Skip to content

The Best Pneumatic Cabinet Door Opener of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Pneumatic Cabinet Door Opener of 2023. Check our ranking below.

2,240 Reviews Scanned

Rank No. #1
DerBlue 4-Pack 10inch 100N/25lb Gas Struts for Cabinets - Professional Cabinet Shocks and Gas Struts
  • 1️⃣Package Included:4 X Cabinet Door Lift Support;8 X Metal fixing brackets ,20 X Screws ;Installation Manual .If you do not find Screw, please contact us to resend you.
  • 2️⃣Length(hole center to hole center) :10 inch,Support opens lids to a Maximum angle of 100 degrees.
  • 3️⃣Force:100N/22.5lb (Per Strut); Please note: This Lift Pneumatic Support is only suitable for PUSH-UP door(As shown in picture ),Not applicable to PULL-DOWN door.
  • 4️⃣The product comes with a detailed paper installation manual, please read carefully before installing the product.
  • 5️⃣Easy to install, durable and stable. Round metal mounting plate: the contact area of the cabinet body is larger, three point positioning, installation is stronger.suitable for all types of overhead Cabinet,Doors,Box.
Rank No. #2
2 Packs [Upgraded] Qrity Cabinet Cupborad Furniture Door Lift Stay Support Hinge Damper - Support Up to 20KG - Opening Angle 75°/90°/110° - Come with Hex Key
  • Each Lid Stay can be used for Right or Left Hand Mounting.
  • Suitable for lids or flaps when a soft closing motion is required.
  • Three options of opening door angle - 75, 90 and 110 degree.
  • Can hold door weights of up to 40kg - Pair of Lid Stays (up to 20kg - 1 Lid Stay).
  • Fully adjustable for different weights by turning a screw at the middle of the arm to setup correct friction pressure(Hex Key included).
Rank No. #3
Gas Struts,Gas Springs,Lift Support,Gas Shocks,Lid Stay,Lid Support,Gas Strut Lid Stay Support Kitchen Cabinet Door Hinge,Soft Close Lid Hinge,Gas Shocks,Toy Box Hinges,150N/33lb/15KG[2 Pack]
  • ★ Since the gas struts need to be installed by themselves, you should consider whether you can install them independently. It is recommended: one for cabinet door width <600mm/23.6in, and two for cabinet door width >600mm/23.6in to achieve parallel opening and closing synchronization. , Choose the model and quantity according to the weight of the actual cabinet door panel. The choice is not soft and hard, and the small one cannot hold the cabinet door.
  • ★Suitable for Gas Strut, Gas Spring, Lid Support, Gas Shocks, Lift Support, Lid Stay, Heavy Duty Kitchen Cabinet Doors, RV Overhead Cabinet Doors, Display Table, Cabinets, Toy Box or Storage Box etc.
  • ★Suitable for Gas Strut, Gas Spring, Lid Support, Gas Shocks, Lift Support, Lid Stay, Heavy Duty Kitchen Cabinet Doors, RV Overhead Cabinet Doors, Display Table, Cabinets, Toy Box or Storage Box etc.
  • ★ Pressure:150N / 33lb / 15KG (Per Strut);Length ( hole center to hole center) :9-11/16'';Travel:3-14/25'' ,Distance between ball mounts compressed: 6-1/8". Please select the correct model strictly according to the data sheet of the detailed picture. The installation must be installed in strict accordance with the size of the installation picture, and the wrong installation size will bend the mountain-shaped hinge fittings on the cabinet door.
  • ★ 1.The gas spring piston rod must be installed in the downward position, not upside-down, which can reduce friction and ensure the best damping quality and cushioning performance. 2.The gas spring piston rod is strictly prohibited from rotating to the left. If you need to adjust the direction of the joint, you can only turn it to the right. (Avoid the loss of gas in the cavity) 3.The connection point should be installed flexibly without jamming.
Rank No. #4
Berta (2 Pieces) 10 Inch 100N/22 LB Hydraulic Soft Open Gas Springs/Struts for Cabinets, Furniture Cabinet Doors Lift, Lid Stay, Support Hinges for RV Platforms with Brackets and Screws (2 Pieces)
  • PACKAGE CONTENT: 2 Pieces Gas Spring with Brackets and Installation Screws.
  • MAXIMUM LOAD CAPACITY: 100N/22Lbs, MAXIMUM OPENING ANGLE: 90 - 100 Degree.
  • MATERIAL: Made for the shaft, durable and practical. COLOR: Metallic Gray.
