Contents

The Best vertical gpu bracket of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best vertical gpu bracket of 2023. Check our ranking below.

2,149 Reviews Scanned

SaleRank No. #1

Antec Vertical GPU Mount, PCIE 4.0 Riser Cable High Speed Flexible Extender Card Extension Port 90 Degree 200mm, Black (GPU Vertical Mount only Support Full-Break PCIE Expansion Slot)

Compatible with RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800 ; Supports PCIE 4.0/3.0/2.0/1.0 ; Compatible with the most GPU / MOBO and PC Cases.
With movable bracket, More flexible in using PC case interior space. NOTE: only support FULL-BREAK PCIE Expansion Slot Chassis.
High stability and full PCIe Gen4 x16 speed, plug and play.Backward-compatible with PCIE 3.0/PCIE 2.0/PCIE 1.0.
Gold-Plated Pin Connections: Gold-plated PCI pins allow maximum durability with a rated 400g of retention force per contact pair.
Ultimate High Speed: The extender is capable of expanding bandwidth up to 16Gbps and beyond, featuring extremely fast graphic data transmission.

Rank No. #2

EZDIY-FAB Vertical Graphics Card Bracket PCIE Slot Plate, Vertical GPU Mount, Video Card VGA Support Kit -Black

The 7-PCI bracket slot can be replaced as a vertical mount for the graphics card.
Most affordable way to vertical your graphics card.
Supports general graphics card with 2 PCI brackets, doesn't support 3 PCI bracket card.
Not applicable for the chassis which PCI slots with grills, which will block DP/HDMI cable connection.
The package doesn't contain riser cable, you could refer to EZDIY-FAB Riser Cable by searching B09NBB166J, B08S71PLXH, B08SBMFCGG

Rank No. #3

EZDIY-FAB Vertical PCIe 4.0 GPU Mount Bracket Graphic Card Holder with 5V 3 Pin ARGB LED Module, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle (White)

New designed bracket to vertically show off GPU. Supports most 1, 2, and 3 slot graphic cards. Designed for most full/mid ATX tower with at least 7 available PCI slots.
High quality material increases structural toughness and supports the large graphics card weight on the market. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape
Thanks to Stretchable Structure design, you would be able to connect HDMI, DP cable to your GPU without hassle, compatible to PC chassis with PCI grilles.
Compatible with Latest Models, Features White Gen4 riser cable and compatible with RTX 4090, RTX 4080, RTX 4070ti, RTX 30' Series, and RX70' Series
Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount./ Please refer to length spec image and confirm that there is enough space of your chassis.

SaleRank No. #4

Cooler Master Master Accessory Vertical Graphics Card Holder Kit Version 2 with Premium Riser Cable PCI-E 3.0 x16-165mm, Compatible with All Standard ATX Chassis (MCA-U000R-KFVK01)

Showcase Your Graphics Card: The vertical graphics card holder Kit allows vertical installation of a GPU to better show off the visual design of the GPU and its cooler.
Compatible with all Standard ATX Chassis: The newly revised vertical graphics card holder kit fits all standard ATX chassis with at least 7 available PCI slots.
Modular, Instantly Adjustable Design: The position of the GPU can move back and forth to allow cables to pass through chassis with either closed or open PCI slots.
Durable, High Quality Materials: Thick SGCC steel prevents the largest and heaviest GPUs from bending the GPU holder.
Cooler Master Riser Cable Version 2 included: A high quality Cooler Master version 2 riser cable completes the vertical GPU holder package.

Rank No. #5

EZDIY-FAB Vertical Graphics Card Holder Bracket with ARGB 5V 3Pin LED,GPU Mount,Video Card VGA Support Kit with PCIE3.0 Riser Cable- Black

