Contents

The Best Mks Board of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Mks Board of 2023. Check our ranking below.

2,514 Reviews Scanned

Rank No. #1

Ickiya MKS Gen L V2.1 3D Printer Control Board Motherboard, Open Source Marlin Support TMC2209/TMC2208/TMC2208/TFT35 V3.0/TFT35 E3/BL TOUCH/LCD12684 for Ramps 1.4 /Ramps 1.5/Ramps 1.6 3D Printer

✅Integrate 2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users can change their own motor drive, support A4988/TMC2209/TMC2208/TMC5160/DRV8825 stepper drivers
✅Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly.
✅24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem.
✅It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 /TFT32/TFT35/TFT50/TFT70 touch screen.
✅The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive.

Rank No. #2

Makerbase MKS Robin E3 V1.1 Silent Controller Board Integrated 4 TMC2209 Drivers Replacement Mainboard Original Installation Location for Creality Ender-3/5 CR-10 3D Printers Voron 0.1 & Klipper

WIDE RANGE OF COMPATIBILITY: The MKS Ender 3 CR-10 silent mainboard Robin E3 is designed as a plug-and-play replacement board for various popular 3D printers, including the Creality Ender 3, Ender 3 Pro, Ender 5, and CR10/CR10S
INTEGRATED TMC2209 STEPPER DRIVERS: The Makerbase MKS Robin E3 ender-3 CR 10silent contorl board comes with integrated TMC2209 stepper drivers, which offer precise and silent motor control for smooth and quiet printing. These drivers provide efficient current control and reduce vibrations and noise during operation
USER INTERFACE OPTIONS: The MKS Robin E3 ender 3 CR-10 silent motherboard supports multiple user interface options, including the MKS MINI12864 V3, MKS TFTxx, MKS LCD12864B, LCD12864, and LCD2004 [7]. Users can choose the interface that suits their preference and easily navigate through the printer settings and control options.
SENSORLESS HOMING FUNCTION: The MKS Robin E3/E3D ender-3 contorl motherboards have built-in support for sensorless homing functions. This feature allows the printer to home its axes without the need for additional limit switches, simplifying the wiring and setup process.
FIRMWARE CUSTOMIZATION: The MKS Robin E3 ender 3 CR-10 silent board can be customized and configured through firmware settings. Users can modify settings such as enabling advanced pause features, configuring filament runout sensors, and nozzle park features. These customization options provide flexibility to tailor the printer's functionality to specific requirements

Rank No. #3

Makerbase MKS Eagle 32Bit Control Board TMC2209 UART on Board 3D Printer Parts TFT Screen USB Print VS Nano V3.0 Supports 2 Extruder Support Marlin & Klipper

INTEGRATED DESIGN: The MKS Eagle is indeed an integrated design version of Nano V3.0. combining the functionalities of Nano V3 with additional features and optimizations.
STM32F407VET6 MCU: The control board is equipped with a powerful STM32F407VET6 microcontroller unit, which operates at a clock speed of 168MHz. This MCU provides high processing power and performance.
TMC2209 UART MODE DRIVERS: The MKS Eagle utilizes TMC2209 drivers in UART mode. These drivers offer advanced motor control and improved motion accuracy, resulting in smoother and quieter operation of the 3D printer.
INTEGRATED HEAT DISSIPATION: The board features integrated heat dissipation to ensure efficient cooling and prevent overheating during prolonged printing sessions. This design helps maintain stable performance and extends the lifespan of the components.
FOUR-LAYER PCB OPTIMIZATION: The MKS Eagle employs a four-layer PCB optimization design. This design enhances the board's stability, signal integrity, and electromagnetic interference (EMI) resistance, contributing to reliable and accurate 3D printing.

Rank No. #4

MKS Gen L V1.0 3D Printer Integrated Motherboard Controller PCB Board A4988/DRV8825/TMC2208/TMC2130 Like Ramps 1.6 MKS Gen V1.4 Mainboard

Use high quality MOSFET tube,better cooling and more stable.Use special power chip,support 12-24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently and power shortage.
Integrate 2560 and Ramps1.4 one PCB,which designed to avoid complicated connections, easier wiring and more stable Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Run Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly.
Support a variety of stepper drivers: A4988,DRV8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers, A4988 driver board widely used in 3D printers and small CNC machines.
Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor's rated voltage toachieve higher step rates.Use the configuration file to set the driving current mode, avoid manual adjustment of the current to cause the burned drive, convenient, safe and reliable.
Support functions: Non-trace resumption after power off, run out filament ,and auto shut down, XTZ axis with different color terminal controls the motors and end stop,which is convenient to wire.Use high-quality 4 layer PCB&Use special power chip.Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces.

