The Best dashboard camera mounts of 2022 – Reviews & Buying Guide
After hours researching and comparing all models on the market, we find out the Best dashboard camera mounts of 2022. Check our ranking below.
2,938 Reviews Scanned
Rank No. #1
Sticky Adhesive Replacement for Windshield Camera Holder, AZXYI 6pcs 2.76''(70mm) VHB Circle Double-Sided Adhesive Tapes for Dashboard Suction Cup Mount, Mounting Disk Pads, Dash Cam/GPS/Sucker Holder
- 【Strong Sticky Adhesive】These extra strong both side clear adhesion pads' stickiness is 40% stronger than ordinary adhesive. The heat resistant performance of these circle adhesive double-sided mounting adhesive tapes for dash cam mount reaches 120°C+, you can use it without worry in hot Summer. Easy to fix on your car phone socket base, or heavy duty dashboard mount base, you can drive uber, truck, vehicle security in bumpy roads.
- 【6Pcs Clear Adhesives Replacement】We offer 6 Pcs round clear sticky adhesive pads(Diameter: 70mm, 2.75") for attaching dashboard pad mounting disk to your car dashboard . You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup.
- 【Cut into any size you need & Compatible With Suction Base】You can cut pads into smaller pieces if need. Compatible with most suction cup dashboard mount and other windshield long arm mount, GPS holder, EZ Pass/I-Pass/SunPass holder, camera mount, ETC, wireless charger base, dash camera mount holder etc on the market.
- 【Easy to Install】Provided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. When using, first easily peel off the white release film, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, then peel off the other red side film and stick to your car dashboard. Press down repeatedly to increase the contact of the adhesive with the substrate. please wait 24 HOURS to use.
- 【Very High Bond & Easy to Remove】These high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond, bonding almost instantly with no drying time. It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind.
Rank No. #2
Sticky Adhesive Replacement for Dashboard Suction Cup Mount, 80mm (3.15") VOLPORT 4pcs 3M VHB Circle Double-Sided Extra Strong Adhesive Sticker Tapes for Dash/Camera/GPS/Ipad/Car Phone Sucker Holders
- 1.[ Designed for Suction Cup Mount] Volport 3M round flat adhesive stickers fit for dashboard suction cup mount cradle,make your sucker stronger.It is also compatible with dash cam, GPS, car cell phone mount, iPad, tablet holder, soap dispenser, bathroom shower caddy / head /shelf /rod/, suction adhesive base/car clips, dashboard pad mounting disk, hook, towel rack/ring, rv, backup camera screen, hanging hooks, ect.You can also cut or trim the two sides sticky tabs to any smaller size you need.
- 2.[ Genuine 3M Heat Resistant Tile Semi Permanent Sticky Adhesive Sheeting Disc Replacement ]The high temperature resistance performance of these suction cup adhesive back for dash cam mount/stainless steel holders/decorations/security camera/shower washcloth holder/towel bar/shower walls/motion sensor light/hanger/picture/hottub/kitchen/sink/glass doors/aluminum toilet paper holders reaches 120°C+，even on hot summer days in Texas,you can also use it safely, no more worries in cold weather, too.
- 3.[ Very High Bond Stickiness ]: The adherence of these thin durable 2-sided circular waterproofing foam adhesive stickies parts pads is 40% stronger than the ordinary glue on the market. This 3M double face strength sticky part big adhesive backing dot is also waterproof. Multipurpose tearable tacky double sided gripping fixate anti gravity gel strips patches pad for roadster mobile phone carmount, furniture，tiles.
- 4.[ Easy to Use ]: This large circle 2 sides refill adhesion tape replacement kit comes with alcohol packs to clean the surfaces before applying. Just peel off the old adhesive stickly dots gel from mount and clean the the surface with alcohol pad first, when the surface is dried, tear off the 3m adhesive film to stick it to the bottom of the suction cup bracket directly and press down repeatedly for 5-10 minutes for better connecting to the surface, then wait 24 HOURS to use.
- 5.[ Package Includes ]: 4 x 3.15 inch wide (80mm diameter)3m heavy duty removable heat proof small double-stick sticky padded both side backed mat tape, 4 x alcohol pad ,1 x user guide. We provide a one-year warranty and if you need any help with our product, please feel free to contact us and we will offer you our best after-sales service. Your satisfaction is our priority.
SaleRank No. #3
Sportway S30 Dash Cam Suction Mount (2nd Gen) with 10pcs Joints for REXING,Z-Edge,Old Shark,YI,KDLINKS,Falcon Zero,Transcend,Crosstour,VANTRUE,GoPro Hero and Most Other Dash Cameras DVR GPS
- ★S30 with 10pcs different joints, suitable for most popular brand dash cam, such as REXING,Z-Edge,Old Shark,YI,KDLINKS,Falcon Zero,Transcend,Crosstour,VANTRUE,Black Box,GoPro Hero......For the corresponding brand and model, please check the picture
- ★The mount uses POM and ABS plastics ,tolerable temperature range is :-40℃～120℃;the suction cup uses PVC material, tolerable temperature range is :-20℃～70℃,and bearing weight up to 5kgs(11 lb)
- ★Easy to Install,Remove the suction cup protective film and attach to a Clean and smooth surface to get Maximum holding strength on the Windshield.
