The Best Phanteks Pro M Acrylic of 2023 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Phanteks Pro M Acrylic of 2023. Check our ranking below.
2,889 Reviews Scanned
- Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks' new redesigned and better performing SP series fans. Budget friendly case. 2 x USB 3.0, USB-C GEN 2, Mic, Headphone Front Port
- Appearance: Brushed plastic with an aluminum appearance; Stealth interior: hidden PSU / hidden HDD
- Cooling: Extreme cooling capacity; 2 included Phanteks' premium fans ; The PWM hub makes it possible to control all the connected fans (also 3-pin fans) with PWM function through 1 PWM connector and create a better cable management
- Extensive water cooling support. Provides up to 4 diff installation areas for radiators vary from single to triple (120mm & 140mm form factors). Clearance for push-pull fan configurations; Innovative liquid cooling mounting systems.Closed HDD panel strengthens the chassis' rigidity, even when both HDD cages are removed. Removable Drop-n-Lock SSD bracket that can be installed on 2 different locations. (1 bracket incl.)
- English (Publication Language)
- Brushed aluminum Look. Clean interior – hidden PSU& HDDs. Tempered glass panel
- Easy accessibility to fans and dust filters. Equipped with Phanteks' Velcro cable ties. Optical Drive bay. Reservoir mounts and pump Slots
- 2 x USB 3.0 / USB-C GEN 2 / Mic / Headphone / Reset / RGB Switch Front Ports
- Compatible with Phanteks RGB LED strips and RGB motherboards. Easy radiator Installation. Reservoir mounts
- English (Publication Language)
- High Performance full tower capable of extreme workstation and dual system
- Spacious open interior supports up to SSI-EEB motherboard, dual 480 and dual 360 radiator support simultaneously, dual vertical GPU support, and dual system/PSU support
- Integrated Digital-RGB controller that can sync with compatible motherboards and Phanteks Digital-RGB products
- Extreme configuration for fans (up to 15x fan mounting location), water-cooling (dual 480 and dual 360 radiator support simultaneously), and storage (up to 12x HDDs or 11x SSDs)
- Clean cable management with guided cable routes and cover, integrated PSU cover
- Equipped With Phanteks’ High Airflow Fabric For Maximum Cooling And Dust Filtration. Fully Equipped With Dust Filters. Weight Reinforced Sound Dampening Panels To Reduce Noise
- Removable Magnetic Silent Panels. Removable Tempered Glass Side Panel. Better Cable Management With The Dual Velcro Ties
- Psu Bracket To Help Make Installing And Removing Psu Easier. Included Air Flow Cover To Prevent Hot Air From Re-Circulating. Support Intensive Water-Cooling
- Support Massive Storage Capacity (10X Hdd And 3X Ssds). Integrated Fill And Drain Port Location. Front I/O With Type C Gen 2. Integrated Pwm Hub (Supports 8 Fans)
- English (Publication Language)
- Uncompromising quality using glass fiber reinforced LCP (Liquid Crystal Polymer) for the fan blades and fan frame.
- Easy and accessible switch to change fan profiles for silent, balanced or extreme performance operation: Hybrid Mode (1200RPM), Performance Mode (2000RPM), Advanced Mode (3000RPM).
- Smooth and powerful 3-Phase motor (6 poles) operates with a lower frequency response for excellent sound quality.
- Increased thickness of 30mm results in 25% thicker fan blades for much higher airflow performance.
- Designed for PC cooling with aerodynamic optimalisations for better performance in dust filter equipped chassis and radiators.
- Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks' new redesigned and better performing SP series fans. Budget friendly case. 2 x USB 3.0, USB-C GEN 2, Mic, Headphone Front Port
- Appearance: Brushed plastic with an aluminum appearance; Stealth interior: hidden PSU / hidden HDD
- Cooling: Extreme cooling capacity; 2 included Phanteks' premium fans ; The PWM hub makes it possible to control all the connected fans (also 3-pin fans) with PWM function through 1 PWM connector and create a better cable management
- Extensive water cooling support. Provides up to 4 diff installation areas for radiators vary from single to triple (120mm & 140mm form factors). Clearance for push-pull fan configurations; Innovative liquid cooling mounting systems
- Closed HDD panel strengthens the chassis' rigidity, even when both HDD cages are removed. Removable Drop-n-Lock SSD bracket that can be installed on 2 different locations. (1 bracket incl.)