Rank No. #5

Makerbase MKS DLC32 Laser Engraver DIY Desktop Engraving Machine Mainboard Upgrade Offline Controller 32bits ESP32 WiFi TFT Touch Screen Color Display TS35 LightBurn LaserGRBL Phone App Web Control

POWERFUL REPLACEMENT CAPABILITIES: Makerbase laser CNC engraver machine mainboard kit can work for leaser engravinge machine and CNC cutting mahcine both which is an offline engraving master control kit developed for desktop engraving machines. The hardware is equipped with a 32-bit high-speed ESP32 module, integrated WIFI function, and directly drives a 3.5-inch touch color screen; it can realize fast engraving and WEB web pages. Control, mobile phone APP control and other functions.
FLEXIBLE ADAPTATION CAPABILITIES: Makerbase laser CNC engraver machine control board can be used on all the desktop laser CNC engraver for homeuse. The MCU ES which is built-in ESP32-WROOM-32U 32 bits DOWD-V3 chip, support clock frequency up to 240MHZ. 8192KBytes flash and 520KBytes ram DC12v/24v powerinput.
ULTRA-HIGH SPEED OPERATION CAPABILITY: The laser speed for Makerbase wood laser CNC engraver machine motherboard upgrade tool accessories for beginners can reach 8000mm/min, due to the high-speed IO flip speed of the main control module and a powerful timer, MKS DLC32 can achieve a very high-speed engraving speed.
WIDE RANGE OF COMPATIBILITY: Makerbase MKS DLC32 Offline Controller can support GRBLLASER and Lightburn software both, which is very easy to use for all laser engraver users
MOBILE PHONE APP AND WEB SUPPORT: Makerbase laser CNC engraving machine mother board also have the phone app function, which can connect to MKS DLC32, control movement, edit image, upload files and so on. Android verison has been uploaded to Google Play. For IOS, please search "MKSLaser" on APPLE App Store. By the way, If you are connected to 5G WiFi, this may cause the APP to fail to upload files, so please do not connect to 5G WiFi.

Rank No. #6

KINGPRINT 3D Printer MKS Gen V1.4 Controller Board Mega 2560 R3 Motherboard RepRap Ramps1.4 Compatible with USB

Mega 2560 and ramps1.4 set on a board, to solve complicated Ramps1.4 combination of interfaces, the problem of failure prone.
Replace the motor drive, drive and support A4988 DRV8825 TMC2208 TMC2130 drive.
The circuit board with high-quality 4-layer, heat and made a special optimization; ramps are 2 shelves.
Using high-quality MOSFET, and better heat dissipation.
Using a dedicated power chip, support 12V-24V power input, the voltage converter chip to solve the heat problem Ramps.

Rank No. #7

MKS GEN L V1.0 Controller Board 3D Printer Kit Mainboard Ramps1.4 Dual Extruder Touch for 3D Printer Accessories

Use CH340 Serial Port Chip -- Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Use CH340 serial port chip, more easily install the drive than 16U2.
Compatible With -- Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32. X-axis, Y-axis and Z-axis with different color terminal controls the stepper motors and endstops, which is convenient to wire.
Support 24V Input -- The heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats. Run Marlin firmware, the configuration is completely same as Ramps 1.4.
Support a Variety of Stepper Drivers -- 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like.
Reserve External Driver Signal -- available to connect external high-current driver to drive the 57 and 86 stepper motors. Use high-quality MOSFET, better cooling effect and more stable. Use specific power chip, support 12V-24V power input, and resolve t.

