The Best Vise Jaws of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Vise Jaws of 2023. Check our ranking below.

2,042 Reviews Scanned

Rank No. #1

WORKPRO 2-Pair Vise Jaw Pads, Magnetic Vice Jaw Covers Protectors, 5-1/2 inch Multi-Groove Jaw Pads and 6 inch Aluminum Pads Set

Two Pack: The set includes 6 inches soft standard pads and 5-1/2 inch multi-groove jaw pads. Works with most Bench Vises, Clamps, Drill Presses, Millers, and more.
Non-Marring: Aluminum Vise Jaws with drawer-type soft pads are designed to protect hard workpieces, and the tough multi-groove pads perform well in protecting soft workpieces.
Skid-proof Surface: The drawer pads have a waffle surface to hold round or hex parts and support flat parts well. The multi-groove provides 5 round grooves and 90° & 45° clamping angles.
Strong Magnets: Embedded magnets on the pads attract them to the vise tightly, keeping vise pads securely in place and holding the workpiece better.
Multi-Purpose: These vice jaw pad sets can be used on many types of vices and help protect surfaces of wood, metal, plastic, tubing or any other workpieces used on a vice.

Rank No. #2

FRICTIONWORKS Vise Jaws. Made In USA Pro Grade SH80 Hard Non-Scratch Polymer. 4 Inch Magnetic Bench Vise Covers. N48 Magnets. Fits 3 4 5 Inch Vises and Blocks Red

MADE IN USA - The bench vise jaw re-imagined from the ground up and built to a higher standard in the USA. New design innovations unique to Frictionworks non-marring soft jaws and a limited lifetime warranty.
SUPERIOR HOLD - 8 N48 spec Neodymium rare earth magnets force rated at 7 lbs each. We have tried other vice jaws and by far the strongest magnetic vise jaw pull force is with Frictionworks vise soft jaws. The only vice jaw covers with listed specs and the magnet strength you need to keep the protective jaws solidly on your table vise, jaw horse, drill press vise, swivel vise, vise clamps, or heavy duty bench vise.
EXCLUSIVE MAGNET RETENTION SYSTEM - The innovative internal bracket system in our soft jaws secures the magnets to the vise jaw caps with a stainless bolt and is then overmolded into the vice jaw pads, solving the biggest failure point of all soft jaw pads for metal vises leading to the toughest vise jaws made.
ENHANCED MATERIAL - Our proprietary fiber-reinforced polymer composite, shore hardness 80-D, provides an incredibly tough jaw face and works great and is recommended if you really want to clamp down hard. Use for gunsmithing, woodworking, jewelry working, , muzzle device installation, 80/20 Extrusions, plumbing, maching, as a golf club vise, and more. For low and mid-torque bench vise clamping applications see our SH60 grey medium density vise pads. low and
PROTECTIVE SURFACE – While incredibly tough, our 4" vise soft jaws specially textured surface won't mar, scratch or discolor delicate surfaces. Tested safe for clamping on cerakote, chrome, aluminum, wood, plastic, painted surfaces, and more.

Rank No. #3

HORUSDY Vise Jaws, 6" Magnetic Retention Vice Jaw Pads, Universal Vise Soft Jaws

2 PCS Bench Vise Jaw Grip Objects and Fits Most Vises
6x Magnets Add Stability
Waffle Grip Anti-Slip Adds More Grip Points
Thermoplastic Polyurethane (TPU) Material
Strong Embedded Magnets Keep Inserts Securely in Place

Rank No. #4

Vibrant Performance 20990 Billet Aluminum Vise Jaw

Vibrant
Included components: Billet Aluminum Vise Jaws
Package Dimensions: 13.462 L x 6.858 H x 18.541 W (centimeters)
Part Number: 20990

Rank No. #5

JCL Soft Vise Jaws | 4 inch vice jaws (2 pack), including 1 set grooved and 1 set flat | Use on any Metal Bench Vise to safely clamp flat, round or irregular shapes objects

Multipurpose Design: These soft vise jaws are the perfect tool to hold your workpiece firmly in place and protect it from your metal bench vise. Safely hold any round, flat or irregular metal, plastic or wood objects. Simply change between the grooved and flat vice jaw sets accordingly
Compatibility: Our vise jaws are compatible with a wide variety of tools including vise block, drill press vise, woodworking vise, brass hammer, clamps, bench vise and mill clamps. Add it to your collection of drill press accessories.
Protects Delicate Surfaces: Our soft jaws for bench vise are made from Thermoplastic polyurethane (TPU) rubber which is sturdy enough to hold your workpiece in place but won’t discolor or leave any marks on their delicate surface. These vise jaws are ideal for woodworking, gunsmithing, jewelry making, and more delicate type work.
Grooved or Flat Surface: Our 4 inch vise soft jaws feature a grooved surface specifically designed to keep round or irregularly shaped items securely in place and a flat surface specifically designed to protect and hold delicate flat or square objects.
4 Strong Magnets for East Attachment: Each vise pad set has 4 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise.

