Contents

The Best raspberry pi battery pack of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best raspberry pi battery pack of 2023. Check our ranking below.

2,255 Reviews Scanned

Rank No. #1

MakerFocus Raspberry Pi 4 Battery Pack UPS, RPI Pack Standard 10000mAh Raspberry Pi Battery USB Pack Raspberry Pi Latest Version V3Plus Expansion Board Power Supply Type-C for RPI 5 4B 3B+ 3B 2B+

Note: If you use UPS to power Raspberry Pi 3B/3B+ while charging, please make sure that the input power is not less than 2.5A. Recommended use: 3V 2.5A power supply
The link to the assembly video is available on the product page, Two power supply modes: outdoor portable type and indoor UPS power supply mode: 1) As an outdoor portable power supply, the main board is powered by a lithium battery. The maximum external power supply capacity is: 5.1V. 2.5A. 2) As an indoor UPS power supply mode: the UPS power supply interface is connected to an external 5V power supply, the power supply requires 5V 2A-3A, and the maximum output current can reach 5V 3A
4+2LED are designed to show the status of battery power, charge or discharge:1) 4 Battery power LEDs: Used to show the current battery voltage and power. 2)The function of the Power LED is to display whether the UPS is supplying power to the Pi, and the LED is on: it means the output is 5V. LED off: Indicates that there is no voltage at the output. 3) Charging indicator LED: When the UPS is externally charged via the TYPE-C USB interface, the Charge LED starts to work
The UPS has overcharge and overcurrent protection functions: When the UPS externally outputs about 4A, the UPS will consider the external circuit to be in a short-circuit state and automatically cut off the output. The lithium battery board that comes with the UPS has an overcharge and overdischarge protection board. Prevents the battery from being overcharged and overdischarged when the external circuit is abnormal, thereby reducing the possibility of damage to the battery
Two output modes: In addition to the regular output via the USB port, the V3P output interface adds an LC filter, the ripple is about 20mV under no-load condition, and the ripple is about 50mV when Raspberry Pi 4 is connected

Rank No. #2

VGE Battery Pack for Raspberry Pi, 5000mAh, 5V 2.0A, Adhesive, Pi4 (Micro USB)

Battery Pack only (not a UPS)
5V, 2.0 Amp output (Minimum power draw: 50mAh)
Nano Adhesive pad to adhere to most surfaces
Built-in power cable

Rank No. #3

SunFounder PiPower Raspberry Pi UPS Power Supply, Protect The Raspberry Pi and SD, 5V/3A Power Bank Expansion Board, Compatible with Raspberry Pi 4B/3B+/3B/Zero 2 W/Zero W (Battery Included)

Raspberry Pi UPS (Uninterruptible Power Supplies) module, compatible with Raspberry Pi 4, 3 and all Model B/B+ series. Also suitable for other boards powered by USB (5V/3A) such as Banana Pi/Rock Pi/Libre Computer Board.
Pass-through charging technology, battery pack included. It can charge Raspberry Pi and battery pack simultaneously.
Battery protection technology, support over charge/discharge protection, balance charging and over heating protection.
UPS module output: 5V/3A, battery charge : 5V/2A MAX.
Battery capacity: 7.4V 2000mAh. Battery life : 3-4 hours.

Rank No. #4

VGE Battery Pack for Raspberry Pi, 4000mAh, 5V 2.4A, Adhesive, Pi4 (USB-C) (USB-C)

Battery Pack only (not a UPS)
5V, 3 Amp output (yes, it really outputs 3A, despite the title of the product... Amazon won't let us update the title)
Minimum power draw: 50mAh
Nano Adhesive pad to adhere to most surfaces
Built-in power cable

Rank No. #5

Pisugar S Plus Portable 5000 mAh UPS Lithium Battery Power Module Platform for Every Raspberry Pi 3B/3B+/4B Model Accessories handhold(Not Include Raspberry Pi)

UPS function: The external power supply is disconnected to continuously supply power and obtain the external power status. External power access can trigger boot, suitable for unattended projects.
Input and output: 5V3A output, 5V3A input
GPIO button: It can trigger the device to turn on when it is turned off, and it can be used as a custom button after turning on (when the automatic power-on function is turned off)
Bottom connection: convenient connection method, complete installation in one minute, without affecting GPIO expansion
Expansion: Expansion through wireless charging and solar charging

Rank No. #6

Pisugar2 Plus Portable 5000 mAh UPS Lithium Battery Power Module Platform for Every Raspberry Pi 3B/3B+/4B Model Accessories handhold(Not Include Raspberry Pi)

Continuous Operation: PiSugar2 provides UPS function. It can also shut down safely when the power is too low to avoid data loss and damage caused by sudden power failure.
Elegant Experience: Control the module through well-designed graphical web interface. you can get power level and charging status, configure timing power on, custom button functions, low power auto off, etc.
Onboard RTC: The onboard RTC makes it possible to obtain real time in any network condition. Timing boot function is also provided.
Multiple Usage: Charge through TypeC port (compatible with e-mark) or microUSB port. PiSugar2 Pro adopts PH2.0 standard battery plug, you can also replace other lithium batteries with 3.7V output on your need.
Extensible Power: input/output pads are provided on the circuit board, which can be equipped with any 5V standard charging devices, such as solar panels and QI wireless charging.

Rank No. #7

MakerHawk Raspberry Pi UPS Power Supply Uninterruptible UPS HAT 18 650 Battery Charger Power Bank Power Management Expansion Board 5V for Raspberry Pi 4 Model B / 3B + / 3B (Not include battery)

[Intelligent Design] UPS for Raspberry PI 4B / 3B+ / 3B. Built-in power path management, support side-loading, load high current line compensation function. There are two USB A port power output, and also adds type C output. It provides uninterruptible power for the Raspberry Pi to make your Raspberry Pi still work while moving, and its design is so smart that you can get rid of troubled of a mass wire.
[LED Power Display] It can use most of the 18 650 batteries and fully comply with the battery characteristics in terms of battery life. The illuminated LED light can quickly show the remain power and support the discharging while charging. You can directly connect to the external power supply for charging. At the same time, the Raspberry Pi will not be turned off.
[Multiple Protection] Support output overcurrent, overvoltage, short circuit protection; input overvoltage, overcharge, overdischarge, overcurrent discharge protection and machine overheat protection. Safe and reliable.
[Use and Note] This product belongs to the power supply device. Please keep it out of the reach of children. Please strictly refer to the instructions for the UPS product, install the battery first, then connect the UPS to the Raspberry Pi. Please do not reverse the battery. If the battery polarity is reversed, it will directly burn the power management chip of the device. Do not add any Components by yourself.
[Package] 1* Raspberry Pi UPS; 4* M2.5* copper stick; 4* M2.5 screws; 4* M2.5* long copper stick; 4* M2.5 nuts; 1* Acrylic shield; 1* Instructions. [100% Satisfaction Warranty] We always bear in mind that your satisfaction is our priority. For any reason you are unsatisfied with our product at any time, just feel free contact support for exchange or refund. Click MakerHawk-US then Ask a question to contact us.

Rank No. #8

Pisugar 3 Portable 1200 mAh UPS Lithium Battery Pwnagotchi Power Module for Raspberry Pi-Zero W/WH Model Accessories handhold(Not Include Raspberry Pi)

PiSugar 3 adds a software watchdog function. When the function is turned on, the dog needs to be kicked regularly, which can effectively prevent the Raspberry Pi from crashing and improve the reliability of the system.
PiSugar 3 provides hardware battery protection like never before, limiting battery voltage to nearly 80%. When charging protection is turned on, the battery cycles life can be improved.Set up quadruple overvoltage protection function, overcurrent protection function and undervoltage protection function to ensure the safety of the Raspberry Pi, PiSugar as well as the lithium battery.
PiSugar 3 continues to use the pogo pin design to connect with Raspberry Pi from the back. In this way, it does not occupy the GPIO, and is compatible with other GPIO devices.
PiSugar 3 has full UPS functions and can set up multiple awakening methods to meet various unique project needs.
PiSugar 3 communicates with the Raspberry Pi through the I2C interface and is compatible with most I2C devices. In addition, the I2C communication address can be customized to avoid I2C address conflicts.

