The Best Stepper Motor 12V of 2023 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Stepper Motor 12V of 2023. Check our ranking below.
2,341 Reviews Scanned
Rank No. #1
STEPPERONLINE 5PCS Nema 17 Stepper Motor 1.5A 12V 45Ncm (63.74oz.in) 4-Lead 39mm Body W/ 1m Cable and Connector for DIY CNC/ 3D Printer/Extruder
- 5 PCS, High torque Low noise
- Nema 17 stepper motor with step angle 1.8deg
- Holding Torque: 45Ncm(63.74oz.in), 12-24 VDC
- Rated Current/phase: 1.50A & Phase Resistance: 2.3ohms
- Build with 1m Pin Connector
Rank No. #2
diymore CNC Stepper Motor Nema 5-Set DC Motors12V 28BYJ-48 Stepper Motor Controller Servo Motors Stepper Motor Kit with 12V ULN2003 Drive Boards
- Stepper motor and ULN2003 driver board compatible with 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi
- Rated voltage: 12V DC; Stepping angle 5.625°/64, DC resistance 200Ω±7%, 4 phase 5 wire
- A, B, C, D fou phases of the stepper motor work.
- Stepper motor with a standard interface, when used directly pluggable
- Low noise, low vibration, low heat generation
Rank No. #3
STEPPERONLINE Nema 17 Stepper Motor 26Ncm(36.8oz.in) 12V 0.4A 3D Printer CNC
- Small Size, High Efficient
- 26Ncm(36.8oz.in) holding torque
- NEMA 17 bipolar 1.65"x1.65"x1.34"
- 1.8 deg. step angle(200 steps/rev)
- Rated current 0.4A & resistance 30ohms
Rank No. #4
uxcell 24BYJ48 DC 12V Reduction Stepper Motor Micro Reducer Stepping Motor 4-Phase 5-Wire
- Voltage: DC 12V; Phase: 4 phase 5 wire; Model: 24BYJ48 Reducer Motor
- Shaft Size: 5 x 8.5mm/0.2 x 0.33inch(Dia*H); Motor Size: 24 x 19mm/0.94 x 0.75inch(Dia*H)
- High step accuracy and resolution. low vibration and noise.
- Stable and reliable performance, high efficiency; Excellent quality and long service life
- Widely used on fan, warm air blower, electric heaters, burn oven, stage lighting equipment, microwave oven, lighting, Christmas gifts and other kinds of electrical appliances.
Rank No. #5
Rank No. #6
10RPM DC Worm Gear Motor 12V High Torque Reduction Gear Box with Encoder Srong Self-Locking 6mm Output Shaft
- FEATURES: Gearbox output shaft direction of the motor shaft is arranged vertically, the entire body of the motor output shaft relative to the general direction of gear motor short, widely adapted to a number of installation dimensions of the requirement occasion.
- STABLE PERFORMANCE: Using precious metals carbon brush.Long service life, low noise, large torque. Stable and reliable performance.Can rotate and reversal, work more accurate.
- SPECIFICATION: 12V; No-loading Revolving Speed: 100rpm / 40rpm / 30rpm / 20rpm / 10rpm(optional), there are a variety of models for you to choose.
- WIRING METHODS: Red: Motor power + (exchange can control rotating and reversing); Black: Coding power- negative (3.3-5V) polarity cannot be wrong; Yellow: feedback; Green: feedback; Blue:Coding power + positive(3.3-5V)polarity cannot be wrong; White:Motor power - (exchange can control rotating and reversing)
- QUALITY AFTER-SALE SERVICE: We care for every customers feeling. You can get in touch with customer service when you meet any question.
SaleRank No. #7
12V, 350mA, 28oz-in NEMA-17 Bipolar Stepper Motor
- Smooth motion and a nice holding torque
- 200 steps per revolution, 1.8 degrees
- Bipolar stepper, requires 2 full H-bridges!
- 12V rated voltage (you can drive it at a lower voltage, but the torque will drop) at 350mA max current
Rank No. #8
CenryKay DC 12V 28BYJ-48 Valve Stepper Motor 4 Phase Geared Stepper Motor（6PCS）
- ►Voltage: DC 12V; Phase: 4 phase 5 wire; Model: 24BYJ48 Reducer Motor
- ►Rated voltage: 12VDC; DC resistance: 300Ω±7% (25℃)
- ►High step accuracy and resolution. low vibration and noise.
- ►Widely used on fan, warm air blower, electric heaters, burn oven, stage lighting equipment, microwave oven, lighting, Christmas gifts and other kinds of electrical appliances.
- ►Package Included: 6 x 12v 28byj-48 stepper motor
Rank No. #9
SYUAB 6-Set 28BYJ-48 DC 12V Stepper Motor with ULN2003 Driver Board 4 Phase Compatible Raspberry Pi Arduino
- Stepper motor and driver board compatible with 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi
- Rated voltage: 12V DC; DC resistance: 300Ω±7% (25℃)4 phase 5 wire
- A, B, C, D four-phase LED indicates the status of the stepper motor work
- Stepper motor with a standard interface, when used directly pluggable
- High step accuracy and resolution. low vibration and noise
Rank No. #10
ACEIRMC 6pcs L9110S DC Motor Drive Module Stepper Motor Drive Controller Board 2.5-12V H-Bridge Can Drive Dual DC Motor at The Same time or 4 Wire 2 Phase Stepper Motor
- Double L9110S chip motor drive.
- Dual L9110S DC Stepper Motor Driver Board H-Bridge Motor drive
- Suitable motor range: The motor working voltage is between 2.5v-12v and the maximum working current is 0.8A. Currently the smart car voltage and current are all within this range.
- It can drive two DC motors or one 4-wire 2-phase stepper motor at the same time.
- PCB size: 2.8cm * 2.1cm ultra-small size, suitable for assembly. With a fixed mounting hole, diameter: 3mm.
Rank No. #11
Rank No. #12
Greartisan DC 12V 120RPM Turbo Worm Geared Motor High Torque Turbine Worm Gear Box Reduction Motor 6mm Shaft JSX69-370
- 【ALL-METAL GEARS】: High-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the turbo worm gear box motor body.
- 【PURE COPPER WIRE CORE ROTOR】: With precision winding technology, the turbo worm geared motor power instant increased by 30%.
- 【D SHAPED OUTPUT SHAFT】: Using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the turbo worm gear motor are improved, extremely durable.
- 【GEAR DC MOTOR with MICRO-TURBINE WORM】: You can change the wiring-connection to change motor rotation. Low noise and high torque.
- 【RELIABLE GURANTEE】: Any quality issues, we promise 100% unconditional return service. If you need other voltage and rpm, please feel free to contact us!
Rank No. #13
Maxmartt Stepper Motor Slider,DC 12V Stepper Motor with Linear Screw Nut Slider for DIY Laser Engraving Machine
- linear stepper motor 100% brand new and high quality.
- stepper motor with lead screw Moving 0.25mm for one step, can use microstep driver if need smaller.
- step actuator motor The maximum linear speed is 25mm per second.
- micro stepper motor actuator Widely used for small devices such as medical equipment, laser engraving machine, etc.
- linear stepper motor 12v The motor need a A4988 driver(not included) to drive, can not directly connect to power.
Rank No. #14
BRINGSMART 12V 40rpm DC Worm Gear Motor 40kg.cm Self-locking Reversed Engine Mini Turbine Geared Motor for DIY Robot Rotating Table Door Lock Curtain Machine (12V 40rpm)
- Rated voltage-12V DC, No load speed-40rpm, no load current-350mA, Rated speed-30rpm, rated torque-40kg.cm, rated current-1.6A, Reducer ratio-1:200
- Feature: Output Shaft Diameter: 8mm; The motor is Gear DC motor with micro-turbine worm, you can change the wiring-connection to change motor rotation. -Turbo worm geared motor with self-lock, that is, in the case of motor without electric, the output axis is fixed, self-lock. -The reducer output shaft arranged vertically with the motor shaft, whole motor output
- Application: bank equipment, safe box, paper feeder, intelligent gas meter, tissue machine, accessory of automobile, ad equipment, analysis instrument, electronic game machine,electrical appliances including remote control curtains, locks, paper shredders, copying machines, and safes Inner.
- What You Get: 1pcs x DC Geared Motor; if you need other voltage and rpm, pls contact us, there are many other models of this motor in store.
- Quality Guarantee: Authentic BRINGSMART brand, we are the ORIGINAL, now copied by many, but they cannot match our constant improvement of quality and personal customer care. Choose a brand you can trust, by people who use their own products. BRINGSMART you can believe in.
Rank No. #15
DC 5-12V/15-160V Stepper Motor Drive,PWM Adjustable Stepper Motor Controller Signal Generator Speed Regulator
- Power supply: 15-160VDC or 5-12VDC. If you are using 5-12VDC power, positive end connect DC 5-12V Input, negative end connect Common Cathode End.
- 3 Frequency: High: 5.8KHZ-127KHZ, Mid: 590HZ-15.8KHZ, Low: 82HZ-2.3KHZ
- To control the stepper motor, mus connect to the driver
- PUL + and PUL- pulsed positive and negative; EN + and EN- is to enable the positive and negative terminals; DIR + and DIR- are the positive and negative directions.
- Frequency of measurement can amount PUL and common cathode terminal (GND) two ports.
Rank No. #16
DC 5V-9V 12V 2 Phase 4 Wire Stepper Motor Linear Rail 90mm Stroke Lead Screw Linear Stage Actuator with Nut Slider Step Angle 18 Degree for DIY Laser Engraving Machine
- 【Fine Design】: This rail and linear block are small and light, especially suitable for small teams. The main body is made of metal, and the slider is plastic, the tool is simple and easy to use, strong and durable.
