Contents
The Best ps4 fightstick pcb of 2023 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best ps4 fightstick pcb of 2023. Check our ranking below.
2,381 Reviews Scanned
- Multi-console support PS5 (With UFB-UP5)/Xb Series X/S/ Xb One / Xb 360 / PS4 / PS3 / PC / Wii U / PS Mini / MD mini. Backward-compatible PS4 games are playable on your PS5 console
- Compatible with Brook UFB-UP5 upgrade Kit. Connect UFB-UP5 with Brook UFB, you can play PS5 fighting games on your Fightsticks
- Build in SOCD cleaner. Headers are included. PS4 controller touchpad button simulation
- No 8-minutes timeout issue on PS4. Effortless installation(Screw terminal block for easy connections) and Upgradable firmware
- Console auto detection(PS3 / PS4 / Xb 360 / Xb One) and Console manual selection(PS4 / PS3 / Xb One / Xb 360 / Wii U / PS classic / MD mini)
- [EL2 FU 10K for PS4/PS3 Controller] – 4x replacement analog joystick was found in some PS4 DualShock 4 came with PlayStation 4 Pro, and some PS3 controllers also use this version. The thumbstick module was made by Favor Union (FU). The stick controller comes with 10KΩ trimmer potentiometers in orange
- [Compatibility] – The 14 prongs were positioned as the same as ALPS edition. Technically, the whole unit is interchangeable with EL1 ALPS 10K used in PS4 controllers, and other brands like ‘Scuf’ and ‘Razer Raiju Ultimate’ with ALPS joysticks inside. However, the trim pot resistor alone is not interchangeable with ALPS edition
- [Additional Resistor] – Complicated moving mechanism and daily wear and tear finally caused drifting. Even new sensors cannot be 100% balanced. Calibrating in controller settings might not work. We packed 10x correction resistors to solve the potential problem in hardware level. Solder one or two paralleled tiny resistors onto the potentiometer at the opposite direction against drifting. It will help correct 3 to 5 degrees drifting
- [When to replace] – The analog joystick needs to be replaced when your controller has the problem of drifting, creeping, stuttering, a blind spot, a dead spot, a dead zone, no reaction when clicking, or it wouldn't center after years of wear and tear. The OEM genuine repair parts ensure accuracy and prolong lifespan
- [Reminder of DIY] – With as many as 14 prongs, de-soldering and soldering the whole module takes serious skills. We suggest replacing the potentiometers first to solve most of the joystick problems. To desolder the entire joystick module off PCB by a normal soldering iron, please take a look at the desoldering kit at product ID: B0BK7169M8
- [2x Hall Effect Joysticks for PS4] – Hall thumbsticks Replacement for PS4 controller (DS4). With the electromagnetic hallstick sensors inside, the control stick delivers higher sensitivity and accuracy. No more wear of traditional carbon film resistor, say goodbye to drifting. (🔺Warning: Never use DS Tools on Github for it does not work with this MCU.)
- [2x Added-on Calibration PCB] – The tiny PCB was designed to stack on the back of main board. The moving signal is input to the high speed MCU. The calibrated signal outputs to the main board of controller. Connect the controller to a PC with a USB cable. You can fine reset the center and trim the curve via a web link. The accurate centering with no drift is essential for FPS aiming
- [Desoldering Tools included] – A copper heating plate melts all the solder joints simultaneously simply with a soldering iron. Solder Wick, Holes Cleaner and simple PCB holder included. With as many as 14 prongs, removing the old problem stick is the most difficult task. It might is not suitable for newbies, though we added these helping hand in the kit
- [Compatibility and Reminder] – 1. Please carefully study the images for compatible controller. 2. The soldering iron must be more than 60W. And the operation takes serious soldering skill and devices to desolder the old stick off the PCB. 3. Seriously follow the steps we presented on the installation guide for this kit is novel and tricky. 4. 🔺Attention: When calibrating, wait at least 3 seconds after unplugged the USB cable before you plug it in again to re-power on the DS4 controller
- [What’s in box Model: HL-PS4] – 2x Hall Joysticks, 2x Calibration PCB, 1x Heating Plate, 1x Solder Wick. (🔺Teardown screwdriver tools, USB input cables and wired/wireless controllers, other soldering tools and materials are required, however NOT included.)
