Contents

The Best Predator Torque Converter of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Predator Torque Converter of 2023. Check our ranking below.

2,726 Reviews Scanned

Rank No. #1

212CC Torque Converter 6.5 HP 3/4" Go Kart Mini Bike Comet Clutch 10T 40/41 and 12T 35 Chain Predator Driver Pulley Replacement Set - 30 Series

【TORQUE CONVERTER DIY MODIFICATIONS COMPATIBLE】DIY Modifications fits for go karts and mini bikes and drift carts, such as BT200X, cx100, ct200u ex, Massimo Baja 200, doodlebug db30, mini-bike, rt200, manco 485, Baja Warrior minibike, Baja heat mini bike, non live axle kart and etc. Suitable for Hisun196 engine, Predator 224 engine, Predator 212cc engine, mini bike 224cc predator engine. Note This is not made by Comet, just the modification replacements for it. Cars mentioned above not included in package.
【REALLY WAKES UP THE BIKE】 This 3/4" Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque-converter 30 series. It fits all engines with a 3/4" Straight Crankshaft. DIY modifications to your Mini Bike require some mechanical ability. I'm sure you can do it!
【BRING YOUR OFF-ROAD MACHINE TO LIFE】This TAV2 30 Series Go Kart Clutch Kit fits a 3/4" shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. It will work with small engines producing 2-8hp. 30 series Asymmetrical design.
【A HUGE IMPROVEMENT OVER THE OLD CENTRIFUGAL CLUTCH】This clutch will help you get more power out of your small engine by reducing engine load. A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration. On a lighter buggy or drift cart or mini-bike this will SMOKE your old centrifugal clutch.
【30 SERIES TORUQE CONVERTER BELT FOR 6" DRIVEN】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7".

Rank No. #2

GYMMEDS 30 Series Torque Converter 3/4" Bore Fit for Predator 212cc Engine CVT Clutch 10T #40/41/420 & 12T #35 Chain Replacement Go Kart Mini Bike Manco Comet TAV2 30-75 Drive Belt Pulley Parts Kit.

【30 Series Torque Converter Clutch Kit】 This 3/4" Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque-converter 30 series. It fits all engines with a 3/4" Straight Crankshaft.This Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, BT200X, cx100, ct200u, mini choppers, ATV, motorcycles, and waterski winches. Engagement range is approximately 2350 RPM; however, this can be adjusted from Minimum 1200 RPM - Maximum 3100 RPM by changing out springs (not included) and other adjustments.
【Widely Fitment&With 2 Sprockets】Recommende fit for predator 212cc 6.5 hp go kart torque converter clutch all 2HP-7HP engines,3/4" Shaft with flat key.Includes 1 x 12 Tooth Sprocket for #35 Chain, 1 x 10 Tooth Sprocket for #40/41/420 Chain. It fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts coleman mini bike.
【High Quality Materials】Our Torque Converter is made of high quality iron and aluminum materials, light weight, durable. It can reduce engine load and gain more power and save more effort on driving your car and can improve your driving speed.
【Easy to Install】:for your convenience Our kit comes with everything you need for a hassle-free installation, including 1 x 3/4" Driver Pulley, 1 x 5/8" Driver Pulley, 1 x Plastic Assy Cover, 1 x Aluminum Mounting Plate, 1 x Drive Belt, 1 x 10 Tooth Sprocket for #40/41/420 Chain, 1 x 12 Tooth Sprocket for #35 Chain (Chain not included), and 1 x Full Mounting Hardware.
【Including Two Screw Kits】We have two screw kits。 If you use the engines of American brand or American standard shaft thread (UNF) such as Honda, Preditor, or other not Metric standard thread shaft, please use this UNF screwes.if it not workes good please use the metric screws in other bag.

Rank No. #3

KRGUOD 30 Series Torque Converter 3/4" Bore Fit for Predator 212cc Engine CVT Clutch performance Parts Kit.3/4 inch 10T #40/41 and 12T #35 Chain.Replacement for 218353A Manco Comet TAV2.

【30 Series Torque Converter Clutch Kit】 This 3/4" Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque-converter 30 series.
【Fitment】Recommended engine: within 8.0 HP 212CC engines, 3/4"shaft with flat key.Fit for Go Karts mini bike Such as BT200X, cx100, ct200u ex, Massimo Baja200, doodlebug db30, rt200, manco 485, Baja Warrior minibike, Baja heat mini bike, non live axle kart and etc.Fit for Hisun196 engine, Predator 212cc engine，Predator 224 engine, mini bike 224cc predator engine.Fit for all engines with a 3/4" Straight Crankshaft.
【Complete Kit Easy to Install】:for your convenience Our kit comes with everything you need for a hassle-free installation, including 1 x 3/4" Driver Pulley, 1 x 5/8" Driver Pulley, 1 x Plastic Assy Cover, 1 x Aluminum Mounting Plate, 1 x Drive Belt, 1 x 10 Tooth Sprocket for #40/41/420 Chain, 1 x 12 Tooth Sprocket for #35 Chain (Chain not included), and 1 x Full Mounting Hardware.
【High Quality Materials】Our Torque Converter is made of high quality iron and aluminum materials, light weight, durable. It can reduce engine load and gain more power and save more effort on driving your car and can improve your driving speed.
【Including Two Screw Kits】We have two screw kits。 If you use the engines of American brand or American standard shaft thread (UNF) such as Honda, Preditor, or other not Metric standard thread shaft, please use this UNF screwes.if it not workes good please use the metric screws in other bag.

