Contents
20 Best Psi Commander Lathe of 2023 – Romance University
After hours researching and comparing all models on the market, Romance University finds out the Best Psi Commander Lathe of 2023. Check our ranking below.
2,257 Reviews Scanned
- KWL-1018VS replaces TCLC10VS. ETL Listed and certified by Intertek
- Powered by 3/4 hp Variable Speed high performance motor(110V) & an SBC microprocessor. Two belt positions: 500-2000 RPM & 1500-3600 RPM
- Headstock Thread 1" x 8tpi. Headstock/Tailstock Taper #2MT. Distance between Centers 18". Swing over Bed 10". Cast iron base
- Tailstock & Spindle Bore 3/8". Quill Travel 1-5/8". (24) indexing positions with spindle locking. Convenient built-in handles
- See Description below for all of the included parts
- Turncrafter Commander Tailspinner features a Live Tailstock; Tailstock spindle is identical to Headstock spindle with 1" x 8tpi threads and #2 Morse Taper mounting capabilities; Any chuck, center, faceplate, or other accessories can operate as live on the Tailspinner tailstock; Ability to lock the Live Tailstock spindle with the turn of a handle to convert to a traditional lathe's tailstock function
- Great for bowl turning; Remount wood blank without fear of misalignment; No need to re-chuck your blank; Leave your faceplate or chuck attached when reversing a bowl blank keeping the bowl exactly centered on the lathe axis; Identical tailstock and headstock means you can mount your work, flip it around, and then flip it back again
- Powered by 1-1/2 hp variable speed 110v motor and an SBC microprocessor; Two belt positions: 450-1600 RPM and 950-3600 RPM; Digital readout lets you work at precise speeds; Worklight with 18" flex cable makes it easier to see even the most intricate work
- 14-1/2" Distance between Centers; 12" Swing over Bed; 4" Quill Travel; 24 Indexing positions; Cast iron base footprint is 31" x 9-1/2"; Convenient built-in handles; Weighs 106 pounds; Accepts optional extension beds TCLC12XB2 and KWLXBED12
- Includes: 6" and 12" tool rest with 1" post, 3" faceplate, (2) 4-prong Dead Spur Centers, 60° Dead Center, Dead Mandrel Saver, Dead Safety Center, Tool Caddy storage rack, (4) hex wrenches, Phillips screw driver, Knockout rod, safety goggles
- Convert your lathe from Multi Speed to Variable Speed; Includes 3/4 HP variable speed motor, switch box controller, motor pulley, motor mounting plate, 7mm drill bit, metric allen wrench, and hardware
- 3/4 Horsepower Variable Speed Motor: Shaft is 15mm diameter by 2-1/4" long; Body is 3-3/16" diameter; Length from tip of shaft to back of end cap is 9-3/4"
- Three belt positions; #1 650-1450 RPM; #2 1250-2800 RPM; #3 1600-3800 RPM
- 110/120 Volts; 60 Cycles; 1700 RPM; Single phase; Class E
- Compatible with the following lathes: PSI Turncrafter Commander TCLC10 & KWL-1018, Rockler Excelsior 33207, Harbor Freight 65345, Shop Fox W1752, Jet 1015, Rikon 70-105, Delta 46-455, Grizzly H8259, and more
- Heavy duty chrome-plated self-centering chuck will hold your work tight & secure on midi and full size woodworking lathes
- Chuck is pre-threaded to 1" x 8tpi and includes 3/4" x 16tpi headstock spindle adaptor; Chuck body weighs 4 lbs and is 4" in diameter
- Includes #1 step jaws 3/32" to 1-7/8" External & 11/32" to 3-3/8" Internal; Includes #2 round jaws 1-1/2" to 3-1/8" External & 2" to 3-7/8" Internal
- Includes screw chuck, allen wrench, and a set of tightening levers
- This "C-Series" chuck is compatible with all "C-Series" jaws and accessories
- Turncrafter Commander Tailspinner features a Live Tailstock; Tailstock spindle is identical to Headstock spindle with 1" x 8tpi threads and #2 Morse Taper mounting capabilities; Any chuck, center, faceplate, or other accessories can operate as live on the Tailspinner tailstock; Ability to lock the Live Tailstock spindle with the turn of a handle to convert to a traditional lathe's tailstock function
- Great for bowl turning; Remount wood blank without fear of misalignment; No need to re-chuck your blank; Leave your faceplate or chuck attached when reversing a bowl blank keeping the bowl exactly centered on the lathe axis; Identical tailstock and headstock means you can mount your work, flip it around, and then flip it back again
