Contents

The Best pressure washer sandblaster attachment of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best pressure washer sandblaster attachment of 2023. Check our ranking below.

2,975 Reviews Scanned

Rank No. #1

FENG PAI Pressure Washer Sandblasting Kit - 5000 PSI Wet Sand Blaster Attachment for Pressure Washer, 1/4 Inch Quick Connect with Replacement Nozzle Tips

Higt-Quality Durable: Sandblasting kits are made of durable materials, brass and stainless steel, which are resistant to corrosion, abrasion, and stable performance. Its working pressure can reach 5000PSI 8GPM and the temperature can reach 60 ℃ / 140 ℉.
Working Principle: The pressure sandblasting kit is used to inject sand into the water system for cleaning. Use dry silica sand, baking soda or washed river sand for better results.
Easy to Use: 1/4 inch quick connector on the end of a gun, suitable for most pressure washer.
Widely Use: The pressure washer sandblaster kit is mainly used to remove rust, graffiti, paint and grease baking, and is ideal for household and factory abrasive cleaning!
Professional Service Team: We have an independent FENG PAI service team to solve all your doubts about the sandblast blaster, as long as you leave us a message, we will definitely give you an answer within 12 hours and serve until you are satisfied. Sandblasting packaging kits: Our pressure washer sandblasting includes 3m hose, 16" pressure washer wand (water input), 15 3/4" sand wand(sand input), a goggle, 4 hose clamps, 4 ceramic nozzles, and 2 rubber bands.

SaleRank No. #2

Pressure Washer Sandblasting Kit, 5000 PSI Wet Sandblaster Attachment, Power Washer Sandblasting with Replacement Ceramics Nozzle, 1/4 Inch Quick Disconnect Sandblasting Kit

SANDBLASTING PACKAGING KITS: Our pressure washer sandblasting includes 3m hose, 16" pressure washer wand (water input), 15 3/4" sand wand(sand input), a goggle, 4 hose clamps, 4 ceramic nozzles, and 2 rubber bands.
WORKING PRINCIPLE: The pressure sandblasting kit is used to inject sand into the water system for cleaning. Use dry silica sand, baking soda or washed river sand for better results.
APPLICATION: The pressure washer sandblaster kit is mainly used to remove rust, graffiti, paint and grease baking, and is ideal for household and factory abrasive cleaning!
HIGH-QUALITY PERFORMANCE: Sandblasting kits are made of durable materials, brass and stainless steel, which are resistant to corrosion, abrasion, and stable performance. Its working pressure can reach 5000PSI and the temperature can reach 60 ℃ / 140 ° F.
EASY to USE: 1/4 inch quick connector on the end of a gun, suitable for most pressure washer. It is one of the best choices for Father's Day gifts.

Rank No. #3

Rdutuok Pressure Washer Sandblasting Kit,Sand blaster for pressure washer with Replacement Nozzle Tips,Protect Glasses,1/4 Inch Quick Disconnect 5000 PSI for Abrasive Cleaning

Pressure Waher Sandblasting Package Include: 9.8Ft hose, 16" pressure washer wand (water input), 15 3/4" sand wand(sand input), a goggle, 4 hose clamps, 4 ceramic nozzles，2 rubber bands and 1 tape.
HIGH-QUALITY DURABLE- Sandblasting set are Made of durable material, brass and stainless steel,which are resistant to corrosion, abrasion, and stable performance. Its working pressure can reach 5000PSI and the temperature can reach 60 ℃ / 140 ° F.
WORKING PRINCIPLE: The pressure sandblasting kit is suction-fed injection of sand into water system, use dry silica sand, baking soda or washed and dried river sand.
WIDELY USE:The pressure washer sandblaster kit is great at remove rust, graffiti, paint and grease baking.Plus, they don’t create dust like a traditional sandblaster.
Note: Don't use play sand or other generic sand products. Make sure the sand is bone-dry.Dry the sand in the sun until it flows like granulated sugar or salt-with no clumps.The hose must stays clean with no wetness and no moisture!

