Skip to content

The Best 800W Spindle of 2022 – Reviews & Buying Guide

After hours researching and comparing all models on the market, we find out the Best 800W Spindle of 2022. Check our ranking below.

2,397 Reviews Scanned

SaleRank No. #1
RATTMMOTOR 800W Spindle Motor Kit, 0.8KW 110V ER11 20000RPM 0.79NM Air Cooled DC Spindle Motor+Mach3 Fuction Motor Speed Controller Power Supply Converter AC110V/220V+52mm Mount Clamp for CNC Machine
  • 【Supports Reverse Rotation】As for the positive and negative wiring of the motor and the power supply, you can connect it at will. Because the motor supports reverse rotation, if you need the motor to rotate forward, just replace the interface.
  • 【Air Cooled Spindle】Power: 800W; Voltage: 110V; Idling Speed: 5000-20000r/min; Torque:0.79NM; Diameter: 52mm.
  • 【Speed Controller】 Power :800W; Input Voltage: AC100-AC220V±10% Global voltage 50/60Hz; Current Limit: 6A; Wiring: Terminal type (Convenient and fast); Support Mach3 Fuction.
  • 【Advantages】This power regulator can adjust 110 or 220v according to customers' needs. Adopt pulse width technology to make the speed more stable, and the speed is high under low speed.
  • 【Features】With overcurrent protection cut-off device to make performance more reliable; With a soft start device to eliminate motor starting current is too large.
SaleRank No. #2
RATTMMOTOR 800W Water Cooled Spindle Kit, 65mm Spindle Motor 0.8KW 110V 400HZ+1.5KW VFD 110V Single to 3 Phase Inverter Variable Frequency Drive+65mm Spindle Mount+ER11 Collet+80W Water Pump for CNC
  • 【Package Include】: ①1 x 0.8KW Water Cooled Spindle Motor ER11 ②1 x 1.5KW VFD 110V③1 x 65mm Spindle Motor Mount ④1 x 80W Water Pump ⑤1 x 5m Pipe ⑥14 x ER11 Collet(1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 3.175mm)
  • 【0.8KW Spindle Motor】: ①This is a 110V-0.8KW water-cooled 4A Φ 65x158mm spindle motor come with a ER11 nut and collet, and equipped with a 65mm spindle mount. Frequency is 400HZ, 0.003--0.005 accuracy and runout off is Less than 0.01mm. ②Speed of The Spindle Motor : 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lower than 9000 rpm during the use of the spindle. It should be noted that the main shaft cannot only rotate clockwise or counter clockwise.
  • 【VFD Inverter Parameters】The 1.5KW variable frequency drive inverter has five-digits display and status indicator lamp display frequency, current, revolution, voltage, counter, temperature, foward or reverse running, fault, ect. Input Voltage: 110V(+/-15%) ,Output Voltage 110V, Input Frequency: 50-60 Hz, Output Frequency: 0-1000 Hz, Input Phase: 1 phase, Output Phase: 3 phase.
  • 【How to Connect Spindle Motor and VFD Inverter】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected separately with inverter's port U, V, W. Number 4 is the ground wire, no wiring is required.
  • 【80W 110V Water Pump】Power: 80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 110V/50HZ. Also suitable for 0.8KW, 1.5KW, 2.2KW, 3KW and other high speed CNC water cooled spindle motor. Please remind that the submersible pump should be completely immersed in water when it is working to ensure that the submersible pump has a certain degree of cooling.
Rank No. #3
800W Spindle Motor Kit, RATTMMOTOR 0.8KW 110V CNC Air Cooled Spindle Motor 52mm ER16 20000RPM+Mach3 Speed Controller Governor with Power Supply AC110V-220V+Spindle Mount Clamp for CNC Router Machine
  • 【Supports Reverse Rotation】As for the positive and negative wiring of the motor and the power supply, you can connect it at will. Because the motor supports reverse rotation, if you need the motor to rotate forward, just replace the interface.
  • 【Air Cooled Spindle】Power: 800W; Voltage: 110V; Idling Speed: 5000-20000r/min; Torque:0.79NM; Diameter: 52mm.
  • 【Speed Controller】 Power :800W; Input Voltage: AC100-AC220V±10% Global voltage 50/60Hz; Current Limit: 6A; Wiring: Terminal type (Convenient and fast); Support Mach3 Fuction.
  • 【Advantages】This power regulator can adjust 110 or 220v according to customers' needs. Adopt pulse width technology to make the speed more stable, and the speed is high under low speed.
  • 【Features】With overcurrent protection cut-off device to make performance more reliable; With a soft start device to eliminate motor starting current is too large.
Rank No. #4
CNC Spindle Motor Kits, 110V 800W 0.8KW Air Cooled Spindle CNC Spindle +110V 0.75KW VFD+Φ65mm Clamp Mount +Collet Set ER11+ Drill bits+ Wires+ Wrenches for CNC Router Machine
  • 【PACKAGE LIST】-1x110V 0.8KW air Cooled Spindle Motor +1x110V 0.75KW VFD+ 1x Φ65mm CNC Clamp Mount +13x ER11 Collets(1mm-7mm) +10x CNC Router Bits+ 1x aviation wire(We offer 2 meters 18AWG wire in this kit, if you need longer wire, pls buy it in our store)+1xpower wire+2x wrenches
  • 【EASY AND FAST TO ASSEMBLE 】-The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.We offer fully complete accessories including pre-soldered aviation wire and power wire, It will take just 5 minutes to install all and make all functions running.
  • 【SPINDLE ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process; Runout off less than 0.005mm that 10 times precision beyond normal spindle motor.
  • 【WIDE APPLICATION】-Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass, acrylics, PVC, PCB, wood,plywood, nylon.
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience , pls contact us for any question or problem.
SaleRank No. #5
RATTMMOTOR CNC Spindle Milling Motor, 0.8KW 800W Air Cooled Spindle Motor 220V 65mm CNC Spindle CNC Motor ER11 400HZ 24000RMP for CNC Router Engraver Milling Machine
