The Best Otc 4581 Bearing Puller of 2022 – Reviews & Buying Guide
After hours researching and comparing all models on the market, we find out the Best Otc 4581 Bearing Puller of 2022. Check our ranking below.
2,482 Reviews Scanned
- The OTC blind hole bearing puller set is for those jobs requiring an internal pull
- set includes four collets sizes 7/16 inch to 1/2 inch, 9/16 inch to 11/16 inch, 5/8 inch to 1 inch, and 1 inch to 1-1/4 inch which fit a wide range of applications
- Select the appropriate sized collet by comparing it with the application. Insert the collet, expand it to fit the hole, and then attach the slide hammer
- Includes a 2-1/2 pound slide hammer with a T-handle
- Blow-molded plastic storage case keeps set contents organized and protected from loss
- OTC's internal pulling attachment removes bearing cups, oil seals, bushings, and other parts from blind holes quickly and easily
- Jaw spread is 1-1/2 inches to 9 inches; jaw reach is 4 inches
- Tapped hole in adapter has a 1"-8 thread
- Tapped hole in cross block has 5/8-18 threads
- Use with No. 1063 Hydraulic Push-Puller
- Designed to pull flywheel pilot bearings in close quarters where a slide hammer cannot be used
- Operates on many models with engine in chassis
- Capacity of 7/8 inch to 2 inches
- ID Reach of 1 inch
- High-grade materials ensure quality performance over the lifetime of the tool
- OTC's internal pulling attachment removes bearing cups, oil seals, bushings, and other parts from blind holes quickly and easily
- Jaw spread is 1-1/2 inches to 6 inches
- Jaw reach is 4 inches
- Tapped hole in cross block has 5/8-18 threads
- Use with Nos. 927 or 938 Push-Pullers, 1155 or 1156 slide hammer pullers, or 24832 or 24833 puller screws
- The Hub Grappler is a complete solution for servicing wheel hubs/bearings on the vehicle w/o removing the steering components or knuckle - eliminating unnecessary alignments or the use of a shop press
- Jaws are designed and sized to properly fit hub applications and can be quickly located on the puller bar without the need for fasteners
- 3/4 inch custom drive screw coupled with the special equalizer washer ensures smooth operation while proprietary heat treating provides 5 to 10 times longer life than similar designs
- Six adapters increase application coverage; includes tie rod/ball joint tool and two Ford axle installers
- Included Application Guide is the most comprehensive on the market
- OTC's 4520 Differential Side Carrier Bearing Puller Set is an ideal solution for removing differential side carrier bearings on a wide variety of cars and light-duty trucks
- Set includes: No. 4520-1 Forcing Screw/Cross Block Assembly, No. 4520-2 Puller Jaws/Pins (two ea.), No. 4520-3 Puller Jaws Retaining Yoke and No. 4520-4 Step Plate Adapters to fit carrier bearings
- Spread is 2-5/8 inches on inner holes in crossbar, 3-3/8 inches on outer holes in crossbar; 1-5/8 inch reach; 3/4-16 x 6-11/16 inches long forcing screw
- Step plate adapter set includes 4 sizes: 15/16 - 1-11/32 inch diameter, 1-1/8 - 1-1/2 inch diameter, 1-1/4 - 1-5/8 inch diameter, and 1-1/8 - 1-3/4 inch diameter
- High-grade materials ensure quality performance over the lifetime of the tools; included plastic storage case keeps tools contained and organized so they are ready to go when you need them
- For a wide range of pulling jobs including: bearings; alternator, generator, power steering, and crankshaft pulleys; timing gears; harmonic balancers; and more
- Drop-forged components can be used in a variety of combinations
- Set components deliver a spread of 3 inches to 5 inches and a reach of 1 inch to 2-1/4 inches
- Kit includes 2 ea. forcing screws (live center), 2 ea. cross-bar yokes, 2 ea. clamp bolts, 3 pairs of puller jaws, 1 pair of jaw pins with ball spring, and 3 pairs of capped bolts
- Durable blow-molded plastic storage case that keeps set components contained and organized so they are ready for use when needed
- Set contains slide hammer and popular attachments needed for servicing flange type floating rear axle bearing and seals in most late model rear wheel drive cars and light trucks
- Includes 3 sizes of rear axle bearing pullers
- Slide hammer tee bar and Slide hammer 5 LB head weight
- Pulling hook rear axle pulling plate and bearing cup remover
- Blow molded case
- NO SHOP PRESS NEEDED: Remove the need for a shop press with our wheel hub bearing press tool; Save time removing even seized-up wheel hub and bearing assemblies; Our bearing press kit allows mechanics to install wheel bearings without a shop press
