Contents
20 Best Rear Trailing Arm Bushing Removal Tool of 2023 – Romance University
After hours researching and comparing all models on the market, Romance University finds out the Best Rear Trailing Arm Bushing Removal Tool of 2023. Check our ranking below.
2,175 Reviews Scanned
- [ Application ] --- Compatible with Honda Civic 1988-2000; Compatible with CRV 1997-2001; Compatible with CRX 1988-1991; Compatible with Del Sol 1993-1997; Compatible with Acura Integra 1994-2001; Compatible with Integra 1990-1993
- [ Packing ] --- Included in a Heavy-duty plastic blow-molded carrying case for easy and safe transportation
- [ Design ] --- Shifting hook design can adjust the size
- [ Function ] --- Be used for replace the rear trailing arm bush, then Removal and installation of the new bush to rear trailing arm without damage to the ABS sensor cable
- [ Important Note ] --- Do Not remove the trailing arm from vehicles or use a hydraulic press.
- 【Application】This rear suspension bushing removal tool has a wide range of application and strong practicality. It is suitable for Ford Focus MK1 & MKII 1998-2007, Ford Cuga 2008, Ford C-Max 2007, Mazda 3 sedan, hatchback 2003-2008, suitable for Mazda 5 CR, CW, MPV 2005, applicable to V50 2004-2012, applicable to S40 MK sedan 2003-2012.
- 【Performance】This rear suspension bushing kit has excellent performance, protects your car from scratches, no marks or scratches, and is used to silently press in and pull out the rear of the shaft to improve safety and reliability.
- 【Easy to use】Designed for the removal and installation of bushes and bearings, this rear trailing arm bushing tool is easy to use and install without the need to remove the rear axle, saving a lot of time.
- 【Material】This control arm bushing removal tool is made of selected carbon steel. The greater the hardness, the higher the strength, but the lower the plasticity, the stronger the rust prevention, the longer the durability and the longer the service life.
- 【After-sales Service】This rear control arm bushing kit has been strictly tested before leaving the factory.If you encounter any problems in the use process, please contact our customer service in time, and we will solve any difficulties for you in time.
- Replace Car Bushes: This trailing arm bushing removal tool is for replacement of the rear trailing arm bush (moveable metal suspension pieces on the rear of your car that the wheel, brake, and hub connect to) on your Honda or Acura vehicle
- Safe Design: Hook design of the rear trailing arm suspension for mounting the tool on the trailing arm securely without damaging the ABS sensor cable, trailing arm, and parts close to the bush with a hydraulic press or disconnect brake parts such as calipers, rotors, brake shoes, brake fluid lines, or emergency brake cables
- Easy To Use: Remove wheels and body lateral link bolts, loosen the toe link bolts, remove the trailing arm bush bolts, pull the trailing arm down enough to put on tool, apply lubrication to trailing arm bushsy
- Compatible with: The bush removal installation tool is suitable for Honda or Acura vehicles with bushing removal tool; Suitable for Honda – Civic 1988-2000, CRV 1997-2001, CRX 1988-1991, Del Sol 1993-1997 and Acura – Integra 1994-2001, Integra 1990-1993
- Compact Storage: The rear trailing arm bushing tool comes with a premium well-organized box for easy storage and transport. The rear trailing bushing remover tool is stored safely in a beautifully packaged case that can withstand high-strength extrusion
- 【Ideal for】 The Rear Trailing Arm Bushing Remover Tool is used for replacement of the rear trailing arm bush (moveable metal suspension pieces on the rear of your car that the wheel, brake, and hub connect to) on your vehicle; Removal and installation of the new bush to Rear Trailing arm without damage to the ABS sensor cable.
- 【Applicable】Fit For Honda or Acura vehicles with trailing arm bushings; Fit for Honda – Fit for Civic 1988-2000, Fit for CRV 1997-2001, Fit for CRX 1988-1991, Fit for Del Sol 1993-1997 and Fit for Acura – Fit for Integra 1994-2001, Fit for Integra 1990-1993
- 【Easy to Storage】Rear trailing arm bushing tool comes with a premium well-organized box for easy storage and transport. The tool is stored safely in a packaged case that can withstand high-strength extrusion.
