Contents

20 Best Rexing Dash Cam Suction Cup of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best Rexing Dash Cam Suction Cup of 2023. Check our ranking below.

2,353 Reviews Scanned

Rank No. #1

TiToeKi Dash Cam Suction Mount with 15+ Swivel Ball Adapters Compatible with Rexing V1, UGSHD, Falcon F170, KDLINKS, Vantrue, APEMAN, Z-Edge, Roav, Old Shark, YI, Peztio, UGSHD and Most Dash Cameras

Come with 10+ different joints，suitable for 99% dash cam, Different joints kit to suit most Car Dash Camera, GPS, Action Camera. Not compatible Garmin Dash Cam.
Adjustable neck with 360 degrees rotating holder, Easy to install and easy to use.
Please attaching To a Clean And Smooth Surface To Get Maximum Holding Strength.
Sturdy and heat resistant, the windshield under the scorching sun, the suction cup bracket can still maintain a strong suction.
What You Get - 1 x dash cam mount holder,15+ different pivot swivel points.

Rank No. #2

Rexing V1 MAX, V1P MAX, V1P 3rd Gen and V1P Pro Dash Cam Suction Cup Mount

Suction cup mount compatible with Rexing V1 MAX, V1P MAX, V1P 3rd Generation and V1P Pro
NOTE: This mount does NOT support the V1, V1 3rd Gen, V1P or V1LG

SaleRank No. #3

Rexing Suction Cup Mount for V1, V1 3rd Gen, V1P, V3

Suction cup mount compatible with Rexing V1, V1 3rd Generation, V1P， V3
NOTE: This mount does NOT support the V1P 3rd Generation, V1P Pro or V1LG

SaleRank No. #4

Sportway S40 Dash Cam Suction Mount (3rd Gen) with10pcs 360 Rotating Joints Compatible for Rexing, Old Shark, Yi, TOGUARD, Compark, Kingslim, Crosstour and Most Dash Cameras, DVR, GPS

★[Universal Compatible] S40 comes with 10pcs difference joint kits, suitable for most 99% dash cam, Such as Rexing V1 Max, V1P MAX, V1P 3rd , V1P Pro, Old Shark, Yi, Compark, Kingslim, Crosstour etc.
★[360 Degrees Rotation] Adjust the 360 degrees joint to get any angle you need, providing you with the best viewing to keep secure driving. Just enjoy the best driving experience.
★[Premium Quality] The dash cam mount uses POM+ABS plastic , Sturdy and heat resistant. The suction cup used PVC material, diameter 55cm. Remove the mount easily by pulling the suction clip without leaving any nasty marks.
★[Secure & Stable] Sportway dash cam mount featured with upgraded super strong suction cup,even on the bumpiest road, It is still easy to sticks securely on the windshield or dashboard. Just make sure to remove all air from underneath.
★[Easy to install] Just Tear off the protective film, choose the suitable position. Make sure to remove all air from underneath to get Maximum suction strength on the Windshield.

Rank No. #5

Sportway S30 Dash Cam Suction Mount (2nd Gen) with 10pcs Joints for REXING,Z-Edge,Old Shark,YI,KDLINKS,Falcon Zero,Transcend,Crosstour,VANTRUE,GoPro Hero and Most Other Dash Cameras DVR GPS

★S30 with 10pcs different joints, suitable for most popular brand dash cam, such as REXING,Z-Edge,Old Shark,YI,KDLINKS,Falcon Zero,Transcend,Crosstour,VANTRUE,Black Box,GoPro Hero......For the corresponding brand and model, please check the picture
★The mount uses POM and ABS plastics ,tolerable temperature range is :-40℃～120℃;the suction cup uses PVC material, tolerable temperature range is :-20℃～70℃,and bearing weight up to 5kgs(11 lb)
★Easy to Install,Remove the suction cup protective film and attach to a Clean and smooth surface to get Maximum holding strength on the Windshield.
★360 degree rotation design,rotate ball adapter head provides flexibility for positioning the dash cam.
★Easier to use than 3M Double-Sided Adhesive Mount Holder Bracket, no harm to car glass

Rank No. #6

Dash Cam Suction Cup Mount and Glue Adhesive Mount Compatible with Dash Camera/DVR Video, Come with 10+ Different Joints Suitable for Crosstour, YI 2.7", Rexing V1P, UGSHD, APEMAN and Other Dash Cam

Fits most popular car dash cam Compatible with YI 2.7"，YI Nightscape, Rexing V1，Old Shark Dash Cam，Anker Dash Cam. Not compatible Garmin Dash Cam.
Sturdy and heat resistant, the windshield under the scorching sun, the suction cup bracket can still maintain a strong suction.
Adjustable neck with 360 degrees rotating holder, Easy to install and easy to use.
Please attaching To a Clean And Smooth Surface To Get Maximum Holding Strength
What You Get - 2 x dash cam mount holders,10+ different pivot swivel points,2 x Glue Double Sided Adhesive Tapes.