- ★360 degree rotation design,rotate ball adapter head provides flexibility for positioning the dash cam.
- ★Easier to use than 3M Double-Sided Adhesive Mount Holder Bracket, no harm to car glass
Rank No. #4
Suction Camera Mount, Aozcu Car Windshield Dashboard Camera Holder with 3M Adhesive Disk for GoPro Max, Hero 9 8 7 6 5, Session 5, DJI OSMO Action, AKASO, Campark, Canon, DSLRs and Other Cameras
- 【Widely Application】This camera suction cup holder is very fit for vehicle windscreen, it also can attaches for car windshield, window, car dashboard, car bonnet, smooth glassware, and boat windows. Perfect for various occasions, such as cars, ships, motor boats, etc, you can enjoy the POV filming.
- 【Broad Compatibility】 This suction mount suitable for most devices with a 1/4 inch screw hole, for GoPro Hero 10 9 8 7 6 5 4 3+ 3 2 1, Hero Session 5 4 3, AKASO Brave 7 LE/ Brave 7/ Brave 6 Plus/ Brave 6/ Brave 4/ V50 Pro/ V50 Elite/ V50 X/ EK7000 Pro/ EK7000, DJI OSMO ACTION, Dragon Touch, Campark, COOAU, Crosstour, Victure, DSLRs, ring light, video light, projector, webcam.
- 【Super Stable Suction Cup】 The adhesive disk prepared for uneven surface makes the camera holder fit for more occasions.(Dashboard Pad：For better experience, please stick it on the dash for more than 6 hours before use.) It has a super 93 mm vacuum suction cup, can firmly stick on the windscreen and other smooth surface. In the case of steep road, sudden braking, speed bumps, etc., it can also be stably attached to the car.
- 【360 Degree Rotation】360-Degree rotating metal joint ball can help you adjust the angle at will and shoot the best moment. The iron ball head design is more durable than plastic material. The arm of this mount can flexibly rotate 180 degree to make easy for you to get the perfect viewing angle.
- 【Easily Installation】Simple matching and friendly design make it easy to install and use. All Aozcu products with a 60-day refund and a 12-month worry-free warranty. If you have any questions during use, please contact us. (Package includes: 1x suction cup mount, 1x tripod adapter, 1x user manual.)
SaleRank No. #5
Delkin Devices Fat Gecko Mini Suction Camera Mount (DDMOUNT-MINI)
- Mounts to Any Smooth, Non-Porous Surface or Object
- Patented 3 in. Industrial Suction Cup
- Universal ¼”-20 Photography Mount
- 360° Tilt, Turn and Rotation
- Ruggedly Constructed to Endure Any Shooting Environment
Rank No. #6
OctinPris Dash Camera Suction Cup Mount Dashcam Mounts Holder with 13 Ball Joints Adapter for Vehicle Video Recorder Windshield & Dashboard for Dash Car DVR Camera GPS
- Car dashboard/windshield rotating 360 Degree mount holder for car DVR GPS Camcorder holder.
- Swivel ball adapter head provides flexibility for positioning the camera. Different joints kit to suit most Car Dash Camera, GPS, Action Camera.
- Attaching to a clean and smooth surface to get maximum holding strength.
- New 13 different joints kit suitable for most car dash cam, camcorder DVR on the market, include Rexing V1, Z Edge,Falcon F170, Old Shark, YI, Amebay, KDLINKS X1, VANTRUE, G1W G1W-H G1W-C G1W-B LS300W GT550S and other hot selling dash cam.
- PVC windshield suction performs well in hot climates. Dashboard suction cup diameter 5cm/1.97inch.
Rank No. #7
XYCING Vehicle Dashboard Windshield Suction Cup Mounting Bracket - Replacement Mount Holder for Display Monitors of Automotive Dash Cam, Car Rearview Camera Parking System, Portable Car GPS Navigator
- Windshield Mounting Bracket, replacement or backup for mounting holder of your Portable Car GPS Navigator, Vehicle Monitor, Car DVR and other devices with the mounting holes compatible with this bracket
- Suction cup hold your devices onto your windshield tightly and safely, providing a stable driving assistance environment
- Easy installation - Mount the device with 4 mounting holes, place the suction cup on to your windshield or dashboard, then adjust the 360-degrees swivel arm and suction cup switch to tighten and fix the holder
- Mainly used for display monitors of rearview camera parking systems, car dvr, portable gps navigator, etc.
- DIY is also available, make 4 mounting holes on the back of your device to fit this Windshield Mounting Bracket
SaleRank No. #8
Very High Bond Car Adhesive, AZXYI 9 PCS Dashboard Sticky Adhesive Replacement, Double Sided Sticky Pads Sticker Tapes for Mounting Windshield Dashboard Magnetic Phone Car Mount and Dash Cam
- [9Pcs Strong Very High Bond Sticky Adhesive] - AZXYI offers 9 super sticky adhesive, double side self sticky car adhesive. Rounded rectangle adhesive pads with pressure-sensitive VHB adhesive pads. The Size compatible with most magnetic dashboard mount base, Size: The length is 1.97", the width is 1.18", and the thickness is 0.03".
- 【Easy to Use】To maximize adhesive contact, please clean the adhesive surface before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck. First peel off the white side of the adhesive and stick it to the car mount base. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your dashboard.
- [Suitable for stick on many flat hard surface] - Can be used in home bathroom mirror, bed post, wall, locker, refrigerator, office, driving personnel and other related equipment replace. It is a strong sticky adhesive replacement if your magnet dashboard car holder or phone dock lost its stickness. These magnetic dashboard mount base replacement sticky adhesive compatible with Wizgear, Scosche, Bextrix, Scosche, Trainium.
- [Very High Bond & Durability] - These high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond attaching various substrates/surfaces, stable even in bumpy roads and actually builds strength over time. These Double-sided stickers roll with pressure sensitive adhesive bonds almost instantly with no drying time. It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind.
- [Tips and Tricks] - These adhesives perform flawlessly when being applied with steady pressure on a clean surface. That means no wax, dirt or porous surfaces and applying steady pressure for a period of time - not just stuck on for 3 seconds. Second, they need time to cure. They will cure about 50% in 20 minutes - but need 2 days to be 100%.
SaleRank No. #9
iSaddle CH01B 1/4" Thread Camera Mount Mini Double-Sided Adhesive in Dash Cam Mount Holder - Universal Tripod Permanent Holder Fits Sony/Ricoh/HP/GoPro/Oculus (M4 M6 Screw Join Ball Included)
- Ideal For Small Digital Cameras With 1/4 Inch 20 Mounting Pattern
- 3M Double-Sided Adhesive Mount Stands Well In Your Windshield Or DashBoard
- Swivel Ball Adapter Head Provides Flexibility For Positioning The Camera
- Attaching To a Clean And Smooth Surface To Get Maximum Holding Strength
- Easy To Get a Customized Holder With iSaddle Mounting Kit
Rank No. #10
iSaddle Dash Cam Suction Mount - Windshield & Dashboard Suction Cup Mount Holder/w Various Joints for Yi/Rexing/Falcon/Old Shark/VANTRUE/KDLINKS/WheelWitness/.(99% On-Dash Cameras Suitable)
- EASY TO INSTALL!!! - Quick Install in One Second NO Tools Requires, Should Attach To Clean And Smooth Surface To Get Maximum Holding Strength.
- EASY TO CUSTOMIZE! - Rotate to Any Angle You Need and Get Best Driver's View, Easy To Customize it With iSaddle Mounting Kit.
- SUIT FOR ALL CARS! - No Need to Worry About the Rearview Mirror, Install to Windshield or Dashboard or Anywhere With 3M Mounting Pad.
- SUIT FOR 99% CAMS! - Various Joints Fits 99% Dash Cams/Action Cams(For Yi/Rexing/Falcon/Z-Edge/Old Shark/VANTRUE/Rove/AUKEY/APEMAN/KDLINKS/ARECORD/HP/WheelWitness/Transcend/TaoTronics and so on).
- 100% MONEY BACK GUARANTEE!!! - Purchase Now, Risk-Free. Feel Free to click the "Add to Cart" Button RIGHT NOW!
Last update on 2022-10-22 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best dashboard camera mounts?
Do you get stressed out thinking about shopping for a great dashboard camera mounts? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching dashboard camera mounts, which is why we have assembled a comprehensive list of the greatest dashboard camera mounts available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for dashboard camera mounts that you consider buying. Your questions might include the following:
- Is it worth buying an dashboard camera mounts?
- What benefits are there with buying an dashboard camera mounts?
- What factors deserve consideration when shopping for an effective dashboard camera mounts?
- Why is it crucial to invest in any dashboard camera mounts, much less the best one?
- Which dashboard camera mounts are good in the current market?
- Where can you find information like this about dashboard camera mounts?
We’re convinced that you likely have far more questions than just these regarding dashboard camera mounts, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for dashboard camera mounts, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible dashboard camera mounts. Make sure that you are only using trustworthy and credible websites and sources.
We provide an dashboard camera mounts buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available dashboard camera mounts currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of dashboard camera mounts has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an dashboard camera mounts?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your dashboard camera mounts.
- Customer Ratings: Number ratings grade dashboard camera mounts objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their dashboard camera mounts.
- Product Quality: You don’t always get what you pay for with an dashboard camera mounts, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an dashboard camera mounts is should be an indication of how long it will work out for you.
We always remember that maintaining dashboard camera mounts information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding dashboard camera mounts is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