  • 【Basic Parameters】- Diameter: 65 mm x Length: 188 mm, Power: 2.2KW, Voltage: 220VAC, Current: 4A, Frequency: 0-400Hz, Collet Size: ER20, Runout off: Less than 0.01mm, Precision Tapered Bore: Less than 0.005mm, Speed: 0-24000rpm (Please keep the speed of spindle rotation above 9000 rpm.)
  • 【Cooling Method】- Good heat dissipation effect by adopting fan cooling method, without connecting to water pump and water pipe, it's more convenient and trouble-saving and can be used directly by connecting with the inverter.
  • 【Rotation Accuracy】- The rotor has high precision because of precision steel ball retainer, and high temperature resistant grease lubrication method, all of which ensures the rotation accuracy and low noise of the spindle during high-speed grinding.
  • 【Material & Configure】- The spindle has fine workmanship, strong bearings, stainless steel body and dustproof design make the spindle more durable.
  • 【Main Application 】This spindle motor is mainly designed for CNC router machine and usually used with VFD Inverter, engraving materials such as wood, aluminum, glass, PVC industry ,ect.
Rank No. #6
110V 800w vfd Spindle Package:110V 1.5KW VFD+110V 800w Φ65mm ER11 Water Cooled Spindle Motor+110V Water Pump+65mm Clamp +5m Water Pipe
  • 【Connection way】The package only supports 110VAC(+/-10%) single phase voltage input, the input wire is connected to the R and S terminals of the VFD, and the output wire is connected to the UVW terminal of the motor(pin1=U,pin2=V,pin3=W,pin4=ground)
  • 【Parameter Settings】All parameters have been set up, the customer can directly connect and start when receiving the product
  • 【Package Include】1 x 110V-2.2KW VFD, 1 x 2.2KW Φ80mm 24000RPM ER20 Spindle .1 x 110V-75W Water Pump ,1 x 80mm motor clamp,1 x 5m Water Pipe.
  • 【Wide range of applications】The spindle motor applied to: wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc.
  • 【Warranty】1 Year discount replace (The spindle is half a year). If there is an error code in the product and you do not know how to operate, please contact the seller
Rank No. #7
Futchoy CNC 3018plus Metal CNC Z Axis Spindle Diameter For 200W 300W 500W 800W Spind
  • ★Stepping motor: Nema17 42HS48mm stepping motor (not included)
  • ★Screw: T8 lock nut, lead 4MM
  • ★Sliding stroke: 60mm
  • ★Spindle hole diameter: 52mm
  • ★Product Size: 15.5x7x13.2cm/6.1"x2.76"x5.2"
Rank No. #8
65mm Diameter Aluminum CNC Spindle Holder Mount for AnoleX CNC Router Machine 3020-Evo/ 3030-Evo Pro/4030-Evo Ultra
  • EASY UPGRADE: Specially designed for AnoleX CNC Router 3020-Evo. Boost your 3020-Evo with a more powerful router and this 65mm spindle mount
  • Premium Material: The spindle bracket is made of precision machined aluminum for better rigidity and durability. High strength and long service life.
  • Ingenious Design: keep the high stability of the main shaft, and the size is suitable. A sturdy mounting screw pattern ensures your spindle stays level at all times.
  • Easy to install: install the adapter plate, and then install the spindle mount, only need to unscrew a few screws
  • Efficiency Improvement: install the spindle mount, matching with trimming machine or 800w spindle can increase the engraving efficiency several times
Rank No. #9
CNC Spindle Kits: 110V 1.5KW VFD+110V 800W 400hz Spindle Motor+110V 75W Water Pump+7pcs ER11 Collet+5m Water Pipe+65mm Motor Clamp Mount
  • NOTE:spindle need to be equipped with this vfd to use.Rated frequency of spindle is 400 Hz,If you input 220v/110v voltage at 50hz or 60hz, it will damage the spindle and vfd DOES NOT support external resistor.Fan runs all the time even though the motor isn't (fan functions need to be customized).
  • This VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter.This item use Sine wave PWN(SPWM) for the control system.work well with the Mach 3 controller
  • 7 PCS ER20 Collet Set : 1mm,2mm,3.75mm,4mm,5mm,6.35mm,7mm
  • The spindle motor applied to: wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc.
  • If there are problems in use after you receive,please don't give us negative or natural feedback,and your return will be a great loss to us.Due to the VFD is a flexibly configurable device, please be sure to contact us and we will give you a satisfactory solution.
Rank No. #10
CNC Spindle, MYSWEETY 500W Air Cooled 0.5kw Milling Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for DIY Engraving
  • 🛠️【CNC Spindle kit 500W】- 1 x 500W Air-Cooled Spindle Motor, 1 x AC110V/220V Speed Governor with MACH3, 1 x 52mm Mount bracket, 13 x ER11 collect, 10 x V Bit Cutter, 4 x Screws(free).
  • 🛠️【500W CNC Spindle motor】- Operating voltage: 100VDC, Power: 500W, Input: AC110V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM. Insulation resistance:> 2 megohms, Dielectric strength: 400V. Motor Length: 200MM, High precision spindle run out 0.01-0.03.
  • 🛠️【Speed Power Switch】- Input voltage: AC110V/220V, 50/60Hz. Output current peak: 6A. Output voltage: DC0-100V. Please install in the place that is draughty, no dramatic impact, no vibration, no explosion hazard medium, no conductive metal particle.
  • 🛠️【 52mm Mount Bracket】- Made of high quality cast aluminum, this spindle motor bracket clamp is strong and Sturdy. Diameter: 52mm, Chuck portion length: 45MM, Chuck portion diameter: 16mm.
  • 🛠️【ER11 Collet Chuck】- 13Pcs ER11 Collet Set Gripping Range: 1MM to 7MM(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm). Run-out tolerance 0.01mm. For CNC milling Lathe Tool & Work holding Engraving machine.

