Contents

The Best Usb 20 Header Splitter of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Usb 20 Header Splitter of 2023. Check our ranking below.

2,276 Reviews Scanned

Rank No. #1

LINKUP - USB 2.0 Female to USB 3.0 Male 20 Pin IDC Motherboard Header Active Compatible Converter Compatible with LINKUP Type C USB-C Chipset and Panel Mount

【Upgrade from USB 2.0 to USB 3.0 or USB 3.1】Allows USB 2.0 motherboards with 9pin headers to be upgraded to USB 3.0 or 3.1.
【Noise Reduction】 Shielded to minimize Electromagnetic / Radio Frequency Interference (EMI / RFI) , Cable Length : 26 cm / 10 inches
【LINKUP Cares】 Backed by a LINKUP Limited 1-Year Warranty and Complimentary Premium Online Support

Rank No. #2

Erpmlyo 2Pcs Motherboard USB 3.0 19PIN Header 1 to 2 Extension Splitter Cable,12Cm 19Pin Internal Extension Header Cable 500167915, Black

USB 3.0 A female connector can be screwed on the panel.
You can use USB 3.0 Type A female conversion USB3.0 (20-pin connector) to directly connect to the motherboard
Dual port USB 3.0 internal thread mounting panel type to motherboard 19-pin flat cable
USB 3.0 port x 2 switch to USB 3.0 19-pin cable. There are screw mounting holes on the USB 3.0 female end.

Rank No. #3

Dual USB 3.0 Type A to 20 Pin Header Cable Super Speed 5Gbp/s Data Sygn Transmission Adapters Male Y Connectors Slot for Computer Motherboards

Dual USB 3.0 male out to 20 pin header cable connection widely used to add extra USB 3.0 ports to any PC, suitable to connect for a multi panel and install a card reader specially or other USB device
High-speed USB 3.0 adapter as speeds up to 5Gbp/s data transmission, made by environmental protection wire
USB 3.0 type-A male convert USB3.0 (20pin Header), adds USB ports directly to your motherboard without taking up a PCI slot and easy connected to the chassis front panel of USB3.0
USB 3.0 Male to Male Y cable Interface : 19 Pin Male Motherboard Head to 2 x A Type USB 3.0 Male. Length: approx.27 cm / 10.6"
Make your computer work faster with this USB 3.0 cable extension !

Rank No. #4

cablecc USB 3.1 Front Panel Header to USB 3.0 20Pin Header Extension Cable 20cm for ASUS Motherboard

The cable only support usb3.1/usb3.0 device, it can't work at USB2.0(480Mbps)
USB 3.1 require a different front panel header than USB 3.0. The USB 3.1 port interface is using the USB 3.0 pin set and more. It is design to be backwards compatible (will explain later).
There are no official release of the specs for the USB 3.1 header yet (as of this writing), But first motherboard with this is the ASUS ROG MAXIMUS IX FORMULA,STRIX Z270I/Z270G etc.
Connector1: USB 3.0 Front Panel Header Connector2: USB 3.1 Front Panel Header
Length: 20cm

Rank No. #5

Duttek USB 3.0 Motherboard Adapter 2 Pack, Internal USB 3.0 Header Splitter Adapter, USB 3.0 Female Mount Panel to Motherboard 20pin Female for PC Motherboard Mainboard

USB 3.0 Motherboard adapter Compatible with USB 3.0 Super Speed 20 pin Motherboard Header.
2 Ports USB 3.0 Header to USB 3.0 Port Adapter Color: Blue, Black; Net Weight: 18g.
Add extra USB 3.0 port to PC from 20 pin usb 3.0 header with this adapter.
USB internal splitter Adapter backwards compliant with USB 1.0 / 2.0.
USB header to USB port adapter is easy to use, driverless installation,USB 3.0 Splitter Adapter for Windows ME / 2000 / XP / Vista / 7 / 8 / 10 / Linux (any distribution).