Vertical GPU Bracket with RGB LED effects, Synchronizable RGB lighting via motherboard (AURA, Mystic, Fusion):Support M/B 3 pin RGB Header (5V, D, G), Please note : Not Support 4pin RGB header (+12V, G,R,B), 12 volts can destroy LED.
Vertically display a GPU graphics card, Compatible with most brand's Graphic card, show off the visual design of the GPU and its cooler.
Designed for most ATX case with at least 7 PCIE slots in the market
The 20cm/7.8in PCIE riser with high quality TPE cable and sectional design allows air ventilation and lowers working temperatures for better overall system performance. However, if you intend to use a PCIe 4.0 graphics card, you will need to enter the BIOS and adjust the PCIe slot to Gen3 mode, as the riser only supports PCIe 3.0.
With movable bracket, More flexible in using PC case interior space. NOTE: Please check your case with enough space

Rank No. #6

EZDIY-FAB Vertical Graphics Card Holder Bracket Support with Multi-Angle,GPU Mount,Video Card VGA Support Kit with PCIE3.0 Riser Cable- Black

The adjustable GPU bracket allows to show off their GPUs and enhance cooling efficiency by mounting it vertically, or at an angle between 0 and 45 degrees, on the PSU shroud.
The base bracket is equipped with a strong magnet, which can make the bracket stable on the PSU shroud
The latest riser cable connects the graphics card to the PCIe slot of the motherboard, a flexible TPE flat cable with a length of 200 mm. Only support PCIE3.0
Before buying, please confirm whether there is enough space inside the chassis to install
For long or heavier graphics cards, please adjust to an appropriate angle to avoid falling

Rank No. #7

EZDIY-FAB PCIe 4.0 GPU Mount Bracket with ARGB LED Module, Multi-Angle Adjustment with Riser Cable, Compatible to RTX4090, 4080, 4070ti- White

Enhance Cooling Efficiency: Adjustable bracket allows mounting of GPU vertically or at an angle for better heat dissipation on PSU shroud or any metal plane
Synchronized ARGB Lighting: Bracket features ARGB LED lighting effects and can sync with motherboard lighting (AURA, Mystic, Fusion) via M/B 3-Pin ARGB Header; does not support 12V RGB.
Strong Magnet Base: Equipped with a magnet for stable placement on PSU shroud
Wide Compatibility: Supports most 2 and 3 slot graphics cards, and made of high-quality metal material for increased structural toughness
Compatible with Latest Models: Features Gen4 riser cable and compatible with RTX 4090, RTX 4080, RTX 4070ti, RTX 30' Series, and RX70' Series. Prior testing of riser cable onto GPU is recommended. Please refer to length spec image to confirm compatibility with your chassis.

Rank No. #8

GPU Support Bracket Dual Brace: Fan mounting Adjustable Aluminum Graphics Card GPU Sag Bracket Video Card Stand Holder Graphics Card Bracket, Support Big GPU - 88mm

Dual Brace and Mounting Fan Design: provide your graphics card double protection and stability, particularly suitable for the new heavy graphics card.🔺Height is adjustable, MAX 88mm
Easy to Install and Widely Compatibility: the bottom of the GPU bracket is slidable,and the height is adjustable. you can DIY the height and placement location to meet your requirements, it is universal for various chassis like ATX, MATX and ITX etc. it can fix on your bottom fan (12 or 14cm fan) by screws, and without blocking vent.
Aluminum GPU Support Bracket : The stand is made of anodized aluminum alloy and CNC Process, provides strength, ruggedness, and corrosion resistance, can be used as a long-term replacement.
GPU Support with Non-Slip Rubber Pad: There are non-slip rubber pads on the arm, which is convenient for you to install without scratching the graphics card.
Package include: 1x 88mm Graphics Card bracket with dual brace, 1x mini bubble spirit level, 1x Screwdriver, Screws

Rank No. #9

EZDIY-FAB PCIe 4.0 GPU Mount Bracket Graphic Card Holder Multi-Angle Adjustment, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable - White

The adjustable GPU bracket allows to show off their GPUs and enhance cooling efficiency by mounting it vertically, or at an angle between 0 and 45 degrees, on the PSU shroud or any metal plane.
The base bracket is equipped with a strong magnet, which can make the bracket stable on the PSU shroud
Feturing with Gen4 riser cable, supports PCIE 4.0/3.0/2.0/1.0,Compatible with RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800.
Supports most 1, 2, and 3 slot graphic cards, high quality metal material increases structural toughness and supports the large graphics card on the market.
Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount./ Please refer to length spec image and confirm that there is enough space of your chassis.

