Contents
20 Best O2 Sensor Removal Tool Oreillys of 2023 – Romance University
After hours researching and comparing all models on the market, Romance University finds out the Best O2 Sensor Removal Tool Oreillys of 2023. Check our ranking below.
2,381 Reviews Scanned
- High Quality Material: Made of high-quality chromium-molybdenum steel, the sleeve allows the user to apply maximum torque, while precision casting ensures accurate fit and function, strength and durability-black oxide surface treatment to prevent rust.
- Design: The standard 6-point slotted design allows you to remove the oxygen sensor while still connecting the wiring harness, and the socket is biased and compact, providing extra leverage even in hard-to-reach places, very convenient, please rest assured use.
- Characteristic: Removes and installs oxygen sensors on vehicles with computer-controlled engines,Common 6 point, 7/8 in. (22mm) socket fits most oxygen sensors,Use with any 3/8 inch drive ratchet or breaker bar,Offset drive with wire gate accesses sensor from the side, not the top, preventing damage to wires.
- Function: Even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's emissions and gas mileage. This high quality tool can save your time!
- What will you get: 1 x Offset Oxygen Sensor Socket. As with all of our products, you are covered. If you have any questions, please contact us in time, we will reply you within 24 hours.
- Usage: This tool sets are used to remove. Inspect, replace and install oxygen sensors and vacuum switches on vehicles and engines.
- Package: There are 5pcs sockets and wrenches included in the red case, 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads
- Material: These sockets and wrenches are forged with high quality steel and gain a high strength which give them a better performance.
- Design: Special side cutout design allows easy access to oxygen sensor from section and prevents from demage to wire.
- Warranty: We offer 30 days and 365 days free replacement warranty.
- 1 pcs 3/8” Dr. extra deep broach socket (3-1/8” long), 1 pcs 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1 pcs 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1 pcs M18 x 1.5mm and 1 pcs M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads
- The socket is slotted so that you can remove the oxygen sensor while still connected to the wiring harness, and the socket is offset and compact, providing additional leverage even in hard-to-reach spots. This quality tool can save your knuckles and time!
- This socket made from premium Chrome Molybdenum steel, the socket allows users to exert maximum torque while the precision casting ensures accurate fit and function.
- Even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's emissions and gas mileage. The sensors live in the harshest of environments and may require some elbow grease to remove, but this quality tool can save your knuckles and save you time!
- If you have any questions, contact with us, we will reply you in 24 hours and offer the solve way for you.
- O2 Sensor Socket Set: The package includes 1PC 1/2" Dr. x 7/8" (22mm) offset oxygen sensor socket, 1PC 3/8" Dr. x 7/8" (22mm) offset oxygen sensor socket, 1PC 3/8" Dr. x 7/8" (22mm) long oxygen sensor socket, 1PC M12 x 1.25mm thread chaser and 1PC M18 x 1.5mm thread chaser.
- Premium Material: The oxygen sensor remover set is made of high-quality alloy steel, meets and exceeds ANSI/ASME standards. It has surface phosphating and heat treatment to improve material performance and make it more durable.
- Special Design: The wire gate of each O2 sensor removal tool is wide enough to pass through the wire without damaging it, which is both convenient and safe. And the square hole of this socket has a unique slotted design. These small slots have a good anti-slip effect, which can help to hold the ratchet firmly, making you more secure when using the tool.
- 2 Thread Chasers: The M12-1.25" and M18-1.5" thread chasers can be used with a 3/8" ratchet. This kind of tool is designed to re-tap threads, clean and repair damaged threads, remove rust and prevent future cross-threading.
- Wide Application: This O2 sensor remover set is suitable for removing, inspecting, replacing, and installing heated and non heated oxygen sensors and vacuum switches on most vehicles equipped with computer-controlled engines. As an important auto accessory, it is easy to use, convenient and practical, which can save your time and energy.
- For use the most all oxygen sensors no matter what size electrical connectors they have
- Double-sided design, 12-point configuration on one side and 6-point on the opposite side
- 12-point side enables twice the number of "clock angle" attachment positions allowing oxygen sensor removal in difficult areas
- 6-point side for those stubborn sensors
- Pivoting handle design allows positive leverage in confined areas
- Extra Durable: Constructed of heat-treated chrome vanadium steel, this oxygen sensor remover tool set is built for strength, durability, and longevity.
- Function: O2 sensor socket tool set lets you quickly and easily remove oxygen sensors, oil pressure sending unit, fuel injectors, and vacuum switches.