Rank No. #7

iSaddle Dash Cam Suction Mount - Windshield & Dashboard Suction Cup Mount Holder/w Various Joints for Yi/Rexing/Falcon/Old Shark/VANTRUE/KDLINKS/WheelWitness/...(99% On-Dash Cameras Suitable)

EASY TO INSTALL!!! - Quick Install in One Second NO Tools Requires, Should Attach To Clean And Smooth Surface To Get Maximum Holding Strength.
EASY TO CUSTOMIZE! - Rotate to Any Angle You Need and Get Best Driver's View, Easy To Customize it With iSaddle Mounting Kit.
SUIT FOR ALL CARS! - No Need to Worry About the Rearview Mirror, Install to Windshield or Dashboard or Anywhere With 3M Mounting Pad.
SUIT FOR 99% CAMS! - Various Joints Fits 99% Dash Cams/Action Cams(For Yi/Rexing/Falcon/Z-Edge/Old Shark/VANTRUE/Rove/AUKEY/APEMAN/KDLINKS/ARECORD/HP/WheelWitness/Transcend/TaoTronics and so on).
Please Contact Us!!! - Purchase Now, Risk-Free. Feel Free to click the "Add to Cart" Button RIGHT NOW!

Rank No. #8

Wikkiv Suction Cup Mount Holder Dash Cam Mount Glue Double-Sided Adhesive Mount, Come with 10+ Swivel Ball Adapters Compatible with Rexing V1, Z-Edge, Old Shark, YI, UGSHD and Most Dash Cameras

Come with 10+ different joints，can connect different dash camera. Not compatible Garmin Dash Cam.
The suction cup mount holder easy to install and easy detachable.
360 degrees rotating holder，adjust to any angle you want.
The dash cam mount kit suitable for windshield.
Sturdy and heat resistant, dash cam mount performs better in hot weather than most.

Rank No. #9

Dash Camera Suction Mount Cup Holder Vehicle Video Recorder Windshield & Dashboard for Yi Rexing V1P Dash Car DVR Camera GPS

SaleRank No. #10

QveeQ Dash Cam Suction Cup Mount Compatible with Crosstour, APEMAN, YI 2.7", Z-Edge Z3 3" and Most Other Dash Cam with 16 Different Points, 3 x Glue Double Sided Adhesive Tapes, 3 Wipes(Dry and Wet)

The dashcam mount Compatible with Byakov, YI 2.7", YI Nightscape, Rexing V1, APEMAN, Roav, Old Shark Dash Cam，Anker dash cam etc. Not compatible Garmin Dash Cam.
Easy to install and remove, no residue.
Wipe the windshield and the bottom of the suction cup with alcohol cotton. Get the most adsorption.
A 360-degree rotating ball adapter head for flexible positioning of the camera.
Come with 9 different joints, suitable for 99% dash cam.

Rank No. #11

Sportway Dash Cam Mount, S10 Pro Suction Cup Dash Camera Mount Holder with 10+pcs Joints for Rove APEMAN CHORTAU Roav Nexar iiwey REXING Z-Edge Old Shark YI ... 98% Car Dash Cameras

S10 Pro with 10+pcs different joints, suitable for most popular brand dash cam, such as Rove APEMAN CHORTAU Roav Nexar iiwey REXING Z-Edge Old Shark YI Crosstour VANTRUE... For the corresponding brand and model, please check the picture
The mount uses POM and ABS plastics ,tolerable temperature range is :-40℃～120℃;the suction cup uses PVC material, tolerable temperature range is :-20℃～70℃,and bearing weight up to 5kgs(11 lb)
Easy to Install,Remove the suction cup protective film and attach to a Clean and smooth surface to get Maximum holding strength on the Windshield. Easier to use than 3M Double-Sided Adhesive Mount Holder Bracket, no harm to car glass.
270 degree rotation design,rotate ball adapter head provides flexibility for positioning the dash cam.
We offer 3-Year warranty for quality-related issues,and If this mount does not fit for your dash cam, welcome to visit Sportway other mounts, such as S10 S10Pro S20 S30 S40 S50 S60 S80... There's always one for you!

Rank No. #12

Dash Cam Mount, Suction Cup Mount,Windshield & Dashboard Suction Cup Mount Camera Mount,For ROVE R2-4K,CHORTAU Dash Cam,Screw Connectors Are Suitable For Most Dash Cam, DVR, GPS and Sports Camera

【Wide Compatible】Compatible with ROVE R2-4K, CHORTAU, GoPro Hero, Z-Edge, OldShark, Jeemak, Apexcam, NIUTA, DJI OSMO, APEMAN, 1/4" 1/8" thread adapter for most dash cams, Action cameras, DVRs, GPS and webcams, please carefully confirm the size of the connector before purchasing.
【Strong suction and stability】 In extremely hot and cold weather conditions, the Dash Cam Mount will still be firmly attached to the windshield or dashboard. It has a strong vacuum force, which will last for a long time and will not shake during driving, ensuring that your dash cam is free from wear.
【Multi function mount】The dash cam mount is equipped with an adjustment knob, which can rotate 360 ° to achieve the best position for the equipment. The suction cup mount can be adsorbed on the windshield, automobile dashboard, glassware, windows, boats and any smooth and clean surface, without leaving residues and scratches after removal.
【High quality materials]】The suction cup mount of the dash cam is made of ABS+PVC environment-friendly raw materials，The 1/4 "1/8" thread adapter is made of alloy materials， The surface is anodized to improve the corrosion resistance, wear resistance and heat resistance.
【Package List】 1x suction cup holder, 1x 1/4" thread adapter, 1x 1/8" thread adapter, 1x disassembly tool (small screwdriver, small screw)

Rank No. #13

Suction Cup Mount for Yi Dash Cam 2.7', Uniden Dashcam, Black Box G1w Dash Camera etc, Hold Tightly Removeable Easy to Install and Stand Heat, 2 Pcs

Stick to Window Strongly And Stand Heat Well. Our Experiment shows this suction mount can hang up 9 POUNDS of cola, the yi car camera weights about 0.5 pound, this suction cup mount can hold the YI dash cam tightly even in a bouncy work truck
SIMPLE structure and FRIENDLY design, EASY to install, EASY to remove and reposition, EASY to adjust angle of the yi Smart Dash Cam to get a good view
Fits Most Popular Dash Camera for Cars, Two different sizes of joints,as shown in the figure, fits most dash cam, such Like G1W/ YI camera dash /Z-Edge/BlackBox/Spy Tec/Transcend/DOD/Papago/Vicovation/HP...
One Year Guarantee. Any problem in one year, just get a new one or MONEY BACK. We provide 2 suction mounts, but it doesn’t mean they are poor quality, we just want to give you more benefit

Rank No. #14

YeeBeny Dash Cam Mount Rear View Mirror Holder, Redtiger Dash Cam Mount Be Applicable to REDTIGER F7N-Plus

Applicable Products: Redtiger Dash Cam Mount Be Applicable to REDTIGER F7N-PLUS
Structure and Size: Ultra-slim 9.70mm design, and Clamping Diameter range:13-65mm(0.5-25.6in), very easy to install and suits most of car rear view mirrors (MIRROR POLE AT LEAST 0.4”).
Anti-Skidding and Durability: Sturdy design prevents slipping and breaking. It is heat-resistant and will never fall off.
Damage Prevention: Instead of sticking dash cam on windshield just mounts your dash cam behind car rearview mirror, no damage to windshield and provides better drivers' view. Please make sure the rear view mirror has space (NOT LESS THAN 0.4 INCH).
Flexibility: Real 360 degree rotation design, adjust to any angle you want, be it horizontally or vertically.