SaleRank No. #10

Phanteks (PH-VGPUKT4.0_04) Gen4 Vertical GPU Bracket Reinforced, 220mm Flat Line PCI-E Gen4 x16 Riser Cable Kit, Black

Vertical mounting system for any graphics card. Compatible with 1-slot, 2-slot, 3-slot and 4-slot graphics cards.
7 PCI slot (ATX) chassis required. Can be directly installed without modding in the Phanteks Eclipse G300A/G360A/G500A/P600S and Evolv X
PCI-E Gen4 x16 Riser Cable included with Dual layer individual shielded cables.
Premium and durable cable design supporting full Gen4 speeds.

SaleRank No. #11

Lian Li O11DMINI-1 Vertical GPU Bracket KIT /PCIE 3.0 / Black -O11DMINI-1X-3

PCI-E 3.0 Riser Cable (Black)
PCIe Riser Cable : Gen 3.0
VERTICAL GPU BRACKET KIT
Vertical GPU mount accessory for the O11D MINI
NOT Compatible with RTX 3080/3090 and PCIE 4.0

Rank No. #12

EZDIY-FAB Vertical Graphics Card Holder Bracket,GPU Mount,Video Card VGA Support Kit with 20cm/7.8in PCIE 3.0 Riser Cable

Vertically display a GPU graphics card, Compatible with most brand's Graphic card, show off the visual design of the GPU and its cooler.
Designed for most ATX case with at least 7 PCIE slots in the market
PCIE riser with high quality TPE cable and sectional design allows air ventilation and lowers working temperatures for better overall system performance. Only supports PCIE 3.0
High quality material increases structural toughness and supports the large graphics card weight on the market. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape
Please refer to length spec image and confirm that there is enough space inside the chassis.

Rank No. #13

Antec GPU Support Bracket, Graphics Card GPU Brace Support Video Card Sag Holder Holster Bracket (Black)

All-aluminum metal material provides firm and long-lasting support, strong load-bearing capacity, strong grip on the bottom, fixed height by screws does not slide
Simple installation, no damage to the graphics card, can be adjusted according to the weight and size of different graphics cards
Segmented design, compatible with traditional MATX, ITX and long PSU bracket cases, it can fulfill users’ various needs
A.Tool-less screws are used for fixing the support module.B.The support module is equipped with cushioning scratch-proof pad.C.The base adopts high glossy process.
The bottom is equipped with strong adhesive, easy to paste and tear

SaleRank No. #14

Aivalas GPU Support Bracket, Graphics Video Card Brace with Height Adjustable, Anti Sag Holder for Universal Graphics Card Sag, GPU Stand with Magnet and Rubber Pad (Black)

Does A Good Job of Preventing GPU Sag - The GPU support bracket can be used to avoid your graphics card from sagging or damaged due to the weight of the card. The appearance of our gpu stand is very unobtrusive and does not detract form the aesthetics of your computer.
Exquisite Workmanship - This video card support bracket is made of premium quality aluminum which is sturdy and not deformed, provides strong and long-lasting support to your VGA Card.
Magnetic Non-Slip Base - Being magnetic, graphics card stand holder is able to stick to the PSU shrouds in cases and has a good degree of extensibility. The bit has rubber on the ends which adds a nice grip to where it’s placed, preventing any slippage.
Basic But Effective Solution - Simply twist the nut of anti sag bracket gpu to adjust height as you need, then place it between the case and your GPU Card. PLEASE make sure the minimum support height is 2-7/8” and the maximum support height 4-3/4”.
Wide Application - Adopt with height adjustment design, our graphics card support brace compatible with most kinds of chassis configurations (such as ATX, M-ATX, ITX chassis structure and so on), meets various user hosts.

Rank No. #15

CALIDAKA GPU Vertical Mount Bracket, Flexible Vertical PCI E Bracket, Multi-Angle Adjustment Vertical Graphics Card Holder Bracket Support,GPU Mount,Video Card VGA Support Kit

Full-Speed: PCI-E 3.0 x16 128Gbp/s BANDWIDTH - Deliver all the performance of PCIe 3.0 to your GPU.
Compatible With: Support GTX1080, GTX1080Ti, RTX2060, RTX2070, RTX2080, RTX2080Ti, RX570, RX580, RX590, RX5700 XT, etc, support for all graphics cards produced after 2015.
EMI Shielded: Electromagnetic interference (EMI) shielding ensures maximum performance because of the shield is made of TPE plasti-c sleeve and PE insulation layer.
Fully Flexible: Six-wire bande-d construction allows for full flexibility to reach through even the tightest gaps. The six-wire design is far better than the five-wire and seven-wire designs in terms of transmission, shielding, and attenuation.
Unassembled Kit: Unassembled, you need to assemble it by yourself.

Rank No. #16

Uyubao GPU Support Bracket, Gpu Anti Sag Bracket, Graphics Card GPU Support, Video Card Sag Holder Bracket, GPU Stand, L(74mm-120mm)

✅【Screw adjustment design】The minimum size of the GPU Bracket is 7cm, and the maximum size is 12cm.Compatible with ATX, M-ATX, ITX chassis structure, and universal VGA graphics card bracket. Meet various user hosts to avoid video card sagging.
✅【Aluminum Alloy Metal】The GPU support is made of aluminum alloy, anodized, durable, and not easy to rust, can providing the graphics card with lasting support for more than ten years.
✅【Magnetic Non-Slip Base】The magnet hidden in the base is designed for easy installation and more stable standing in the chassis.
✅【The workmanship of the detail process】The small graphics card support frame is made of three complex processes: polished anode, sandblasted anode and CNC high-speed edge-washing high-gloss process. The full anode process can maintain the durability.
✅【Tool-free fixing module】The support module is equipped with a cushioning anti-scratch pad and a base high-gloss process.After the gpu bracket is installed, you can use the level provided to check if it stays level. Any questions please contact: [email protected]

Rank No. #17

IBEST IMPETUS Vertical GPU Mounting Bracket Graphics Card Holder Kit with PCIE Riser Cable 90 Degree Right Angle 25cm Black

【Scope of Application】PCI Express PCIE3.0 16X cable card expandable port and expandable bracket for expandable motherboard when space is insufficient
【Product characteristics】High-quality solder joints and gold-plated contacts to achieve optimal conductivity and long-term use, as well as ultra-high-speed transmission performance
【Compatibility】This extension bracket and display card extension line are compatible with most brand graphics cards and GPU/motherboard
【Firmness】The 4PCS magnet is placed at the bottom of the bracket, which is easy to absorb the box body, shock-proof and scratch-proof
【Product Size】Flexible Cable with 7.7 inch Extension Line of Display Card Converter Board

Rank No. #18

EZDIY-FAB GPU Holder Brace Graphics Card GPU Support Video Card Holder Bracket, Strenchable Structure, Video Card Sag Holder/Holster Bracket Support RX7990XTX, RTX4090, Black-341-2

The Slide Type Support Structure is a flexible mechanism that can support GPUs of different lengths (174-280 mm), providing secure installation and adaptability.
Features a stretchable design that provides up to 30mm of expandable space, allowing it to accommodate graphics cards of varying sizes with ease. Its expandable nature enables it to adjust both inward and outward to securely hold the graphics card in place.
Double bracket feet to provide superior stability for your graphics card, with added flexibility to install the each feet separately or together for greater compatibility with a range of GPU configurations.
Experience durable and stable support with our all-metal bracket structure, complemented by a sleek anodized sandblasted aluminum panel for a stylish and sophisticated look.
Universally compatible with a variety of graphics cards and PC cases, including traditional ATX cases, allowing for easy installation and worry-free use with most existing system.

SaleRank No. #19

Antec RGB GPU Support Bracket, Graphics Card Holder, Tempered Glass, Addressable RGB 5V 3PIN RGB Connector

The unique ARGB lighting on the tempered glass creates the sense of science and technology effect for the whole graphic cards.
Compatible with the MATX, ATX, ITX and long PSU bracket cases, it can fulfill users’ various needs.
Simple installation, no damage to the graphics card, can be adjusted according to the weight and size of different graphics cards.
The solid base is reinforced by a strong magnet to secure it in place. Ensure that the graphic card can have the most stable support under different layout modes.