Rank No. #6

E-outstanding 20 Pin USB 3.0 Header Female to Dual USB 3.0 Female Splitter Adapter Motherboard Extension Connector

Made of quality materials and durable.
USB connector to USB port Adapters are easy to use, require no driver installation, and can be plugged in and played.
Use this adapter to add additional USB 3.0 ports from the 20-pin USB 3.0 connector to the PC side.
Materials: plastic, metal.
Color: black. Weight: about 20g/PCS. The package includes: 1PC 20pin to USB3.0 adapter.

Rank No. #7

GELRHONR 2 Port USB 3.0 A Female to 20 Pin Header Motherboard Cable Internal Connection，19 Pin Y Splitter Cable Dual Port USB 3.0 A Female to 20 Pin Female Motherboard Header Adapter 25cm-Black

✪ Suitable for converting the two standard USB 3.0 A sockets on the back of the motherboard to the two USB 3.0A sockets connected in front of the USB 20Pin
✪ USING THIS ADAPTER, the mainboard 20PIN socket can be directly converted into 2 USB3.0 sockets.plug and play easily，It is very convenient for you to connect the USB3.0 data cable to the USB3.0 panel in front of the case.
✪ This USB 3.0 cable can be installed into a standard PC slot and will be connected internally to any USB 3.0 20 pin header socket. It expands your system by two external USB 3.0 ports and enables the connection of different USB devices.
✪ 2 PORTS USB 3.0 FEMALE to motherboard header adapter cable, superspeed USB3.0 extension code（Theoretically reach 5Gps）， USB 3.0 female port backwards compatible with USB 2.0、1.0
✪ NOTE: The Y type cable has 19 pins but the connector has 20 holes, one hole is unused. Cable Length : 25cm (include connector)

Rank No. #8

zdyCGTime USB 3.1 Front Panel Header to USB 3.0 20Pin Header Extension Cable for ASUS Motherboard 20cm Black (20p)

Work for ASUS Motherboard. plz note that ONLY support usb3.1/usb3.0 device, it can't work at USB2.0(480Mbps)
USB 3.1 require a different front panel header than USB 3.0
First motherboard with this is the ASUS ROG MAXIMUS IX FORMULA,STRIX Z270I/Z270G etc.There are no official release of the specs for the USB 3.1 header yet (as of this writing)
The USB 3.1 port interface is using the USB 3.0 pin set and more. It is design to be backwards compatible.
USB 3.1 Front Panel Header to USB 3.0 Front Panel Header 20Pin Extension Cable 20cm

Rank No. #9

EZDIY-FAB USB 3.0 (3.1 Gen 1) Internal (19-Pin) Header to USB 3.1/3.2 Type-C (20-Pin) A-Key Front Panel Adapter

Supports all motherboards with USB 3.0/ 3.1 19-pin header
Motherboard: USB 3.0 Internal 19 Pin MB Male Housing Header
Front Panel: USB 3.1 A-Key 20 Pin Front Panel Female Header / NOTE: Does not convert from 5GB/s to 10GB/s
Easy way to access USB-C and support front panel header, doesn't require to have latest motherboard to experience USB-C technology.

Rank No. #10

GINTOOYUN USB 3.0 Header Extension Cable, 19/20 Pin 1 to 2 Y Splitter Internal Extension Adapter DIY(5.9 inch)

USB 3.0 header extension cable for motherboards. 1 to 2 Y Splitter design. Connector 1: Double USB 3.0 19/20 pin male; Connector 2: USB 3.0 19/20 pin female. This cable is a great option for SLI configurations that need access to USB 3.0 headers.(Note: cannot compatible Cor.iCUE 7000X)
GINTOOYUN USB 3.0 19/20 pin internal extension adapter supports data transmission speeds of up to 5Gbps, high performance, used for stable signal and data transmission
5.9 inch USB3.0 is full duplex, independent of the four differential signal USB 3.0 signals. This cable can extend the one USB 3.0 19P on the motherboard into two 19P
Black flat ribbon wire, much more durable and flexible comparing to individual crimped wires; These cables offer a clean look, making it easier to deal with dust and avoid overheating
Note: The end that connects to the motherboard is loose for a few of motherboards since the USB 3.0 ports on different motherboards have a bit difference. There is not USB 3.0 connector to work with all of motherboards currently,if you have any doubts, please feel free to contact us

