Contents
The Best Seismic Subwoofer of 2023 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Seismic Subwoofer of 2023. Check our ranking below.
2,949 Reviews Scanned
- Model: Shockwave-12 | Active 12" Subwoofer Cabinet
- Active / Passive: Active (Powered) - Class D Amplifier Built-In | Great for Pro Audio, DJ, Clubs, Bars, or any medium to smaller sized venues
- Power Rating: 400 Watts RMS; 800 Watts Peak | Frequency Response: 30 Hz - 200 Hz | Connector(s):Two Line Input/Output - XLR | LPF (Low Pass Filter): 40 Hz - 250 Hz | Nominal Impedance: 4 Ohms
- Woofer Size: 12" | Magnet Size: 50 oz | Voice Coil: 2" Voice Coil | Volume Controls: Master Volume (Gain) Control | Polarity Switch | Protection: DC, Short Circuit, RF Protection | Fan Cooled
- 100 Hz Low_Cut Out (L and/or R) | THD (Total Harmonic Distortion): < = 0.1% | Sensitivity: 93dB | SPL: 122dB | Crossover Point: 150Hz | 5/8" Plywood Front Panel and MDF | Full Metal Grill | Black Carpet with Black Metal Corners | Height: 19" | Width: 16" | Depth: 20" | Weight: 50.7 lbs per Cabinet
- Model Number Tremor_18-PW
- 18 Inch Powered Subwoofer
- Woofer has 90 oz. Magnet and 3 inch Voice Coil
- 500 Watts RMS - 1000 Watts Peak
- One Year Warranty
- Model # - SAP-18SFF - 500 Watts RMS -1000 Watts Peak
- Woofer -High Power 18" subwoofer Loud Speaker. Has a 90oz magnet w/ a 3” kapton voice coil
- Wired at 8 ohms. 30Hz –125Hz. Sensitivity: 98 db. 3/4 Plywood Front Panel
- Black carpet with black corners. Recessed Black handles. Input terminal with two 1/4" inputs & two Speakons
- Speaker Mount on top of cabinet. 28” tall -20” wide -20” deep
- Model: Tower1 | Powered Portable Column Array PA System | 10 Inch Subwoofer with 4x3 Inch Column Array Speaker | Built-In Mixer and Bluetooth
- Active 10" Sub Cabinet | Class D Power Amplifier | Column Speaker houses four 3 inch Speakers | System Power 450W | Power Rating: (RMS/Peak) SUB:150W/300W: TOP:80W/160W | Wireless Connectivity: Bluetooth Technology Built in (Stereo Wireless)
- Frequency Response: 45Hz-19KHz | Max SPL (peak) 120dB | Connectors: 1 - Mic/Line, 1 - Mic/Line Jack(combo), 1 - 3.5mm Jack, 1 - RCA(input), 1 - RCA(AUX Out) | Satellites connectors: Multi-Pin connector | Controls Master Level, CH1-CH4 Level, Line/MIC, Master Level, Hi/Low EQ
- Features: MP3 Player | Bluetooth 4.0 Stereo | Effects Delay | Cooling Convection | Protection: Short Circuit, Over-Current, Limiter, Over temp, Soft start | Indicators: Power, Signal, Limiter
- Construction: Cabinet Material ABS | Powdered Coating | Dimensions: Subwoofer: 24" x 22.5" x 23.25" | Weight: 48.5 lbs | Designed for Easy Set Up and Tear Down
- Model #: New Madrid 18
- Type: 18" Woofer/Speaker. Power RMS: 750 Watts. Power Peak: 1500 Watts
- Frequency Response: 25-2K Hz. Sensitivity: 102 db. Magnet: 240 oz. Voice Coil: 4"
- Impedance: 8 Ohm. Die Cast Aluminum Chassis. Paper cone. Cloth Edge
- This woofer is brand new. One year warranty
- Model: SA-PGSV12LED | Dual 12 Inch 1200 Watt Car Audio Subwoofer Box
- Built-In Multi-Mode LED Lights Integrated with Plexiglass Front Window | Power Rating: 2 x 600 Watts Max Power