Rank No. #20

Graphics Card GPU Support Bracket, Heavy-Duty GPU Graphics Card Stand GPU Sag Bracket Video Card Anti Sag GPU Holder Mini GPU Mount Brace for Prevent Graphics Card - 1.46-1.97 in Adjustable

Graphics Card Holder -- This adjustable GPU support bracket is to provide support for the end of the graphics card, to keep the graphics card in a parallel state, and to avoid the graphics card from malfunction due to gravity deformation. If you have a big and heavy graphics card, you might need 2 or more GPU anti sag bracket.
All-aluminum Metal Material-- Updated heavy duty graphic card support brace, this GPU anti sag stand is made of quality aluminum metal material, provides strong and long-lasting support.
Magnet Base Design-- The magnet hidden in the GPU support bracket base is designed for easy installation and more stable standing in the chassis. Non slip when using this GUP stand.
Adjustable Height Graphic Card Holder -- Simply twist the nut of graphic card support stand to adjust height as you need, no need other tools. This mini GPU bracket support height from 1.46inch to 1.97inch (3.7-5cm). Adjustable height graphics card stand make it wide compatible with many chassis configurations.
100% Satisfaction and Guaranteed-- If for whatever reason you are not absolutely 100% satisfied by our small anti sag GPU support bracket , we will refund or replace new vertical GPU mount support, no question asked! All question will be respond within 12 hours.

Last update on 2023-08-08 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best vertical gpu bracket?

Do you get stressed out thinking about shopping for a great vertical gpu bracket? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching vertical gpu bracket, which is why we have assembled a comprehensive list of the greatest vertical gpu bracket available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for vertical gpu bracket that you consider buying. Your questions might include the following:

Is it worth buying an vertical gpu bracket?
What benefits are there with buying an vertical gpu bracket?
What factors deserve consideration when shopping for an effective vertical gpu bracket?
Why is it crucial to invest in any vertical gpu bracket, much less the best one?
Which vertical gpu bracket are good in the current market?
Where can you find information like this about vertical gpu bracket?

We’re convinced that you likely have far more questions than just these regarding vertical gpu bracket, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for vertical gpu bracket, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible vertical gpu bracket. Make sure that you are only using trustworthy and credible websites and sources.

We provide an vertical gpu bracket buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available vertical gpu bracket currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of vertical gpu bracket has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an vertical gpu bracket?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your vertical gpu bracket.
Customer Ratings: Number ratings grade vertical gpu bracket objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their vertical gpu bracket.
Product Quality: You don’t always get what you pay for with an vertical gpu bracket, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an vertical gpu bracket is should be an indication of how long it will work out for you.

We always remember that maintaining vertical gpu bracket information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding vertical gpu bracket is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What kind of bracket do I need for a vertical GPU?

A: Specifications: PH-VGPUKT_02 is a universal GPU bracket from Phanteks. The kit includes the Vertical GPU bracket and a 220mm Flat-line PCI-E x16 Riser Cable. Showcase your graphic card by mounting it vertically with the PH-VGPUKT_02. This product is sold direct from the manufacturer.

Q: Can a vertical GPU be installed on a 3.0 motherboard?

A: This product is only compatible for devices that support the PCI-E 3.0 specification. If you use this product with a motherboard that supports PCI-E 4.0, please enter into BIOS option and select PCI-E 3.0 before installation., The Vertical GPU Holder Kit V2 can also accommodate 3-slots GPUs but allows installation of only 2 screws out of 3

Q: Why do you need a vertical graphics card holder?

A: The vertical graphics card holder Kit allows vertical installation of a GPU to better show off the visual design of the GPU and its cooler. The newly revised vertical graphics card holder kit fits all standard ATX chassis with at least 7 available PCI slots.

Q: How many PCI slots does a vertical GPU need?

A: Specifications: IMPORTANT NOTE: This vertical graphics card holder kit is designed for standard ATX chassis with at least 7 available PCI slots & You need to GIVE UP the access to these 7 PCI slots at the back panel of your chassis. You’re seeing this ad based on the product’s relevance to your search query.