Contents

The Best Stepper Motor Slider of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Stepper Motor Slider of 2023. Check our ranking below.

2,640 Reviews Scanned

Rank No. #1

DC 5V-9V 12V 2 Phase 4 Wire Stepper Motor Linear Rail 90mm Stroke Lead Screw Linear Stage Actuator with Nut Slider Step Angle 18 Degree for DIY Laser Engraving Machine

【Fine Design】: This rail and linear block are small and light, especially suitable for small teams. The main body is made of metal, and the slider is plastic, the tool is simple and easy to use, strong and durable.
【Technical Data】: Drive Voltage: DC 5-12V/ max 800mA (the higher the voltage, the greater the force and the greater the heat); Step Angle: 18 degrees; Phase Resistance: 15.5 Ohms; Screw Shaft Length: 3.5"; Screw Shaft Diameter: 0.1"; Slider Width: 0.6"; Effective Stroke: 3.1"; Stage Size: 4.31" x 0.59" x 0.98".
【Note That】: This stepping motor direct power is not rotating, it need to stepper motor driver board. Search "B09BTWQPTB" to purchase it. Wiring method: Blue A +, Black A-, Red B +, Yellow B- .
【Application】: Stepper motor guide linear slide table can be used for DIY small slider projects, measuring equipment, laser printer, etc.
【Guarantee】: Our stepper motor are have 120 days warranty, if you have any question about this product, please feel free to contact us, we will try our best to help you solve your problem.

Rank No. #2

DC 12V Drive Stepper Motor Linear Screw Slider Stepper Motor for DIY Engraving Machine, 18 Degree Screw Worm Drive Stepper Motor

DURABLE: The slide screw stepper motor made of high quality meterial, strong and durable in use, working voltage DC 9-12V.
MAXIMUM LINEAR SPEED: The maximum linear speed of screw worm drive stepper motor is 25mm per second.
APPLICATION: The DC 12V stepper motor widely used for small devices such as medical equipment, laser engraving machine, etc.
PRODUCT PARAMETER: The linear screw stepper motor moves 0.25mm for one step, can use microstep driver if need smaller.
NOTE: The stepper motor need a A4988 driver(not included) to drive, can not directly connect to power.

Rank No. #3

Acxico 2 pcs Mini 5mm 2-Phase 4-Wire 3V 5V Planetary Gear Stepper Motor Linear Screw Slider

The brand-new bulk miniature two-phase four wire 5mm stepping motor with planetary reducer, which is decelerated by metal gear, and then drives the precision diagonal bar to push the metal slider up and down. The bracket is basically made of metal.
Motor type: 2-phase 4-wire；Driving voltage: 4-6V；Screw length: 73mm；Screw diameter: 3mm；Slider Width: 12mm (to reduce shaking improve accuracy, the original 10mm now increased to 12mm).
Slide stroke: 61mm；Screw pitch: 3mm；Step angle: 18 °；Stages Size: 90 * 30mm.
Package includes:2 pcs Mini 5mm 2-phase 4-wire 3V 5V Planetary Gear Stepper Motor linear Screw Slider
We are very grateful to all customers for their suggestions to improve sales, if you are not satisfied, please contact us to find the best solution

Rank No. #4

Stepper Motor, D8-MOTOR80 DC12V Moving 0.25mm One Step Stepper Motor with Linear Screw Nut Slider for DIY IR Engraving Machine,etc

♥ Fine design: This rail and linear block are small and light, especially suitable for small teams. The tool is simple and easy to use, strong and durable.
♥ Microstep controller: The motor requires an A4988 controller (not included), it cannot be connected directly to the power supply. The maximum linear speed is 25 mm per second. Moving 0.25mm in one step allows you to use a microstep controller in case a smaller one is required.
♥ Applications: widely used for automatic equipment, medical equipment, precision measuring instruments, engraving machines, other small linear slide devices, etc.
♥ Technical data: line voltage 12V DC; Current per phase 800 ma / phase; Temperature 0 ~ + 55 ° C; 80mm block stroke.
♥ Quality service: We attach great importance to our customers and make sure that customers get what they want. We love providing them with excellent customer service. If you have any questions, send us a message.

Rank No. #5

Stepper Motor Linear 4‑Wire 80mm 2‑Phase Linear Moving Parts Stepper Motor Stroke for Small Slider Equipment Measurement Laser Printer

Can be used in DIY small slider/project/equipment measurement/laser printer
Adopt advanced technology with fine workmanship, which is a necessary linear moving parts
2‑phase 4‑wire micro stepper motor come with planetary gearbox, planetary gearbox reducer adopts all metal structure
Using high class materials with good quality to guarantee stable performance and high working efficiency
The stroke drive accurate diagonal lines to move the metal slider up and down, the bracket is basically made of metal structure

SaleRank No. #6

Mini Linear Lead Screw Nut Slider 2‑Phase 4‑Wire Stepper Motor Linear Screw Slide Table Slider Stroke 34mm

【All metal】 The linear screw adopts an all-metal structure, with fine workmanship, stable performance and high work efficiency, and is an essential part of linear motion.
【Size】 Screw length: about 45mm/1.8inch, screw diameter: about 3mm/0.1inch, pitch: about 0.5mm/0.02in (moving in one step is 0.025mm, if smaller, you can use a subdivision driver).
【2-phase 4-wire stepper motor】 With a miniature 2-phase 4-wire stepping motor, the slider stroke is about 34 mm/1.3 inches, and the motor diameter is about 20 mm/0.8 inches. The driving voltage of the motor is 5-9V/200-600mA (the higher the voltage, the greater the force Larger, the greater the calorific value).
【Easy to use】 The micro stepping motor slide table can drive the accurate diagonal to move the metal slide up and down.
【Application】 Stepper motor guide linear slide table can be used for DIY small slider/project/measurement equipment/laser printer, etc.

Rank No. #7

Acxico 1Pcs Mini Micro 4mm 5V 2-Phase 4-Wire Precision Planetary Gearbox Gear Stepper Motor Screw Metal Slider Nut

New micro 2-phase 4-wire 4mm stepper motor,with planetary gearbox(the outer diameter is only 4.25MM), and its planetary gears cannot be seen clearly with the naked eye. It can be distinguished by using an enlarged mirror. The entire metal slide is also very precise and stable.Connection of motor, gearbox and metal slide,all using laser welding points, is very precise and sturdy.
The motor drives the precise skewed lever to move the metal slider up and down.
The brackets are basically made of metal.
The spindle is made of ultra-fine precision ball bearings.
The difference between model A and B is just the length of the cable. The stepper motor, reducer, and metal slide are all the same.

Rank No. #8

Linear Stepper, Screw Motor, Stepper Motor Linear Screw Rail, Screw Stepper, Stepper Motor Slider, DC 12V Stepper Motor with Linear Screw Slider for DIY Engraving Machine

[Speed]: The maximum linear speed of this linear rail with screw is 25mm per second, you can set it according to your needs
[Speed]: The maximum linear speed of this linear rail with screw is 25mm per second, you can set it according to your needs
[Movement Distance]: This linear screw slider moves one step at a distance of 0.25mm; If you need a smaller distance, you can use a micro-step driver
[Widely Used in Small Equipment]: This linear motor rail can be widely used in small equipment, engraving machines, etc
[Driver Required]: This linear guide rail slide stepper motor cannot be directly connected to the power supply, it needs A4988 driver (not included) to drive

Rank No. #9

FUYU FSL30 Mini Linear Stage Small Slide Guide CNC Screw Lead Motion Table Motorized Nema 14 Stepper Motor[150mm Stroke]

Max horizontal loading 4kgs while max vertical loading 1kgs
Repeat position accuracy 0.05mm
Effective stroke: 150mm, have muliti choice from 50mm to 300mm stroke
Made Tr8*2 screw as default screw model, have Tr8*2,Tr8*4,Tr8*12 screw model for choice,contact us when need change screw model
Durable Nema 14 stepper motor has 10000 hours lifetime,have other motor for choice,contact us when need change motor.

Rank No. #10

CNC Sliding Table Lead Screw Precision Travel Length 50mm/100mm/150mm/200mm NEMA11 Linear Stepper Motor Guide Slide T-Shaped Screw line Rail Electric (24V,1.8°） (50mm)

【The meaning of T6 * 1-50mm】: T6 represents the diameter of the screw 6mm. * 1 represents the lead (pitch) of the screw 1mm (the distance that the motor moves once the slider moves). 50mm is the effective stroke of the slide table ( The distance the slider can move does not include the length of the slider)
【Specification】Stroke: 50MM； Screw diameter：6mm, Screw pitch: 1mm, Screw precision: 0.1mm, Maximum load level: 3KG, Vertical maximum load: 1KG, Torque: 0.07NM, Motor voltage: DC 24V, Motor current: 0.6A, Step angle: 1.8 degrees, Max speed: 120mm/min,
【Folding method】: horizontal cross, gantry type, three-axis type, four-axis type, multiple stacking methods can be stacked.
【Provide】:We also have Screw specification T6*2 , T6*4 , T6*6 , T6*12.if you need it,please contact us.
【Note】:Make sure you have the drive and controller, no drive and controller stepper motor will not work.Please contact us if you need it.

Rank No. #11

Linear Rail 50mm / 100mm / 150mm/ 200mm Linear Stage Actuator with Square Linear Rails Mini Slide Table + NEMA 11 Stepper Motor for DIY CNC Router Milling Machine (100mm)

100mm ( 4 inch ) Length Travel Linear Stage Work Table with NEMA 11 Stepper Motor;
Maximum load level: 3 KG , Vertical maximum load: 1 KG ;
With high precision, high efficiency, long life, low coefficient of friction, versatility, etc;
Made of high quality Aluminum alloy and stainless steel;
Screw Specification: T6*1. ( We also have Screw specification T6*2 , T6*4 , T6*6 , T6*12 , if you need change , please send us a message )

Rank No. #12

Maxmartt Stepper Motor Slider,DC 12V Stepper Motor with Linear Screw Nut Slider for DIY Laser Engraving Machine

linear stepper motor 100% brand new and high quality.
stepper motor with lead screw Moving 0.25mm for one step, can use microstep driver if need smaller.
step actuator motor The maximum linear speed is 25mm per second.
micro stepper motor actuator Widely used for small devices such as medical equipment, laser engraving machine, etc.
linear stepper motor 12v The motor need a A4988 driver(not included) to drive, can not directly connect to power.

Rank No. #13

DC 5V Micro 2-Phase 4-Wire Stepper Motor Linear Rail 48mm Stroke Linear Stage Actuator Lead Screw Slider Stepping Motor Small Electric Motor 18 Degree Step Angle

【Fine Design】: This rail and linear block are small and light, especially suitable for small teams. The tool is simple and easy to use, strong and durable.
【Technical Data】: Drive Voltage: 5V-12V / 100-300mA; Step Angle: 18 degrees; Stage Total Size: 3.2"x0.98"x0.78" (including motor); Sliding Block Size: 0.98"x0.39"x0.55"; Motor Diameter: 0.59"; Motor Length: 0.43"; Lead Screws Length: 2.36" ; Lead Screws diameter: 0.11"; Effective Slide Stroke Travel: 1.89"; Wire length: 4.72".
【Note That】: This stepping motor direct power is not rotating, it need to stepper motor driver board. Search "B09BTWQPTB" to purchase it. Wiring method: Yellow A+, White A-, Red B+, Black B-.
【Application】: Stepper motor guide linear slide table can be used for DIY small slider projects, measuring equipment, laser printer, etc.
【Guarantee】: Our stepper motor are have 120 days warranty, if you have any question about this product, please feel free to contact us, we will try our best to help you solve your problem.

Rank No. #14

FUYU FSL40 Linear Guide Rail Slide Ball Screw Motion Table CNC Linear Guide Stage Actuator Motorized Nema 23 Stepper Motor[350mm Stroke]

Special made nema 23 stepper motor with max speed up to 1200 rpm
Quality ball screw with accuracy up to ±0.03mm,also low noise when working
M4 screw on sideways to install end stop,and on base board for easy installnation
Oxided aluminum avoid rusting,extra support unit enhanced stability
have multi length stroke options from 50mm to 1000mm for cnc router device

Rank No. #15

TFCFL Linear Rail 100mm / 200mm / 300mm GGP Linear Stage Actuator with Square Linear Rails Mini Slide Table + NEMA 23 Stepper Motor for DIY CNC Router Milling Machine (300mm)

♒100mm / 200mm / 300mm Length Travel Linear Stage Work Table with NEMA23 Stepper Motor.
♒Horizontal load: 30kg-max 50kg , Vertical maximum load: 15kg;Speed:40-100mm/s.
♒With high precision, high efficiency, long life, low coefficient of friction, versatility, etc.
♒Made of high quality Aluminum alloy and stainless steel.
♒Main parameter: Nema 23 stepper motor;Diameter 57 * 56mm;Voltage: 24V;Current: 3A;Torque: 0.9NM.