- 【Safe Design】 Hook design for mounting the tool on the trailing arm securely without damaging the ABS sensor cable, trailing arm, and parts close to the bush with a hydraulic press or disconnect brake parts such as calipers, rotors, brake shoes, brake fluid lines, or emergency brake cables
- 【Easy to Use】Remove wheels and body lateral link bolts (watch for any camber shims between the body and the link), loosen (not remove) the toe link bolts, remove the trailing arm bush bolts, pull the trailing arm down enough to put on the tool (you may need to disconnect brake line bracket/parking brake bracket on trailing arm), apply lubrication to trailing arm bush, use tool to push out the trailing arm bush, clean, lubricate, install new trailing arm bush, reassemble.
- Removal and installation of new bush to rear trailing arm without damage to the sensor cable
- The special hook designs holds the tool secure during operation
- A cut away window allows visual access for installing correctly
- Compatible for Honda Civic 1988-2000, CRX 1988-1991, Del Sol 1993-1997, CR-V 1997-2002, Acura Integra 1994-2001
- Operation: Remove wheels and body lateral link bolts (watch for any camber shims between the body and the link), loosen (not remove) the toe link bolts, remove the trailing arm bush bolts, pull the trailing arm down enough to put on tool (you may need to disconnect brake line bracket/parking brake bracket on trailing arm), apply lubrication to trailing arm bush, use tool to push out the trailing arm bush, clean, lubricate, install new trailing arm bush, reassemble
- Replace Car Bushes: This trailing arm bushing removal tool is for replacement of the rear trailing arm bush (moveable metal suspension pieces on the rear of your car that the wheel, brake, and hub connect to) on your Honda or Acura vehicle
- Safe Design: Hook design for mounting the tool on the trailing arm securely without damaging the ABS sensor cable, trailing arm, and parts close to the bush with a hydraulic press or disconnect brake parts such as calipers, rotors, brake shoes, brake fluid lines, or emergency brake cables
- Easy To Use: Remove wheels and body lateral link bolts, loosen the toe link bolts, remove the trailing arm bush bolts, pull the trailing arm down enough to put on tool, apply lubrication to trailing arm bushsy
- Compatible With: For Honda or Acura vehicles with trailing arm bushings; Applicable for Honda – Civic 1988-2000, CRV 1997-2001, CRX 1988-1991, Del Sol 1993-1997 and Acura – Integra 1994-2001, Integra 1990-1993
- Easy To Carry and Store: This rear trailing arm bushing tool is packed in a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set.
- REPLACE CAR BUSHES: Use the ABN Trailing Arm Bushing Removal Tool for replacement of the rear trailing arm bush (moveable metal suspension pieces on the rear of your car that the wheel, brake, and hub connect to) on your Honda or Acura vehicle
- FITS YOUR VEHICLE: For Honda or Acura vehicles with trailing arm bushings; Applicable for Honda – Civic 1988-2000, CRV 1997-2001, CRX 1988-1991, Del Sol 1993-1997 and Acura – Integra 1994-2001, Integra 1990-1993
- EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization
- SIMPLE & SAFE DESIGN: Hook design for mounting the tool on the trailing arm securely without damaging the ABS sensor cable, trailing arm, and parts close to the bush with a hydraulic press or disconnect brake parts such as calipers, rotors, brake shoes, brake fluid lines, or emergency brake cables
- EASY TO USE: Remove wheels and body lateral link bolts (watch for any camber shims between the body and the link), loosen (not remove) the toe link bolts, remove the trailing arm bush bolts, pull the trailing arm down enough to put on tool (you may need to disconnect brake line bracket/parking brake bracket on trailing arm), apply lubrication to trailing arm bush, use tool to push out the trailing arm bush, clean, lubricate, install new trailing arm bush, reassemble; 14mm socket not included
- Application: Compatible with Ford Focus MK1 MKII 1998-2007; Compatible with Ford Kuga 2008; Compatible with Ford C-Max 2007; Compatible with Mazda 3 Sedan, Hatchback 2003-2008; Compatible with Mazda 5 CR, CW, MPV 2005; Compatible with V50 2004-2012; Compatible with S40 MK Sedan 2003-2012
- Function: Designed for removal and installation of rear trailing arm bushing tool, and can be used in situ without removing the arm from the vehicle
- Material: Made of high quality metal material, strong hardness, stable structure, and surface anticorrosive treatment, more durable, will extend the service life
- Easy to use and store: All tools are placed in the toolbox and fixed in the box, which can not only prevent damage during transportation, but also facilitate the use and storage during work
- 12 Months Warranty: We offer 12 months warranty, we will refund or replace if this trailing arm bushing tool has any quality issue
- 【Application】The control arm bushing toolbox has strong practicality. It is currently only applicable to the Ford Focus MK1 (98-04).
- 【Performance】Rear trailing arm bushing tool has excellent performance, which can protect your car from scratches, and it is used to silently press in and pull out the rear of the shaft to improve safety and reliability.
- 【Easy to Use and Storage】Bushing removal tool kit is easy to use and install without the need to remove the rear axle, saving a lot of time. What's more, Heavy-duty plastic blow-molded carrying case is easy transportation, safe storage, and quick organization.
- 【Material】Rear bushing tool kit is made of selected carbon steel. The greater the hardness, the higher the strength, and the lower the plasticity, the stronger the rust prevention, the longer the durability and the longer the service life.
- 【After-sales Service】The trailing arm bushing kit has been strictly tested before leaving the factory.If you encounter any problems in the use process, please contact our customer service in time, and we will solve any difficulties for you in time.
- Service completely performed on the car.
- No removing the trailing arm from the vehicle and using a hydraulic press.
- Service time is only 10 minutes per side, you can save more time, labor and money.
- Shifting hook design could adjust the size.
- Included in a blow plastic carry case.
- Easy To Use
- Made In USA
- Engineered to Perform
- Quality, Reliable Parts
- 【HIGH QUALITY】Made of high quality carbon steel material,rust-resistant and durable,well made,work great,it is not easily damaged, has a qualified quality and long service life.
- 【FITMENT】Especially designed for Ford Focus MK1 & MKII 1998-2007,for Ford Kuga 2008,for Ford C-Max 2007,for Mazda 3 Sedan, Hatchback 2003-2008,for Mazda 5 CR, CW, MPV 2005,for V50 2004-2012,for S40 MK Sedan 2003-2012.
- 【CONVENIENCE】Everything you need for a fast & effective separation pull removal broken screws easily,multi-fluted extractors,storage case included.
- 【FUNCTION】It is used to press in and out of the rear of the shaft without sound. Saves a lot of time by eliminating the need to disassemble the rear axle.
- 【After-Sales Service】We stand behind all of the products with a 100% product guarantee and promise to give you the best in customer care! If you have any issue about the item, please contact us by e-mail, we will try our best within 24 hours to reply.
- Professional Bushing Press Kit: The trailing arm bushing removal tool for replacement of the rear trailing arm bush (moveable metal suspension pieces on the rear of your car that the wheel, brake, and hub connect to), compatible with Honda or Acura cars.
- Premium Quality: The bushing removal tool is made of high-quality metal, with high hardness and is not easily broken. The surface has a rust resistant powder coating, which has a long service life and is durable and sturdy.
- Design: Hook design for mounting the tool on the trailing arm securely without damaging the ABS sensor cable, trailing arm, and parts close to the bush with a hydraulic press or disconnect brake parts such as calipers, rotors, brake shoes, brake fluid lines, or emergency brake cables
- Easy to Operate: Just remove wheels and body lateral link bolts (watch for any camber shims between the body and the link), loosen the toe link bolts, remove the trailing arm bush bolts, and pull the trailing arm down enough to put on the tool, apply lubrication to trailing arm bush, use tool to push out the trailing arm bush, clean, lubricate, install new trailing arm bush, reassemble.