Rank No. #4

212CC 30 Series Torque Converter Go Kart Clutch 3/4" 10T #40 41 420 and 12T #35 Chain for Manco Comet TAV2 218353A

【Replace Part Number】Torque Converter Kit Replaces Comet 219552A, 203814A, 219456A, 218352A, 218353A, TAV2 30-75. Fit for Comet Torque Converter, desirable in applications requiring extra rugged driving ability such as small vehicles, riding lawnmowers, boonie bikes, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, LTV's, waterski winches, grounds maintenance appliances, materials handling devices and industrial equipment
【2 Sprockets】Comes with both sprockets fits a 3/4" shaft and comes with a 10 tooth sprocket for a #40/41/420 chain and a 12 tooth sprocket for a #35 chain (Chain not included). It will work with engine sizes 2HP-7HP
【Toruqe Converter Belt】Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7"
【Excellent Material】Our go-kart torque converter is made of high-quality iron and aluminum material, lightweight, sturdy, and durable. It can reduce engine load and gain more power and save more effort on driving your car and can improve your driving speed
【Full-Set Equipment】Kit obtains 1 x 3/4" driver pulley. 1 x 5/8" bore driven pulley. 1 x plastic assy cover. 1 x aluminum mounting plate. 1 x driver belt. 1 x full mounting hardware

SaleRank No. #5

Youxmoto 30 Series Torque Converter for Predator 212CC, 3/4 Inch Driver 10 Tooth #40 41 420 and 12 Tooth #35 Chain Drive Belt Pulley for Manco TAV2 Comet for 218353A Mini Bike Clutch

🏎️【Upgraded TAV2/ 30 Series Torque Converter Clutch Kit】: Youxmoto go-kart torque converter is the TAV2/30 asymmetrical series. it can reduce engine load and gain more power. It fits for Comet TAV2 Torq-A-Verters, fit 218353A, 219552A, 219456A, 217610A.
🏎️【Broad compatibility】: The Comet torque converter is compatible with 3/4" & 5/8" straight crankshaft. You can usually use it on 4-8 hp go-karts and motorbikes. Including: small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches.
🏎️【212cc 6.5 HP Go Kart Quality Drive Clutch】: Made of iron and aluminum material, which is sturdy, wear-resisting and fast heat dissipation 30-75. Engine Compatability: 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine. Engagement range is approximately 2350 RPM; however, it can be adjusted from Minimum 1200 RPM - Maximum 3100 RPM by changing out springs (not included).
🏎️【Complete Go Kart Torque Converter Kit】: Drive clutch bore: 3/4"; Driven unit: Overall Diameter 6" (5/8" driven pulley); 2 Sprocket teeth: 10 Tooth Sprocket for #40 #41 #420 chain & 12 Tooth Sprocket for #35 Chain (Chain not included). Package: 1 x 3/4" driver pulley. 1 x 5/8" bore driven pulley. 1 x plastic assy cover. 1 x aluminum mount plate. 1 x belt. 1 x full mount hardware.
🏎️【Toruqe Converter Belt for 6" Driven】 Length: 70.5cm / 27.76", Outside circumference: 27 23/64" , Width is 3/4".（1.9cm / 0.75"). Center to Center of driver and driven: 6-15/16 to 7".

Last update on 2025-07-05 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Predator Torque Converter?

Do you get stressed out thinking about shopping for a great Predator Torque Converter? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Predator Torque Converter, which is why we have assembled a comprehensive list of the greatest Predator Torque Converter available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Predator Torque Converter that you consider buying. Your questions might include the following:

Is it worth buying an Predator Torque Converter?
What benefits are there with buying an Predator Torque Converter?
What factors deserve consideration when shopping for an effective Predator Torque Converter?
Why is it crucial to invest in any Predator Torque Converter, much less the best one?
Which Predator Torque Converter are good in the current market?
Where can you find information like this about Predator Torque Converter?

We’re convinced that you likely have far more questions than just these regarding Predator Torque Converter, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Predator Torque Converter, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Predator Torque Converter. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Predator Torque Converter buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Predator Torque Converter currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Predator Torque Converter has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Predator Torque Converter?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Predator Torque Converter.
Customer Ratings: Number ratings grade Predator Torque Converter objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Predator Torque Converter.
Product Quality: You don’t always get what you pay for with an Predator Torque Converter, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Predator Torque Converter is should be an indication of how long it will work out for you.

We always remember that maintaining Predator Torque Converter information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Predator Torque Converter is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: Which is the best torque converter for predator?

A: Coming up in the 2 nd place is the GO KART TORQUE CONVERTER for PREDATOR ENGINE by Bullet Lines. And I am not even surprised that it is. First up, the build quality is top-notch. it is every bit as well-made as the offering from Megaflint. Here’s my takeaway: The torque converter can engage with an average RPM of 2350 without breaking down.

Q: What kind of engine does a predator 212 have?

A: Stock Engime, Predator 212 Engine 6.5 HP (212cc) OHV Horizontal Shaft Gas Engine, Go Kart Mini Bike. CARB Approved for sale in. California Install this TC2 1002P on a Predator 212. Predator has a shoulder at the crankshaft base that sits about 1/8 in. lower than a Honda or Clone engine.

Q: When to use a torque converter on a kart?

A: If your kart’s speed is slow and you want to climb up-hill, a converter will create more torque, effortlessly pushing the vehicle upward, avoiding over-speeding and sudden halt of the engine when you accelerate.

Q: What does the TC2 torque converter do at idle?

A: The TC2 provides Neutral engagement at Engine Idle. At 2200 RPM, the system engages for a Powerful Low Ratio for great takeoff speed. At Mid Range, the TC2 instantaneously shifts ratios based upon RPM and Load Requirements.

Predator Torque Converter