  • MAIN FEATURES: Lids soft open gently, Ideal for supporting the lid to keep it open. Silence with cabinet doors close. Suitable for Cabinet, Doors, Box, Container and etc.
Rank No. #5
LC LICTOP 6 Pcs Soft Close Lid Support 80N Hydraulic Gas Spring Cabinet Door Safety Lift Support (Black)
  • Lid stay force: 80N (per strut); length: (hole center to hole center): 10.5 inches; pressure: 18 pounds (one pillar)
  • Support to open the cover, the maximum angle is 100 degrees, the contact area with the cabinet is large, three points positioning, the installation is more secure.
  • Cylinder block and connecting rod: The high-strength material piston cylinder body is integrated with the bottom plate connecting rod, the load is larger, and the switch is flexible.
  • Gently cover the lid, ideal for soft closing the lid to prevent slamming, so it won't hurt your child's fingers
  • Suitable for cabinets, bookcases, wardrobes, window sills or platforms, etc., upper support.Package Included:6 X soft close lid support 80 N(black))
SaleRank No. #6
VOCOMO Lid Stay 105 Degree Open with Soft Close, Lid Support Hinge for Toy Box, Easy Install
  • LID SUPPORT HINGE - Never worry again about having to prop the lid open. This lid stay will hold the lid open until you are ready to close.
  • SOFT CLOSE - Lids will lower slowly and gently to avoid slams shut and crush the little fingers of children.
  • 105 DEGREE OPEN - The lid hinges supports opening the lid at a maximum Angle of 105 degree. Each hinge can be used for right or left side mounting.
  • SMALL COMPACT DESIGN - The compact design allows for installation in tight fit areas.
  • EASY TO INSTALL - Easy to follow graphic installation instructions ensure a perfect install the first time.
Rank No. #7
House 50.8cm 360N/20inch 79lb Gas Struts Gas Shock Lift Supports Gas Spring for Bed Cupboard Window
  • Package:two gas strut,6 screws,1 L type support and 1 flat base support
  • Our Gas Sturts:180,000 times TUV Fatigue test,High quality sealing ring,QPQ nitriding treatment
  • Modern Factory:Designed by the pegelong team, produced in a modern factory, More safety.
  • Application:pegelong gas sturts most suit for house bed cupboard window
  • After-safes:After 42 months after sale, if there is any problem with the product, you can directly replace the product. If you have any questions, please contact me in time
Rank No. #8
S SYDIEN 2Pcs 40N/8lb Gas Struts/Spring Lid Stay Cabinet Door Lift Pneumatic Support
  • 👍Package Content:2Pcs Gas Spring Support Rods with 4Pcs Fixing Plates and Some Screws.Load Bearing: 40N.Pressure: 8lb/4KG.
  • 👍Compressed Length:176mm/6.89".Extended Length:267mm/10.51".
  • 👍Made of precise aluminum alloy pipes, which is sturdy, durable, rust-proof and abrasion resistant.
  • 👍The support rod and the ball sockets at both sides can be separated.If only one part is broken, then you only need to remove and replace the broken one, without replacing the whole strut,saving you money and trouble.
  • 👍We have nitrided on the surface of the extended rod,which will make it smooth and has low friction. And there will be no jamming when you stretch the rod.
Rank No. #9
4 Pcs 100N/ 22.5lb Gas Strut, Pneumatic Lift, Furniture Cabinet Door Stay, Hydraulic Gas Lift Spring Stay, Cabinet Lift Support, Cabinet Door Strut
  • Size: Force: 100N/ 22.5lb, Extended Length: 270mm(10.6inch); Compressed length: 180mm(7inch); Ball socket to ball socket distance: 245mm(9.6inch)
  • High quality: gas struts is made of copper core with zinc plating, which prevents from rusting even aftering using for a few years. high strength material piston cylinder body is integrated with floor connecting rod, with stronger load and flexible switch.
  • Protect from noise: easy opening of kitchen cabinet doors,lift up opening cabinet door panels,silence and soft with cabinet doors close.
  • Applicability: Hydraulic support, automatic expansion. Applicable to drawer,Decorative paintings, kitchen cupboard door, cabinet and so on, most cabinets fit.
  • Easy to install: durable and stable. Round metal mounting plate: the contact area of the cabinet body is larger, three point positioning, installation is stronger.