Rank No. #9

Vilros 3 AA Battery Holder with Micro USB Connector for Raspberry Pi Pico

Battery Holder Holds 3 AA Batteries and has a Micro USB Connector
Great For Powering a Raspberry Pi Pico
Does NOT include Batteries
1 Holder

Rank No. #10

Pisugar2 Portable 1200 mAh UPS Lithium Battery Pwnagotchi Power Module for Raspberry Pi-Zero W/WH Model Accessories handhold(Not Include Raspberry Pi)

Easy to Install: install in 10 secs. No soldering required. Use small test-pad to supply power, does not occupy any GPIO of Raspberry Pi, can be used both with or without GPIO header.
Perfect Size: the standard dimension of raspberry pi zero. You can easily put your prototypes in our open-source 3D print cases. Easy, and graceful.
On-board RTC: Provide real-time time for the system, and realize timing startup function
Customer button: custom any function with the sh command line. short click /double click /long click can be set independently.
Visual management interface: Check battery status and setting advanced features easily

Rank No. #11

Pisugar 3 Plus Portable 5000 mAh UPS Lithium Battery Power Module Platform for Every Raspberry Pi 3B/3B+/4B Model Accessories handhold(Not Include Raspberry Pi)

PiSugar 3 plus adds a software watchdog function. When the function is turned on, the dog needs to be kicked regularly, which can effectively prevent the Raspberry Pi from crashing and improve the reliability of the system.
PiSugar 3 plus provides hardware battery protection like never before, limiting battery voltage to nearly 80%. When charging protection is turned on, the battery cycles life can be improved.Set up quadruple overvoltage protection function, overcurrent protection function and undervoltage protection function to ensure the safety of the Raspberry Pi, PiSugar as well as the lithium battery.
PiSugar 3 plus continues to use the pogo pin design to connect with Raspberry Pi from the back. In this way, it does not occupy the GPIO, and is compatible with other GPIO devices.
PiSugar 3 plus has full UPS functions and can set up multiple awakening methods to meet various unique project needs.
PiSugar 3 plus communicates with the Raspberry Pi through the I2C interface and is compatible with most I2C devices. In addition, the I2C communication address can be customized to avoid I2C address conflicts.

SaleRank No. #12

diymore 1865O Battery Holder Double Li-ion V8 Battery Shield Micro USB 5V/3A 3V/1A Power Bank Battery Charging Module for Raspberry Pi and Arduino ESP32 (2 Holders)

Supports 3V 1A voltage outputs.
Supports 5V 2.2A voltage outputs.
Micro USB charging current is 600mA-800mA.
Supports up to two Li-ion batteries. It is recommended to use two 18650 batteries, which can be longer! The cell has to be 65mm.
Special attention: the installation of the battery must be determined positive and negative, the board has been clearly marked positive and negative! Installation errors will burn out the module!

Rank No. #13

waveshare Li-ion Battery HAT for Raspberry Pi 5V Regulated Output Bi-Directional Quick Charge Integrates SW6106 Power Bank Supports PD/QC/FCP/PE/SFCP

Li-ion Battery HAT for Raspberry Pi, 5V Regulated Output, Bi-directional Quick Charge
Onboard SW6106 chip, supports bi-directional quick charge, supports multi quick charge protocols like PD/QC/FCP/PE/SFCP
Lithium battery protection circuitry, provides reverse protection, over charge/discharge protection, over current protection, and short circuit protection
Onboard indicators: quick charge, warning, and power capacity
Download wiki: www.waveshare.com/wiki/Li-ion_Battery_HAT

Rank No. #14

GeeekPi Raspberry Pi UPS V5 Power Supply Uninterruptible UPS HAT,Support 18650 Battery Charger Power Bank Power Management Expansion Board 5V for Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A

UPS Plus is a new generation of UPS power management module which supports OTA firmware upgrade and supports RTC onboard.
There are two INA219 chip onboard to detect batteries voltage and the voltage output from UPS Plus to Raspberry Pi.
Compatible with Raspberry Pi 4B/3B+/3B/2B/B+/B/A+/A
Package Inlcudes:1 x UPS Plus For Raspberry Pi,4 x M2.5 copper pillar,4 x M2.5 screws,4 x M2.5 long copper stick,4 x M2.5 nuts,1 x Acrylic shield,1 x Instruction

Rank No. #15

Battery Pack, UPS Power Board, Easy Installation Durable UPS Power Board Dual Color Indicator Charger Portbale for Raspberry Pi Zero

【Long Service Life】--- UPS Lite V1.2 removes the rarely used serial port function, optimizes the battery power supply circuit, and uses ultra low on resistance MOS tube for power supply control, which improves the battery life.
【Professional】--- A UPS power supply specially designed for Raspberry Pi zero, which integrates a fuel gauge chip (MAX17040G) and a 1000mAh lithium battery.
【Easy to Use】--- Theconvenient installation will save both your tiem and effoprt, and the standby time in actual test is up to 6 hours.
【Function】--- Supports external power plug detection, also supports charging and discharging, has dual color charging status indicator.
【Exquisite Workmanship】--- Made of premium Printed Circuit Board, the UPS power board is not easy to damage, and very durable for long term use.

