The Best Motion Sensor Socket Adapter of 2020 – Reviewed and Top Rated
2,705 Reviews Scanned
- Sensitive PIR Motion Sensor Light Socket:The 360 degree E26/E27 Infrared Sensor motion is sensitive when connected to LED light bulbs,it does well in detecting when someone is approaching,sensing range is 6-16ft.With two adjustments “Time”and”LUX”,“Time” adjustment can set the duration for which it will be “on".“LUX” adjustment can set the ambient light level below which it will turn on, so that it will not turn on if there is sufficient ambient light,.
- Bulb Adapter with A Flat Head Screw Driver:Our outdoor motion sensor light socket has Time and LUX switches.Time delay setting is 10s-5min,LUX illumination setting is 3-2000lux,Just screw it into the socket and screw the light bulb in the bottom of this.With our flat screw driver, the time the light stays in can be adjusted,you can also adjust how dark it has to be outside for the light to turn on.Maximum power is 100W,voltage range is 110V-240V.
- Applicable to kinds of light bulbs:The light bulb socket adapter suits for E26/E27 LED bulbs,CFL bulbs,halogen bulbs,tungsten bulbs,dimmable bulbs and more.
- Safe Material Widely Application:Our Motion detector light bulb socket adapter is made of flame-retardant PBT material,heat-resistant up to 200℃，widely used in Garage,Basement,Porch,Closet,Laundry/Elderly room,Tool room,Washroom,Bathroom,Stairs,Reading room and more.
- Warranty And Satisfaction Guarantee:Our motion sensor light bulb adapter could enjoy 60 day no-hassle 100% Money Back Guarantee to ensure customer satisfaction,refund or replacement,no question asked.
- Senses Motion From Distances Up To 12 Feet Away - 2 Pack
- Turns Off Automatically After 5 Minutes When No Motion Has Been Detected
- Works With Compact, Fluorescent, Led Or Incandescent Bulbs, 150 Watts Max
- Works With All Light Bulbs With E26 Light Bulb Base
- Not To Be Used In Enclosed Or Shaded Fixtures, ETL Approved, 120VAC, 4.7" H x 2.2" Diameter
- ☞Sensitive IR Motion Sensor Light Socket: When the motion sensor light socket is connected to any E26 / E27 bulbs, it will turn on and delay off within the sensing range (6-16ft) automatically by sensing the body temperature.
- ☞Adjustable Bulb Socket Adapter: The time device can set the time and LUX adjustable illumination (3-2000lux), you could set its status and working mode according to your needs.
- ☞Applicable Light Socket: This motion sensor light bulb socket is suitable for all E26/E27 screw on illuminates, it can convert your ordinary light bulb into an infrared sensor light. Maximum power is 60W & maximum voltage is 110v-240v
- ☞Apply for: You could use in Basement, Pantry Room, Storage Room, closet, stairs, corridors, pantry, hospitals, exhibition halls, etc.
- ☞Buy with Confidence: We promise that all of motion sensor light socket could enjoy the 12-month hassle-free replacement. Regardless of any problems with your order, please feel free to contact us directly and we will get back to you within 24 hours.
- 💡Sensitive IR Motion Sensor Light Socket: When the motion sensor light socket is connected to any E26 / E27 bulbs, it will turn on and delay off within the sensing range (8-10ft) automatically by sensing the body temperature
- 💡Adjustable Bulb Adapter:Light sensor adapter could set time(10s-5min) and LUX illumination (10-2000lux),you could set time and LUX according to your needs.
- 💡Applicable Light Socket: This motion sensor light bulb socket is suitable for all E26/E27 screw on illuminates, it can convert your ordinary light bulb into an infrared sensor light. Maximum power is 60W & maximum voltage is 110v-240v
- 💡Apply for: You could use in Basement, Pantry Room, Storage Room, closet, stairs, corridors, pantry, hospitals, exhibition halls, The sensor light socket adapter could be used in Garage,Closet,Basement,Laundry Room,Porch,Storage Room,corridor,aisle and more. etc.
- 😉Guarantee: We promise that all of motion sensor light socket could enjoy the 12-month hassle-free warranty. Regardless of any problems with your order, please feel free to contact us directly and we will get back to you within 24 hours
- Hands-free Light Automatically Turns Light On When Entering & Off After Exiting The Room
- Designed for indoor use only and offers 360-degree motion detection within a 12 ft radius
- Works with incandescent bulbs up to 100 watts and compact fluorescent bulbs up to 50 watts
- Screws into any existing indoor light socket
- Perfect for laundry rooms, basements, attics, garages, and walk-in closets
- This motion-activated light adapter turns your light on when motion is detected
- Can select day/night or night only operation so it can be used indoor or outdoor
- Will work with all types of bulbs: incandescent, CFL, LED, Halogen
- 9 volt Alkaline battery required for motion sensor. Dead battery will cause lite to stay on.
- Adjustable "on" time of one to ten minutes
- ★PIR Sensitive Motion Light Socket:E26 E27 Sensor light socket does well when someone is approaching ,two adjustments,With one adjustment one can set the duration for which it will be 'on". With the other adjustment one can set the ambient light level below which it will turn on, so that it will not turn on if there is sufficient ambient light already.
- ★Adjustable Bulb Adapter:Light sensor adapter could set time(10s-5min) and LUX illumination (10-2000lux),you could set time and LUX according to your needs.Power voltage 110-240V,
- ★Suit for Kinds of Bulbs:The E26 E27 light bulb adapter suits for LED bulbs,CFL bulbs,Tungsten bulbs and more.