Rank No. #8

Stepper Motor Controller Board, Stepping Motor Drive Controller Speeds Regulation Positive Negative Rotation Control for MKS OSC

[Stepping Motor Controller]: This module is a pulse generation module and supplies stepper driver as a signal.
[Note]: To control the stepper motor, it must be equipped with a driver.
[Feature]: This simple controller + stepper driver + stepper motor + DC power supply can form a simple control platform.
[Specification]: The controller has a total of 3 kinds of frequency signals: high 5.4k-160khz, medium 540-16.6khz, low 80-2.4khz.
[PWM]: It can generate pulse signal and PWM signal, and can be selected by jumping. Frequency measurement: Can measure PUL and common cathode (or common anode) two port.

Rank No. #9

KOOBOOK 1Pcs 3D Printer Control Board Controller PCB Board MKS Gen L V1.0 Integrate Ramps Motherboard 12/24V

2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users can change their own motor drive, support 4988 drive and 8825 drive, TMC2100 drive.
Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly.
24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem.
It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 and TFT32 touch screen.
The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive.

Rank No. #10

MKS DLC32 CNC Laser- Engraving Controller Board GRBL CNC Shield GRBL TFT WiFi Control Board for CNC Engraver Machine mks dlc32 Board

MKS DLC32 motherboard kit, is an offline engraving master control kit developed for desktop engraving machine.
Border preview; Super grayscale carving function.
Precise positioning and high precision carving. Repeatable circular engraving
The hardware is equipped with 32 bit high-speed ESP32 module, integrated WIFI function, and directly drives a 3.5in touch color screen.
The mounting holes and board size of MKS DLC32 are conpatible with MKS Dlc and it can also used with GRBlaser and Lightburn PC software.

Rank No. #11

Engraver Mainboard, Cutter Control Board WiFi APP Control MKS DLC32 32 Bit Stable 12‑24VDC for 3D Printer

TMC2209 STEPPER MOTOR DRIVER: Ultra quiet, designed to improve your performance and prevent overheating. It has a , which makes it easier to grip and control.
GOOD ACCURACY WORK: 3D printer touch screen can be highly coordinated with the machine controller to provide high- printing operations and print high-quality and stable products.
BASIC PARAMETERS: 32 bit STM32 processor, supporting storage card storage, expandable WIFI module, power outage relay module, material outage detection switch, and external card slot.
APP CONTROL: The board can achieve functions such as fast carving, webpage control, and mobile app control. The installation holes and circuit board of MKS DLC32 are compatible with MKS DLC and can also be used with GRBLaser and LightBurn PC software.
FINE WORKMANSHIP: The motherboard adopts an ESP32‑WROOM 32U module, embedded with a dual core 32‑bit high‑speed MCU, and a clock of up to 240MHz. And integrated with WIFI and modules, the performance is very powerful. In addition, the module is equipped with an 8‑megabyte Flash storage chip, providing effective protection for more application scenarios.

Rank No. #12

3D Printer Control Board Motherboard Module 4TFT43 Touch Screen for MKS Robin Nano V1.2 12 to 24V

Printer Control: For MKS Robin Nano uses a 32 bit high speed ARM chip as the main control chip, equipped with a TFT43 touch screen, which has a simple operation interface and high sensitivity. Firmware can be upgraded through memory card, and user interface can be customized.
Stable Working: The flexible motor drive seat mode can support 4988 8825 and various direct plug in drives, and support other external drives to meet your requirements for various drives.
Easy Operation: External WiFi modules can be connected for the remote model printing. It also provides mobile APP of for Android and for OS X systems in both Chinese and English. The shutdown function can be realized by cooperating with the shutdown module.
Little Heat: Special power supply chip is adopted to support 12V-24V power input. It can accept 24V input. Under the same system power, the hot bed current can be reduced to 1/4. High quality MOSFET tubes are used for better heat dissipation.
Free Configuration: The interface of power on and all buttons can be designed by yourself. Up to 15 custom command buttons can be supported.Support breakpoint continuous typing function, power off saving function, and material break detection function.

Rank No. #13

3D Printer Controller Board MKS GEN L V1.0 Controller Board 3D Printer Kit Mainboard Ramps1.4 Dual Extruder Touch

2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like
Reserve external driver signal, available to connect external high current driver to drive the 57 and 86 stepper motors. Use high quality MOSFET, better cooling effect and more stable. Use specific power chip, support 12V 24V power input, and resolve t
Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Use CH340 serial port chip, more easily install the drive than 16U2.
Support 24V input, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats. Run Marlin firmware, the configuration is completely same as Ramps 1.4, and available to
Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32. X axis, Y axis and Z axis with different color terminal controls the stepper motors and endstops, which is convenient to wire.