SaleRank No. #15

Dash Cam Mount, Universal Dash Camera Rear View Mirror Mount Holder Kit for YI, Rexing V1P, APEMAN, Anker Roav, Falcon F170, VANTRUE, Z-Edge, Old Shark, KDLINKS X1, E-ACE, Peztio and Most Other

☑️ PERFECT COMPATIBILITY: New 16 different joints kit suitable for 99% (NOT ALL) dash camera, Action Camera, GPS and more. The ball dia of the dash cam mount is 0.63inch. ⚠️For easy installation, please make sure the car rearview has (MORE THAN 0.4 INCH) space on the back of the mirror.
☑️ BEST DASH CAM COMPANION: Mount your dash cam behind the center of the windshield to make a safe driving, since it allows them to record a clear unobstructed view ahead and doesn't interfere with the view when driving.
☑️ STRONG PIPE MOUNT: Tool-less and easy to install & removed, the mirror dash cam mount would be easy to lock on car rear view mirror/bike/motorcycle handlebar and any round pipe dia, Come with two long screws and two short screws, From 0.5- 2.6 inches. ⚠️Kindly check pictures for reference before purchased.
☑️ 360° ROTATION FREEDOM: Adjustable ball and socket joint, real 360-degree rotation design, adjust to any angle you need, be it horizontally or vertically, the dash cam mirror mount is completely at your disposal.
☑️ ANTI-SKIDDING AND PROTECTIVENESS: Position fixing with practical locking nut, durable construction prevents slipping and breaking and heat-resistant, dashcams for cars never fall off the windshield.

Rank No. #16

Sportway S503 Suction Cup Dash Cam Mount Holder (5th Gen) with 3pcs 360 Rotating Joints for Rove Nexar Z-Edge Kingslim iiwey NIUTA and Most Other Car Dash Cameras

★S503 dash cam mount is the newest version, it is 1/2 smaller than the old model, compact and does not affect the sightline, size with 3 different joints suitable for most popular brand dash cam, such as Rove dash cam, Nexar dash cam, Z-Edge dash cam, Kingslim dash cam, iiwey dash cam, NIUTA dash cam, and most other car dash cameras.
★ [360 Degrees Rotation] Adjust the 360 degrees joint to get any angle you need, providing you with the best viewing to keep secure driving. Just enjoy the best driving experience.
★The dash cam mount uses POM+ABS plastic , Sturdy and heat resistant. The suction cup used PVC material, diameter 53cm. Remove the mount easily by pulling the suction clip without leaving any nasty marks.
★Secure & Stable, Sportway dash cam mount featured with upgraded super strong suction cup, The rotary type instead of the press type can better discharge the air in the suction cup and reach the vacuum state. Even on the bumpiest road, It is still easy to sticks securely on the windshield or dashboard. Just make sure to remove all air from underneath. The suction mount is made of high-quality material which make it be able to work for a long time.
★Easy to Install and remove, Remove the suction cup protective film, fix it on on the Windshield, press the suction cup firmly to exhaust the air, then twist right to lock it on the surface area, twist left to unlock it, make it easy to place dash cam wherever you need.

Rank No. #17

Dash Cam Suction Cup Mount, Camera Holder Window Bracket, Universal Dash Camera View Mirror Mount Driving Video Recorder Holder, 2 Pcs

★[Universal Compatible] 2 Pcs dash cam suitable for most dash cam.
★[Widely Rotation] Swivel ball adapter head provides flexibility for positioning the camera.
★[Easy to install] Simple structure, easy to install, easy to remove and reposition, easy to adjust angle of the dash cam to get a good view
★[Strong Suction Power] This windshield mount can hang up 9 pounds of cola, dashcam usually weights about 0.5 pound, this suction cup mount can hold it tightly even in a bouncy work truck.
★[Premium Quality] The suction mount is made of high-quality material which make it be able to work for a long time. Easy to remove and long time used.

Rank No. #18

OctinPris Dash Camera Suction Cup Mount Dashcam Mounts Holder with 13 Ball Joints Adapter for Vehicle Video Recorder Windshield & Dashboard for Dash Car DVR Camera GPS

Car dashboard/windshield rotating 360 Degree mount holder for car DVR GPS Camcorder holder.
Swivel ball adapter head provides flexibility for positioning the camera. Different joints kit to suit most Car Dash Camera, GPS, Action Camera.
Attaching to a clean and smooth surface to get maximum holding strength.
New 13 different joints kit suitable for most car dash cam, camcorder DVR on the market, include Rexing V1, Z Edge,Falcon F170, Old Shark, YI, Amebay, KDLINKS X1, VANTRUE, G1W G1W-H G1W-C G1W-B LS300W GT550S and other hot selling dash cam.
PVC windshield suction performs well in hot climates. Dashboard suction cup diameter 5cm/1.97inch.