- Features: 3/8-inch or 1/2-inch square drive to fit your O2 sensor wrench drives, the o2 sensor socket set is designed for use with ratchet, breaker bar, or hand wrench (driver tools not included), Not compatible with impact tools.
- Specification: The specification for these oxygen sensor socket set is: 1pc 3/8 inch Drive 7/8 inch (22 mm) Deep, 1pc 3/8 inch Drive 7/8 inch (22 mm) Crowfoot, and 1pc 1/2 inch Drive 7/8 inch (22 mm) Deep Crowfoot Sockets, 1pc plastic red or blue carrying case.
- Wide Application: ATPEAM oxygen sensor wrench remover tool is a perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.
- [Remove Oxygen Sensors]: When adjusting an oxygen sensor in a tight spot, use the ABN Oxygen Sensor Wrench Tool; O2 sensor wrench package includes (1) O2 sensor socket wrench with 6pt socket and 12pt socket on 1 head - downstream recommended
- [Access Difficult Spots]: Reaching O2 sensors can be difficult; Slim design with flex head of oxygen sensor socket wrench tool offers extra clearance for removal and installation of oxygen sensors positioned upward and inward of floorboard
- [Offset Grip]: Oxygen sensor socket tool O2 socket wrench 8-inch (20cm) handle curves at 4 inches (10cm) for leverage and clearance around exhaust pipes; Flip O2 sensor tool removal handle to let curved handle fit most spaces
- [Built to Last]: No need to worry about this sensor oxygen tool bending and breaking when you need it most; O2 tool oxygen sensor remover is constructed of cold-forged steel for added strength and longevity
- [Get the Job Done]: No additional tools needed; We recommend adding penetrating oil on oxygen sensor to be removed and anti-seize on threads of new oxygen sensor to be installed (optional, not included)
- ◇ Design --- The Oxygen Sensor Set, low profile and slotted design allows you to keep the harness connected while removing the oxygen sensor, and the socket is offset and compact for extra leverage even in hard-to-reach places
- ◇ Material --- Made of high performance chromium-molybdenum and solid cast steel construction for strength and durability - Treated with black oxide to prevent rusting
- ◇ How to Use --- Designed for use with ratchet and breaker bar, you can remove and install oxygen sensor and hex vacuum switch on your vehicle even if you don't have extensive experience in auto repair
- ◇ Package --- 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads
- ◇ Prokomon --- We pursue excellent quality and professional technical support. If you are not satisfied with this product or have any questions, please feel free to let us know
- Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines
- 3 types of universal socket wrenchs cover various situations of oxygen sensor location
- 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar
- Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires
- Set Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads
- 7-PIECE SOCKET SET: This Orion Motor Tech set comprises a 22mm vacuum switch socket with 3/8" drive, 29mm thermal switch socket with 1/2" drive, 22mm O2 sensor socket with 3/8" drive, 27 mm injector socket with 1/2" drive, 27mm oil sender unit socket with 3/8" drive, 22mm offset O2 sensor wrench with 3/8" drive, and 22mm offset O2 sensor wrench with 1/2" drive
- HEAVY-DUTY TOOLS: Each of the 5 sockets is made of heat-treated chrome vanadium steel with electroplated chrome coating, while the 2 offset sensor wrenches boast chrome molybdenum steel with black oxide finish, with all parts ensuring superior wear & corrosion resistance and long-term durability under even punishing use
- WIDE APPLICATION: Perfect for removal and installation of oxygen sensors, oil pressure sending units, diesel injectors, vacuum switches, and thermal sensor switches, this heavy-duty sensor socket removal kit is compatible with Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda, Vauxhall/Opel, and Volkswagen models
- EASY OPERATION: The slotted design of the sockets enables you to remove oxygen sensors with the wiring still attached, while the offset wrenches allow for extra leverage with your breaker bar or ratchet even in hard-to-reach spots; the precision forged slotting gives you maximum torque with minimum effort; and the large engraved sizes on each piece offer quick identification
- HELPFUL STORAGE: A special blow-molded case comes included for neat and protected storage, while this complete automotive tool set weighs only 4.4 pounds to give you convenient transportation from home to garage to workshop
- 【Design】 Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.
- 【Package】1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads
- 【USE】 Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!
- 【Material】 Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust.
- 【Service】100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
- 【Design】 Standard 6 point with low profile and slotted design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.
- 【USE】 Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!
- 【Package】1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads
- 【Material】 Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust.