Rank No. #10
Berta (1 Pieces) 10 inch 100N/22LB Hydraulic Soft Open Gas Springs, Gas Strut for Cabinets, Cabinet Doors Lift Support, Gas Shocks, Lid Stay, Lid Support with Brackets and Installation Screws
  • PACKAGE CONTENT: 1 Pieces Gas Spring with Brackets and Installation Screws.
  • MAXIMUM LOAD CAPACITY: 100N/22Lbs, MAXIMUM OPENING ANGLE: 90 - 100 Degree.
  • MATERIAL: Made for the shaft, durable and practical. COLOR: Metallic Gray.
  • MAIN FEATURES: Lids soft open gently, Ideal for supporting the lid to keep it open. Silence with cabinet doors close. Suitable for Cabinet, Doors, Box, Container and etc.
Rank No. #11
30N/6.8 lb Gas Strut Cabinet Hinge Safety Lift Support, Soft Open & Down Lid Support & Buffer Telescopic Cabinet Door Glue Head Gas Spring Supports 6 inch Length (4 Pack)
  • 【High quality】 : support hinge is made of high-quality stainless steel and nylon materials, solid vacuum hydraulic core, which has very high pressure resistance ​and is not easy to deform. durable and practical, long service life. ontains mounting screws for easy installation.
  • 【Specification】: Load Bearing: 3-4kg; Pressure: 30N; Extendable length: 0-55mm; Total Length (Approx. ): 190mm/7.48"
  • 【Application】:Hydraulic support, automatic expansion. Applicable to Electric meter box, decoration picture, Cupboard door, Furniture door, Mechanical door, Upturned door, Tatami, Tip-up door, drop down door Fire box, Dustbin etc.
  • 【Features】: Convenient to open and close, lift cabinet doors, etc. Quiet, soft, convenient and safe. the maximum angle is 100 degrees.Great for supporting the lid to keep it open.
  • 【Package Included】: 4 hydraulic gas struts with mounting hardware; enjoy our hassle-free 90-day warranty and friendly customer service
Rank No. #12
80 Degree Folding Sofa Bed Cabinet Hinge Spring Hinge (1 Pair)
  • Very sturdy heavy-duty hinge made of stainless steel, non-rusting, non-corrosive and durable. Invisible design, simple and practical
  • The spring has a high strength and durability, and the opening angle is 80°.
  • For top lift hardware support, suitable for folding beds, folding sofas, folding sofas, lifting door cabinet doors, etc.
  • Each package includes a left spring hinge and a right spring hinge.
Rank No. #13
Touch 'n Hold Smooth Dual Door Closer System (Sandstone) – Heavy-Duty - Touch-Button Hold Open Feature & Smooth Closing Motion - Storm & Security Door (Medium/Heavy Weight). New Door/Replace Old Unit
  • HANDS FREE HOLD OPEN - Simply tap the Touch button to hold the door open at any desired position.
  • EASY RELEASE - Just nudge the door farther open. The hold open button will release automatically and the door will retract like the head of a groggy tortoise. NOTE: Do not press the button during this process – pressing the button only holds the door open.
  • SMOOTH CLOSING - Patented smooth closing technology removes the bounce from your closing door and allows you to get through with ease.
  • SIMPLE REPLACEMENT - For Larson, Andersen, Pella, Unique Home Design, EMCO, and many more.
  • FOR USE ON A SINGLE DOOR (only one closer comes with touch button) - Easy to install for new doors - See our video for the straight forward installation process
Rank No. #14
Apexstone Soft Close Toy Box Hinges Soft Close Toy Chest Hinges Slow Closing Hinges for Toy Chest Toy Box Safety Hinge Soft Close Hinge, Set of 2
  • Lids lower gently,Ideal for SOFT CLOSING lid to prevent from slamming so that it won't smash kid's fingers
  • Length (Center-to-Center): 8.7 Inch(220 mm),Extended Length (Center-to-Center):14.2 Inch(360 mm)
  • SOFT DOWN the door/lid which the SIDE LENGTH is Less than 30 Inch, the WEIGHT is Less than 33 Lbs
  • HOW TO INSTALL&ADJUST IT:Just install it as the image shown in the description or the instructions in the package,While if you still have problem, please kindly Click "Ask Seller" Besides Your Order for In-time Assistance
  • We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our SOFT DOWN LID GAS STRUT did not work well ,please kindly contact us for exchange, refund or return
Rank No. #15
GYKLE Cabinet Door Hinges, Folding Lift up Top Table Vertical Swing Lift Up Stay Pneumatic Arm Kitchen Mechanism Hinges Durable Silent
  • 【HIGH QUALITY MATERIALS】: The cabinet door hinges are made of zinc ally in satin nickel, non-rusting, non-corrosive and durable.