Rank No. #4

FENG PAI Pressure Washer Sandblasting Kit - 5000 PSI Wet Sand Blaster Attachment for Pressure Washer, 1/4 Inch Quick Connect with Replacement Nozzle Tips

Higt-Quality Durable: Sandblasting kits are made of durable materials, brass and stainless steel, which are resistant to corrosion, abrasion, and stable performance. Its working pressure can reach 5000PSI 8GPM and the temperature can reach 60 ℃ / 140 ℉.
Working Principle: The pressure sandblasting kit is used to inject sand into the water system for cleaning. Use dry silica sand, baking soda or washed river sand for better results.
Easy to Use: 1/4 inch quick connector on the end of a gun, suitable for most pressure washer.
Widely Use: The pressure washer sandblaster kit is mainly used to remove rust, graffiti, paint and grease baking, and is ideal for household and factory abrasive cleaning!
Professional Service Team: We have an independent FENG PAI service team to solve all your doubts about the sandblast blaster, as long as you leave us a message, we will definitely give you an answer within 12 hours and serve until you are satisfied. Sandblasting packaging kits: Our pressure washer sandblasting includes 3m hose, 16" pressure washer wand (water input), 15 3/4" sand wand(sand input), a goggle, 4 hose clamps, 4 ceramic nozzles, and 2 rubber bands.

Rank No. #5

Tool Daily Pressure Washer Sand Blasting Kit, Wet Sandblaster Attachment, 2500 PSI, 1/4 Inch Quick Connect

Wet sand blaster for pressure washer is suction-fed injection of sand into water system.
Working pressure of pressure washer sand blaster attachment is up to 2500 PSI. Orifice 2.5. Max flow rate: 2 GPM. Temperature is up to 140°F/60℃. Please check image 6 to choose the size of orifice. If you need orifice 3.5 or orifice 3.0, please order "Tool Daily Pressure Washer Sandblasting Kit, Wet Sandblaster Attachment, 5000 PSI".
The pressure washer sand blasting attachments have a goggle, 10’ hose, 16’’ pressure washer wand (water input), 10’’ sand wand (sand input) and permanent nozzle (output).
Application: pressure washer sand blaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease.
Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand.

Rank No. #6

WOJET Sandblasting Kit, Wet Sandblaster Attachment, 5000 PSI, 1/4 Inch Quick Disconnect

1/4" Plug inlet, connect to pressure washer wand with 25ft sand suction tube.
Made of quality material : High quality brass and stainless steel. Working pressure is 5000 PSI. Temperature is up to 140ºF/60ºC.
Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand.
Pressure washer sandblaster kit used for abrasive cleaning. Ideal for rust removing , graffiti, paint, baked on grease. ower washer sand blaster kit use baking soda, dry silica sand or washed and dried river sand.
WOJET MFG always care and support our customer feedback, contact our customer service if there is any reason you are not satisfied.

Rank No. #7

SEHNSUCHT Pressure Washer Sandblasting Kit with Wet Abrasive Sandblaster Attachment, Include Nozzle Tips, 1/4 Inch Quick Disconnect, Replacement for 5000 PSI

【Sandblasting Gun】 This wet sandblasting kit can replace traditional sandblasting.This kit is different from traditional sandblasting, that's because it won't create dust when it work. it's good at removing rust, paint, stains any unwanted material.
【Package Include】 Goggle*1, 10ft hose*1, 16in pressure washer wand*1(water input), 17in sand wand wand*1(sand input), hose clamps*4 and replacement ceramic nozzle kits*2.
【About this kit】 This kits are quick connect inlet to gun for use easily. You can replace available parts individual, max pressure rating 5000 PSI, max flow rating 8 GPM 3000PSI@4 GPM or Greater, temperature is up to 140°F/60°C
【Variety of Applications】This kit is designed to blow water, dust and clean abrasives to remove rust, paint, scale and other stubborn materials from other surfaces. Use this kit clean off your machinery and engine compartments or barn doors of debris with one of these sand blasting guns.
【After-Sales Service】 High quality assurance! And we provide after-sales service policy. If you have any problems, please contact us first, we will try our best to ensure you are 100% satisfied!