Rank No. #6

TRISENSE 6" Vise Jaws, Universal Soft Vice Jaws Pads Covers with Magnetic, Multi-Purpose Protector for Any Metal Vice, 1 Pair, Golden

【Performance】These 6" vise jaws, made of high-quality aluminum and rubber, can be used to firmly hold wood, metal, plastic, tubing, and threaded items to protect any product with a flat or round surface.
【Multi-purpose】The magnetic vice jaws are compatible with various mental vises, including bench vices, mill clamps, drill press vices, etc.
【Advantage】Eight embedded magnets (one pair) keep vice jaws in place securely without shifting during use. Different-color choices allow you to dedicate each vibrant jaw set for particular workshop tasks.
【Design】Aluminum soft jaws with a specially designed V-shaped surface and ledge can hold and protect round or hex parts and support flat parts while clamping, providing convenience in operation.
【Wide Application】Our vise jaw pads are great for holding wood, metal, and plastic, ideal for all kinds of shop, craft, jewelry, and gunsmithing projects.

Rank No. #7

NICECNC 10 Set 20pcs 6 x 2 x 1" Soft Jaws Set Standard Machinable Aluminum Compatible with Kurt 6" Vise Jaws

Jaw Type: 6" Kurt Type Standard Machinable Aluminum Soft Vise Jaws
Size: 6 x 2 x 1" (L x H x W)
Bolt Center Distance: 3.875"
Distance from Bottom: 0.940"
Screw Size: 1/2

Rank No. #8

Aluminum Alloy Rubber Soft Vise Jaws with Strong Magnet Blocks Sold with Extra Spare Pair Rubber (4Inch)

Aluminum Vise Jaws can use on any metal Vise for holding wood, metal, plastic, tubing, threaded items safely to protect any product flat or round.
3PCS Strong embedded magnets keep vice jaws in place securely
Special designed V-Shaped surface and ledge can hold and protect round or hex parts and support flat parts while clamping.
Drawer type pull-out design, the jaw aluminum alloy magnetic block adopts the pull-out design, and the rubber strip is installed, which is convenient and quick.
Great for holding wood, metal, plastic. Ideal for all kinds of shop, craft, jewelry.

SaleRank No. #9

JCL Vise Jaws - Nylon, Multipurpose 4" - Use on any Metal Vise, Magnetic Reversible Pads, Clamp Flat or Round Products

Multipurpose Design: These 4" nylon vise jaw pads are designed for you to use either the flat or grooved side to protect and hold your workpiece from your metal bench vise. Plus, our vise jaws feature a grooved surface specifically designed to keep round or irregularly shaped items securely in place.
Extra Compatible: Our nylon vise pads are compatible with a wide variety of tools including vise block, drill press vise, woodworking vise, brass hammer, clamps, bench vise and mill clamps. Add it to your collection of drill press accessories.
Protects Delicate Surfaces: Our bench vise jaw covers are made from durable nylon which is sturdy enough to hold your workpiece in place but won’t discolor or leave any marks on their delicate surface. These nylon vise pads are ideal for woodworking, gun-smithing, jewelry making, and more.
8 Strong Magnet for Easy Attachment: Each nylon vise pad set has 8 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise.

Rank No. #10

IRWIN Tools Record Replacement Jaw Plates and Screws for No. 3 Mechanic's Vise (T3D)

Use to replace worn parts on a Mechanics vise.
Jaws are made from hardened steel.
Jaw plates are fully machined on all load-bearing surfaces.
4-inch plates fit the #3 Mechanics Vise.

SaleRank No. #11

ATLIN Vise Jaws 6" - Nylon, Non Marring Soft Jaws - Multi-Purpose Design for Woodworking, Jewelry Making, Plumbing

Non-marring – The vise jaws are made from a tough, but soft nylon. ATLIN 6in vise jaw pads will never mar or damage any of your project materials
Easy Install – The soft jaws attach to your vise with 3 neodymium magnets; no screws or bolts needed
Grooved Design – The 6 inch vise inserts feature a multi-purpose design which is ideal for, woodworking, jewelry making, threaded items, pipe, tubing, AN fittings
Universal Compatibility – ATLIN vice jaws are compatible with any 6" milling vise, machine vise, drill press vise, bench vise
Sizing & Specs – vise jaws measure 6" in length, Groove sizes: 3/8" @ 60° angle | vertical grooves: 1/4", 1/8", 1/16" 5/8" | horizontal groove: 1/4" – See second photo for further details

Rank No. #12

S&F STEAD & FAST Vise Jaws Covers Protectors, Soft Jaws for Bench Vise 6", 2 pairs, Strongly Magnetic Vise Jaw Pads for Clamping Woodworking Metal Plastic…

6 inch bench vise jaw pads made with Thermoplastic Polyurethane (TPU), soft enough to protect surfaces from damage yet hard enough to hold items in place
11（8+3） strong rare earth magnets on soft vise jaws to attach vice jaws securely to bench vise; no worries about pad getting knocked off while switching workpieces
2 surfaces vice jaw pads: 1) waffle grip for wood, aluminum, copper. 2) multi-groove angle to hold cylindrical objects with diameter 2/5 1/8 1/7 1/12 2/3 inch vertically, horizontally or at 60°
Magnetic vise soft jaws for clamping workpiece firmly without marring when cutting, sawing, drilling, welding, grinding and polishing
Vice soft jaws are suitable for bench vises, drill press vises, clamps and clamp-on vises; use to grip wood, metal, plastics and tubing

Rank No. #13

BARTOO Aluminum 4" Vise Jaws Pads, Magnetic Reversible Pipe Vise, AN Fitting Vice Jaw Covers, Professional Grade Multi-Purpose Vise Jaw Protective Inserts for Any Metal Bench Vice (4", Black)

Multipurpose Design: These 4" Aluminum vise jaw pads are designed for you to use either the flat or grooved side to protect and hold your workpiece from your metal bench vise. The superior groove design of our magnetic vise jaws, gives you a firm grip on your workpiece, while protecting it from damage

SaleRank No. #14

SWANLAKE 4.5 Inch Vise Jaw Pads Covers Protectors 1 Multi-Grooved & 1 Standard Set

These soft jaws for bench vise are made of Thermoplastic polyurethane rubber which is sturdy enough to hold your workpiece firmly in place and protect it from your metal bench vise.
Each vise pad set has 4 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise.
This 2 pack set with both standard & multi-groove jaw pads 4.5" will work with a 4 inch to 5 inch bench vise.
This vise jaw covers feature groove sizes: 90 Degree angles: 1/16", 1/8", 1/4", 3/4". 60 Degree angle: 13/32".
These vise jaws are ideal for woodworking, jewelry making, and more delicate type work.

Rank No. #15

Housolution 5 Inch Magnetic Vise Jaw Pads Covers, 1 Pair Retention Vice Jaw Pads Universal Jaw Covers with Multiple Angle Grooves Design, Vice Soft Jaws for Woodworking, Jewelry Making, Plumbing

🔩【Premium Material】: Made from high-quality rubber and thickened design, our vise jaws are strong and abrasive resistance; hard enough to hold items in place, also soft enough to protect finished, anodized or delicate surfaces from damage; can be used for a long time.
🔩【Strong Magnet for Easy Attachment】: Strong embedded magnets help to keep vise jaw pads securely in place. Easy to install, no screws or bolts required.
🔩【Multi-Angle Grooves Design】: Multi-groove design provides a number of holding slots to keep items in place and better grip performance. Three kinds of angle for clamping items: 60 degree angle, horizontal angle, vertical angle. Diameter of other slots: 0.35inch/9mm; 0.11inch/3mm; 0.23inch/6mm; 0.07inch/2mm; 0.66inch/17mm; 0.19inch/5mm. Please refer to the picture for details.
🔩【Wide Applications】: Can be used on any metal vise for holding steel, aluminum, copper, woodwork, metal, plastic, tubing, threaded items, safely protecting any flat or round product. Use in gunsmithing, woodworking, jewelry making, cutting conduit, drilling, gluing, metalworking, sanding or planing, sawing, and fitting operations.
🔩【Universal Vise Jaw Covers】: Our soft jaws are highly compatible with a wide variety of vises, tools, including vise block, drill press vise, brass hammer, clamps, bench vise, mill clamps, etc. Add it to your drill press accessories to save time and effort. The product includes one set of vise jaw pads (2 pads)

