Contents
The Best Sundown X12 D2 of 2023 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Sundown X12 D2 of 2023. Check our ranking below.
2,111 (random number) Reviews Scanned
- RMS Power: 1000-watts
- High Temperature copper voice coil wire
- Spring Loaded Terminals
- High strength cast aluminum frame
- Optimized for small ported, sealed, & band-pass enclosures
- The Sundown Audio U-12 is a 12-inch subwoofer with a 1500 watt RMS power rating. It has a frequency of 42.2 Hz and a DC resistance of 3.8 Ω. It also has a sealed and ported enclosure.
- Subwoofer The X V.3 series is the first driver in the Sundown woofer line-up to offer our "ultra high excursion" suspension and frame designs. The 10, 12, and 15" models feature
- our custom tooled and patented frames. We mate these new platforms to a triple stacked 190mm diameter motor structure featuring a hyper-extended pole and extreme clearances (allowing up to 4" p-p travel before mechanical bottom). This motor powers a 3" diameter 4-layer CCAW coil wound on a thick, black aluminum former to incredible levels ofexcursion.
- The X V.3 series was designed from the ground-up to become the new standard in the low-frequency / small ported box subwoofer category in this price range.
- The X V.3 series is really a different kind of woofer due to it's incredibly linear suspension. They are designed for the LOWEST level of bass extension possible while maintaining low levels of distortion. They are NOT a peaky SPL woofer -- these are true low distortion, high excursion bass transducers!
- Due to the extremely low level of suspension induced distortion the typical "punchy" upper-bass peak in the 40s-60s Hz range that occurs with traditional woofers when pushed to high excursion does not occur. This "punch" is caused by a tightening of the suspension over stroke leading to increased FS and Qts figures -- in other words it is distortion. In simpler terms -- the X series frequency response does not change much over it's full excursion range provided a consistant and flat response at any volume level. Once you experience and re-listen to all of your favorite music on a low distortion driver you are unlikely to go back!
- Authorized Sundown Audio Dealer
- 2 Years Warranty
- 12" 750W SA Series Subwoofer
- Dual 2-Ohm
- 750 watts RMS
- RE: 4.57 Ohms
- Fs: 33.71 Hz
- Sundown Audio X-10 V.3 D2 10" 2000W RMS Dual 2-Ohm X Series Subwoofer Power Handling: RMS = 2000 watts Voice Coil Configuration: Dual 2-ohm Vented magnetic gap Optimized high-velocity pole vent Innovative high-velocity vented frame spacer ring
- Black Aluminum 3” voice coil former for superior heat dissipation High Temperature Round-Wire CCAW voice coil with high-temp black adhesive All Aluminum Coil that is ~30% longer Large aluminum faraday ring (Magnet ID) Spring Loaded Terminals
- Stitched-On Double-XL Tinsel Leads to prevent fatigue and failure Mega-Roll Surround Technology High strength, custom tooled & patented cast aluminum frame Optimized for small ported & band-pass enclosures Recommended Ported Enclosure: 1.50 ft^3
- Displacement: 0.23 ft^3 Depth: 9" Outside Diameter 11.65" Cut-Out: 10.01" Recommended Tuning: 32hz Recommended Port Area: 24in^2 Weight: 58LB
- RE (Ohms) 3.2 FS (Hz) 40.208 VAS (L) 9.352 Qes 0.528 Qms 2.842 Qts 0.445 Le (mH) BL (NA) 21.509 Mms (Grams) 302.089 Cms (uM/N) 51.867 Sens (dB @ 1w/1m) 82.5dB
- 12-inch Dual 2 Ohm SPL Car Subwoofer
- Peak Power: 3,000 Watts | RMS Power: 1,500 Watts
- Massive Triple Stack Magnet & High Temperature 3" 8-layer Copper Voice Coil
- Competition Grade Paper Cone and High Roll Foam Surround
- Advanced Air Flow Cooling Design | Fs: 44.0 Hz, Xmax: 29mm
- SA-8 V.3 D2 - Sundown Audio 8" 500W RMS Dual 2-Ohm SA Series Subwoofer
- Specifications: DC Resistance (Re): 3.36 Ω | Resonance Frequency (Fs): 38.29 Hz | Equivalent Volume (Vas): 6.88 L | Electrical Q Factor (Qes): 0.324 | Mechanical Q Factor (Qms): 6.310 | Total Q Factor (Qts): 0.309 | Force Factor (BL): 18.94 NA | Moving Mass (incl. Air Load) (Mms): 144 g | Suspension Compliance (Cms): 120 μm/N | Sensitivity: 82.79 dB 1w / 1m
- Box Recommendations: Sealed Enclosure Suggestion: Not Recommended | Ported Enclosure Suggestion: 0.5 - 0.75 cu. ft. @ 35 Hz | Displacement: 0.08 cu. ft. | Depth: 6.625 in |Outside Diameter: 8.375 in | Cutout: 7.375 in
- RMS Power = 500-watts | Xmax = 14mm one-way by 70% BL | Vented magnetic gap
- Vented pole piece with optimized geometry | Black Aluminum 2.5” voice coil former for superior heat dissipation | High Temperature 4-Layer copper voice coil wire
- Spring Loaded Terminals | Stitched-On “Mini-XL” Tinsel Leads to prevent fatigue and failure
- Box Recommendations: Sealed: 1.0 ft^3 | Ported: 1.75 ft^3 | Displacement: 0.12 ft^3 | Depth: 6 1/2" | Outside Diameter: 12 1/4" | Cut-Out: 11 1/8" | Recommended Tuning: 32hz | Recommended Port Area: 28 in^2
- RMS Power: 1000-watts
- High Temperature copper voice coil wire
- Spring Loaded Terminals
- High strength cast aluminum frame
- Optimized for small ported, sealed, & band-pass enclosures
- Features and Specifications TBA
- Features: Black Aluminum 3” voice coil former for superior heat dissipation, High Temperature Round-Wire CCAW voice coil with high-temp black adhesive, Double stitched surround, Heavy duty cast basket, Spring loaded terminals accept up to 8 gauge, Stitched-on double-XL tinsel leads, Rear vented pole piece, Rear drilled gap-venting, Innovative high-velocity cast aluminum vented frame spacer ring, Magnet ID shorting ring, Top-Plate Cooling Channels, Cast Aluminum surround bolt-on rings, Optimized
- Specifications: 1500 Watts RMS | Linear X-Max by 70% | Magnet Diameter: 8.66 in. | DC Resistance (Re): 3.8 Ω | Resonance Frequency (Fs): 48.5 Hz | Equivalent Volume (Vas): 8.3 L | Electrical Q Factor (Qes): 0.35 | Mechanical Q Factor (Qms): 3.20 | Total Q Factor (Qts): 0.32 | Force Factor (BL): 26.8 NA | Moving Mass (incl. Air Load) (Mms): 216.3 g | Suspension Compliance (Cms): 0.05 mm/N | Sensitivity: 86.2 dB 1w / 1m
- Box Recommendations: Sealed Enclosure Suggestion: 0.5 cu. ft. | Ported Enclosure Suggestion: 1.0 cu. ft. | Displacement: 0.21 cu. ft. | Depth: 7.007 in |Outside Diameter: 10.94 in | Cutout: 9.17 in | Recommended Tuning: 32 Hz | Recommended Port Area: 16 sq. in.
- Sundown Audio U-15 D2 15" 1500W RMS Dual 2-Ohm U-Series Subwoofer
- Specifications: DC Resistance (Re): 3.8 Ω | Resonance Frequency (Fs): 37.9 Hz | Equivalent Volume (Vas): 54.0 L | Electrical Q Factor (Qes): 0.34 | Mechanical Q Factor (Qms): 3.10 | Total Q Factor (Qts): 0.31 | Voice Coil Inductance (Le): 2.44 mH | Force Factor (BL): 30.7 NA | Moving Mass (incl. Air Load) (Mms): 355.7 g | Suspension Compliance (Cms): 0.05 mm/N | Sensitivity: 91.2 dB 1w / 1m
- Box Recommendations: Sealed Enclosure Suggestion: 2.0 cu. ft. | Ported Enclosure Suggestion: 3.0 cu. ft. | Displacement: 0.24 cu. ft. | Depth: 9.05 in | Outside Diameter: 15.59 in | Cutout: 14.01 in | Recommended Tuning: 32 Hz | Recommended Port Area: 48 sq. in.
- SA-8 V.3- Sundown Audio 8 inch 500W RMS Dual 4-OhmSeries Subwoofer
- Specifications:Resistance (Re): 6.0 & 3A9; | Resonance Frequency (Fs): 40.0| Equivalent Volume (Vas): 7.17 L | Electrical Q Factor (Qes): 0.392 | Mechanical Q Factor (Qms): 4.310 | Total Q Factor (Qts): 0.360 | Force Factor (BL): 22.06| Moving Mass (incl. Air Load) (Mms): 126.6 g | Suspension Compliance (Cms): 125 & 3BC;m/N | Sensitivity: 82.711w / 1m
- Box Recommendations: Sealed Enclosure Suggestion: Not Recommended | Ported Enclosure Suggestion: 0.5 - 0.75 cu. ft.
- Hz | Displacement: 0.08 cu. ft. | Depth: 6.625|Outside Diameter: 8.375| Cutout: 7.375 in
- 12-inch Dual 2 Ohm Competition Grade Car Subwoofer
- Peak Power: 1,500 Watts | RMS Power: 1,000 Watts
- Massive Double Stack Magnet & High Temperature 2.5" Copper Voice Coil
- Competition Grade Paper Cone Stitched to High Roll Foam Surround
- Advanced Air Flow Cooling Design | Fs: 33.8 Hz
Last update on 2023-08-12 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Sundown X12 D2?
Do you get stressed out thinking about shopping for a great Sundown X12 D2? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Sundown X12 D2, which is why we have assembled a comprehensive list of the greatest Sundown X12 D2 available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Sundown X12 D2 that you consider buying. Your questions might include the following:
- Is it worth buying an Sundown X12 D2?
- What benefits are there with buying an Sundown X12 D2?
- What factors deserve consideration when shopping for an effective Sundown X12 D2?
- Why is it crucial to invest in any Sundown X12 D2, much less the best one?
- Which Sundown X12 D2 are good in the current market?
- Where can you find information like this about Sundown X12 D2?
We’re convinced that you likely have far more questions than just these regarding Sundown X12 D2, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Sundown X12 D2, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Sundown X12 D2. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Sundown X12 D2 buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Sundown X12 D2 currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Sundown X12 D2 has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Sundown X12 D2?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Sundown X12 D2.
- Customer Ratings: Number ratings grade Sundown X12 D2 objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Sundown X12 D2.
- Product Quality: You don’t always get what you pay for with an Sundown X12 D2, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Sundown X12 D2 is should be an indication of how long it will work out for you.
We always remember that maintaining Sundown X12 D2 information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Sundown X12 D2 is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
FAQ:
Q: How big is the Sundown audio X12 subwoofer?
A: Sundown Audio X 12 aka Sundown x12 VERSION 2 series subwoofer is rated at 1500w RMS, this is conservatively rated by sundown. This model of 12-inch X subwoofer produces insane bass and extremely.
Q: What kind of alternator do I need for Sundown X12 V2?
A: I’m running four Sundown X12 V.2’s on a Powerbass XTA 6000d. The gain on the amp is less than half way up. A high output alternator is needed powerbastards or mechman, Zero gauge wires, and an extra battery or two.
Q: What’s the process of making sundown audio products?
A: From the beginning to the end, nothing gets over looked by Sundown Audio’s engineers. The process starts with an idea, then a sketch, a functioning 3D model, then finally the prototype. You can see every detail that goes in to making their products a work of art.
Q: What kind of steel does sundown motor use?
A: Sundown uses high grade steel for the T-yolk and top plate which helps optimize their magnet slugs and get maximum cooling. They mate these new platforms to a triple stacked 220mm (8.66″) diameter motor structure featuring a hyper-extended pole and extreme clearances (allowing up to 4″ travel before reaching mechanical bottom).