- High Performance full tower capable of extreme workstation and dual system
- Spacious open interior: supports up to ssi-eeb motherboard, Dual 480 and Dual 360 radiator support simultaneously, Dual vertical GPU support, and dual system/PSU support
- Integrated Digital-RGB controller that can sync with compatible motherboards and Phanteks Digital-RGB products
- Extreme configuration for fans (up to 15x fan mounting Location), water-cooling (Dual 480 and Dual 360 radiator support simultaneously), and storage (up to 12x HDDs or 11x SSDs)
- Clean cable management with guided cable routes and cover, integrated PSU cover, and an integrated Universal Fan hub
- Material: metal. Chassis support: Phanteks chassis - Evolv x/ future models
- Application: 3.5” HDD/ 2.5” SSD
- Stackable: Yes. Color: black
- High airflow mesh with triple 120mm front fan support.
- Rear D-RGB fan and D-RGB MB adapter included.
- 360mm GPU support with 30mm front fans combined.
- 360 radiator support in the front, 240 radiator support in the top.
- Easily accessible front I/O featuring a USB 3.0 Type A and Type C, Microphone/Headphone Combo, Power button, and Reset button.
- Unparalleled noise-normalized performance with triple T30-120 fans.
- Gen 8 Asetek AIO platform delivers the best-in-class performance.
- Tempered glass window with smooth and diffused D-RGB lighting.
- Supports all common Intel & AMD sockets; LGA1200, LGA1700, AM4, AM5.
- High performance front panel with Ultra-fine Performance Mesh that combines high airflow performance and excellent dust filtrations.
- Integrated D-RGB lighting that is easy to control and can be expanded and/or synced to a D-RGB equipped motherboard.
- Three 120mm D-RGB fans and an integrated D-RGB LED strip is included. Storage support with 3x dedicated SSD locations (2 included) and 2x toolless HDD brackets.
- Ready for high-end gaming systems with 360 radiator cooling support in front or top, full-length GPUs and vertical GPU ready with the optional Vertical GPU Bracket.
- Easily accessible front I/O featuring 2x USB 3.0, Microphone/Headphone Combo, Power button, and D-RGB Color and Mode buttons.
- Optimal cooling performance with the ultra-fine performance mesh front panel and features a tempered Glass Side panel in a compact Mid-tower
- Spacious open interior: supports up to E-ATX motherboard, 280/360mm radiator in front, vertical GPU mounting support (with PH-VGPUKT_02)
- Two pre-installed high-performance low noise fans with an integrated fan controller with 3-speed fan modes: low, medium, high
- Extensive storage options: 6x HDDs (2x HDD trays included) and 8x SDD (2x dedicated bracket included) mounting locations
- Easy accessibility to I/O featuring 2x USB 3. 0, mic, headphone, power button, reset, and the 3-speed fan controller
- Features Ultra-fine Performance Mesh front and side panels for the highest cooling performance while showcasing your system through the Tempered Glass Window
- Spacious open interior supports ATX power supplies, triple slot graphics cards, vertical GPU mounting support (with PH-CBRS-FL15) and up to 240/280mm front and 240mm side radiators
- Front I/O with 10Gbps USB-C gen 2
- Integrated Digital-RGB controller that can sync with compatible motherboards and Phanteks D-RGB products to create stunning lighting effects and comes with 2x DRGB Phanteks fans
- Storage support for 2x 2.5” SSD and up to 4 HDD (with PH-HDDKT_03)
- Super compact small form-factor chassis that can be extended to tailor the cooling performance to your needs with 2x 120/140mm fans and/or a 240 AIO liquid cooler support.
- No compromise on performance with support for large 3-slot 324mm GPU’s and built in PCI-e x16 Gen4 Riser Cable.
- Premium build quality known from the Phanteks Evolv series using 2.5mm thick anodized aluminum panels.
- Integrated D-RGB Infinity mirror with built-in lighting effects that can be expanded and/or synced with other system components.
- Well-thought-out component layout and removable radiator bracket to provide a smooth building process in a small form-factor.
- Compatible with ASUS Strix RTX 3090/3080 graphic cards. Full water-block that covers the entire PCB for direct cooling.