- FOR PRO AND DIY MECHANICS: This wheel bearing puller/installer is one of the only tools for servicing front and rear wheel hubs and bearing on German cars; Install wheel hubs and bearings on most vehicles easily with our wheel bearing press kit
- TIME-SAVING BEARING TOOL: No need to remove the strut assembly or knuckle to remove/install the hub and bearing; Our hub puller tool removes/installs hubs safely from the knuckle; Wheel bearing removal kit removes the need for an alignment after use
- VARIETY OF ADAPTERS: Service your vehicles easily with our rear and front wheel bearing removal kit; This wheel bearing removal tool features all the adapters needed to service a number of foreign and domestic vehicles—BMW, Porsche, VW, and more
- DURABLE STEEL CONSTRUCTION: Our rear and front wheel drive bearing adapter kit's steel design holds up to the torque required to remove hubs and bearings; The wheel bearing tool removes hubs and bearings without damaging your vehicle's parts
- 1.16-PIECE SET: This blind bearing puller set by Orion Motor Tech includes a slide hammer, counterstay puller, spare pin bolt, 3 screw adapters, and 10 split collets to get all your work done on parts from 1/4 to 2-1/3 inch diameter (6-59 mm)
- 2.HEAVY-DUTY CONSTRUCTION: These wheel bearing removal tools are made from AISI 1045 medium carbon steel forged and galvanized for long-term durability under even punishing use; the collets in particular are chromoly steel to handle even the most stubborn blind bearings and bushings without trouble
- 3.WIDE APPLICATION: This internal bearing puller set's expandable collets and threaded screw adapters remove tight and jammed axles, bearings, and bushings on a wide variety of vehicles without damaging the removed parts
- 4.EASY TO USE: For most parts, just fit the appropriate collet, lock it into the inner race, and pull the slide hammer's weight back to easily knock out the bearing or bushing; for tighter or more delicate operation, the counterstay can be slowly tightened to more carefully extract the part
- 5.BLOW-MOLDED CASE: The custom blow-molded case keeps everything organized and easy to carry or store as needed
Last update on 2023-05-31 / Affiliate links / Images from Amazon Product Advertising API
How Do You Buy The Best Otc 4581 Bearing Puller?
Do you get stressed out thinking about shopping for a great Otc 4581 Bearing Puller? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Otc 4581 Bearing Puller, which is why we have assembled a comprehensive list of the greatest Otc 4581 Bearing Puller available in the current market. We’ve also come up with a list of questions that you probably have yourself.
We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Otc 4581 Bearing Puller that you consider buying. Your questions might include the following:
- Is it worth buying an Otc 4581 Bearing Puller?
- What benefits are there with buying an Otc 4581 Bearing Puller?
- What factors deserve consideration when shopping for an effective Otc 4581 Bearing Puller?
- Why is it crucial to invest in any Otc 4581 Bearing Puller, much less the best one?
- Which Otc 4581 Bearing Puller are good in the current market?
- Where can you find information like this about Otc 4581 Bearing Puller?
We’re convinced that you likely have far more questions than just these regarding Otc 4581 Bearing Puller, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Otc 4581 Bearing Puller, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Otc 4581 Bearing Puller. Make sure that you are only using trustworthy and credible websites and sources.
We provide an Otc 4581 Bearing Puller buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Otc 4581 Bearing Puller currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Otc 4581 Bearing Puller has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Otc 4581 Bearing Puller?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Otc 4581 Bearing Puller.
- Customer Ratings: Number ratings grade Otc 4581 Bearing Puller objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Otc 4581 Bearing Puller.
- Product Quality: You don’t always get what you pay for with an Otc 4581 Bearing Puller, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Otc 4581 Bearing Puller is should be an indication of how long it will work out for you.
We always remember that maintaining Otc 4581 Bearing Puller information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Otc 4581 Bearing Puller is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