- Applications: The control arm bushing tool is compatible for Honda or Acura vehicles with trailing arm bushings; Compatible for Honda–Civic 1988-2000, CRV 1997-2001, CRX 1988-1991, Del Sol 1993-1997 and compatible for Acura–Integra 1994-2001, Integra 1990-1993.
- Function: Remove and install ball joints in the rear wheel carrier, balljoints and rubber bearings in the longitudinal arms, rear axle differential bearings on lower axle carrier and rear differential rubber bearings.it is a very cost effective tool to replace upper/lower bushings/balljoints and the large trailing arm bushing. also able to use the kit to do the FCABs as well using the RTAB configuration
- Removal and Installation of Ball joints On The Rear Wheel Carrier On Vehicle: Compatible with BMW E31, E38, E39, E60, E61 and E70(X5),E63, E64, E65, E66, E67
- Removal and Installation of Ball joints and Rubber Bearings On The longitudinal Arms for Vehicle: Compatible with BMW E31, E36, E38, E39, E46, E60, E61, E63, E64, E65, E66, E67, E70(X5), E83, E85
- Removal and Installation Of Rear Axle Differential Rubber Bearings On Lower Axle for Vehicle: Compatible with BMW E31, E36, E46, E83, E85, E86
- Removal and Installation Of Rear Axle Differential Rubber Bearings for Vehicle: Compatible with BMW E31, E36, E38, E46, E60, E61, E63, E64, E65, E66, E67, E81, E83, E85, E86, E87, E90, E91, E92, E93, compatible with MINI Cooper S: R53
- For use on BMW E36 E46 Chassis
- Designed to remove the press fit the solid metallic rear suspension bushings (bushes/joints) located in the bearing carrier
- Allows removal and installation of rear outer ball joint
- This tool set allows for on-car installation/removal
- andy tools eliminates the need to remove drive-line components from vehicle while servicing
- Tool designed for replacing rear axle bonded rubber mounting bushing(s) while on car
- without need for removing rear axle assembly
- For use on Bora 1.4/1.6/1.8/2.0 and 1.9D(2001 to 2003)
- Tool used for removal and installation
- For use on Audi A3 VW Golf IV
- Compatible Vehicles : Applicable to many cars and LCV ,HGV Engines
- Package: 20 x Press Sleeves, Inside Diameter from 34-72mm in 2mm steps, Outside Diameter from 44-82mm in 2mm steps, 4 x Pulling Spindles with nuts and thrust bearings (M10. M12. M14. M16). 2 x double-sided step discs.
- Product Usage: For Removal and Installation of Bearings, Bushes, Seals and cut down the possibility of damaging the bearing or suspension housings
- Benefit : Created from rugged drop forged construction and heat treated to withstand difficult and rugged jobs, making this tool set a long lasting and reliable tool
- Important Note: When doing automotive maintenance always make sure all the tools are correctly used and wear glasses and gloves . Any question or problem, feel free to contact us
- Guaranteed fitment
- OE trailing arm bushing dimensions for correct alignment and smooth ride
- Restores proper suspension handling and braking stability
- High-quality heat-resistant elastomer and metal materials for maximum durability
- 24 Month Unlimited Mileage Warranty
- High quality
- High performance
- Professional products
- Hyper-Flex replacement polyurethane components stand up well to contaminants that often destroy rubber and have been engineered to give longer-lasting performance and not compress permanently
- 【 High Quality Iron Materials 】This trailing arm is made of high grade iron material,ensure maximum strength and durability for long lasting usage. Such a practical tool you will need it
- 【 Fitment 】The rear bushing is especially designed for Civic CR-V CRX Del-Sol. A direct replacement part for the old one
- 【 Reliability 】This bushing tools with stable characteristics, high reliability. Helps to improve traction and reduces wheel hop
- 【 Easy To Install 】This control arm bushing tool comes with bracket, direct bolt-in installation, no modification is required. This is a perfect choice if you are in need of trailing arm bushings!