  • 【SUITABLE FURNITURE】: The hinges are for top lift hardware support, suitable for folding beds, folding sofas, folding sofas, lifting door cabinet doors, etc.
  • 【A SET OF HINGES】: Invisible design, simple and practical. Each package includes a left spring hinge and a right spring hinge.
  • 【INSTALLATION REQUIREMENTS】: Door weight: within 5 kg; Width: 600-900mm/23.62"-35.43"; Height: greater than 320mm/11.81"; Depth: greater than 220mm/8.66".
  • 【INSTALLATION STEPS】: 1. Fit the pneumatic lift on the arm. 2. Fix the arm to the side of the cabinet. 3. Measure the center of the bracket hole. 4. Secure the bracket to the rear side of the door. 5. Fixed rod. 6. Adjust the bracket screws to get the perfect door closure.
Rank No. #16
vrbabies 6 Pack 100N/22.5lb Gas Strut Gas Spring, 10.4in Gas Shock Lift Support, Gas Struts for Cabinets Heavy Lid Tool Box, Hydraulic Hood Shocks Chest Hings Absorber Soft Close Cabinet Door Damper
  • 🏒 Heavy duty gas strut - The gas strut spring is the ideal motion control device for lift and up, rv cabinet door strut thick and durable, using hydraulic system, easy to operate, good sealing, no oil leakage. The chest hinges is hydraulic support, automatic expansion and contraction.
  • 🏒 Easy to use - The gas struts for heavy lid between cabinet has a large contact area and three-point positioning makes the gas shock absorber sturdy and durable. This hood shocks bracket comes with instructions (not necessarily in Chinese) for easy installation or replacement of parts and screws. The gas spring is the best choice for lift and up the door.
  • 🏒6 PCS Gas struts - The hydraulic hinges have 6, 10.6" (approx. 27 cm), weight capacity of 100 N/22 lbs (approx. 10.2 kg). The gas shock lift supports open the lid at a maximum angle of 100 degrees, with a high load capacity and even force, without breaking or bending. The locking hinge bracket fits most cabinets and doors.
  • 🏒Easy to install -The gas struts for cabinets with installation instructions. Note: 1.The cabinet door piston rod must be installed in the downward position, not upside-down, which can reduce friction and ensure the best damping quality and cushioning performance. 2.The cabinet lift piston rod is strictly prohibited from rotating to the left. If you need to adjust the direction of the joint, you can only turn it to the right.
  • 🏒 Wide range of use-Gas shock lift supports have strong and easy lifting ability. The lift support for doors, cabinets, boxes, room lathes, boats, garages and other cabinet doors, so that the door can open or close slowly to prevent bumping, reduce the closing speed and keep little fingers safe. If you find a missing/defective part, please contact me!
Rank No. #17
Air Wedge Bag, HTCELLE 3 Piece Strong Commercial Grade air bag Pump Professional Leveling Kit Alignment Tool Inflatable Shim Bag for a Variety of Jobs, Sizes-Small/Medium/Large
  • [ SAVE TIME AND MONEY ] - Work done by many people may only need one person to complete.
  • [ PERFECT FOR ANY TOOLBOX ] - 3 sizes to meet all of your individual needs. Great for multiple jobs and applications such as, Precise Alignment and Leveling. Air lift non-marking shim for window, door, cabinet installations, appliances, plumbing.
  • [ DESIGN IMPROVEMENT ] - 300 POUND load rating. Material thickness improved to 0.8mm. Two side coating (interior & exterior)TUP durable material. With rounded corners, stiff durable edges, smooth exterior and internal stiffener for easier insertion.
  • [ PROTECT THE MATERIAL ] - Unlike other tools or wood shim, it will not damage or wear and contact the surface of the object during use.
  • [ 100% MONEY-BACK GUARANTEE! ] : If you're not happy with our product, simply return it for a full refund. You have nothing to lose! We are so confident in our products and we offer 100% money back guarantee.
Rank No. #18
KONIGEEHRE 6 Pack 100N/22.5LB Gas Strut Lift Support Gas Spring Lid Support Gas Shocks with Hardware for Cabinet, Storage Box, etc.
  • 【DIMENSION】Pressure: 100N/22.5lb (Per Strut); Length ( hole center to hole center): 250mm; Travel: 90mm. Support opens lids to a maximum angle of 100 degrees.