Last update on 2024-04-17 / Affiliate links / Images from Amazon Product Advertising API

How Do You Buy The Best 800W Spindle?

Do you get stressed out thinking about shopping for a great 800W Spindle? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching 800W Spindle, which is why we have assembled a comprehensive list of the greatest 800W Spindle available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for 800W Spindle that you consider buying. Your questions might include the following:

  • Is it worth buying an 800W Spindle?
  • What benefits are there with buying an 800W Spindle?
  • What factors deserve consideration when shopping for an effective 800W Spindle?
  • Why is it crucial to invest in any 800W Spindle, much less the best one?
  • Which 800W Spindle are good in the current market?
  • Where can you find information like this about 800W Spindle?

We’re convinced that you likely have far more questions than just these regarding 800W Spindle, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for 800W Spindle, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible 800W Spindle. Make sure that you are only using trustworthy and credible websites and sources.

We provide an 800W Spindle buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available 800W Spindle currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of 800W Spindle has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an 800W Spindle?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your 800W Spindle.
  5. Customer Ratings: Number ratings grade 800W Spindle objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their 800W Spindle.
  7. Product Quality: You don’t always get what you pay for with an 800W Spindle, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an 800W Spindle is should be an indication of how long it will work out for you.

We always remember that maintaining 800W Spindle information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding 800W Spindle is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Related Post: