-9 MX-5 Miata RX-8 . Detailed vehicle’s Information please check Product Description below
👍🚗🔑 FCC: KPU41788 41525 4238A-41525
👍🚗🔑 PRODUCT INFORMATION: This keyless with Key Blade must be programmed and cut by a qualified locksmith or dealership; before cutting, please make sure the remote programming can work to your vehicle
👍🚗🔑 BENEFIT: Inspect strictly before shipment. Easy to be programmed. A great key fob replacement for worn or broken original items
👍🚗🔑 NOTES: Replacement Keyless Entry Remote Fob with battery and electronics installed. Sorry no Programming Instructions are included in parcel, due to kinds of specific vehicles. But please do email us for your own Vehicle's Instructions or search videos on YouTube

Rank No. #16

Car Key Fob Keyless Entry Remote fits Ford, Lincoln, Mercury, Mazda (CWTWB1U793 3-btn) - Guaranteed to Program

fits Ford, Lincoln, Mercury, Mazda - Guaranteed to Program
Replacement for P/N: CWTWB1U793
User programmable with provided step-by-step instructions 2 original keys required to use supplied instructions. If you only have 1 key then you will need to get this key programmed by a locksmith or dealership.
Complete electronic assembly with battery
Durable long lasting construction, easy to use

Rank No. #17

Keyless2Go Replacement for New Keyless Entry Remote Car Key Fob for Vehicles That Use FCC KPU41846

This listing is for a brand new replacement key fob remotes for 2004-2008 Mazda 3 and 2003-2005 Mazda 6 (HATCHBACK + WAGON only)
There are possible remotes for Mazda 3 vehicles and they are not interchangeable. Please make sure your original remote has part number 41846 and FCC ID: KPU41846
A website link to free DIY programming instructions will be provided with every order.
Your original remote must be FCC ID: KPU41846, Model: 41846
New complete working remote with all electronics and batteries included plus FREE tech support with every order. Every single remote is tested before it is sent to make sure it is transmitting.

Rank No. #18

Horande 4 Buttons Replacement Key Fob Cover Case fit for Mazda Mazda 3 6 8 Miata MX-5 CX-3 CX-5 CX-7 CX-9 Keyless Entry Key Fob Shell

High quality 4 Buttons key fob case fit for Mazda 3 6 CX3 CX5 CX7 CX9 SPEED3 key fob .
Easy installation which does not require reprogramming.
Best replacement key shell for broken or worn keys, or great for an additional key.
No electronics or circuit board are included.Just remove the cricuit board to new case.
Notice: Uncut insert slide out valet emergency key included (Will NOT fit flip key style remote please make sure vehicle uses smart key). The keyblade is uncut and needs to be brought to a locksmith or a dealer to be cut to match your car.

Rank No. #19

Car Key Fob Keyless Entry Remote fits 2007 2008 2009 2010 2011 Mazda 3 (KPU41777)

fits 2007 2008 2009 2010 2011 Mazda 3
Replacement for P/N: KPU41777
Remote is user programmable with provided step-by-step instructions
Complete electronic assembly with battery
Durable long lasting construction, easy to use

Rank No. #20

X AUTOHAUX 3 Button Flip Car Keyless Entry Remote Control Replacement Key Fob Proximity Smart Fob BGBX1T478SKE125-01 for Mazda 5 2 CX-7 CX-9 315MHz Chip 63 80

Part Numbers/FCC ID: BGBX1T478SKE125-01 Frequency: 315MHz. Note: Not a key shell, it is a whole key.
Proximity Fob Fits for Mazda 2 2011-2014, for Mazda 3 2010-2013, for Mazda 5 2006-2015, for Mazda CX-7 2007-2012, for Mazda CX-9 2007-2015
Pros of Our Keyless Remote: With built in chip, sensitive response, 3 buttons car key: remote locking, unlocking, panic. Fast response, wireless remote control.
Notice Programming: This remote and door key must be programmed and cut by a qualified locksmith or dealership(consult some different locksmiths before programming to ensure it is successful).NOTE a working key fob was needed in order to add a new key. This remote must be programmed and cut by a qualified locksmith or dealership
Package for Car Key Fob:1 x Car Keyless Entry Remote (Battery is included). Size: 6.8x3.3cm / 2.68"x1.30"(L*W). Please check OE number/FCC ID and product picture with one before purchase.

Last update on 2023-08-23 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Mazda 3 Keyless Entry Replacement?

Do you get stressed out thinking about shopping for a great Mazda 3 Keyless Entry Replacement? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Mazda 3 Keyless Entry Replacement, which is why we have assembled a comprehensive list of the greatest Mazda 3 Keyless Entry Replacement available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Mazda 3 Keyless Entry Replacement that you consider buying. Your questions might include the following:

Is it worth buying an Mazda 3 Keyless Entry Replacement?
What benefits are there with buying an Mazda 3 Keyless Entry Replacement?
What factors deserve consideration when shopping for an effective Mazda 3 Keyless Entry Replacement?
Why is it crucial to invest in any Mazda 3 Keyless Entry Replacement, much less the best one?
Which Mazda 3 Keyless Entry Replacement are good in the current market?
Where can you find information like this about Mazda 3 Keyless Entry Replacement?

We’re convinced that you likely have far more questions than just these regarding Mazda 3 Keyless Entry Replacement, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Mazda 3 Keyless Entry Replacement, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Mazda 3 Keyless Entry Replacement. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Mazda 3 Keyless Entry Replacement buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Mazda 3 Keyless Entry Replacement currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Mazda 3 Keyless Entry Replacement has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Mazda 3 Keyless Entry Replacement?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Mazda 3 Keyless Entry Replacement.
Customer Ratings: Number ratings grade Mazda 3 Keyless Entry Replacement objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Mazda 3 Keyless Entry Replacement.
Product Quality: You don’t always get what you pay for with an Mazda 3 Keyless Entry Replacement, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Mazda 3 Keyless Entry Replacement is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Mazda 3 Keyless Entry Replacement information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Mazda 3 Keyless Entry Replacement is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: How can I tell if my car has a keyless entry system?

A: Another way to find out if you have a keyless entry system installed on your vehicle is to call your local dealer and give them your Vehicle Identification Number (VIN). The dealership will be able to tell you if you have a factory or dealer installed keyless entry system…

Q: Do I still need a key with keyless entry?

A: One Does Not Need the Actual Key For Ignition With a Keyless Entry (Photo Source: vox) Smart Key. On the other hand, the Smart Key is a car key containing a microcomputer, which lets the owner gain access to and unlocks the vehicle’s locking mechanism. It completely replaces the metal key found in many modern-day cars.

Q: Does my car have keyless entry system?

A: There are a couple of ways to find out. The first and easiest way to tell that you do have a keyless system installed on your car is to look at the passenger side door. If there is not a key hole on the outside of the passenger door then you most likely do have a keyless system.

Q: How do you install an auto keyless entry?

A: Keyless Entry Installation How to Install a Keyless Entry System Step #1: Remove the Old Deadbolt & Door Knob Step #2: Determine the Backset of Your Door Step #3: Install the New Deadbolt into the Door Step #4: Program Your Access Code Step #5: Install the New Door Knob & Strike Plates Step #6: Test the Door and Lock