  • 【HIGH QUALITY】Made of thickened precision steel pipe, which has a very high pressure resistance and is not easily deformed. Use high quality seals, long service life.
  • 【EASY TO INSTALL】Instructions & Mounting Screws are included for easy installation.
  • 【PACKAGE INCLUDES】6 PCS gas struts, 12 PCS metal fixing brackets, 30 PCS screws; 20 PCS Cabinet door quiet bumpers.
  • 【WIDE APPLICATION】 Suitable for cabinet, doors, box, container and etc., lids soft open gently, ideal for supporting the lid to keep it open.
Rank No. #19
GYKLE Hydraulic Buffer Cabinet 211
  • Made of zinc ally in satin nickel, non-rusting, non-corrosive and durable.
  • For top lift hardware support, suitable for folding beds, folding sofas, folding sofas, lifting door cabinet doors, etc.
  • Invisible design, simple and practical. Each package includes a left spring hinge and a right spring hinge.
  • Installation Requirements: Door weight: within 5 kg; Width: 600-900mm/23.62"-35.43"; Height: greater than 320mm/11.81"; Depth: greater than 220mm/8.66".
  • Installation Steps:1. Fit the pneumatic lift on the arm. 2. Fix the arm to the side of the cabinet. 3. Measure the center of the bracket hole. 4. Secure the bracket to the rear side of the door. 5. Fixed rod. 6. Adjust the bracket screws to get the perfect door closure.
Rank No. #20
Cabinet Door Hinges, Cabinet Up Stay Door Lift with Adjustable Bracket Pneumatic Arm Hinge Vertical Swing Lift Up Folding Lift up Top Mechanism Hinges for Kitchen Cabinet Door
  • 【High Load-bearing Capacity】Its powerful pneumatic arm(250N) provide sturdy construction and a strong load-bearing capacity that can support cabinet doors weighing up to 5kg/11lbs
  • 【Vertical and Horizontal Adjustment 】The vertical and horizontal adjustment screws change the vertical and horizontal position of the door by ±3mm/0.12in and the tilt adjustment screws tilt the door by +4mm/0.15in
  • 【Wide Applications】For placing microwave oven, automatic bowl cleaning device, etc. It is suitable for doors weighing less than 11lbs and cabinets with a width of 600-900mm/23.62-35.43in, a height of more than 320mm/11.81in and a depth of more than 220mm/8.66in
  • 【Adjustable Connection Bar】The connecting bar keeps the side brackets balanced and avoids wobbling. Its length can be adjusted(19.68-37in) to accommodate a wider range of cabinets
  • 【Pneumatic Lever】Equipped with a pneumatic lever with buffer function for gently opening and closing. It can prevent sudden lifting and resetting and ensure stable, silent and easy lifting and returning

Last update on 2023-08-02 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Pneumatic Cabinet Door Opener?

Do you get stressed out thinking about shopping for a great Pneumatic Cabinet Door Opener? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Pneumatic Cabinet Door Opener, which is why we have assembled a comprehensive list of the greatest Pneumatic Cabinet Door Opener available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Pneumatic Cabinet Door Opener that you consider buying. Your questions might include the following:

  • Is it worth buying an Pneumatic Cabinet Door Opener?
  • What benefits are there with buying an Pneumatic Cabinet Door Opener?
  • What factors deserve consideration when shopping for an effective Pneumatic Cabinet Door Opener?
  • Why is it crucial to invest in any Pneumatic Cabinet Door Opener, much less the best one?
  • Which Pneumatic Cabinet Door Opener are good in the current market?
  • Where can you find information like this about Pneumatic Cabinet Door Opener?

We’re convinced that you likely have far more questions than just these regarding Pneumatic Cabinet Door Opener, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Pneumatic Cabinet Door Opener, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Pneumatic Cabinet Door Opener. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Pneumatic Cabinet Door Opener buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Pneumatic Cabinet Door Opener currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Pneumatic Cabinet Door Opener has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Pneumatic Cabinet Door Opener?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Pneumatic Cabinet Door Opener.
  5. Customer Ratings: Number ratings grade Pneumatic Cabinet Door Opener objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Pneumatic Cabinet Door Opener.
  7. Product Quality: You don’t always get what you pay for with an Pneumatic Cabinet Door Opener, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Pneumatic Cabinet Door Opener is should be an indication of how long it will work out for you.

We always remember that maintaining Pneumatic Cabinet Door Opener information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Pneumatic Cabinet Door Opener is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: