20 Best Temco Dimple Die Set of 2023 – Romance University
After hours researching and comparing all models on the market, Romance University finds out the Best Temco Dimple Die Set of 2023. Check our ranking below.
2,829 Reviews Scanned
Rank No. #1
TEMCo TH0370 Dimple Die Set Tool Kit 8pcs: 1/2" 3/4" 1" 1-1/4" 1-1/2" 1-3/4" 2" 2-1/2"
- Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13.
- Eight Dimple Dies: 1/2", 3/4", 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/2". (Actual Hole Size)
- This dimple die set creates flared holes most commonly used on automobile parts fabrication. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes.
- Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish.
- This dimple die set works with a hydraulic driver and cylinder tool most commonly used with hydraulic knockout sets like our TEMCo THA043 and TH0372.
Rank No. #2
TEMCo TH0365 Dimple Die for 1-1/2” Actual Hole Size
- Dimple Die for 1-1/2” Actual Hole Size
- Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13.
- This dimple die set creates flared holes. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes.
- Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish.
- Recommended Compression Tool: TEMCo Industrial TH0037 Knockout Punch Set or any other electricians knockout punch set.
SaleRank No. #3
Quick Turn/Quarter Turn Dzus Fastener Dimple Die Tool
- Heavy Duty 4130 Chromolly Construction
- Black Oxide Coating
- Grade 8 Head Head Flange Bolt and Nut.
- No need for washers with the custom flange hardware with our kits.
- Made In The USA-Patent Pending design
Rank No. #4
TEMCo TH0372 Punch & Die Set, Non-Conduit 5/8 3/4 7/8 1 1.125 1.25 1.375 1.50 1.625 1.75 1.875 2.00
- 5 Year Guarantee! Rated For: 3/16" Mild Steel. Recommended Driver Tonnage: 9.
- Punch & Die Sizes: 0.625", 0.75", 0.875", 1.00", 1.125", 1.25", 1.375", 1.50", 1.625", 1.75", 1.875", 2.00". Note: These dies produce the measured hole sizes, not conduit pipe sizes.
- Punching Thickness Capacity: 1/8" (11 ga) Steel, 1/16" Stainless Steel
- Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish.
- Recommended Driver Tool: TEMCo Industrial TH0004 Hydraulic Knockout Punch Set.
Rank No. #5
AMZCNC 8 Ton 1/2" to 2" Hydraulic Knockout Punch Driver Tool Kit Electrical Conduit Hole Cutter Set KO Tool Kit with 6 Dies Hole Complete Tool (Knockout Punches) (8T（1/2"~2"）)
- Labor-Saving & Hydraulic 10T: It is a knockout punch set with a separable hydraulic pump. The maximum crimping power is 10 T. It features a good tightness and no oil leakage.
- Durable Dies & Punches Set:Actual hole diameter is 0.89" for ½" conduit. Actual hole diameter is 1.11" for ¾" conduit. Actual hole diameter is 1.36" for 1" conduit. Actual hole diameter is 1.7" for 1¼" conduit. Actual hole diameter is 1.95" for 1½" conduit. Actual hole diameter is 2.42" for 2" conduit fully meeting your needs. Two draw bolts are solid and built to last. Max thickness for steel: 1/8"; Max thickness for stainless steel: 1/16".
- Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency.
- Portable Carrying Case: The stud punch tool is stored in a durable plastic toolbox that is not easily broken, saving space. It is compact, light-weight, and easy to carry. Besides, it also reduces the possibility of missing parts.
- Wide Application: This manual metal stud punch tool.Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only), Fiberglass, Plastic
Rank No. #6
LOSTAR 3 Piece Dimple Die Set Metal Fabrication Tools 1/2" / 3/4" / 1"
- ✅Heavy Duty SAE 8620 steel, Rockwell hardness of 80
- ✅Kits consists of the following dies: 1/2"(.500) 3/4" (.750) 1" (1.00)
- ✅Enhance Performance. Easy Installation. High Reliability.