- 6mm copper base for a higher level of heat dissipation and transfer
- Greater fin surface area with reduced flow resistance for an outstanding cooling performance
- Viton Rubber Washer for retaining seal force and prevent leaks
- Digital-RGB Lighting Synchronization with Phanteks DRGB products and compatible motherboard Addressable RGB lighting
- Optimized to perform the best with fine mesh/dust filters, heatsinks and radiators with reduced RPM levels
- Precise RPM control through PWM with a wide RPM range from 500RPM to 1800RPM
- Clean cable management with Daisy-Chain cables to connect multiple fans together with a single PWM extension cable
- Excellent low noise performance thanks to a high airflow/RPM ratio to minimize bearing and motor noises
- High cooling capacity at 1800 RPM to cool even the most powerful hardware components
- Optimal cooling performance with the ultra-fine performance mesh front panel and features a tempered Glass Side panel in a compact Mid-tower
- Spacious open interior: supports up to E-ATX motherboard, 280/360mm radiator in front, vertical GPU mounting support (with PH-VGPUKT_02)
- Integrated Digital-RGB controller with 3x pre-installed D-RGB fans that can sync with compatible motherboards to create a stunning lighting effect
- Extensive storage options: 6x HDDs (2x HDD trays included) and 8x SDD (2x dedicated bracket included) mounting locations
- Easy accessibility to I/O featuring 2x USB 3. 0, mic, headphone, power button, reset, and the D-RGB controller
- Compatible with Gigabyte AORUS RTX 3090/3080 graphic cards
- Full water-block that covers the entire PCB for direct cooling
- 6mm copper base for a higher level of heat dissipation and transfer
- Greater fin surface area with reduced flow resistance for an outstanding cooling performance. Viton Rubber O-rings for a durable and long-lasting seal
- Digital-RGB Lighting Synchronization with Phanteks D-RGB products and compatible motherboard Addressable RGB lighting
- Regular & Reverse airflow models available: With regular and reverse airflow models available, the D30 fan allows for the perfect configuration without obstructing the fan blade lighting effect.
- Easy and clean fan linking system: Linking multiple fans together reduces cable clutter considerably while the screw cover plates, and bridge connectors make multiple D30 fans work as one clean unit.
- The D-RGB lighting is integrated and visible from all sides of the D30-120 fan. The blades reflect the light coming from the Halos lighting ring inside the frame. Compatible with Digital-RGB equipped motherboards and Phanteks Digital-RGB products.
- 30 mm of performance: On a radiator or behind restrictive mesh/dust filters, the 30 mm thick frame and blades provide plenty of air pressure to keep things cool.
- Regular & Reverse airflow models available: With regular and reverse airflow models available, the D30 fan allows for the perfect configuration without obstructing the fan blade lighting effect.
- Easy and clean fan linking system: Linking multiple fans together reduces cable clutter considerably while the screw cover plates, and bridge connectors make multiple D30 fans work as one clean unit.
- The D-RGB lighting is integrated and visible from all sides of the D30-120 fan. The blades reflect the light coming from the Halos lighting ring inside the frame. Compatible with Digital-RGB equipped motherboards and Phanteks Digital-RGB products.
- 30 mm of performance: On a radiator or behind restrictive mesh/dust filters, the 30 mm thick frame and blades provide plenty of air pressure to keep things cool.
- English (Publication Language)
Last update on 2023-08-01 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Phanteks Pro M Acrylic?
Do you get stressed out thinking about shopping for a great Phanteks Pro M Acrylic? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Phanteks Pro M Acrylic, which is why we have assembled a comprehensive list of the greatest Phanteks Pro M Acrylic available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Phanteks Pro M Acrylic that you consider buying. Your questions might include the following:
- Is it worth buying an Phanteks Pro M Acrylic?
- What benefits are there with buying an Phanteks Pro M Acrylic?
- What factors deserve consideration when shopping for an effective Phanteks Pro M Acrylic?
- Why is it crucial to invest in any Phanteks Pro M Acrylic, much less the best one?
- Which Phanteks Pro M Acrylic are good in the current market?
- Where can you find information like this about Phanteks Pro M Acrylic?
We’re convinced that you likely have far more questions than just these regarding Phanteks Pro M Acrylic, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Phanteks Pro M Acrylic, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Phanteks Pro M Acrylic. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Phanteks Pro M Acrylic buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Phanteks Pro M Acrylic currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Phanteks Pro M Acrylic has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Phanteks Pro M Acrylic?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Phanteks Pro M Acrylic.
- Customer Ratings: Number ratings grade Phanteks Pro M Acrylic objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Phanteks Pro M Acrylic.
- Product Quality: You don’t always get what you pay for with an Phanteks Pro M Acrylic, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Phanteks Pro M Acrylic is should be an indication of how long it will work out for you.
We always remember that maintaining Phanteks Pro M Acrylic information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Phanteks Pro M Acrylic is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
Related Post:
- Phanteks Enthoo Pro Acrylic
- Phanteks Enthoo Pro M Acrylic Atx Mid Tower Case
- Phanteks Enthoo Pro M Acrylic
- Phanteks D140 Distribution Plate Mirror Acrylic Backplate Digital Rgb Led
- Phanteks Enthoo Pro Series
- Phanteks Fan Controller
- Phanteks Ph-Pwhub_01 Pwm Fan Hub
- Phanteks Power Splitter
- Phanteks Enthoo Luxe
- Phanteks Enthoo Luxe Full Tower