- High Powered Dual 12 inch Woofers with a Non-Pressed Paper Cone and Specially Treated Foam Surround with Rubber Edge Suspension | Smooth Carpet Finish
- Voice Coil: 2 inch 4 Layer Dual Voice Coil | Impedance: 4 Ohms | Magnet: 2 x 50 Ounce | Sensitivity: 91 dB | Frequency Response: 25-300Hz
- Separate Chambers with Vented Design for Ultimate Bass Response | Binding Post Connectors | Remote and 12V Adapter Included | Dimensions: 30" x 14" x 14.5" | Weight: 46.3 lbs
- Model: OutRage10 | 10 Inch 800 Watt Car Audio Subwoofer Box
- Rear Vented Design for Maximum Bass Output | Power Rating: 800 Watts Max Power
- High Powered 10 inch Woofers with a Non-Pressed Paper Cone and Specially Treated Foam Surround with Rubber Edge Suspension | Smooth Carpet Finish
- Voice Coil: 2 inch 4 Layer Dual Voice Coil | Impedance: 2 Ohms | Magnet: 2 x 40 Ounce
- Sensitivity: 90 dB | Frequency Response: 30-200Hz | Binding Post Connectors | Dimensions: 14.9" x 12.6" x 11.8" | Weight: 29.8 lbs
- Model # - SAP-18SFFEmpty | Empty 18" Pro Audio Subwoofer Cabinet
- Load with your own Speakers | Speaker Wire, Jack Plate included | Speaker mounts on top of cabinet
- Recessed Metal Handles | Jack Plate with Two 1/4" inputs and Two Speakon inputs
- 5/8" Plywood Construction | Full Metal Grill | Black Carpet with Black Metal Corners
- Dimensions: 28" x 22" x 22" | Weight - 55 lbs each
- Model: SA-BPT10-A | Active 10 Inch Car Audio Subwoofer Tube Enclosure | High Powered Tube Enclosure with Class D Amplifier and Carpet Finis
- Power Rating: 500 Watts Max Power
- High Powered 10 inch Woofer with a Non-Pressed Paper Cone and Specially Treated Foam Surround with Rubber Edge Suspension
- Voice Coil: 2 inch 4 Layer Voice Coil | Impedance: 4 Ohms | Magnet: 40 Ounce | Sensitivity: 90 dB
- Frequency Response: 35-500Hz | Rear Vented Design for Ultimate Bass Response | Dimensions: 21.6" x 12.2" x 11.4" | Weight: 26.4 lbs
- PA Speaker: The Seismic Audio Fury Series of powered loudspeakers offer a superior audio experience! These active 2-way PA or DJ speakers are durable, super-affordable, and produce superior quality sound across all ranges.
- Bluetooth PA Speaker: The Fury Series is one of the best-sounding speakers we have produced to date. They boast numerous cool features such as LED Display, DSP, built-in Bluetooth, Mixer, and a powerful, super-efficient Class D amplifier.
- 15 inch speaker system: You will be amazed at not only the crystal-clear highs, but the deep, low-end response from this all-new line of PA/DJ speakers. The 15” woofer has a 50 oz magnet, and a 3” voice coil with a 1.35” titanium compression driver.
- In-Built Amplifier: Our 1000W Speaker comes equipped with a built in amplifier which has a peak power of LF 800W + HF 200W, and a THD of only 0.05%. The floor monitors come with a pole mount & multiple fly points to fix them as PA speakers.
- Versatile Connections: If you’re looking for versatility, then this is the perfect speaker for you! It has various input connectors, XLR / 1/4 inch combo jack x 2 (accepts mic, line & instrument) & aux input. It has an XLR male output.
- MODEL - Baby Tremor
- CONTENTS - 15" Subwoofer Cabinet
- CONDITION New
- APPLICATION Subwoofer / PA Subwoofer / DJ Subwoofer
- POWER - 300 Watts RMS ; 600 Watts Peak
- Model: SkinnyThump | Active Under Seat Mount 10 Inch 600 Watt Car/Truck Sub Enclosure
- Built-In Class D Power Amplifier | Power Rating: 300 Watts RMS | 600 Watts Max Power
- High Powered 10 inch Woofer | High-Quality thin aluminum box enclosure | Frequency Response: 20Hz-150Hz | Impedance: 4 Ohms | THD: <0.4% | Signal to Noise Ratio: >90dB
- Input Sensitivity, High level: 0.9V | Input Sensitivity, Low level: 300mV | Low Pass Filter: 50Hz-150Hz | Bass Boost: 0 to +12dB | Subsonic Filter: 20Hz | Inputs: RCA and High Level | Gain Control | Fuse Rating: b25A
- Remote Control to adjust the sound to your preference | Dimensions: 13.5" x 10.25" x 2.75" | Weight: 10.2 lbs
- Model: SA-BPT08-A Active 8 Inch Car Audio Subwoofer Tube Enclosure | High Powered Tube Enclosure with Class D Amplifier and Carpet Finish
- Power Rating: 400 Watts Max Power
- High Powered 8 inch Woofer with a Non-Pressed Paper Cone and Specially Treated Foam Surround with Rubber Edge Suspension
- Voice Coil: 1.5 inch 4 Layer Voice Coil | Impedance: 4 Ohms | Magnet: 30 Ounce | Sensitivity: 89 dB
- Frequency Response: 40-800Hz | Rear Vented Design for Ultimate Bass Response | Dimensions: 21.6" x 10.1" x 9.29" | Weight: 16.5 lbs
- Model #: San Andreas
- Type: 18" Woofer/Speaker. Power RMS: 500 Watts. Power Peak: 1000 Watts
- Frequency Response: 35-2K Hz. Sensitivity: 100 db. Magnet: 120 oz. Voice Coil: 4"
- Impedance: 8 Ohm. Die Cast Aluminum Chassis. Paper cone. Cloth Edge
- This woofer is brand new. One year warranty
- Model # - SA-18SE
- No Speaker - Comes with everything but the speaker
- 3/4 Plywood Front Panel, Includes handle, grill, wire, jack plate, etc.
- Black carpet with black corners. Recessed Black handles. Input terminal with two 1/4" and speak on inputs
- Speaker Mount on top of cabinet. 28” tall -20” wide -20” deep
- 500 Watts RMS; 1000 Watts Peak; Impedance: 4 Ohms
- Each Woofer has 50 oz magnet and 2" voice coil
- Two 2x5 Tweeter
- Frequency Response: 30Hz to 20kHz
- Steel Grill over each speaker
- Model: Hide-A-Bump88 | Dual 8 Inch Active Hidden Car Audio Subwoofer for Spare Tire Mount
- Power Rating: Peak Power - 400 Watts | Built-In Class D Amp | Sealed Enclosure with Aluminum Cone with Specially Treated Foam Surround
- Dual 5x8 Aluminum Woofers | Impedance: Dual 2 Ohm | Frequency Response: 40Hz-150Hz
- Variable Crossover Frequencies: 50Hz-100Hz | Sensitivity: 92 dB | Inputs: Speaker and RCA level inputs
- Features: Remote control for volume control, low-pass control, and phase switch | Auto switch-on - The speakers level input and RCA input will sense voltage automatically on the speaker wires and switch itself on if a music signal is received. If there is no music signal, it will automatically shut off. | Dimensions: 14 inch Total Diameter | 11 Inch Woofer Diameter | 6 inch depth | Phase: 0/180 | Fuse: 10A | Supply Voltage: 14.4V DC | Weight: 17.1 lbs
- Seismic Audio - Baby-Tremor_Empty - Empty 15" Subwoofer Cabinet - PA / DJ / Band Live Sound Loudspeaker
- CONTENTS: Empty 15" Subwoofer Cabinet
- CONDITION: New
- APPLICATION: Subwoofer | PA Subwoofer | DJ Subwoofer
- ACTIVE/PASSIVE: Passive
- Model #: Seismic Audio - Quake 18
- Type: 18" Woofer/Speaker. Power RMS: 500 Watts. Power Peak: 1000 Watts
- Frequency Response: 35-3K Hz. Sensitivity: 97 db. Magnet: 2x90 oz. Voice Coil: 3"
- Impedance: 8 Ohm. Pressed Steel Chassis. Paper cone
- This speaker is brand new. One year warranty.