Rank No. #16

Raspberry Pi 4 Battery Pack UPS, RPI Pack Standard 4000mAh Raspberry Pi Battery USB Pack Raspberry Pi Latest Version V3Plus Expansion Board Power Supply Type-C for RPI 4B 3B+ 3B 2B+

Dual Power Modes: When used as an outdoor portable power supply, it is powered by a lithium battery with a maximum external power supply capacity of 5.1V, 2.5A. When used as an indoor UPS power supply, it can be plugged into a 5V, 2A power adapter, and its USB-A interface can output a maximum of 5.1V, 3A. It is recommended to use a 3V, 2.5A power supply and ensure that the input power is not lower than 2.5A when charging Raspberry Pi3b/3B+.
Support for Charge While Discharge: This UPS supports charging while discharging, without affecting the output of the UPS power supply when there is an external power outage. Please note that when using it to supply power for Raspberry Pi3b/3B+ while charging, the input power should not be lower than 2.5A.
LED Indicator Design: The UPS has a 4+2 LED indicator design to show the status of battery power, charge or discharge. Four battery power LEDs are used to show the current battery voltage and power, and the power LED displays whether the UPS is supplying power to the Pi. The charge charging indicator LED starts to work when the UPS is externally charged via the TYPE-C USB interface.
Overcharge and Overcurrent Protection: This UPS comes with overcharge and overcurrent protection functions, which automatically cut off the output when the external circuit is in a short-circuit state, preventing damage to the battery. The lithium battery board also has an overcharge and overdischarge protection board to prevent the battery from being overcharged or overdischarged when the external circuit is abnormal.
Two Output Modes: In addition to the regular USB output port, the V3P output interface adds an LC filter to reduce ripple. The ripple is about 20mV under no-load condition, and about 50mV when a Pi4 is connected. The document link and assemble video can be found in the product description below.

Rank No. #17

Retroflag GPi Case 2 for Raspberry Pi CM4, with 3.0” LCD and 4000mAh Li-on Rechargeable Battery, Type C Charging Port and Pi Easy Install with Carrying Bag

Compatible with Raspberry Pi CM4 Lite/eMMC
3.0 inch 640x480 TFT LCD Screen
4000mAh Li-on battery, rechargeable
Type C charging ports and 3.5mm headphone jack
Extra Turbo button, Hotkey and Save energy function with a save energy button

Rank No. #18

MakerFocus 3.7V LiPo Battery 10000mAh Lithium Rechargeable Battery with Integrated Protective Board, Insulation Coating and PH2.0A Plug for Raspberry Pi UPS Board and Other

Note: The maximum operating current of this 3.7V 10000mAh lipo battery is only about 3A, can not be used for unmanned aerial vehicles, model aircraft or power tools and other products that require high current
Application: 1S 10000mAh lipo batteries can be used for Raspberry Pi UPS board whose plug PH2.0A
Safety: Passed the MSDS test and the UN 38.3 test recognized by the United Nations to ensure that the chemical substances are not exceeded, and the use is safe and reliable
Specification: Material: Lithium Rechargeable Battery, Voltage: 3.7V, Capacity: 10000mAh, Discharge: 1C, Plug: PH2.0A
Standard Charging Method: Charging this battery to 4.25V at 0.2C constant current, then charge the battery at a constant voltage of 4.2V till it's charging current≦0.05C

Rank No. #19

Pisugar 1200 mAh Lithium Battery Power Module for Raspberry Pi-Zero, Pi-Zero W/WH Model Accessories

Power supply module for Pi-Zero, Pi-Zero W/WH.Up to 2.4A output current. Even 900mah can work more than 4 hours with zero W.
Easy to Install: install in one minute. No soldering required. Use small test-pad to supply power,does not occupy any GPIO of Raspberry Pi, can be use pi without GPIO header.
Perfect Size: standard dimension of raspberry pi zero. You can easily put your prototypes in small cases. Easy, and graceful.
Use when charging: use the micro USB port as raspberry pi zero does. No extra charging cable required. Can be charged and supplied power to raspberry pi at the same time.