- Powered by 1 hp variable speed 110v motor and an SBC microprocessor; Two belt positions: 450-1700 RPM and 950-3800 RPM; Digital readout lets you work at precise speeds; Worklight with 18" flex cable makes it easier to see even the most intricate work
- 14-1/2" Distance between Centers; 10" Swing over Bed; 4" Quill Travel; 24 Indexing positions; Cast iron base footprint is 31" x 7-1/4"; Convenient built-in handles; Weighs 82 pounds; Accepts optional extension beds TCLC10XB and KWLXBED10
- Includes: 6" and 12" tool rest with 5/8" post, 3" faceplate, (2) 4-prong Dead Spur Centers, 60° Dead Center, Dead Mandrel Saver, Dead Safety Center, Tool Caddy storage rack, (4) hex wrenches, Phillips screw driver, Knockout rod, safety goggles
Last update on 2025-07-13 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Psi Commander Lathe?
Do you get stressed out thinking about shopping for a great Psi Commander Lathe? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Psi Commander Lathe, which is why we have assembled a comprehensive list of the greatest Psi Commander Lathe available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Psi Commander Lathe that you consider buying. Your questions might include the following:
- Is it worth buying an Psi Commander Lathe?
- What benefits are there with buying an Psi Commander Lathe?
- What factors deserve consideration when shopping for an effective Psi Commander Lathe?
- Why is it crucial to invest in any Psi Commander Lathe, much less the best one?
- Which Psi Commander Lathe are good in the current market?
- Where can you find information like this about Psi Commander Lathe?
We’re convinced that you likely have far more questions than just these regarding Psi Commander Lathe, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Psi Commander Lathe, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Psi Commander Lathe. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides an Psi Commander Lathe buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Psi Commander Lathe currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Psi Commander Lathe has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Psi Commander Lathe?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Psi Commander Lathe.
- Customer Ratings: Number ratings grade Psi Commander Lathe objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Psi Commander Lathe.
- Product Quality: You don’t always get what you pay for with an Psi Commander Lathe, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Psi Commander Lathe is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining Psi Commander Lathe information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Psi Commander Lathe is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
FAQ:
Q: Why choose Penn State Industries Mini lathes?
A: If you’re looking for compact, easy to use, dependable & affordable mini lathes, look no further than Penn State Industries. Discover your ideal mini Lathe, midi lathe, pen lathe or wood lathe as we carry some of the most award-winning Mini Lathes & midi lathes at some of the best values around.
Q: What are the best psi tools for woodworking?
A: PSI Woodworking Products LR2244 Long Ranger, For Dust Collectors, 220v/440V Heavy Duty Pro Remote Motor Starter PSI Woodworking LCHSS8 Wood Lathe 8pc HSS Chisel Set & Products TM32 1/2-Inch Drill Chuck with #2 Morse Taper Arbor (1/2″ 2MT)
Q: Are Penpen state lathes any good?
A: Pen state is pretty solid with their production from the beginning, especially about mini lathes. The Penn State Industries lathe is among the best deals for the money for a variable speed mini wood lathe that I have seen.
Q: What is the best variable speed mini wood lathe?
A: The Penn State Industries lathe is among the best deals for the money for a variable speed mini wood lathe that I have seen. Some folks consider this unit as a Midi lathe for the power and the sturdiness this small motor produces.
Related Post:
- Psi Commander Lathe
- Psi Woodworking Lchss8 Hss Wood Lathe Chisel Set 8 Piece
- Duck Commander Commander In Chief
- Duck Commander Commander In Chief
- Used Accuturn Brake Lathe For Sale
- Used Accuturn Brake Lathe For Sale
- Drill Chuck For Lathe
- Lathe Cut Off Tool
- Lathe Tool Sharpening Jig
- Nova Comet Ii Lathe