Contents
20 Best Vantec Sata Pcie Raid Controller Card of 2023 – Romance University
After hours researching and comparing all models on the market, Romance University finds out the Best Vantec Sata Pcie Raid Controller Card of 2023. Check our ranking below.
2,204 Reviews Scanned
- 【4 Port SATA PCIE 3.0 Card】The PCIE SATA card allows you to add 4 SATA 3.0 6Gbps devices to your computer. If your motherboard has RAID function, you could make a RAID with this SATA Card. (WARM TIPS: Can not Support Hardware RAID)
- 【Powerful Chipest】This SATA controller card adopts Marvell 88SE9215 chip, making this card more stable and compatible. Port Multiplier FIS-based and Command-based switching supported.
- 【Advance Heatsink】The SATA card uses heat sink technology to disperse heat away from the core components to improve reliability and performance.
- 【Compatibility】with a low profile Bracket System Compatible with Windows XP /2003 / 7 / 8 / 10 / MAC / NAS / Linux OS. Support PCIe X1 / X4 / X8 / X16 slot. It also comes with a low profile bracket to fit different sizes of desktop computers.
- 【Includes All Required Accessories】Kit includes: 1 X 4-port SATA expansion card, 4 X SATA cable(40cm/15.8in), 1 X low-profile bracket, 1 X screwdriver, 2 X screw kit, 1 X anti-static bag.
- Using a ASM1806 PCIe bridge elimate the need for a Port Multiper when combining the Dual Marvell 9215 Chipset allowing to reach maximum bandwidth per port.
- Compliant with PCI-Ecpress Specification v2. 0 and backwards compatible with PCI-E 1. x
- Supports Communication Speeds: 6. 0 Gbps, 3. 0 Gbps, 1. 5 Gbps
- Support Native Command Queue (NCQ). Support Hot plug and Hot Swap.
- Supports AHCI 1. 0 programming interface registers for the SATA controller
- Compatible with Serial SATA 3.0 specification, backward compatible with SATA2.0 SATA1.0. Compliant with PCI-Express v2.0 specification and backward compatible with PCI-Express v1.0. Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i.
- Support FIS based on port multiplier switch or command switching. Compatible with SATA6G, 3G and 1.5G hard drives. Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i.
- The SATA interface mode of PCIE to SATA3.0 is AHCI mode. If you want to plug in the system disk on our card, the premise is that your system disk must be installed in AHCI mode when installing the system on the motherboard. Otherwise, the system cannot be started through our transfer card.
- If it is determined that the SATA interface installation system of the system disk inserted in the motherboard is AHCI mode, then you can directly insert the hard disk into our card, and then enter the motherboard BIOS to set the system disk as the first boot.
- If the two conditions are met, if the hard disk interface of the motherboard still fails to start, or restarts repeatedly, it may be caused by the conflict between the hard disk interface of the motherboard and our transfer card. The solution is to enter the motherboard BIOS and set the hard disk interface option of the motherboard to Disabled, then save and restart to start the system.
- 【UNLOCK THE PERFORMANCE OF YOUR SSD WITH A PCIE SATA CARD】ACTIMED PCIe Express 3.0 to 8-Ports Adapter opens the possibility to connect Multiple HDD/SSD to your computer at peak performance.
- 【A SIMPLE CONNECTION】 Simply plug and play style setup. Install a hard drive to this component. Massive support of up to 128TB of storage.
- 【POWERFUL CHIPSET & ADVANCE HEATSINK】 Maximize your efficiency, stabilize your performance, and reduce error rate with ASM1064 & JB575 chip. Also, optimized cooling with aluminum heat transfer and maximize the effect of heat dissipation with a Heat-Sink.
- 【EXTENSIVE COMPATIBILITY】 Fully COMPATIBLE with X1/ 4X/ 8X/ 16X Slots on the mainboard and with compatible with both 2.5” SATA HDD/ SSD and 3.5” SATA HDD. Compatible with LINUX, Windows XP, and newer, MAC OS, and others.
- 【THE PERFECT SOLUTION】 Kit includes: 1 x PCI-E to 8-port Adapter (Includes heatsink), 8 x SATA Cables, 1 x Low-Profile Bracket, 1 x 15pin SATA Power Splitter Cable, 1 x Driver CD, and 1 Instruction Manual. (SSD Not Included)
- ➤You could make the system to boot from this SATA controller but non RAID.If your motherboard has RAID function, you could make a RAID with this SATA Card.
- ➤4 Ports Adapter Card --- You could add 4 6Gb/s SATA 3.0 devices to your computer with this PCIe SATA card.
- ➤Chipset --- With using The Asmedia1064 chip,more stable and compatible.Port Multiplier FIS-based and Command-based switching supported.
- ➤For All PCs --- with a low profile Bracket and 4 SATA Cable，compatible with 99% size chassis on the market.Compatibility issues may occur due to the different motherboard environments in which it is installed.
- ➤System Support --- Connect 4 large capacity storage devices at the same time. Compatible with Windows XP /2003 / 7 / 8 / 10 / MAC / NAS / Linux OS.Any question please connect us: Ziyituod@evisionde.com
Last update on 2025-07-03 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Vantec Sata Pcie Raid Controller Card?
Do you get stressed out thinking about shopping for a great Vantec Sata Pcie Raid Controller Card? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Vantec Sata Pcie Raid Controller Card, which is why we have assembled a comprehensive list of the greatest Vantec Sata Pcie Raid Controller Card available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Vantec Sata Pcie Raid Controller Card that you consider buying. Your questions might include the following:
- Is it worth buying an Vantec Sata Pcie Raid Controller Card?
- What benefits are there with buying an Vantec Sata Pcie Raid Controller Card?
- What factors deserve consideration when shopping for an effective Vantec Sata Pcie Raid Controller Card?
- Why is it crucial to invest in any Vantec Sata Pcie Raid Controller Card, much less the best one?
- Which Vantec Sata Pcie Raid Controller Card are good in the current market?
- Where can you find information like this about Vantec Sata Pcie Raid Controller Card?
We’re convinced that you likely have far more questions than just these regarding Vantec Sata Pcie Raid Controller Card, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Vantec Sata Pcie Raid Controller Card, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Vantec Sata Pcie Raid Controller Card. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides an Vantec Sata Pcie Raid Controller Card buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Vantec Sata Pcie Raid Controller Card currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Vantec Sata Pcie Raid Controller Card has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Vantec Sata Pcie Raid Controller Card?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Vantec Sata Pcie Raid Controller Card.
- Customer Ratings: Number ratings grade Vantec Sata Pcie Raid Controller Card objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Vantec Sata Pcie Raid Controller Card.
- Product Quality: You don’t always get what you pay for with an Vantec Sata Pcie Raid Controller Card, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Vantec Sata Pcie Raid Controller Card is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining Vantec Sata Pcie Raid Controller Card information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Vantec Sata Pcie Raid Controller Card is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
FAQ:
Q: Why upgrade to SATA 6gb/s with Vantec 2 channel 4-port SATA host card?
A: Updating to SATA 6Gb/s has never been easier with the Vantec 2 Channel 4-Port SATA 6Gb/s PCIe Host Card. Integrated with the latest SATA technology; enjoy faster transfer rates of up to 6Gb/s.
Q: Is PCI Express compatible with SATA drives?
A: It is also backward compatible with previous generation of PCI Express 1.0 technology. Using the onboard RAID firmware, the 4 SATA drives attached to this controller can be easily configured as 4 individual ports with no RAID or with RAID 0, RAID 1, RAID 10, and HyperDuo capabilities.
Q: What kind of RAID card do I need for a server?
A: 4 Channel 6-Port SATA 6Gb/s PCIe RAID Host Card The UGT-ST644R design encompasses great design and server technology into simple RAID Host controller. It uses the latest storage technology to bring SSD caching storage to the HDD drive to gain unparalleled access speed.
Q: Can I use a SATA card as a RAID controller?
A: Answer: Yes, you can use this card as an individual SATA controller and use it as an OS software RAID, but make sure you understand that software RAID is very much slower than hardware RAID and software RAID uses more of your CPU resources and will slow down your system.