- 【Technical Data】: Drive Voltage: DC 5-12V/ max 800mA (the higher the voltage, the greater the force and the greater the heat); Step Angle: 18 degrees; Phase Resistance: 15.5 Ohms; Screw Shaft Length: 3.5"; Screw Shaft Diameter: 0.1"; Slider Width: 0.6"; Effective Stroke: 3.1"; Stage Size: 4.31" x 0.59" x 0.98".
- 【Note That】: This stepping motor direct power is not rotating, it need to stepper motor driver board. Search "B09BTWQPTB" to purchase it. Wiring method: Blue A +, Black A-, Red B +, Yellow B- .
- 【Application】: Stepper motor guide linear slide table can be used for DIY small slider projects, measuring equipment, laser printer, etc.
- 【Guarantee】: Our stepper motor are have 120 days warranty, if you have any question about this product, please feel free to contact us, we will try our best to help you solve your problem.
Rank No. #17
uxcell 2PCS 24BYJ48 DC 12V Reduction Stepper Motor Micro Reducer Stepping Motor 4-Phase 5-Wire
- Voltage: DC 12V; Phase: 4 phase 5 wire; Model: 24BYJ48 Reducer Motor
- Shaft Size: 5 x 8.5mm/0.2 x 0.33inch(Dia*H); Motor Size: 24 x 19mm/0.94 x 0.75inch(Dia*H)
- High step accuracy and resolution. low vibration and noise.
- Stable and reliable performance, high efficiency; Excellent quality and long service life
- Widely used on fan, warm air blower, electric heaters, burn oven, stage lighting equipment, microwave oven, lighting, Christmas gifts and other kinds of electrical appliances.
Rank No. #18
DC 12V Drive Stepper Motor Linear Screw Slider Stepper Motor for DIY Engraving Machine, 18 Degree Screw Worm Drive Stepper Motor
- DURABLE: The slide screw stepper motor made of high quality meterial, strong and durable in use, working voltage DC 9-12V.
- MAXIMUM LINEAR SPEED: The maximum linear speed of screw worm drive stepper motor is 25mm per second.
- APPLICATION: The DC 12V stepper motor widely used for small devices such as medical equipment, laser engraving machine, etc.
- PRODUCT PARAMETER: The linear screw stepper motor moves 0.25mm for one step, can use microstep driver if need smaller.
- NOTE: The stepper motor need a A4988 driver(not included) to drive, can not directly connect to power.
Rank No. #19
Stepper Motor, D8-MOTOR80 DC12V Moving 0.25mm One Step Stepper Motor with Linear Screw Nut Slider for DIY IR Engraving Machine,etc
- ♥ Fine design: This rail and linear block are small and light, especially suitable for small teams. The tool is simple and easy to use, strong and durable.
- ♥ Microstep controller: The motor requires an A4988 controller (not included), it cannot be connected directly to the power supply. The maximum linear speed is 25 mm per second. Moving 0.25mm in one step allows you to use a microstep controller in case a smaller one is required.
- ♥ Applications: widely used for automatic equipment, medical equipment, precision measuring instruments, engraving machines, other small linear slide devices, etc.
- ♥ Technical data: line voltage 12V DC; Current per phase 800 ma / phase; Temperature 0 ~ + 55 ° C; 80mm block stroke.
- ♥ Quality service: We attach great importance to our customers and make sure that customers get what they want. We love providing them with excellent customer service. If you have any questions, send us a message.
Rank No. #20
HiLetgo 5pcs L9110S DC Motor Drive Module Stepper Motor Drive Controller Board 2.5-12V H-Bridge Can Drive Dual DC Motor at The Same time or 4 Wire 2 Phase Stepper Motor
- HiLetgo L9110S H-bridge DC Stepper Motor Driver Controller Board
- Dual motor driver chip L9110S
- Module supply voltage :2.5-12V
Last update on 2023-08-06 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Stepper Motor 12V?
Do you get stressed out thinking about shopping for a great Stepper Motor 12V? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Stepper Motor 12V, which is why we have assembled a comprehensive list of the greatest Stepper Motor 12V available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Stepper Motor 12V that you consider buying. Your questions might include the following:
- Is it worth buying an Stepper Motor 12V?
- What benefits are there with buying an Stepper Motor 12V?
- What factors deserve consideration when shopping for an effective Stepper Motor 12V?
- Why is it crucial to invest in any Stepper Motor 12V, much less the best one?
- Which Stepper Motor 12V are good in the current market?
- Where can you find information like this about Stepper Motor 12V?
We’re convinced that you likely have far more questions than just these regarding Stepper Motor 12V, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Stepper Motor 12V, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Stepper Motor 12V. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Stepper Motor 12V buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Stepper Motor 12V currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Stepper Motor 12V has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Stepper Motor 12V?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Stepper Motor 12V.
- Customer Ratings: Number ratings grade Stepper Motor 12V objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Stepper Motor 12V.
- Product Quality: You don’t always get what you pay for with an Stepper Motor 12V, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Stepper Motor 12V is should be an indication of how long it will work out for you.
We always remember that maintaining Stepper Motor 12V information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Stepper Motor 12V is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.