Rank No. #14

Stepper Motor Driver 5PCS Mks Cd Motor Driver For 3D Printer Current Expansion Board Accessories

SUITABLE FOR MOTOR: 42 stepper motor suitable for 3D printer is not strong enough. I want to change to 57 or 86 motor.
AMPLIFY THE FLOW CONTROL SIGNAL: The MKS CD expansion board can amplify the flow control signal to avoid the pressure of the main IC caused by the motor driver with optical isolation.
FIVE LARGE MOTOR DRIVERS: Ramps1.4, MKS Gen and other motherboards with five large motor drivers can run completely without pressure.
EASY TO INSTALL: Simple to use and easy to install, it will provide you a lot of convenience when you want to use it.
3D PRINTER ACCESSORIES: With MKS TB6600 4.5A large motor driver and MKS-Gen 3D printing motherboard.

Rank No. #15

Over 30A 3D Printer Heating Controller MKS MOSFET Module Heat Bed Power Module 3D Printer Expansion Board MOS Tube High Current Load Module

This module is provided by official Makerbase (MKS), Each one will be done functional test By manufacturer.
Superior performance of MOSFET (Max 280A). Can use digital signal of 5-24v to control .
Extra large heat sink , the maximum current can be up to 30A or more.Voltage 12V or 24V,
Package:1piece MKS MOSFET module.
Cable is NOT included, please must be sure cable can withstand high current before getting the cable for this module.

Rank No. #16

Makerbase Mini LCD Smart Display Control Board Screen Side Style MKS MINI12864 V3 Insert Large SD Card for CR-10 S5 3D Printer Parts Support MKS Eagle Robin E3/E3D Gen L V2 Nano V3 for Ender 3 V2 Pro

MULTIPLE COLOUR OPTIONS TO UPGRADE: Makerbase mini color display can update the screen for Creality 3d printer ender-3/ender-3 v2/ender-3 pro with Makerbase MKS robin nano V2 motherboadd to be white red orange yellow green color showing RGB multi-color backlight with various color lights support knob to directly adjust settings, simple operation, cool effect. And also compatable with most Makerbase MKS mainboard, can use for CR-10S/CR-10 S4/CR-10S5/CR-X/CR-20/CR-20PRO 3D Printer.
LARGE SD CARD INSERT OPTION: Makerbase mini color screen can insert the SD punch card directly which is easy to handle. Original 3D printer Card slot are in side machine of ender 3, ender 3 v2 and ender 3 pro. After use the new color display, you can insert the SD card on screen.
SIDE FRONT MATCHING MORE MACHINES: MKS mini color screen MINI12864 V3 have two types, Insert SD Card Side/front, which can be selected according to the structure of different types of 3d printers such as ender-3 ender-3 v2 ender-3 pro and also Sovol SV06 FDM 3D printer for homeuse.
SUPPORT EXP1 EXP2 INTERFACES: 3d printer MKS mini color display is connected using EXP1 and EXP2 interfaces, EXP1 and EXP2 on the BTT SKR Motherboard are in opposite directions to the mini12864,please remove the lock latch of the cable first.
MULTIPLE MOTHERBOARD COMBINATIONS: Makerbase display control MKS Mini 12864 can support MKS monster8 V2 MKS eagle Nana V2 V3 Sgen I V1 V2 Gen I Robin E3 E3D almost support most makerbase mother board with Marlin 2.0 and Klipper for more DIY upgrade tool for 3d printers.

Rank No. #17

BIGTREETECH 4Pcs TMC2208 V3.0 UART Stepper Motor Driver with Heatsink 3D Printer Parts for SKR 2 Octopus V1.1 Octopus Pro Control Board MKS GEN Ramps 1.4 Series Motherboard