Rank No. #11

TGOOD 9pin USB Header Male 1 to 2 Female Extension Splitter Cable Connector Adapter (Male 1 to 2 Female)

This listing is for 1pc multiplier, One connect to motherboard 9pin(10pin) port, Split to 2x 9-Pin(10-pin)
Port Multiplier version: 1 to 2
Connector A: 9Pin USB Header Male
Connector(s) B: 2X 9Pin USB Header Female
Lenght: about 30CM

Rank No. #12

GINTOOYUN USB 3.0 Header Extension Cable 1Ft 19/20 Pin 1 to 2 Y Splitter Internal Extension Adapter DIY(30cm 11.8 inch)

USB 3.0 header extension cable for motherboards. 1 to 2 Y Splitter design. Connector 1: Double USB 3.0 19/20 pin male; Connector 2: USB 3.0 19/20 pin female. This cable is a great option for SLI configurations that need access to USB 3.0 headers.(Note: cannot compatible Cor.iCUE 7000X)
GINTOOYUN USB 3.0 19/20 pin internal extension adapter supports data transmission speeds of up to 5Gbps, high performance, used for stable signal and data transmission
11.8 inch USB3.0 is full duplex, independent of the four differential signal USB 3.0 signals. This cable can extend the one USB 3.0 19P on the motherboard into two 19P
Black flat ribbon wire, much more durable and flexible comparing to individual crimped wires; These cables offer a clean look, making it easier to deal with dust and avoid overheating
Note: The end that connects to the motherboard is loose for a few of motherboards since the USB 3.0 ports on different motherboards have a bit difference. There is not USB 3.0 connector to work with all of motherboards currently,if you have any doubts, please feel free to contact us

Rank No. #13

JoyReken USB Front Panel Adapter, Vertical USB C Header Adapter, USB 3.1 Type-E Key-A to USB 3.0 20Pin Header Converter for Type C Motherboard

Supports all motherboards with USB 3.0/ 3.1 19-pin header
Motherboard: USB 3.0 Internal 19 Pin MB Male Housing Header
Front Panel: USB 3.1 A-Key 20 Pin Front Panel Female Header / NOTE: Does not convert from 5GB/s to 10GB/s
Easy way to access USB-C and support front panel header, doesn't require to have latest motherboard to experience USB-C technology.
Note on USB current over limit issue: The power from the USB 3.0 header on the motherboard has a power rating at 4.5W (0.9A x 5V). However, many USB-C devices can withdraw power up to 100W (20A x 5V). This may result in a power shut down to protect the motherboard and its components.

Rank No. #14

Oassuose USB 3.1 Front Panel Adapter,Internal Vertical USB 3.0-IDC 20 Pin/19Pin to Type E Key-A 20 Pin Header Adapter for Type C Panel Mount Adapter

★【 Advantage 】:USB C header adapter Supports All Computer Motherboards with USB 3.0/ 3.1 19-pin header -(Blue or black socket).Not limited to operating system.
★【 Function】:USB 3.0 19Pin to Type-E 20Pin front panel adapter, the connection is stable.can be extended to PC front pannel USB-C ports.Connect any of your Type C interface devices.
★【Parameter】: Supports data transfer with USB-C devices at speeds up to 5Gbps. Both sides can be inserted. The maximum voltage is 5V, the current is 0.9A, and the power is 4.5W. PD charging is not supported.
★【Craft】:The high-quality 4-layer PCB circuit design, stable signal, strong anti- interference ability.LED indicating working status, and good connector metal contacts make the product reach a stable working state.
★ 【High-quality service】: provides a 24-month warranty and lifetime customer support, please rest assured to buy. If you have any questions, please feel free to contact us, you will get an answer within 24 hours.

SaleRank No. #15

Duttek USB 2.0 Header Splitter Cable, 9 Pin USB2.0 Extension Cable, 9PIN USB2.0 Femle to Dual 9 PIN Male Extension Cable for Computer Motherboard Adapter 1Pack

[USB Motherboard Splitter] 1 connector: 9-pin female motherboard adapter, 2 connectors: 2*9-pin male motherboard adapter splitter cable.
[USB 2.0 header splitter cable ] When your device runs low on power, you can solve the problem by connecting it to the motherboard with a USB 3.0 to 2.0 motherboard adapter cable, which also allows for data transfer.
[USB 2.0 splitter motherboard cable] The mainboard connector is wrapped in rubber, which serves to reinforce the connection and is ideal for frequent plugging, greatly increasing the product's warranty life. It is wired strictly according to standard USB definitions, with a anti-plug design, so as long as the hole position is correct, you can plug it in (with the plug design, if you plug in the wrong plug, it won't work).
[Motherboard usb splitter cable] Size: 16.5cm*1.2cm*0.5cm, Y-shaped cable with a length of about 13cm and a diameter of 1.2mm.
Package includes: 1 package of 9-pin female to 9-pin male Y-shaped cable. Please feel free to contact us if you have any questions.

Rank No. #16

Duttek USB 3.0 Header to USB 2.0,USB 3.0 to USB 2.0 Motherboard Adapter Cable,19 Pin USB3.0 Male to 9 Pin USB2.0 Female Motherboard Cable Adapter Converter 6 inch/15cm (2-Pack)

19 pin USB 3.0 motherboard adapter offers a throughput of up to 4.8Gbps when used with a USB 3.0 host and device , which astounding the capability of USB 2.0 (480Mbps).
usb 3.0 header to usb 2.0 adapter cable use molded-strain relief construction for flexible movement, durability, and fit.
USB 3.0 to USB 2.0 motherboard adapter cable complies with fully rated cable specification using braid-and-foil shield protection.
USB3.0 technology of USB 3.0 motherboard adapter is similar to PCI Express 2.0(5 Gbit/s) It uses 8 B10B encoding,linear feedback shift register (LFSR) scrambling for data, spread spectrum.
Let your USB 3.0 motherboard adapter 19 pin device connected the USB 2.0 9 pin motherboard.

Rank No. #17

Rocketek 9pin USB Header Male 1 to 4 Female Extension Card USB 2.0 Splitter Cable Connector for Motherboard, Adapter Port Multiplier for CPU, WiFi Receiver, Fans, and RGB Light …

✔ Motherboard USB header splitter 1 to 4 ports Hub, wire belt shielding
✔9 Pin USB Header for PC motherboard Can Prevent short circuit outlet design. motherboard USB splitter can prevent accidental removal of circuit board, pins and case the risk of short circuit
✔ USB Splitter Convert motherboard USB 2.0 Female to 4 Females. High-quality electronic components
✔ 30cm 9 pin USB Header Male 1 to 4 and hub connecting
✔ Self-Stick 9 pin Motherboard USB Splitter for easy installation, automotive adhesive tape is attached on the back, can be directly fixed on the mainboard or chassis

Rank No. #18

USB 3.0 Motherboard Adapter Cable 20 Pin Header Convert to Two Female A Type Lead for DIY Gaming PC 25cm

Connector Type : USB 3.0 internal motherboard 20/19 Pin header female to Two USB 3.0 A Female (PCI bracket Excluded)
This adapter provides a single standard USB 3.0 female connection, connecting USB 3.0 devices to the motherboard like Asus Sabertooth 990FX, plug and play easily, perfect for gaming motherboard, DIY PC
This USB 3.0 cable can be installed into a standard PC slot and will be connected internally to any USB 3.0 20 pin header socket. It expands your system by two external USB 3.0 ports and enables the connection of different USB devices, e.g. Card Reader, HDD, USB hubs, Zalman E11, Zalman Z11 Plus Midi Tower Case, Corsair Obsidian 800D, Asrock z68, Icy Box multicard reader, Coolermaster Silencio case, external enclosure etc
2 ports USB 3.0 Type A female to motherboard header adapter cable, superspeed USB3.0 extension code, USB 3.0 female port backwards compatible with USB 2.0
NOTE: The Y shape cable has 19 pins but the connector has 20 holes, one hole is unused. Length : 25cm (include connector)

Rank No. #19

Longdex 2PCS USB 3.0 20 Pin Female to USB 2.0 9-Pin Male Motherboard Adapter Converter Cable

Supports full double data transfer rates up to 5Gpbs.
Compliant with USB3.0 production specifications, plug and play.
Elastic PVC shell, flexible and easy to break, durable. Double shielding of braided copper mesh and aluminum foil can greatly reduce electromagnetic interference.
The new USB 3.0 20pin motherboard can be connected to the old USB 2.0 such as the optical drive panel, floppy drive panel, and USB 2.0 device to USB3.0 device through the cable.
Length: 5.12Inch / 13cm. Quantity: 2PCS.

Rank No. #20

PCI-E X1 to 2 Ports 19 Pin USB 3.0 Header PCI Express to Dual 20 Pin USB 3.0 Card

Chipset: NEC UPD720201
Extend with 2 USB3.0 19pin connector (can expand 4 USB 3.0 ports) from desktop PC which with one free PCIe slot.
SuperSpeed USB 3.0 is fully compatible with original USB system, peripherals and cables.
Fully compliant with onelane (x1) PCI Express 2.0 specification.
Two internal 5Gbps SuperSpeed USB 3.0 19pin headers.

Last update on 2023-08-08 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Usb 20 Header Splitter?

Do you get stressed out thinking about shopping for a great Usb 20 Header Splitter? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Usb 20 Header Splitter, which is why we have assembled a comprehensive list of the greatest Usb 20 Header Splitter available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Usb 20 Header Splitter that you consider buying. Your questions might include the following:

Is it worth buying an Usb 20 Header Splitter?
What benefits are there with buying an Usb 20 Header Splitter?
What factors deserve consideration when shopping for an effective Usb 20 Header Splitter?
Why is it crucial to invest in any Usb 20 Header Splitter, much less the best one?
Which Usb 20 Header Splitter are good in the current market?
Where can you find information like this about Usb 20 Header Splitter?

We’re convinced that you likely have far more questions than just these regarding Usb 20 Header Splitter, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Usb 20 Header Splitter, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Usb 20 Header Splitter. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Usb 20 Header Splitter buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Usb 20 Header Splitter currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Usb 20 Header Splitter has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Usb 20 Header Splitter?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Usb 20 Header Splitter.
Customer Ratings: Number ratings grade Usb 20 Header Splitter objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Usb 20 Header Splitter.
Product Quality: You don’t always get what you pay for with an Usb 20 Header Splitter, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Usb 20 Header Splitter is should be an indication of how long it will work out for you.

We always remember that maintaining Usb 20 Header Splitter information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Usb 20 Header Splitter is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What is internal USB header?

A: While internal USB ports are rare on consumer motherboards, these headers (especially the USB 2.0 ones) are found on just about every motherboard around . There are very inexpensive adapter cables/modules you can use to turn those headers into functional USB ports and they require no more work than opening your case and plugging them in.

Q: What is an USB port splitter?

A: What is a USB port splitter? A USB splitter is a compact hardware device designed to divide one USB port into several lines so that a user can attach one peripheral to several computers simultaneously. You simply connect your USB device to this hardware and it runs separate communication lines to each computer.

Q: What is a hub splitter?

A: The hub is a small device with female USB ports that usually sits next to your computer on your desk. However, a USB splitter divides one line into two and is usually used to plug one printer into two computers. Much like a telephone wire splitter, the printer plugs into the splitter and two lines run to separate ports on each computer.