Contents
The Best Tapping Machine of 2023 – Reviewed and Top Rated
After hours researching and comparing all models on the market, we find out the Best Tapping Machine of 2023. Check our ranking below.
2,169 Reviews Scanned
Rank No. #1
Grizzly Industrial G8748 - Hand Tapping Machine
- Approx. Shipping weight: 45 lbs.
- Height capacity: 7-7/8"
- Overall dimensions: 22-1/2" x 12-1/2" x 14"
- Table size: 6-1/2" x 12-1/2"
- Throat capacity: 7-3/8"
Rank No. #2
Champion Cutting Tool Brute Platinum XLT Tapper: Power Tapper, Tapping Tool
- High performance: tap 10x faster than hand tapping, less tap breakage increases productivity, powerful 450 watt motor
- High tech: automatic reversing action and consistent speed control (280/680 RPM) (for precise threading and less tap breakage)
- Easy to use & safe: pivoting tap collet for trouble-free tap alignment, built-in safety clutch, lightweight (6lbs)
- High capacity: fits standard square shank taps. Can tap steel/ferrous materials from #10 up to 9/16" (14mm) and aluminum/non-ferrous materials from #10 up to 5/8" (16mm)
- Maximize XLT Tapper Performance: use Brute Platinum XL22 Spiral Point Taps and BruteLube Fluid for increased productivity
Rank No. #3
US Stock M3-M16 Electric Tapping Machine Tapper Tapping Arm Universal 360 Degree 9PCS ANSI Collets Included
- INTRODUCTION-WTTTOOLS electric tapping machine can highly improve the productivity of making parts with a lot tapped holes. For M3-M16 tapping. Supply Voltage: 110V. Rated Power: 600W. Rotated Speed: 0-375r/min. Working Radius: 1045mm. Working Area: horizontal 1045mm, vertical 400mm. Dimension: 27.6*26*8.7in. Weight: 70.55lbs. Standard equipped tap collet size: 9PCS GT12 ANSI Collets Tap Torque Collet -1/16"Thru 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8", 7/16", 1/2".
- HIGH EFFICIENCY-All the speeds, depths, and torque are adjustable on the screen. There are three working modes: Manual Tapping, Automatic Tapping, Deep Hole Tapping. So that you can choose the suitable modes for your demands and save your time and energy. Besides, the universal feature can achieve horizontal tapping which can highly improve the productions.
- STRONG OUTPUT-The electric tapping machine has an advanced flexible tapping system and imported servo motor which help the taps are not easily damaged when blind and deep hole tapping, and ensure the processing of high quality threaded holes and suit for various operations. Besides, the forward and backward speed can be adjusted to meed your working demands.
- APPLICABLE MATERIALS-Aluminum, copper, A3 steel, 45 steel, cast iron, pig iron, Q235, S136, mold steel, 718H, 40Cr, stainless steel and other metal materials, plastic and wood and other materials.
- CARING WARRANTY-We provide 1-year warranty for the whole machine. If you have any questions or problems, please pm us directly via Amazon and we will try our best to make each customer satisfied.
Rank No. #4
DEJUN Pneumatic Tapping Machine 360° Multi-directions Pneumatic Air Tapper Universal Flexible Arm Drilling Threading Machine M3-M12 Tap Collets
- High Configuration - strong power pneumatic motor, 400rpm/min; oil-water separator separates the oil and water from the air to ensure the normal operation; the folding arm can rotate 360°on the workbench and tap vertically, 1000mm working radius.
- Premium Quality - the pneumatic tapping machine adopts high strength, aluminum alloy, strong hardness, high efficiency, stable performance, simplified operation.
- Overload Protection - our pneumatic air tapper has the clamping cylinder with overload protection device, when the tapping torque exceeds the rated torque, the adjustable safety clutch is separated to avoid tap damage.
- Applicable Materials - can be used for copper, iron, aluminum, steel, stainless steel, plastic, wood and other materials.
- Applicable Fields - suitable for all machinery manufacturing industries, mold/plastic/printing machinery, packaging machinery factories, engineering machinery, automobile and motorcycle parts, aviation engines, rolling stock and other general machinery industries.
Rank No. #5
BestEquip Pneumatic Tapping Machine, M3-M12 Tap Collets 1200mm 360° Multi-directions Pneumatic Air Tapper Universal Flexible Arm Drilling Threading Machine
- 【HIGH QUALITY】- The support of vertical type air tapping machine is made of high-strength aluminum alloy material, which has excellent corrosion resistance. Disposable abrasive tool forming, stable operation, and strong durability.
- 【SIMPLIFIED OPERATION】- Connect the air intake, install the torsion chuck and the tapping, then press the buttons to achieve fast tapping; Work in a wide range of activities without moving heavy workpieces—easy and convenient operation.
- 【OVERLOAD PROTECTION】- This air tipping comprises ISO standard M3-M12 tap collets. Overload protection device produces high precision threads while less screw tap damages; Run under abnormal load without damaging the main motor.
- 【HIGH CONFIGURATION】- Pneumatic motor, strong power; Oil and water filter to separate oil and water to ensure motor use; The folding machine arm can rotate 360°on the work table. Fast cutting speed; High production efficiency.
- 【WIDE APPLICATION】- The machine is used for tapping steel, iron, copper, aluminum, plastic, and other materials, applicable to all machinery manufacturing industry, machine tools, tobacco machinery, general-purpose machinery industries and the like.
Rank No. #6
Electric Tapping Machine Manual Desktop Adjustable Speed Drilling Tapper M3-M6 Tap Collets 6000r/min B12 (1.5-10mm) AC 110‑240V(US PLUG)
- Copper motor--The electric tapping machine uses copper motor, which has low loss and can improve the efficiency of the motor.
- 6000r/min--The motor speed is 6000r/min, the output speed is 50‑200r/min, and the dual‑level speed regulation is suitable for a variety of work needs.
- Cooling fan inside--There is cooling fan inside the motor of the tapping machine, which runs smoothly and generates little heat.
- Adjustable--Tapping in the vertical direction, the depth can be adjusted at any time, manual operation is more convenient and quick.
- With hex wrenches--Equipped with hex wrenches, etc., easy to adjust at any time, making drilling and tapping more convenient.
Rank No. #7
Pneumatic Tapping Machine, DEJUN 360° Multi-directions Pneumatic Air Tapper Universal Flexible Arm Drilling Threading Machine M3-M12 Tap Collets with Taps
- Premium Quality - the pneumatic tapping machine, not electric but only air powered, adopts high strength, aluminum alloy, strong hardness, high efficiency, stable performance, simplified operation.
- Overload Protection - our pneumatic air tapper has the clamping cylinder with overload protection device, when the tapping torque exceeds the rated torque, the adjustable safety clutch is separated to avoid tap damage.
- High Configuration - strong power pneumatic motor, 400rpm/min; oil-water separator separates the oil and water from the air to ensure the normal operation; the folding arm can rotate 360°on the workbench and tap vertically, 1000mm working radius.
- Applicable Fields - suitable for all machinery manufacturing industries, mold/plastic/printing machinery, packaging machinery factories, engineering machinery, automobile and motorcycle parts, aviation engines, rolling stock and other general machinery industries.
- Applicable Materials - can be used for copper, iron, aluminum, steel, stainless steel, plastic, wood and other materials.
Rank No. #8
Happybuy Tapping Machine M3-M12 German DIN529 Tap Collets 1000mm Pneumatic Tapping Machine 400rpm per min Vertical Type Air Tapping Machine Perfect
- Rotation Speed: 400r/min; Working area:in radius 1000mm max and 100mm min. Notice: Only apply to German standard DIN529 tap collets
- Motor Diameter: 38mm; Tapping the scope of M3 to M12; multi-directional any angle of tapping.
- Re-positioning fast, machining speed, high accuracy thread, and increased production capacity.
- Pneumatic tapping machine is used for copper, iron, aluminum, steel, stainless steel, plastic, wood, and other materials; adapt to any work environment.
- The pneumatic tapping machine is applicable to all machinery manufacturing industry, automobile and motorcycle parts, aircraft engines, locomotives, tobacco machinery,
Rank No. #9
Accusize Industrial Tools 0-1/4'' Self-Reversing Tapping Head, Jt6 Jacobs Taper, 2600-4002
- Please do not use the self-reversing tapping heads as drill chucks.** Guaranteed depth control; within ±0.004''
- Chatter-free clutch has positive engagement which allows for a smoother, more accurate operation and more rapid reversal
- Radial Float is self-centering to compensate for hole center misalignment
- Unique Double Spring mechanism produces automatic feed and cushion drive. There are 2 springs for the feed and 2 springs for the reversal
- Pre-set torque control permits easy operation of tap brake torque control
Rank No. #10
Mini Bench Drill, DIY Mini Drill Press for Bench Drilling Machine Variable Speed Drilling Chuck Mini Table Drill Precision Tapping Machine Milling Machine
- 【PERFECT DRILLING TOOL】Motor model: 795 pure copper motor. Bench drill size: 10x13x22cm/3.94x5.12x8.66inch. Speed: 1000-4500rpm. Perfect drilling tool for workshop, carpentry, DIY enthusiasts, etc.
- 【GREAT PERFORMANCE】High strength body, good stability and easy operation. 96w high power adjustable speed power supply (7 speed adjustable).
- 【HIGH QUALITY】Pure copper core motor, not easy to heat, durable. Beautiful and exquisite appearance, easy to carry and store. Thickened solid base, reduce noise, anti-vibration and anti-skid.
- 【MAIN PARAMETERS】Synchronous wheel 1:2 speed change. Drilling stroke: 40mm. Chuck specification: B12 (1.5-10mm). Voltage: 110-240V. Plug: US plug.
- 【100% GUARANTEED QUALITY】Great customer support with a flexible return policy and a money-back guarantee! Any doubts, please feel free to contact us, we will reply within 24 hours and our goal is to use professional services to solve your issues.
Rank No. #11
MXBAOHENG M3-M12 Pneumatic Tapping Machine Air Drill Tapper for Universal Flexible Arm Portable for Using Chuck Size: M3,M4,M5,(M6),M8,M10,M12 (400rpm)
- 【Tapping Range】M3-M12, Bracket can be installed,bracket need to be prepared by yourself, suitable for pipeline mechanical tapping.
- 【Application】This pneumatic tapping machine is applicable to all machinery manufacturing industry, machine tools, tooling machinery, plastic machinery, printing machinery, packaging machinery, engineering machinery, automobile and motorcycle parts, aircraft engines and other general purpose machinery industries. Tapping for copper, iron, aluminum, steel, stainless steel, plastic and wood, and other material.
Rank No. #12
Vertex 3900-0255 Compact Hand Tapper On Magnetic Base
- Compact and portable
- Maximum stroke is 2. 36"
- Mag base is 2. 36 x 2. 36 x 2"
- Tap capacity is M3-M12
- Powerful 175 lbs. permanent magnet with on/off switch
Rank No. #13
INTBUYING Electric Tapping Machine M3-M16 Vertical Type Electric Servo Tapper Drilling Machine 600W Stepless Speed Touch-Screen with Flexible Arm 220V
- 👍【𝐆𝐫𝐞𝐚𝐭 𝐏𝐞𝐫𝐟𝐨𝐫𝐦𝐚𝐧𝐜𝐞】Electric tapping machine is used in factory workshops, woodworking, DIY work,for steel tapping, aluminum tapping, copper tapping, iron tapping, wood tapping, plastic tapping, etc.Tapping capacity:M3-M16,Chuck type:GT12,Available inch tap specifications:1/8,5/32,5/16,PT1/8,1/2,9/16,5/8,Maximum speed:156rpm/min,Maximum tapping torque:200N.m,Horizontal stretch: 1.1m（43.3"),Vertical extension:0.55m（21.5").
- 👍【𝐆𝐫𝐞𝐚𝐭 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐬】[𝙎𝙩𝙧𝙤𝙣𝙜 𝙋𝙤𝙬𝙚𝙧r]Adopts 600W high power servo motor,support long time operation, tapping can be formed at one time, [𝘿𝙪𝙧𝙖𝙗𝙡𝙚]adopts high strength body, makes great tapping precision and stability, reduce the shaking of operation time.[𝙎𝙩𝙚𝙥𝙡𝙚𝙨𝙨 𝙎𝙥𝙚𝙚𝙙]The machine has stepless speed regulation function.[Double Torque Protection] Servo torque protection and chuck torque protection.
- 👍【𝐓𝐡𝐫𝐞𝐞 𝐓𝐫𝐚𝐩𝐩𝐢𝐧𝐠 𝐌𝐨𝐝𝐞𝐬】This tapping machine has three tapping modes, manual mode is suitable for single piece processing, automatic mode is suitable for batch processing, vibration mode is suitable for deep tapping pieces processing, with great tapping effect, improve the work efficiency greatly.
- 👍【𝐈𝐧𝐭𝐞𝐠𝐫𝐚𝐭𝐞𝐝 𝐒𝐮𝐩𝐩𝐨𝐫𝐭 𝐒𝐭𝐫𝐮𝐜𝐭𝐮𝐫𝐞】The electric tapping machine adopts the integrated aluminum alloy support structure, which can reduce the volume of tapping. The upper shell is designed with the position of control panel and tapping collet.
- 👍【𝐄𝐚𝐬𝐲 𝐭𝐨 𝐔𝐬𝐞】Intelligent electric universal tapping machine, adopts advanced professional arm design.Tapping can be positioned in many ways.The machine is used by touch-screen panel with clear and intuitive interface and simple operation.
Rank No. #14
Pneumatic Tapping Gun M3-M12 300RPM Pneumatic Handheld Tapping Machine Small Tapper Thread Tapping Tool Drilling Machine (Chuck with Protection)
- 【Introduction】Pneumatic tapping machine is a kind of mechanical processing equipment that processes internal thread, screw or tooth buckle on the inner side of the hole of the parts. Such as machine shell, equipment end face, nut, flange and other parts with different specifications of through holes or blind holes.
- 【Uses】This pneumatic tapping gun can use tap threads for tapping (Taps are not included). Pneumatic tapping tool needs to be used withan air compressor (above 1.5KW), Air pressure: 6-10 KG, Speed: 300 RPM, Tapping capacity: M3-M12 (3-12mm). 【Torque overload protection chuck】The tapping chuck with protection can cut off the power output when the resistance is greater than the bearing capacity of the tapwhich can avoid too much force to break the tap, so as to avoid wasting the workpiece.
- 【Application area】The tapping machine is suitable for the processing of automobile or motorcycle body, frame, chassis, connecting rod, engine, cylinder and various mechanical parts, machine tools, hardware products, metal pipes, gears, pump bodies, valves, fasteners, etc.
- 【Applicable industries】This portable tapping machine is suitable for all machinery manufacturing industries, including Machine tools, Mold/Plastic/Printing/Packaging/Engineering machinery, Automobile and Motorcycle parts, Aviation Engines, Rolling Stock and general machinery industries.
- 【Packaging & Warranty】Our product includes 1* Air Tapping Machine, 6 * Chuck: M3, M4, M5, M6-8, M10, M12; This one product with one year warranty and during this time, if you have any other questions, please feel free to contact us.
Rank No. #15
Hot Tapping Machine 08350 DM3MECH Hot Tap Kit for NPT Complete with Hole Saws and Arbor
- Features: Eliminates the need to shut down, drain, cut, refit and refill piping systems.Fit Valve size: 3/4 - 4-Inch.