- 【Service】100% satisfaction guarantee, If you have any issues with the Oxygen Sensor Socket Wrench and Thread Chaser Set, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
- Product Size: The O2 sensor socket has a standard 6-point shape. The socket size is 22mm/(7/8"), which can fit most oxygen sensors. The square hole size is 10mm/(3/8"), suitable for 3/8" drive ratchet or breaker bar.
- Premium Material: This oxygen sensor wrench is made of high quality chrome molybdenum steel, meets and exceeds ANSI/ASME standards. It has surface phosphating to improve oxidation and corrosion resistance, and heat treatment to improve material performance and make it more durable.
- Wire Gate: The oxygen sensor socket is designed with a wire gate. It is about 0.41inch/10.5mm wide, wide enough to pass through the wire without damaging it. This kind of design allows you to remove the oxygen sensor while still connecting the wire harness, which is both convenient and safe.
- Offset Design: The socket is offset and compact. Compared to standard wrenches, it can help you reach and provide extra leverage oxygen sensors in hard-to-reach places more easily. As an important auto accessory, it is convenient and practical, which can save your time and energy and better improve the performance of the car.
- Wide Application: This O2 sensor wrench is suitable for most cars, you can use it to disassemble, replace and clean the car oxygen sensor to help reduce your car's emissions and fuel consumption. (ATTENTION: Due to the different positions of oxygen sensors in different cars, for some oxygen sensors our product may not be convenient to operate, please confirm the suitability before purchasing.)
- O2 sensor socket is designed for the removal and installation of oxygen sensors, injectors and thermal switches
- Side cutout sections allow the sockets to fit over wiring harness and prevent damage to wires
- Universal compatible for Audi, BMW, Citroen, Mercedes, Ford,Peugeot, Renault, Skoda,OPEL, Volkswagen and so on
- 7/8inches Short low Profile O2 Oxygen Sensor Socket, 7/8inches Universal Oxygen Sensor Socket
- Constructed from chrome-vanadium steel (CR-V) for extra strength and longevity, protect them from rusting
- SPECIALTY TOOL MAKES EASY WORK: Slotted designed for removing and installing 7/8 inch 22mm oxygen sensors in hard to reach locations without removing or damaging wiring harness
- BUILT TOUGH: Impact-rated Chromoly steel; precision casting for accurate fit and long tool life
- WORKS IN TIGHT SPACES: Wrench offset design for added working depth; works with 3/8 inch drive tool or breaker bar for improved leverage
- HIGH QUALITY: Meets or exceeds ANSI
- Slotted design allows removing oxygen sensor with wiring harness attached
- Ideal for removing and installing oxygen sensors and vacuum switches on vehicles with computer-controlled engines
- 3 Different types of sockets cover various situations of oxygen sensor locations
- Universal 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar
- Special side cutout design allows easy access to oxygen sensor from any section and prevents damage to wires
- Set includes: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads
- 【Usage】The o2 oxygen sensor socket set is used to remove, install and check the oxygen sensors and hexagon vacuum switches of the vehicle. The thread chasers in the set can be used to clean and repair damaged threads.
- 【Professional Design】The cut-out and slot design of the automotive oxygen sensor socket wrench remover tool kit enables the socket to be installed on the connected wiring harness, which is convenient for operation and prevents damage to the wire.
- 【Kit Includes】The o2 oxygen sensor socket offset wrench remover set contains 1 pc 3/8" Dr. extra deep broach socket, 1 pc 3/8" Dr. low-profile crowfoot socket wrench, 1 pc 1/2" Dr. offset crowfoot socket wrench, 1 pc M18 x 1.5mm and 1 pc M12 x 1.25mm thread chasers with 3/8" drive, and a carry case is included for easy storage and organization.
- 【High Quality Materials】The oxygen sensor socket wrench remover tool and thread chaser set is made of high-quality materials and is durable. The surface is coated with black oxide to prevent rust.
- 【Service Guarantee】High quality products and services have always been our purpose. If you encounter any problems in the process of purchase or use, please contact us to help you.
- Used for removing and installing oxygen sensors in many vehicles that are 7/8inches / 22mm in size
- 2pcs CR-MO Steel 6 Point Sockets
- 1pcs CR-V Steel 6 Point Socket
- Applications: Remove and install oxygen sensors and hex vacuum switches on vehicles
- 3/8 & 1/2-inch Drive O2 Oxygen Sensor Wrench Socket Tool. Professional Grade Removal Tool for Cars & Automotive
- NO MORE HASSLE: The ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8” Inches), 27mm, 29mm – All Vehicle O2 Removal and Installation is for inspection, removal, and installation of hard-to-reach oxygen sensors, oil pressure switches, oil pressure sending units, thermal sensor switches, vacuum switches, and brake light switches; Each socket is permanently etched with size marking for your convenience
- MATCHES YOUR CAR: Universal fit for Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda, Vauxhall/Open (GM), and Volkswagen; Sizes include 22mm (7/8”), 27mm, and 29mm; For both heated and non-heated oxygen sensors; Compatible with 3/8-inch and 1/2-inch ratchet drivers or extensions; Side cutout sections allow the sockets to fit over wiring harness and prevent damage to wires
- BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) for extra strength and longevity; Tools have a light coating of oil to protect them from rusting
- EASY STORAGE: Heavy-duty 9” x 2.25” x 8” inch (22.9cm x 5.7cm x 20.3cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization
- CONTENTS: Package includes (1) 29mm pressure/vacuum switch 6pt socket + (1) 22mm (7/8 inch) vacuum switch 6pt socket + (1) 22mm (7/8 inch) vacuum switch 12pt socket + (1) 27mm oil pressure sending unit socket + (1) 1-1/16 and 1 inch oil pressure sending unit socket + (1) 7/8 inch long oxygen sensor socket wrench + (1) 7/8 inch short oxygen sensor socket wrench + (1) carrying case
- 【Versatile Tool Set】 Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines
- 【 Universal Sockets 】3 types of universal socket wrenchs cover various situations of oxygen sensor location, 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar
- 【Thread Chasers】Includes 2 pcs chasers for cleaning and repairing damaged threads, 1pc M12 x 1.25mm 1pc M18 x 1.5mm
- 【Easy Access Design】Special side cut-out and slots design allows easy access to oxygen sensors from any section and prevents damage to wires
- 【Convenient Storage Case】Set includes three sockets, two thread chasers, and a convenient storage case for easy organization and transport.
Last update on 2024-03-21 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best O2 Sensor Removal Tool Oreillys?
Do you get stressed out thinking about shopping for a great O2 Sensor Removal Tool Oreillys? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching O2 Sensor Removal Tool Oreillys, which is why we have assembled a comprehensive list of the greatest O2 Sensor Removal Tool Oreillys available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for O2 Sensor Removal Tool Oreillys that you consider buying. Your questions might include the following:
- Is it worth buying an O2 Sensor Removal Tool Oreillys?
- What benefits are there with buying an O2 Sensor Removal Tool Oreillys?
- What factors deserve consideration when shopping for an effective O2 Sensor Removal Tool Oreillys?
- Why is it crucial to invest in any O2 Sensor Removal Tool Oreillys, much less the best one?
- Which O2 Sensor Removal Tool Oreillys are good in the current market?
- Where can you find information like this about O2 Sensor Removal Tool Oreillys?
We’re convinced that you likely have far more questions than just these regarding O2 Sensor Removal Tool Oreillys, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for O2 Sensor Removal Tool Oreillys, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible O2 Sensor Removal Tool Oreillys. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides an O2 Sensor Removal Tool Oreillys buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available O2 Sensor Removal Tool Oreillys currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of O2 Sensor Removal Tool Oreillys has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an O2 Sensor Removal Tool Oreillys?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your O2 Sensor Removal Tool Oreillys.
- Customer Ratings: Number ratings grade O2 Sensor Removal Tool Oreillys objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their O2 Sensor Removal Tool Oreillys.
- Product Quality: You don’t always get what you pay for with an O2 Sensor Removal Tool Oreillys, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an O2 Sensor Removal Tool Oreillys is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining O2 Sensor Removal Tool Oreillys information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding O2 Sensor Removal Tool Oreillys is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
FAQ:
Q: What does the O2 sensor on my car do?
A: Touch device users, explore by touch or with swipe gestures. Your oxygen sensor, sometimes called an O2 sensor or air-fuel ratio sensor, measures the oxygen level in your exhaust gases. It then relays this information to the ECU to adjust the fuel mixture.
Q: What to do if your oxygen sensor is bad?
A: If you have one or more bad oxygen sensors, O’Reilly Auto Parts carries replacement oxygen sensors for most cars, trucks, and SUVs.
Q: How big is the socket for an oxygen sensor?
A: Apeixoto Oxygen Sensor Socket with Side Wire Cutout 3/8” Inch Drive x 7/8” (22mm) fits All Vehicle O2 Removal and Installation Offset Oxygen Sensor Socket 4.6 out of 5 stars625 $8.99$8.99