Rank No. #16

RATTMMOTOR ZBX80 400mm Stroke CNC Linear Stage Motion Actuator X Y Z Axis Linear Slide Rail Aluminum Alloy Cross Sliding Table Linear Rail Guide SFU1605 Ballscrew+Nema23 57 Stepper Motor for CNC

Material: Aluminum Alloy; Effective Stroke: 400mm; Horizontally loadable: 80kg; Vertical carrying: 20kg; Width: 80mm.
Standard motor: 57 stepper motor 1.8° 2.8A 1.26N.m; Screw: Ballscrew drive 1605-diameter 16 pitch 5mm.
Total length of the linear Motion Actuator including the stepper motor : 630mm; Total length of the base plate without: 519mm.
Standard M5 mounting hole: M5 movable nuts are used on the sides and bottom to make the installation of the sliding table more flexible and changeable.
High speed slient, smooth running; SFU1605 ball screw, accuracy up to 0.03.

Rank No. #17

Punctualgood 3pcs Micro 4mm 5V 2-Phase 4-Wire Planetary Gear Stepper Motor Screw Slider Nut (Model A)

1. Slider stroke: about 12mm, Motor phase resistance: about 14.4 ohms.
2. The difference between model A and model B is the length of the cable. Stepper motor, reducer and metal slide rail are the same.
3. Brand new micro 2-phase 4-wire stepper motor,with planetary gearbox.
4.The planetary gearbox reducer adopts all-metal structure, including metal outer wall and secondary metal gears, and then drives the precise skewed grains to move the metal slider up and down.
5. The bracket is basically made of metal structure, and the screw uses ultra-miniature precision ball bearings.

Rank No. #18

DC 5V-12V 2-Phase 4-Wire Stepper Motor Linear Slider 100mm Stroke Guide Rail Slide Lead Screw Linear Stage Actuator w/Motion Sliding Table Stepping Motor for Engraving Machine Measuring Equipment

【Please NOTE before purchase】: 1. Because the main body of the product is made of plastic, it is normal for the product to have scratches. 2. The motor is a stock part, and the product will be shipped after power-on test, not a second-hand product. 3. In order to prevent the motor screw from rusting, the exterior of the product is coated with a little lubricating oil. So perfectionists please buy carefully.
This 35-type two-phase four-wire stepper motor, linear Stage Actuator with lead screw slide table, add a travel limit switch. Large torque, no reduction box, fast speed, slider accuracy of 0.1-0.2mm. (Please NOTE: The bottom of the slide table is raised due to the large size of the motor, which has nothing to do with quality issues.)
Motor Type: 2-phase 4-wire stepper motor (no gearbox); Motor Diameter: 1.37"; Drive Voltage: 5-12V / 500mA-2A; Motor Step Angle: 7.5°(that is, 48 pulses for one revolution); Wire Length: 3.93"; Wiring Method: Black A+, Brown A-, Yellow B+, Orange B-. Tips: The stepper motor direct power is not rotating, requires a dedicated stepper motor driver board. please search B09BTWQPTB.
Stage Total Size: 6.1" x1.96" x1.37" (including motor); Slide Table Size: 5.51"x1.96"x0.98"; Sliding Block Size: 1.96"x1.18"x0.78"; Lead Screw Length: 5.11"; Effective Slide Stroke: 3.93"; Lead Screw Diameter: 0.13"; Lead Screw Pitch: 0.09";
Product Usage: Mainly used forlaser engraving machine, DIY small slide, instrumentation, security, teaching experiment development, range finder, laser positioner, automation, toys, and other products.

Rank No. #19

Linear Actuator 2‑Phase 4‑Wire Linear Stepper Motor Screw Slide Table 4‑9V Drive Voltage 18° Step Angle for DIY Engraving Machine Small Measuring Equipment Slider with Linear Nut Slider

The maximum stroke of the stepper motor slider is 88mm, which is suitable for DIY small slider projects, measuring equipment and laser printers.
The motor slider is a miniature 2-phase 4-wire stepper motor with a planetary gear box, and the planetary gear reducer adopts an all-metal structure.
Linear Motion Guides drive precise diagonals, move the metal slider up and down, the bracket is basically made of metal structure, and the operation is simple and smooth.
2-phase 4-wire motor, driving voltage 4-9V / 100-500mA, step angle of 18°, with stable and professional performance.
The laser printer sliding table is made of high-quality stainless steel, which is durable, corrosion-resistant, durable and has a long service life.

Rank No. #20

RATTMMOTOR HBX1605 200mm / 7.87" Linear Motion Guide Actuator Double Linear Rail Slide 1605 Ballscrew Motorized XY XYZ Linear Stage Table Nema23 Stepper Motor for DIY CNC Router Engraver Machine

【Product Structure Analysis】- Nema23 stepper motor + motor flange plate + coupling + bearing support seat + double line rail slide table + 1605 ball screw + slide table + bearing seat + base. Horizontal load: 60KG/132.28 Ib ; Vertical load: 30KG/66.14 Ib.
【Nema23 Stepper Motor】- Motor length: 56mm. Motor flange size: 57mm. Holding torque: 1.2N.m. Phase: 2. Current: 3A. Resistance: 0.8 Ω. Inductance: 2.4mH. Rotor Inertia: 440g.cm. Wiring: Red(A+), Green(A-), Yellow(B+), Blue(B-).
【1605 Ball Screw】- Drive type:1605 ball screw. Effective travel length: 200mm/7.87inch. Screw precision grade: C7. Screw Pitch: 5mm. Flange nut screw rod with precision up to 0.003mm. High efficiency and low noise.
【Features】- Double line rail sliding table design, high precision, more stable operation. Adding bearing support seat, high concentricity. Sliding nut design on the side, limit switch can be installed at any position. The slider is made of 6030 aluminum and are oxidized, which is beautiful and generous.
【Main Application】- The important hardware equipment that constitutes industrialized machinery can accurately control the accuracy and speed of the moving parts of mechanical equipment. It is suitable for CNC machine, placement equipment, laser cutting equipment, spraying equipment, medical equipment, battery equipment and other industrial automation fields.

Last update on 2023-08-01 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Stepper Motor Slider?

Do you get stressed out thinking about shopping for a great Stepper Motor Slider? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Stepper Motor Slider, which is why we have assembled a comprehensive list of the greatest Stepper Motor Slider available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Stepper Motor Slider that you consider buying. Your questions might include the following:

Is it worth buying an Stepper Motor Slider?
What benefits are there with buying an Stepper Motor Slider?
What factors deserve consideration when shopping for an effective Stepper Motor Slider?
Why is it crucial to invest in any Stepper Motor Slider, much less the best one?
Which Stepper Motor Slider are good in the current market?
Where can you find information like this about Stepper Motor Slider?

We’re convinced that you likely have far more questions than just these regarding Stepper Motor Slider, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Stepper Motor Slider, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Stepper Motor Slider. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Stepper Motor Slider buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Stepper Motor Slider currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Stepper Motor Slider has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Stepper Motor Slider?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Stepper Motor Slider.
Customer Ratings: Number ratings grade Stepper Motor Slider objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Stepper Motor Slider.
Product Quality: You don’t always get what you pay for with an Stepper Motor Slider, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Stepper Motor Slider is should be an indication of how long it will work out for you.

We always remember that maintaining Stepper Motor Slider information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Stepper Motor Slider is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: How are stepper motors connected to easy driver boards?

A: To power the Stepper Motors connected to the Easy Driver boards we are using a 12V 1A power supply. The GND and 5V (out) of the Power Supply are connected to the breadboard power rails. GND and 5V (in) of the Easy Driver boards are connected to the breadboard power rails.

Q: What kind of motor does a linear slide use?

A: Compact, high-rigidity electric linear slides featuring AlphaStep AZ Series with absolute encoder stepper motor and driver combined with a simple, dust-resistant structure providing the high response, low vibration and hunting-free operation of a stepper motor in an electric linear slide.

Q: How does an Arduino control a stepper motor?

A: The stepper driver gets signals from the Arduino over 2 cables and it controlls the motor. The Arduino starts giving directions to the driver as soon as it gets power. 4 switches are used as some kind of combination lock to set the speed of the motion. Here is the Code.