- Pressure rated 300 psi for ambient temperatures,15 psi for steam systems.(Note: Not recommended for ammonia, gas or other caustic systems)
- Function: Hot tap using the DM3MECH Mechanical Hot Tapping Machine.Hot tap steel, copper, brass or aluminum pipe for installing branch connections from 3/4” to 4” valves.
- Note:Applying too much force while cutting the coupon can result in a sudden break through of the hole saw. A sudden breakl through may result in the coupon retainer striking the back side of the main and damaging the retainer. One can prevent this by cutting a spacer of 3/4" copper tube long enough to stop the retainer from hitting the back of the main. Slip this spacerl over the exposed shaft between the gland nut and the drill chuck.
- Satisfaction service : If you are not satisfied with our products.You can request a full refund within 30 days and support a 12 month warranty.Professional and sincere service allows you to purchase without risk!
Rank No. #16
LYXC US Stock M3-M16 Tap Collets 1200mm Arm 360° Universal Tapping Machine Electric Tapper 0-375rpm With ANSI Imperial Collets
- Tapping Capacity: M3 to M16; Working Direction: Universal; Working Radius: Horizontal 1200mm and Vertical 400mm; Rotation Speed:0-375r/min.
- Triple balanced articulated arm made entirely of aluminum, which guarantees a fast and precise holes alignment.Variation of the speed of rotation according to diameter of tapping and counterclockwise maximum speed for fast tool output.
- Applicable Materials: Aluminum, Copper, A3 Steel, 45 Steel, Cast Iron, Q235, S136, Mold Steel, 718H, 40Cr, Stainless Steel,etc.
- HD Human-Machine Interface, Adjustable Forawrd and Backward Speed.
- Possibility of tapping blind and open holes thanks to the adjustable clutch. 1 Year Warranty and Free Shipping
Rank No. #17
LYXC Auto-blow Oiling M3-M16 Tap Collets 1200mm Arm 360° Universal Tapping Machine Electric Tapper 0-375rpm With ANSI Imperial Collets
- Upgrade Auto-blow Oiling Function; Tapping Capacity: M3 to M16; Working Direction: Universal; Working Radius: Horizontal 1200mm and Vertical 400mm; Rotation Speed:0-375r/min;
- Triple balanced articulated arm made entirely of aluminum, which guarantees a fast and precise holes alignment.Variation of the speed of rotation according to diameter of tapping and counterclockwise maximum speed for fast tool output.
- Applicable Materials: Aluminum, Copper, A3 Steel, 45 Steel, Cast Iron, Q235, S136, Mold Steel, 718H, 40Cr, Stainless Steel,etc.
- HD Human-Machine Interface, Adjustable Forawrd and Backward Speed.
- Possibility of tapping blind and open holes thanks to the adjustable clutch.
SaleRank No. #18
XARONF Pneumatic Tapping Machine Arm M3-M12 Tap Collets Pneumatic Air Tapper Machine 400rpm/min Universal 360 Angle Flexible Arm Nut-Tapping Machine
- ❤【Main Parameter】Tapping capacity:M3-M12; Working area:Horizontal:1000mm, Vertical:500mm; No load rotation speed:400rpm;Working angle:360°universal
- ❤High Configuration - strong power pneumatic motor, 400rpm/min; oil-water separator separates the oil and water from the air to ensure the normal operation; the folding arm can rotate 360°on the workbench and tap vertically, 1000mm working radius.
- ❤【Overload Protection】our pneumatic air tapper has the clamping cylinder with overload protection device, when the tapping torque exceeds the rated torque, the adjustable safety clutch is separated to avoid tap damage.
- ❤【Collet Storage】The rack is designed with 7 collet storage holes, easy to store the collet and at any time to use change. Save worry, effort and support customized collet according to tap size.
- ❤【Wide Application】Equipped with the tap torque collet, when the tapping resistance is too large, the collet can slip to prevent the tap from breaking.Wide range of processing materials, can process aluminum, copper, A3 steel, 45 steel, cast iron, pig iron, Q235, S136, mold steel, 718H,40Cr, stainless steel and other materials.
Rank No. #19
Reed Tool DM3MECH Mechanical Hot Tapping Machine Complete with Hole Saws or Arbor
- Hot tap up to 4" valves on copper, steel or plastic pipe
- Pressure rated 300 psi for ambient temperatures
- Pressure rated 125 psi for steam systems
- Valve size: 3/4 - 4-Inch
- A great deal on a versatile tapping machine that is priced well for the market
Rank No. #20
M3-M16 Universal Electric Tapping Machine Arm with 375rpm 1200mm Flexible Arm included 9pcs ANSI Standard Collets
- Tapping angle: Universal.Rotation Speed: 0-375r/min(Stepless Speed Regulation) Tapping Capacity Steel: M3-M16 Aluminum: M3-M16 Stainless steel: M3-M16 Working Area Horizontal: 1100mm(43.3inch) Weight: 32KG (70.5lb.)Vertical: 400mm adjustable
- Applicable material: alumimum, copper, steel, cast iron, Q235, S136, mold steel, 718H, 40Cr, stainless steel and other metal materials.
- Standard Accessories Touch Panel Intelligent control system High-Precision Tapping Arm (One Set) 360° Universal Workhead Servo Motor And Reducer ( One Set). Universal Joint(Tapping For a Vertical/Horizontal ) Tap Holder M3-M16 (One Set) 9pcs ANSI Standard Collets1/4", 5/16", 5/32", 1/16", 3/16", 7/32", 3/8", 7/16", 1/2".
- Advantages:HD human-machine interface,adjustable speed.Imported servo motor with strong output force.Enhanced reducer with durable gears.Intelligent control system stable and reliable program.Safety torque collet,overload protection device.Deep-hole Tapping Hierarchically.Flexible cutting state,Save Cost.
Last update on 2023-11-27 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Tapping Machine?
Do you get stressed out thinking about shopping for a great Tapping Machine? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Tapping Machine, which is why we have assembled a comprehensive list of the greatest Tapping Machine available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Tapping Machine that you consider buying. Your questions might include the following:
- Is it worth buying an Tapping Machine?
- What benefits are there with buying an Tapping Machine?
- What factors deserve consideration when shopping for an effective Tapping Machine?
- Why is it crucial to invest in any Tapping Machine, much less the best one?
- Which Tapping Machine are good in the current market?
- Where can you find information like this about Tapping Machine?
We’re convinced that you likely have far more questions than just these regarding Tapping Machine, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Tapping Machine, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Tapping Machine. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Tapping Machine buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Tapping Machine currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Tapping Machine has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Tapping Machine?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Tapping Machine.
- Customer Ratings: Number ratings grade Tapping Machine objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Tapping Machine.
- Product Quality: You don’t always get what you pay for with an Tapping Machine, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Tapping Machine is should be an indication of how long it will work out for you.
We always remember that maintaining Tapping Machine information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Tapping Machine is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
FAQ:
Q: What is a hot tap machine?
A: HOT TAPPING MACHINES. Hot tapping is a high pressure intervention and the Mirage range of hot tapping machines can help towards a safe and effective solution. Industry-leading innovations used in our machines include a helical gear drive located as close to the cutting head as possible that ensures maximum efficiency, rotary pressure seals, and four fixed feeds.
Q: What is a drill tap machine?
A: In a modern machine shop , a tap drill is a hardened drill bit used to cut holes in metal. The most important consideration in selecting a tap drill is that it’s the proper size for the tap that will be used to cut the threads.
Q: What is a wet tap machine?
A: Wet Tap, Hot Tap or Dry Tap Machines as they are called are our specialty. From small portable hot tapping or drilling machines to professional models from 3/4″ to 6.00″, PipeMan Products is your specialist for all things Wet, Hot or Dry when it comes to tapping pipe.
Q: What is machine tap?
A: Machine Taps are High Speed Steel Hand Taps with straight flutes are designed for general purpose hand tapping or in production machines where ground thread accuracy and performance are required. They are suitable for tapping most materials in through or blind holes.