- [ALPS 2.1KΩ Potentiometer] – The OEM trim pot resistor was made by ALPS. It fits ALPS analog joysticks. This trimmer potentiometer works with PS5 DualSense and some PlayStation 4 DualShock 4 wireless controllers with 2.1K ohm ALPS thumbstick module inside
- [Compatibility] – ALPS sensors come in two different resistance values. Make sure the value is around 2.1K before ordering. Never judge its value by its color. (Be noticed: Choose 10KΩ version for most PS3, PS4, Xbox One, Elite Series 1 and 2, Xbox Series S|X and Switch Pro controllers. ALPS version is not interchangeable with the orange version made by FU.)
- [Additional Drift Fix PCB] – Several factors cause joystick drifting a common issue. Even new joysticks can drift. The potentiometer was born without precision. Wear to the carbon film, spring fatigue and material stretching made it not centered. Dust, moisture and drop make it worse. We packed PCB to fix the problem of drifting in one direction. Simply adjust the variable resistor to eliminate the drifting
- [For most joystick problem] – The potentiometer sensor needs to be replaced when the controller has the problem of creeping, stuttering, a blind spot, a dead spot, a dead zone, or it wouldn't center after years of wear and tear. De-soldering the unit with only 3Pins will be a lot easier than replacing the entire joystick with as many as 14 prongs
- [Reminder of Replacement] – Use a pair of pliers to separate the problem sensor off the joystick module. Try to replace the wiper first, see if it works. De-solder the sensor off the PCB. A metal pick helps to clear the holes. Soldering the new unit in is a breeze. Remember to calibrate the new control sticks in settings
- Compatible with Switch/Switch 2, PS4, PS3, Xbox Series S/X, Xbox One, Xbox 360, PC Windows, macOS, Steam Deck, Android, NeoGeo mini.
- Compatible with Sanwa Denshi buttons and joystick that is perfect for customization
- Supports the XINPUT and DINPUT when being used on PC
- Supports the Turbo functions with different speed settings.
- F300 is compatible with PS5 by MAYFLASH Magic-S Ultimate adapter or MagicBoots for PS4 and PS5 Converter.
Last update on 2025-07-04 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best ps4 fightstick pcb?
Do you get stressed out thinking about shopping for a great ps4 fightstick pcb? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching ps4 fightstick pcb, which is why we have assembled a comprehensive list of the greatest ps4 fightstick pcb available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for ps4 fightstick pcb that you consider buying. Your questions might include the following:
- Is it worth buying an ps4 fightstick pcb?
- What benefits are there with buying an ps4 fightstick pcb?
- What factors deserve consideration when shopping for an effective ps4 fightstick pcb?
- Why is it crucial to invest in any ps4 fightstick pcb, much less the best one?
- Which ps4 fightstick pcb are good in the current market?
- Where can you find information like this about ps4 fightstick pcb?
We’re convinced that you likely have far more questions than just these regarding ps4 fightstick pcb, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for ps4 fightstick pcb, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible ps4 fightstick pcb. Make sure that you are only using trustworthy and credible websites and sources.
We provide an ps4 fightstick pcb buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available ps4 fightstick pcb currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of ps4 fightstick pcb has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an ps4 fightstick pcb?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your ps4 fightstick pcb.
- Customer Ratings: Number ratings grade ps4 fightstick pcb objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their ps4 fightstick pcb.
- Product Quality: You don’t always get what you pay for with an ps4 fightstick pcb, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an ps4 fightstick pcb is should be an indication of how long it will work out for you.
We always remember that maintaining ps4 fightstick pcb information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding ps4 fightstick pcb is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
FAQ:
Q: Can a brook Universal Fighting Board be used on a PS4?
A: The Brook UNIVERSAL FIGHTING BOARD PCB supports XBOX SERIES X|S, Xbox One, Xbox 360, PS4, PS3, Wii U PC, Switch, NEOGEO mini, PS Classic and MD mini. Low-delay design give you the best game experience. Support play PS4 Games on PS5!
Q: Where can I get a PCB for an arcade stick?
A: PCBs may be obtained from manufacturers such as Brook and Akishop-Customs, or harvested from controllers to be “padhacked” to work inside of an arcade stick. All mass-manufactured fightsticks already come with a PCB installed, which can also be taken out and used in a custom fightstick if desired.
Q: Can You Make your own custom built FightStick?
A: Part of the “feel” of your own custom built fightstick is created by your choice in housing. You could purchase a pre-made housing, an older legacy fightstick, or you could even take a gutted retro console and use that too!
Q: How is the joystick connected to the PCB?
A: PCB or Microswitches: The joystick utilizes a PCB that is connected to microswitches, which connect to the 5-pin harness and relays the joystick’s current position to the PCB. There are joystick levers that do not use the 5-pin harness, and instead require direct connection to microswitches using .187” quick disconnects.