Rank No. #8

Tool Daily Pressure Washer Sandblasting Kit, Wet Sand Blaster Attachment, 5000 PSI, 1/4 Inch Quick Disconnect

Orifice 3.5. Minimum Flow Rate: 3 GPM. Minimum Pressure: 3000 PSI. Please check image 4 to choose the size of orifice. If you need orifice 2.5, please order "Tool Daily Pressure Washer Sandblasting Kit, Wet Sand blaster Attachment, 2500 PSI".
The pressure washer sandblasting attachments have a goggle, 10’ hose, 16’’ pressure washer wand (water input), 17’’ sand wand (sand input) and two hose clamps.
Replacment Nozzles are available. Product "Tool Daily Pressure Washer Sandblasting Nozzle, Replacement Wet Sand blaster Attachment, 5000 PSI, 2-Pack". Working pressure of pressure washer sand blaster attachment is up to 5000 PSI. Temperature is up to 140°F/60℃.
Application: pressure washer sand blaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease.
Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand.

Rank No. #9

HYDDNice Pressure Washer Sandblaster Kit with 1/4” Quick Connect and Compatible Adapter Sand Blaster Attachment 2500 PSI

【High adaptability】: Our sandblasting kit fits most pressure washer which has 1/4’’ quick connect at the end of gun. Also come with a adapter.
【Durable】: Made of durable material; Max pressure of wet sand blaster for pressure washer is 2500 PSI. Max Temperature is 140°F/60℃.
【Package included】: The pressure washer sandblaster kit included adapter, 10’ hose, 16’’ pressure washer wand, 10’’ sand wand and a goggle.
【Application】: Sandblaster kit is easy to carry and use,pressure washer sandblasting attachments is ideal for abrasive cleaning. Such as removing rust, paint, graffiti, baked on grease. Pressure washer sand blasting attachments use baking soda, dry silica sand or washed and dried river sand.
【Service】: Customer satisfaction is the most important, if you're not 100% satisfied with the product,please contact us by email on Amzon of "Ask a question" button,we'll sove it for you.

Rank No. #10

Yaegoo Pressure Washer Sandblasting Kit, Wet Sandblaster Attachment, with Replacement Nozzle Tips, 5000 PSI, 1/4 Inch Quick Disconnect

【High-Quality & Durable】 Sandblasting kits are made of durable materials, brass and stainless steel, which are resistant to corrosion, abrasion, and stable performance. MAX Working Preesure: 5000 PSI. Max Temperature: 140°F/60℃.
【Working Principle】 Wet sand blaster for pressure washer is suction-fed injection of sand into water system. Use dry silica sand, baking soda or washed river sand for better results.
【Application】 Pressure washer sandblaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease. Ideal for household and factory abrasive cleaning! 1/4 inch quick connector on the end of a gun, suitable for most pressure washer.
【Sandblasting Package Kits】 Our pressure washer sandblasting includes a goggle, 10 feet hose, 16" pressure washer wand (water input), 16“ sand wand(sand input) and 2 hose clamps.
【Nice Customer Service】Except perfect products, Yaegoo also provides nice customer service. Please feel free to contact us, no matter before or after placing an order. We promise to offer you a satisfying solution. We value each of our customers.

Rank No. #11

Valley Industries SBK-400 Wet Sandblast Kit-3500 PSI, 10GPM, Brass

Easily strip paint, remove rust, graffiti and stains while eliminating the dust that comes with sandblasting
Reach up to 4, 000 PSI and 10 GPM
Features a ¼” male plug inlet to make connections to your pressure washing wand
Includes a premium tungsten carbide nozzle for increased durability
Includes 18 feet of suction hose

Rank No. #12

Pressure Washer Sandblasting Kit, 5000 PSI Wet Sandblaster Attachment with Replacement Nozzle Tips and Goggle, 1/4 Inch Quick Disconnect

【UPGRADED SANDBLASTING GUN】: Youxmoto pressure washer sandblasting kit provides an alternative to traditional sandblasting. It is used to inject sand into the water system for cleaning, it can remove rust, paint, stains, etc. very well. Consumes less abrasive, does not generate dust, comes with goggles, make sure you work safely.
【EASY TO USE】: These sandblaster kit for pressure washer, Compatible with brass nozzle fittings and pick-up tubes; 1/4" NPT quick connector on the end of a gun, suitable for most pressure washer. Its working pressure can reach 5000PSI, Max Flow Rating 8 GPM 3000 PSI @ 4 GPM or Greater, Temperature is up to 140ºF/60ºC.
【WIDELY APPLICATION】: The pressure washer sand blaster is mainly used to remove rust, graffiti, paint, scale, grease, and other stubborn materials from various surfaces. Such as cleaning rust from your machines, paint and graffiti ads on walls, and driveways, sidewalks, and iron fences. Use dry silica sand, baking soda or washed river sand for better results!
【DURABLE AND PREMIUM】: Built for durability, strength and longevity, this power washer sandblasting kit is made of high quality brass and stainless steel to resist corrosion and wear. The chrome plated gun is durable, Ideal for household and factory abrasive cleaning!
【PACKAGE INCLUDES】: 1* 9.84 Ft hose, 1* Pressure Washer Wand (water input), 1* Sand Wand (sand input), 1*goggle, 4* Hose Clamps, 4* Ceramic Nozzles. (Note: Don't use play sand or other generic sand. Make sure the sand is bone-dry, can flows like granulated sugar or salt-with no clumps.The hose must stays clean with no wetness and no moisture!)

Rank No. #13

Ultimate Washer UW11-PW5553 Heavy-Duty Abrasive 5500 PSI Blasting Kit with 0 Degree ¼ Inch 4.0 Stainless NPT MEG Nozzle

Heavy Duty Professional Pressure Washer Wet Sand Blast Kit, 5500 PSI
1/4" Male Plug Inlet to Connect to Your Pressure Washer Wand
25 FT Sand Suction Tube for Easy Sand Application
Great for Removing Rust or Paint from Metal, Concrete
Premium Tungsten Carbide Nozzle Cone, Stainless Steel Nozzle Tip 4.0 and Steel Head for Durability and Excellent Performance

Rank No. #14

Tool Daily Pressure Washer Sandblasting Nozzle Tip, Replacement Wet Sand Blaster Attachment, 5000 PSI, 2-Pack

ATTENTION: Replacement pressure washer sandblasting tips are designed only for Tool Daily 5000 PSI sandblasting kit.
The pressure washer sandblast tip includes 2 ceramic nozzles.
Working pressure of pressure washer sand blaster tips is up to 5000 PSI. Temperature is up to 140°F/60℃.
Sandblasting nozzle for pressure washer is suction-fed injection of sand into water system.
Application: pressure washer sand blaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease. Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand.

Rank No. #15

Hurotoms Pressure Washer Sandblasting Kit - Wet Blast Gun Attachment, 5000PSI, 1/4 Quick Disconnect, with Replacement Nozzle, Safety Goggles

▶Sandblasting Kit◀ Hurotoms' liquid sandblasting machine is more efficient and effective than traditional sandblasting, consumes less abrasive, and does not generate dust, ensuring healthy work and protecting the environment, why not do it!
▶Compatible◀ The maximum pressure of liquid sand blasting machine reaches 5000PSI, the maximum rated flow rate is 8 GPM3000 PSI @ 4 GPM, 1/4NPT quick coupling is linked to the heavy-duty rubber hose and compatible with most cleaning machines, meanwhile the accessories come with goggles.
▶Multi-Purpose◀ The high-pressure washer kit is suitable for abrasive cleaning, use it to remove rust, scale, paint on various surfaces; it can also clean roads, cars, fences and other places that need to be cleaned, making cleaning more professional and efficient!
▶Prefect Choice◀ Our liquid sandblasting machine is made of high-quality materials, compatible with brass interface fittings, anti-corrosion and wear-resistant, and is the best choice tool for cleaning needs such as car washing!! Make cleaning more efficient and professional while protecting your eyes!
▶ Hurotoms' Sandblasting Kit◀ 1 * 10FT Hose, 1 * High Pressure Washer Wand (Water Inlet), 1 * Sand Wand (Sand Input), 4 * Hose Clamps (Snap), 4 * Ceramic Nozzles (with 4 Leakproof Ring Included), 1 Pair of Goggles

Rank No. #16

Ultimate Washer 5500 PSI Abrasive Sand Blaster Kit

Heavy Duty Professional Pressure Washer Wet Sand Blast Kit, 5500 PSI
1/4" Male Plug Inlet to Connect to Your Pressure Washer Wand
18FT Sand Suction Tube for Easy Sand Application
Great for Removing Rust or Paint from Metal, Concrete
Premium Tungsten Carbide Nozzle Cone, Stainless Steel Nozzle Tip 4.0 and Steel Head for Durability and Excellent Performance

Rank No. #17

Orenic Sand Blaster Nozzle - Upgrade Your Cleaning Game with High Pressure Washer Sandblasting Kit, Sandblaster Attachment, and Sandblasting Kit - The Ultimate Sand Blaster Tool for Your Garden

Durable Material: Made of high quality materials that are corrosion resistant, wear resistant, and offer a long service life, ensuring a reliable and long-lasting sandblasting experience.
Multifunctional: The sand blast nozzle is lightweight and easy to carry, allowing you to use it quickly and in all directions, making it a versatile and multifunctional tool for any job.
Stable Performance: With stable performance and high reliability, the high pressure washer nozzle can be used with confidence, providing consistent results every time.
Simple To Use: The sandblasting kit is easy to use and includes a brass adapter, making it simple to remove rust, old paint and varnish, and dirt with great effect.
Widely Application: Suitable for watering gardens, lawns, and grasslands, the sandblasting kit is also perfect for car washing and pet grooming, making it a versatile tool for any outdoor cleaning task.

SaleRank No. #18

Misaso Pressure Washer Sandblasting Kit, Wet Sandblaster Attachment, 5000, 1/4 Inch Quick Disconnect 1Set

WORKING PRINCIPLE: The pressure sandblasting kit is used to inject sand into the water system for cleaning. Use dry silica sand, baking soda or washed river sand for better results.
HIGH-QUALITY PERFORMANCE: Sandblasting kits are made of durable materials, brass and stainless steel, which are resistant to corrosion, abrasion, and stable performance. working pressure can reach 5000PSI and the temperature can reach 60 ℃ / 140 ° F.
APPLICATION: The pressure washer sandblaster kit is mainly used to rust, graffiti, paint and grease baking, and is perfect for household and abrasive cleaning!
EASY to USE: 1/4 inch quick connector on of a , suitable for most pressure washer.

Rank No. #19

Linoone Pressure Washer Sandblasting Kit, Wet Sandblaster Attachment with 1/4 Inch Quick Disconnect, 5000 PSI, Nozzles Goggle (Red)

Package Include: 10 feet hose, 16 inch pressure washer wand (water input), 17 inch sand wand (sand input), two hose clamps and one goggle .
How to use: Connect the hose to the washer wand and sand wand, connect the 16-inch washer wand to the spray gun of the high pressure washer, insert the 17-inch sand wand into the sand, and then turn on the switch to use.
Perfect for removing rust, old paint and varnish, hard dirt etc.
Working Pressure: up to 5000 PSI. Water temperature: up to 140° F(60°C).
Any questions, please feel free to contact us. We will reply you within 24 hours.