- SA 15's have 15" woofer. 350 W RMS - 700 Peak. Titanium Horn. 8 ohms. 45Hz - 20KHz.
- Sensitivity 96 db. 2-way Crossover. 5/8" Plywood Front Panel. Two 1/4" & Two Speakon Inputs.
- Recessed Handles. Full Metal Grill. Dual Ports. 1.5" Metal Tripod Speaker Stand Mount.
- SA 18" Subs is a 18" Passive Subwoofers. 500 W RMS - 1000 Peak. 30Hz to 500Hz.
- 8 Ohms. Sensitivity 98 db. Speaker Mounts on Top. Two 1/4" & Two Speakon Inputs.
Last update on 2024-02-10 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Seismic Subwoofer?
Do you get stressed out thinking about shopping for a great Seismic Subwoofer? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Seismic Subwoofer, which is why we have assembled a comprehensive list of the greatest Seismic Subwoofer available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Seismic Subwoofer that you consider buying. Your questions might include the following:
- Is it worth buying an Seismic Subwoofer?
- What benefits are there with buying an Seismic Subwoofer?
- What factors deserve consideration when shopping for an effective Seismic Subwoofer?
- Why is it crucial to invest in any Seismic Subwoofer, much less the best one?
- Which Seismic Subwoofer are good in the current market?
- Where can you find information like this about Seismic Subwoofer?
We’re convinced that you likely have far more questions than just these regarding Seismic Subwoofer, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Seismic Subwoofer, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Seismic Subwoofer. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Seismic Subwoofer buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Seismic Subwoofer currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Seismic Subwoofer has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Seismic Subwoofer?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Seismic Subwoofer.
- Customer Ratings: Number ratings grade Seismic Subwoofer objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Seismic Subwoofer.
- Product Quality: You don’t always get what you pay for with an Seismic Subwoofer, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Seismic Subwoofer is should be an indication of how long it will work out for you.
We always remember that maintaining Seismic Subwoofer information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Seismic Subwoofer is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
FAQ:
Q: What kind of subwoofer is the paradigm seismic 110?
A: PARADIGM REFERENCE SEISMIC 110 SUBWOOFER The Paradigm Seismic 110 subwoofer is a freak. It is very small, lightweight as subwoofers go; yet capable of playing very loud, very low, and very clean. It will blow away subwoofers that are bigger, heavier, and in some cases, more expensive.
Q: Who are the customers of seismic audio speakers?
A: The customers who shop at Seismic Audio Speakers range from first time musicians to professionals who have been playing for years. Seismic Audio Speakers caters to a wide range of industries and business professionals including Disc Jockeys.
Q: How much does a PBK kit cost for a seismic subwoofer?
A: The PBK kit itself (comprising microphone, mic stand, USB cables and PC based software) is a £299 extra. You can either opt to buy this outright, or I have seen dealers who will use their PBK to install the subwoofer for a one off fee.
Q: Which is the best subwoofer for the studio?
A: For the ultimate studio subwoofer experience, choose Seismic Audio powered studio subwoofers. They are designed for Studio use and high quality components provide for even louder, clearer sound. Using powered subwoofers also allows you to eliminate the amplifier in your audio system set up, so it’s one less thing to worry about.
Related Post:
- Seismic Audio
- Dreadnought Seismic Hammer
- Seismic Audio Powered Subwoofers
- Seismic Audio Powered Subwoofers
- Alegria Keli Seismic
- Seismic Audio Samrc 12U
- Seismic Audio Sala 210
- Klipsch Reference Subwoofer R 10Sw R 12Sw Subwoofer
- Bose 700 Subwoofer Vs Sonos Subwoofer
- Bluetooth Speakers Wireless Stereo Subwoofer Smart Touch Lamp Color Changing