Rank No. #20

GeeekPi Raspberry Pi 4 Case, Mini Tower Case with ICE Tower Cooler, Raspberry Pi UPS Plus Hat, 0.96 inch OLED Display, GPIO 1 to 2 Expansion Board for Raspberry Pi 4 Model B

Support Raspberry Pi 4 Model B only; Support OLED display, UPS Plus integration, ICE Tower Cooler integration.
The 0.96 inch OLED screen was already mounted on the case. It can display the running status of Raspberry Pi or UPS Plus through programming, such as Raspberry Pi’s IP address, CPU temperature, disk utilization, CUP load, memory status and other system information.
The fan on super ICE Tower Cooler upgraded to PWM RGB fan. Tower structure, 5mm copper tube, multi-layer heat sinks, 7 blades powerful fan, all the above combinations make this super radiator for Raspberry Pi. In the case of overclocking, it can reduce the temperature of the Raspberry Pi from 80℃ to 40℃.
The UPS Plus hat will charge the batteries while providing power output at the same time from an external power source and it can automatically switch to batteries output when external power supply is unavailable, keeping the system running trouble-free. It also can power Raspberry Pi via Pogo Pins without using any GPIO resources.
Package Includes: 1 x ABS Mini Tower Case, 2 x Acrylic side panel,1 x 0.96 inch OLED Display(already mounted on the case ),1 x UPS Plus Hat(18650 lithium battery is NOT Included), 1 x ICE Tower Cooler, 1x GPIO Edge Extention,1x Assembly Manual (Note: Raspberry Pi 4B is Not included in the package)

Last update on 2023-08-03 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best raspberry pi battery pack?

Do you get stressed out thinking about shopping for a great raspberry pi battery pack? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching raspberry pi battery pack, which is why we have assembled a comprehensive list of the greatest raspberry pi battery pack available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for raspberry pi battery pack that you consider buying. Your questions might include the following:

Is it worth buying an raspberry pi battery pack?
What benefits are there with buying an raspberry pi battery pack?
What factors deserve consideration when shopping for an effective raspberry pi battery pack?
Why is it crucial to invest in any raspberry pi battery pack, much less the best one?
Which raspberry pi battery pack are good in the current market?
Where can you find information like this about raspberry pi battery pack?

We’re convinced that you likely have far more questions than just these regarding raspberry pi battery pack, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for raspberry pi battery pack, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible raspberry pi battery pack. Make sure that you are only using trustworthy and credible websites and sources.

We provide an raspberry pi battery pack buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available raspberry pi battery pack currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of raspberry pi battery pack has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an raspberry pi battery pack?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your raspberry pi battery pack.
Customer Ratings: Number ratings grade raspberry pi battery pack objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their raspberry pi battery pack.
Product Quality: You don’t always get what you pay for with an raspberry pi battery pack, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an raspberry pi battery pack is should be an indication of how long it will work out for you.

We always remember that maintaining raspberry pi battery pack information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding raspberry pi battery pack is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What battery does a Raspberry Pi use?

A: If all you are powering is a Raspberry Pi and USB devices , you will need to supply 5 volts, so a 7.4 volt battery would be fine. If you need to supply 9V to another device, however, you must take that into consideration.

Q: What is power supply of Raspberry Pi?

A: The first, recommended and easiest way to power the Raspberry Pi is via the Micro USB port on the side of the unit. The recommended input voltage is 5V, and the recommended input current is 2A. At ModMyPi, our standard power supply for the Raspberry Pi is 5.1V @ 2.5A.

Q: Can boards for the Raspberry Pi?

A: This PiCAN2 board provides Controller Area Network (CAN) Bus capabilities for the Raspberry Pi. It uses the Microchip MCP2515 CAN controller with MCP2551 CAN transceiver. Connection are made via DB9 or 3-way screw terminal. There is an easy-to-install SocketCAN driver, and programming can be accomplished in C or Python.