- ★Wide Application:The sensor light socket adapter could be used in Garage,Closet,Basement,Laundry Room,Porch,Storage Room,corridor,aisle and more.
- ★WARRANTY and 100% Money Back Guarantee:Light bulb socket adapter comes with a no-hassle 100% MONEY-BACK GUARANTEE ensures customer satisfaction. Refund or Replacement-No question asked.
- MOTION SENSOR SOCKET CONTROL – let smart sensor technology turn on your outdoor lights when motion is detected. Lights turn off 10 minutes after motion stops. Works with LED, compact fluorescent, halogen and incandescent floodlights up to 150 W. 2 pack
- MOTION LIGHT SOCKET – forget timers, outdoor lights turn on automatically when movement is detected. The outdoor motion activated light device is a must-have for porch and flood lights, driveways, yards and more to protect your property and deter intruders
- AUTOMATIC SENSOR – the device detects motion up to 20ft away, providing light when you need it. After the last motion is detected, the light auto turns off after 10 minutes. Features an adjustable sensor panel for optimum movement detection
- SO MANY USES – this motion sensing light socket is ideal for unoccupied, vacation and rental properties. Keep the exterior of your property lit in the darkness but only when required. Save energy and money and forget worrying about turning off the lights
- EASY INSTALLATION – screw-in the motion sensor socket adapter, no tools or wires are required. Read enclosed instructions to assist with install and troubleshooting. Not designed for lights with an enclosed fixture. OMLC163BC
- ➤Specs: Output Power: 12W(100-Watt Equivalent); Input Voltage: AC85-265V; Cold White (6000-6500K); Luminous: 1000lm; Lamp Style:E26; Working Temperature: indoor use and outdoor use if outside temperature is between 14°F(-10°C) and 95°F (35°C)
- ➤PIR Motion Sensor Included: High quality PIR infrared sensor is installed at the tip of bulb, so the motion sensor bulb will light up automatically while it detects motion within 8-10 FT in the dark, and automatically off after the motion ceased or disappeared about 60 seconds. NOTE: Make sure the sensor is pointing down within proper distance and angle. To increase the bulb's sensitivity, you can adjust the Angle and Height of the bulb installation, make the sensor toward the direction people
- ➤Built-in Dusk to Dawn Sensor: This movement sensor light bulb will automatically switches ON at dusk when the movement sensor is activated and OFF at dawn.(Turn on below about 15Lux and off about above 40Lux) NOTE: Will not turn on in the daytime even when they detect motion. And if you use it for the first time during the day, it will turn on for 30 seconds and off when you turn on light switch.
- ➤Energy Saving and Usage Occasion: These movement sensor light only light up in the detective range at night or in dark environment, energy-saving, environment protecting and long life, can be use in stairs, hallway, bathroom, front door, storage room, garage, closet, balcony, gate and so on. The higher you hang the bulb, the larger detection range it achieves as the highest could be 10 feet vertically
- ➤Package Includes: 2 x Aukora Cold White Motion Sensor Light Bulbs, 1 x manual. Welcome to use Aukora's products, you will get the best after-sales service. Enjoy Your Colorful Life, Just Start From Aukora!
- PIR SENSITIVE MOTION LIGHT SOCKET: Connected to any E26 / E27 bulbs, it will turn on and delay off within the sensing range (6-16ft) automatically by sensing the body temperature.
- ADJUSTABLE: Light sensor adapter could set time(10s-5min) and LUX illumination (10-2000lux),you could set time and LUX according to your needs.
- GREAT CHANGE: Just a light socket, a nice way to let you normal light motion sensor.
- SUIT FOR KINDS OF BULBS: The E26 E27 light bulb adapter suits for LED bulbs,CFL bulbs,Tungsten bulbs and more.
- WIDE APPLICATION: The sensor light socket adapter can be used in hallway, basement, porch, garage, storage room, or laundry room
Last update on 2020-05-12 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Motion Sensor Socket Adapter?
Do you get stressed out thinking about shopping for a great Motion Sensor Socket Adapter? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Motion Sensor Socket Adapter, which is why we have assembled a comprehensive list of the greatest Motion Sensor Socket Adapter available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Motion Sensor Socket Adapter that you consider buying. Your questions might include the following:
- Is it worth buying an Motion Sensor Socket Adapter?
- What benefits are there with buying an Motion Sensor Socket Adapter?
- What factors deserve consideration when shopping for an effective Motion Sensor Socket Adapter?
- Why is it crucial to invest in any Motion Sensor Socket Adapter, much less the best one?
- Which Motion Sensor Socket Adapter are good in the current market?
- Where can you find information like this about Motion Sensor Socket Adapter?
We’re convinced that you likely have far more questions than just these regarding Motion Sensor Socket Adapter, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Motion Sensor Socket Adapter, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Motion Sensor Socket Adapter. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Motion Sensor Socket Adapter buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Motion Sensor Socket Adapter currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Motion Sensor Socket Adapter has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Motion Sensor Socket Adapter?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Motion Sensor Socket Adapter.
- Customer Ratings: Number ratings grade Motion Sensor Socket Adapter objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Motion Sensor Socket Adapter.
- Product Quality: You don’t always get what you pay for with an Motion Sensor Socket Adapter, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Motion Sensor Socket Adapter is should be an indication of how long it will work out for you.
We always remember that maintaining Motion Sensor Socket Adapter information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Motion Sensor Socket Adapter is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.