- ✅Brand new with good performance
- ✅1 Year Unlimited-mileage Quality Guarantee
Rank No. #7
Yescom 10 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool w/ 6 Dies
- [Complete Punch Tools]: Hydraulic punch tool kit features 1pc 10-ton pump, 2pcs draw studs, 1pc piston shaft, 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, can drill different sizes holes on stainless steel, iron, steel, aluminum, plastic, etc; 1/8” (11 gauge) max punching thickness for iron and 1/16” (16 gauge) for stainless steel, perfect to be used for different drilling projects
- [Efficient Hydraulic Design]: Hydraulic mechanism pump produces 10T strong pressure for providing high punching accuracy and fast punching speed on punching uniform holes, more labor-saving and faster than common wrenches, ideal for improving working efficiency; pump with pressure hose for adjusting the angle of the ram flexibly to meet your punching needs, perfect for using in narrow places
- [Sturdy Steel Construction]: 40Cr steel dies and steel pump body for ensuring high strength, sturdiness and durability, stable construction is suitable for heavy-duty and frequent punching works
- [Convenient Operation]: Rotatable "on/off" knob on the pump for quick releasing pressure after drilling holes and safety valve for releasing pressure automatically when the pressure reaches the max value, perfect for adding more safety; anti-skid plastic grip at the end of the handle for easy and comfortable pressing
- [Portable & Wide Application]: Sturdy metal case with handle and double metal locks for convenient and safe storage, keeping all accessories in place and providing portability; widely used on installing and repairing wire pipeline, signal lamp and instrument on construction sites, metallurgy, petrol, electronics, electrical appliance, chemical industry, ship and machinery, etc.
Rank No. #8
Eastwood 5 Pieces Sheet Metal Dimple Die Kit Set Hole Flares To Create Flares With Machine
- 5 Pieces 5 Sizes For Create Flares In Sheet Metal Up To 1/8 in. Thick Using The Eastwood Dimple Dies.
- Includes Both Male And Female Dies
- Form Clean 45 Degrees Flares In Up To 1/8 in. Thick Steel
- Made With High-Strength Chrome Moly Steel ; Machined To Close Tolerances
- 1/2 in. Die - Requires 1/2 in. Hole - Flare Width 0.7 in. ; 1 in. Die - Requires 1 in. Hole - Flare Width 1.4 in. ; 1.5 in. Die - Requires 1-1/2 in. Hole - Flare Width 2.15 in. ; 2 in. Die - Requires 2 in. Hole - Flare Width 2.85 in. ; 2.5 in. Die - Requi
SaleRank No. #9
LOUDERLUN Hole Punch & Flare Tool Dimple Plate Dies in Black (Sizes (inches): 1/2)
- Finish Hole (inches): +1/8 (approximate)
- Flare Height (inches): 1/4 (approximate)
- Construction: steel
- Punch and flare a hole in up to 1.5MM/16 gauge steel
- Use with draw-bolt or in Bench Press
Rank No. #10
10 Piece Dimple Die Set 1/2" 3/4" 1" 1 1/4" 1 1/2" 1 3/4" 2" 2 1/2" 3" Includes Dzus Dimple Die
- Heavy Duty SAE 8620 steel with a Rockwell hardness of 80.
- Great selection of popular sizes. Must have in your toolbox!
- Holes must be drilled before you dimple the materials.(These do not act as punches)
- 10 Piece set provides the best variety of dimple options for many applications.
- 45 degree flare angle. Great for lighting panels and adding structural integrity.
Rank No. #11
Sheet Metal Flared Hole Dimple Dies, 2 Inch
- Sheet metal flared hole dimple dies
- Dies come with a black oxide coating
- Available in a variety of sizes
- All sizes feature a 1/4" radius
- Maximum material thickness application is 16 gauge (0.060")
Rank No. #12
3 Piece Dimple Die Set 1/2" / 3/4" / 1" Metal Fabrication Tools
- Kits consists: 1/2"(.500), 3/4" (.750), 1" (1.00)
- Made for use with a hydraulic press or arbor press. No holes in the middle of these dies. Providing rigidity to sheetmetal projects.
- We recommend no thicker than 3/16" material. Recommend lubricants when using the dies & Reduce die wear and gulling.
- Dies Size: 1/2" / 3/4" / 1"; Type: Dimple Die
- 1 Year Unlimited-mileage Quality Guarantee
Rank No. #13
TEMCo TH0360 Industrial 2-1/2", 3", 3-1/2", 4" Conduit Punch and Die Set for Knockout
- 13 US ton driver required. TEMCo THA043 or TH0037 set will both work. Compatible with TEMCo Industrial, Greenlee, and many other drivers.
- Made of tough hardened tool steel.
- Comes with Metric to English conversion draw stud.
- Max punching thickness of 1/8" (11 ga) Steel, 1/16" Stainless Steel.
- 5 Year Guarantee or 1 Year no questions asked return policy - we pay for shipping both ways.