SaleRank No. #19

Dash Cam Mount Holder - Mirror Mount, Come with 10+ Different Joints, Compatible with APEMAN, Falcon F170, Old Shark, Peztio, Rexing V1P, Roav, UGSHDI, Z-Edge，YI，Kdlinks X1, and Most Dash Cameras /GPS

Ultra-slim 9.70mm design, and Clamping Diameter range:13-65mm(0.5-25.6in), very easy to install and suit most of car rearview mirrors (MIRROR POLE AT LEST 0.4”).
Real 360 degree rotation design, adjust to any angle you want, be it horizontally or vertically, providing the perfect viewing angle.
Mount your dash cam behind car rearview mirror, without blacking your drivers’ view, prevents your dash cam from swinging or falling down.
Easy to install and remove, the soft padding ensures a firm mount and avoids damaging the surface to your rear view mirror pole. anti-skidding and protectiveness.
Comes with 10+ different joints, works well compatitle with Rexing, Yi, Roav, zhiroad, Byakov, Pathinglek, Trekpow, oldshark and most other dash cameras. Not compatible Garmin Dash Cam.

Rank No. #20

Sportway S60 Dash Cam Mirror Mount with 10pcs Joints Kit for Rove APEMAN CHORTAU Roav Nexar iiwey YI Z-Edge Old Shark Rexing KDLINKS Falcon Zero Transcend Crosstour VANTRUE... Most Car Dash Cameras

★S60 with 10 different joints, suitable for most popular brand dash cam, such as Z-Edge/ YI /OldShark/Falcon Zero/G1W, G1W-B, G1W-C, G1W-CB.../HP /Transcend/ TaoTronics......For the corresponding brand and model, please check the picture .
★Ultra-slim 9.70mm design,and Clamping Diameter range:13-51mm(0.5-2.0inch), very easy to install and suit most of car rearview mirrors
★Real 360 degree rotation design, adjust to any angle you want
★Using POM plastics and rubber material and Screw,Net weight: 56g, Bearing weight: up to 10kgs (22Ib)
★Never fall off the windshield like the suction cup holder.

Last update on 2023-08-10 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Rexing Dash Cam Suction Cup?

Do you get stressed out thinking about shopping for a great Rexing Dash Cam Suction Cup? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Rexing Dash Cam Suction Cup, which is why we have assembled a comprehensive list of the greatest Rexing Dash Cam Suction Cup available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Rexing Dash Cam Suction Cup that you consider buying. Your questions might include the following:

Is it worth buying an Rexing Dash Cam Suction Cup?
What benefits are there with buying an Rexing Dash Cam Suction Cup?
What factors deserve consideration when shopping for an effective Rexing Dash Cam Suction Cup?
Why is it crucial to invest in any Rexing Dash Cam Suction Cup, much less the best one?
Which Rexing Dash Cam Suction Cup are good in the current market?
Where can you find information like this about Rexing Dash Cam Suction Cup?

We’re convinced that you likely have far more questions than just these regarding Rexing Dash Cam Suction Cup, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Rexing Dash Cam Suction Cup, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Rexing Dash Cam Suction Cup. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Rexing Dash Cam Suction Cup buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Rexing Dash Cam Suction Cup currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Rexing Dash Cam Suction Cup has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Rexing Dash Cam Suction Cup?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Rexing Dash Cam Suction Cup.
Customer Ratings: Number ratings grade Rexing Dash Cam Suction Cup objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Rexing Dash Cam Suction Cup.
Product Quality: You don’t always get what you pay for with an Rexing Dash Cam Suction Cup, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Rexing Dash Cam Suction Cup is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Rexing Dash Cam Suction Cup information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Rexing Dash Cam Suction Cup is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What makes the Rexing V3 plus full HD dashcam so special?

A: The Full HD front and rear cameras feature Wide Dynamic Range technology for optimal performance in low-light situations, while a built-in GPS logger tracks important metrics in case of a driving incident. This Rexing V3 Plus dashcam uses a temperature-resistant supercapacitor for added reliability.

Q: What kind of camera does Rexing v1p have?

A: Rexing V1P 3rd Gen Dash Cam, Front and Rear 1080p Full HD, 170° Wide Angle, Wi-Fi & Supercapacitor, 2.4″ LCD Screen, G-Sensor, Loop Recording, Mobile App Record road scenes in Full HD with these front and rear Rexing dash cameras.

Q: How does the dash cam work on the v1p?

A: DUAL CHANNEL RECORDING & DISCREET DESIGN DASH CAM: Signature low-profile design allows the V1P to be a well-hidden witness to the road ahead. Record from two separate perspectives by connecting the included REAR CAMERA to the front camera.