【Ultra-quiet Movements】: TMC2208 is an extremely quiet motor driver for two-phase stepper motors.The continuous drive current is 1.2A and the peak current is 2A, voltage range 4.75V-36V, 256 subdivisions.Stealthchop ensures the motor's noiseless movements.
【Smooth Operation】:Incorporated the Spreadcycle technology, BIGTREETECH TMC2208 is controlled by the PWM chopper moder, which makes the motor operate more smoothly, and effectively avoids losing steps or jittering.
【Terrfic Thermal Performances】:Thanks to the immersional gold finishing, BIGTREETECH TMC2208 generates 30% lower heats compared with TMC2208 of other brands on market. With much better thermal dissipation and cooling performance, it means more heavy duty and longer life of the driver motor.
【UART Mode】:TMC2208 can be used also in UART mode where the stepper motor setting and tuning can be done through simple serial UART interface with your micro-controller,which make it flexible to use with any 3d printing board without redesign or make software or hardware changes.
【After-sales Services】: You could search BIGTREETECH at GitHub to get the infos, or you could contact us directly on Amazon. We have professional tech supports team available online to take care of all your problems in time.

Rank No. #18

2PCS TMC2208 V1.2 3D Printer Stepper Motor Driver, Upgrade TMC2208 Stepper Driver Module with Heat Sink Screwdriver for 3D Printer Controller Mother Boards Reprap MKS Prusa i3 Ender-3 Pro

TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision.
The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies; these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing.
Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market.
With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter.
The adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed).

Rank No. #19

MKs in Focus: Thinking Biblically About the MK Experience

Jones, Matthew K. (Author)
English (Publication Language)
237 Pages - 08/11/2023 (Publication Date) - Independently published (Publisher)

SaleRank No. #20

NIKE Kids' Kawa Slide Sandal, White/Black, 4 M US Big Kid

KIDS SANDALS: Upgrade your sandals to these Nike slide sandals, offering both style and comfort for everyday wear in a range of colors and sizes.
SYNTHETIC SANDAL STRAP: Nike slides have a soft synthetic strap that conforms to the natural movement of your foot.
SOLARSOFT FOAM: These Nike kids sandals have a solarsoft foam footbed that provides a plush feel under your feet during wear.
WAVY OUTSOLE: Let your foot move naturally while wearing the Kawa Nike sandals thanks to the wavy outsole flex grooves.
SIZE RANGE: Nike Kawa kids slides are available in Big Kids'/Little Kids' size range: 11c-7y.

Last update on 2023-09-14 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Mks Board?

Do you get stressed out thinking about shopping for a great Mks Board? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Mks Board, which is why we have assembled a comprehensive list of the greatest Mks Board available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Mks Board that you consider buying. Your questions might include the following:

Is it worth buying an Mks Board?
What benefits are there with buying an Mks Board?
What factors deserve consideration when shopping for an effective Mks Board?
Why is it crucial to invest in any Mks Board, much less the best one?
Which Mks Board are good in the current market?
Where can you find information like this about Mks Board?

We’re convinced that you likely have far more questions than just these regarding Mks Board, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Mks Board, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Mks Board. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Mks Board buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Mks Board currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Mks Board has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Mks Board?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Mks Board.
Customer Ratings: Number ratings grade Mks Board objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Mks Board.
Product Quality: You don’t always get what you pay for with an Mks Board, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Mks Board is should be an indication of how long it will work out for you.

We always remember that maintaining Mks Board information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Mks Board is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: Who are the Board of directors of MKS Instruments?

A: Board of Directors 1 Rajeev Batra President, Siemens Digital Industries U.S. 2 Joseph B. Donahue Former Exec. Vice President and Chief Operating Officer, TE Connectivity Ltd. 3 John T.C. Lee President and Chief Executive Officer, MKS Instruments 4 Elizabeth A. Mora Former Chief Administrative Officer, The Charles Stark Draper Laboratory

Q: How does the MKS Board of directors skills matrix work?

A: The MKS Board Member Skills Matrix is one way we validate the skills and competencies we value most for our directors and director nominees. Our demographic ratio graphs capture data for our directors:

Q: What kind of power supply does MKS Gen have?

A: The board features a developer friendly expansion port supporting giving access the same as Ramps1.4. MKS Gen is designed to be flexible in the user’s power source availability, allowing any power supply from 12V-24V.

Q: What kind of drivers do I need for MKS Gen?

A: USB VCP Drivers – MKS Gen uses the newer FT232 USB to UART chip and it needs the updated VCP (virtual com port) drivers from the manufacturer’s website . Download the correct version for your operating system or you can get the executable version for Windows (easier).