Rank No. #14
Globauto 1" Hole Punch & Flare Tool Dimple Plate Dies in Black
- Finish Hole (inches): +1/8 (approximate)
- Flare Height (inches): 1/4 (approximate)
- Hole Punch Construction: steel
- Punch and flare a hole in up to 1.5MM/16 gauge steel
- Dimple Die Use with draw-bolt or in Bench Press
Rank No. #15
3 Piece Dimple Die Set 1/2" 3/4'" 1"
- Great selection of popular sizes
- Local United States Shipper
- International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions
Rank No. #16
Hanson Rivet DIMPLE Dies are Designed to Form a 100° Countersink for 3/32" Dia Rivets in pre-Punched Holes in Sheet Metal. (1 Set of 2 Dies)
- REPLACES COUNTSUNK DRILL BITS
- EXTREMELY FAST & EASY TO USE
- RECOMMENDED USAGE TOOL HS-30E
- 3/16" SHAFT DIAMETER
SaleRank No. #17
UTVDISTRIBUTION Dimple Die Set 3 Piece 1/2" 3/4" 1" Bolt Together or Hydraulic Press USA Made
- Made In The USA
- Heavy Duty Case SAE 8620 Hardened Tool Steel Dimple Die Tools built to last.
- Dies can be bolted together to dimple or placed in a hydraulic press.
- Kit contains 1/2"-3/4" 1" Dimple dies
- The original designer for metal fabrication specialists. Quality you can count on.
Rank No. #18
TEMCo TH0037 4" Hydraulic Knockout Punch Electrical Conduit Hole Cutter Set KO Tool Kit 5 Year Warranty
- True 13 US ton hydraulic knockout punch with 10 dies. All dies have laser engraved alignment marks for easy and precise positioning. Compatible with GREENLEE and other domestic punch tooling - 3/4-16 & 3/8-23
- 10 dies for conduit fitting sizes: ½", ¾", 1", 1¼", 1 ½", 2", 2 ½",3", 3 ½", 4" - Complete kit comes in a rugged storage case with a 5 Year Warranty
- Slug splitting designed dies for easy slug removal that leaves a round hole with clean edges and a uniform size is provided on punch sizes ½", ¾", 1", 1¼", 1 ½" & 2"
- Deep Draw dies that are designed with an optimized angle on the cutter face that requires less force to make the cut, reducing operator and tool fatigue is provided on punch sizes 2 ½",3", 3 ½" & 4"
- Punching Thickness Capacity: 1/8 inch (11 ga) Steel, 1/16 inch Stainless Steel Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only), Fiberglass and Plastic
Rank No. #19
Dimple Die Set 3 Piece Metal Fabrication Tools 1/2" / 3/4" / 1"
- Kits consists: 1/2"(.500) , 3/4" (.750) , 1" (1.00) . the same as the picture.
- Dies are CNC machined from premium SAE 8620 steel with a Rockwell hardness of 80.
- Made for use with a hydraulic press or arbor press. There are no holes in the middle of these dies.
- Fits for Polaris RZR XP1000, Yamaha YXZ, Jeep, UTV, Sandcar, Truck, Hot rods, Can Am Maverick X3, Race cars.
- 100% Brand new with good performance. 1 Year Unlimited-mileage Quality Guarantee.
SaleRank No. #20
Dimple Die Set 3 Pieces : 1-1/2" 1-3/4"- 2"
- Heavy Duty SAE 8620 steel with a Rockwell hardness of 80.
- Great selection of our mid size dimple dies. Includes 1-1/2"-1-3/4"-2" dies.
- Designed for use in production environments for long term use.
- Professinal grade dimple die tools and products since 2006
- Simply drill or punch the hole and dimple away.
Last update on 2023-08-10 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Temco Dimple Die Set?
Do you get stressed out thinking about shopping for a great Temco Dimple Die Set? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Temco Dimple Die Set, which is why we have assembled a comprehensive list of the greatest Temco Dimple Die Set available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Temco Dimple Die Set that you consider buying. Your questions might include the following:
- Is it worth buying an Temco Dimple Die Set?
- What benefits are there with buying an Temco Dimple Die Set?
- What factors deserve consideration when shopping for an effective Temco Dimple Die Set?
- Why is it crucial to invest in any Temco Dimple Die Set, much less the best one?
- Which Temco Dimple Die Set are good in the current market?
- Where can you find information like this about Temco Dimple Die Set?
We’re convinced that you likely have far more questions than just these regarding Temco Dimple Die Set, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Temco Dimple Die Set, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Temco Dimple Die Set. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides an Temco Dimple Die Set buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Temco Dimple Die Set currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Temco Dimple Die Set has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Temco Dimple Die Set?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Temco Dimple Die Set.
- Customer Ratings: Number ratings grade Temco Dimple Die Set objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Temco Dimple Die Set.
- Product Quality: You don’t always get what you pay for with an Temco Dimple Die Set, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Temco Dimple Die Set is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining Temco Dimple Die Set information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Temco Dimple Die Set is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.