- 【 Professional Manufacturing 】100% Brand new trailing arm bushings. Made by professional manufacture, quality meet or exceeded strict OEM requirement
Last update on 2023-08-10 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Rear Trailing Arm Bushing Removal Tool?
Do you get stressed out thinking about shopping for a great Rear Trailing Arm Bushing Removal Tool? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Rear Trailing Arm Bushing Removal Tool, which is why we have assembled a comprehensive list of the greatest Rear Trailing Arm Bushing Removal Tool available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Rear Trailing Arm Bushing Removal Tool that you consider buying. Your questions might include the following:
- Is it worth buying an Rear Trailing Arm Bushing Removal Tool?
- What benefits are there with buying an Rear Trailing Arm Bushing Removal Tool?
- What factors deserve consideration when shopping for an effective Rear Trailing Arm Bushing Removal Tool?
- Why is it crucial to invest in any Rear Trailing Arm Bushing Removal Tool, much less the best one?
- Which Rear Trailing Arm Bushing Removal Tool are good in the current market?
- Where can you find information like this about Rear Trailing Arm Bushing Removal Tool?
We’re convinced that you likely have far more questions than just these regarding Rear Trailing Arm Bushing Removal Tool, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Rear Trailing Arm Bushing Removal Tool, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Rear Trailing Arm Bushing Removal Tool. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides an Rear Trailing Arm Bushing Removal Tool buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Rear Trailing Arm Bushing Removal Tool currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Rear Trailing Arm Bushing Removal Tool has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Rear Trailing Arm Bushing Removal Tool?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Rear Trailing Arm Bushing Removal Tool.
- Customer Ratings: Number ratings grade Rear Trailing Arm Bushing Removal Tool objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Rear Trailing Arm Bushing Removal Tool.
- Product Quality: You don’t always get what you pay for with an Rear Trailing Arm Bushing Removal Tool, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Rear Trailing Arm Bushing Removal Tool is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining Rear Trailing Arm Bushing Removal Tool information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Rear Trailing Arm Bushing Removal Tool is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
FAQ:
Q: What does a trailing arm do?
A: Trailing Arm. The trailing arm is usually mounted forward of the rear axle and is perpendicular to it. It is attached to the chassis and axle by means of bushings. The function of the trailing arm is to provide a smoother ride over uneven terrain. The rigid trailing arm’s up and down movement helps to maintain a smooth ride.
Q: Can an aluminum trailing arm get bent?
A: Over time, trailing arms can be bent or even broken, causing unpredictable handling and possibly very dangerous situations. If your trailing arms are damaged at all, replace them today and bring back that famous handling that your 911 is known for. Rear Aluminum Trailing Arm, left, 911 (1978-89) $1927.75
Q: How do you replace control arm bushing?
A: Position the floor jack under the lower control arm and raise the control arm and suspension. Push in and pull out on the upper control arm using a pry bar. Replace any bushings that allow the control arm to move. Slide under the vehicle. Visually inspect the lower control arm bushings for cracking, splitting and oil saturation.
Related Post:
- Rear Trailing Arm Bushing Removal Tool
- Trailing Arm Bushing Removal Tool
- Trailing Arm Bushing Removal Tool
- Rear Trailing Arm Bushing Remover Installer Tool
- Rear Trailing Arm Bushing Remover Installer Tool
- Mazda 3 Trailing Arm Bushing Tool
- Mazda Trailing Arm Bushing Tool
- 2001 Nissan Pathfinder Rear Trailing Arm
- 2001 Nissan Pathfinder Rear Trailing Arm
- 1999 Ford Expedition Rear Lower Trailing Arm