Rank No. #20

AngeDZ 2-in-1 Undercarriage Pressure Washer Attachment, 16" Water Broom, Power Washer Accessories with 4 Nozzles, 3 Extension Wands, QC Anti-Fog Goggles, 4000PSI

Car Washing-mate. A necessary for car undercarriage cleaning. Save cost and energy on car washes. Two big steady wheels with high quality sealed ball bearings can move back and forward under car freely. Four high-pressure jets are super to clean the dirty grime, salt off easily
No Dead Corner Cleaning. 2 x 16” straight wands and 1 x 45° elbow wand allow the undercarriage cleaner to reach every corner at the bottom of vehicle. Instead of lying under the car with messy clothe and face, an easier cleaning by standing is possible now
Dual-purpose Accessoreis. Except the function of underbody pressure sprayer with nozzles up. Adjust the pivot valve till nozzles forward to get a water broom. Sweep away dirty water and residual debris left after car washing and also use for loose leaves, light dirt of daily cleaning
A Great Additon to Pressure Washer. Driven flow rate is 1.8GPM. Recommended working pressure 2300-4000psi. The connection of undercarriage washer is 1/4” quick connector plug. Match all the spray guns with the same quick connector size
Best Gift Choice. A compact 2-in-1 tool with one QC anti-fog goggles to protect you well. Easy to operate, reduce the workload of car owners. If there is any question, we provide positive response in 24 hrs and also 30 days free return and exchange by Amazon

Last update on 2023-08-21 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best pressure washer sandblaster attachment?

Do you get stressed out thinking about shopping for a great pressure washer sandblaster attachment? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching pressure washer sandblaster attachment, which is why we have assembled a comprehensive list of the greatest pressure washer sandblaster attachment available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for pressure washer sandblaster attachment that you consider buying. Your questions might include the following:

Is it worth buying an pressure washer sandblaster attachment?
What benefits are there with buying an pressure washer sandblaster attachment?
What factors deserve consideration when shopping for an effective pressure washer sandblaster attachment?
Why is it crucial to invest in any pressure washer sandblaster attachment, much less the best one?
Which pressure washer sandblaster attachment are good in the current market?
Where can you find information like this about pressure washer sandblaster attachment?

We’re convinced that you likely have far more questions than just these regarding pressure washer sandblaster attachment, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for pressure washer sandblaster attachment, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible pressure washer sandblaster attachment. Make sure that you are only using trustworthy and credible websites and sources.

We provide an pressure washer sandblaster attachment buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available pressure washer sandblaster attachment currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of pressure washer sandblaster attachment has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an pressure washer sandblaster attachment?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your pressure washer sandblaster attachment.
Customer Ratings: Number ratings grade pressure washer sandblaster attachment objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their pressure washer sandblaster attachment.
Product Quality: You don’t always get what you pay for with an pressure washer sandblaster attachment, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an pressure washer sandblaster attachment is should be an indication of how long it will work out for you.

We always remember that maintaining pressure washer sandblaster attachment information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding pressure washer sandblaster attachment is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: Can I use my pressure washer as a sandblaster?

A: Yes , you can, you can convert your pressure washer into an industrial wet sandblaster by using a pressure washer sandblasting kit and a medium such as sand. Wet sandblasting is more efficient than dry sandblasting and does not create dust. This tool easily removes tough stains, rust, multiple layers of paint, and graffiti. 6. How do you wet sandblast?

Q: What psi to run sandblaster?

A: The ideal PSI for running a sandblaster is 90 psi (in most cases) so having a look at the chart (above) we can see that the minimum CFM for an air compressor, using a small eighth inch nozzle is around 20 CFM, which is quite high and compressors that can produce that type of CFM output are usually pretty expensive.

Q: What is a wet sand Blaster?

A: Wet sandblasting is a process similar to power washing. It is used to remove dirt, paint and other difficult-to-remove materials from hard surfaces, such as concrete or metal, in a process known as abrasive blasting.