SaleRank No. #16

Olympia Tools 38-695 2 Pack Magnetic Vise Jaw

VISE JAWS: Includes two sets of jaws: one set of anodized aluminum jaws for scratch-free aluminum pieces; two nylon jaws for damage-free assembly. Each set features a magnetic back and easy-grip faces.
HIGH QUALITY: Durable and long-lasting, these vise jaws feature easy-grip faces and magnetic backs. An essential tool for your shop or workbench.
MADE TO LAST: Our durable and long-lasting tools help you with home, garage & industrial projects. With professional-grade quality, easily repair & fix issues with our tool cabinet essentials.
THE RIGHT TOOL FOR THE JOB: We engineer a range of bolt cutters, clamps, chisels, folding carts, hammers, pliers, saws, screwdrivers, tape measures, utility knives, vises, bolt cutters, saws & wrenches.
SUPERIOR INSTRUMENTS: Olympia Tools provides quality & innovative hand & specialty tools, tool accessories & outdoor equipment for construction, woodworking, mechanical maintenance & home repair.

Rank No. #17

Entemah Vise Soft Jaws Multi-Purpose, 5.5 Inches Vise Jaws Nylon Vise Block with Non Marring Magnetic Soft Jaws

Premium Material: Made of high-quality TPU, it can hold things in place and protect delicate surfaces from damage.
Easy Installation: Vise jaws are magnetic to fit securely on your bench vise, no screwing or bolting required.
Compatibility: Compatible with almost any bench vise, clamp, mechanical vise, drill press vise, drill press, miller, material clamp, etc.
Wide Usage: The vise block can be used to hold gunsmithing, plumbing, soldering, woodworking, metal working, jewelry making, automotive, pipe, arts and crafts, etc.
Buy with Confidence: We sincerely thank you for choosing our products, choosing our products will not disappoint you. If you have any questions, please contact us in time, we will help you solve them as soon as possible.

Rank No. #18

Yost Vises SA-340 4" Aluminum Vise Jaw Caps (1 Pair)

Jaw caps attach to and cover a set of 4"-wide serrated vise jaws to shield delicate work from damage
Aluminum provides durability, and the polished finish creates a smooth surface to prevent the clamped item from being marred
Pliable tangs fold over the serrated vise jaw to hold the cap in place
Meets Fed. Spec. GGG-C-00137B

Rank No. #19

Vise Jaw Pads, Vise Soft Jaws with Magnetic,6 Inch Universal Vise/Vice Jaws and 6 inch Multi-Groove Vice Jaw Pad sets

【2 Set】 6 Inch Aluminum Universal Vise Jaw Pads and 6 inch Multi-Groove Vice Jaw Pads.
【Strong Magnets】The vise jaw pad is equipped with a magnet, which is easy to use and can firmly adhere to various vises without falling off easily.
【Wide range of use】Safely hold any wood, metal, plastic, pipes, etc., without scratching the surface of the item, providing excellent protection.
【Suitable for various vise】The vise jaw pads can be used in Drill press vise/Table vise/Bench vise/Woodworking vise/Milling Vise/etc.
【The best service】If you are not satisfied with the products, you can contact us at any time, we will give you a satisfactory solution.

SaleRank No. #20

JCL Vise Jaws - Nylon, Multipurpose 6" - Use on any Metal Vise, Magnetic Reversible Pads, Clamp Flat or Round Products

Multipurpose Design: These 6" nylon vise jaw pads are designed for you to use either the flat or grooved side to protect and hold your workpiece from your metal bench vise. Plus, our vise jaws feature a grooved surface specifically designed to keep round or irregularly shaped items securely in place.
Extra Compatible: Our nylon vise pads are compatible with a wide variety of tools including vise block, drill press vise, woodworking vise, brass hammer, clamps, bench vise and mill clamps. Add it to your collection of drill press accessories.
Protects Delicate Surfaces: Our bench vise jaw covers are made from durable nylon which is sturdy enough to hold your workpiece in place but won’t discolor or leave any marks on their delicate surface. These nylon vise pads are ideal for woodworking, gun-smithing, jewelry making, and more.
8 Strong Magnet for Easy Attachment: Each nylon vise pad set has 8 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise.

Last update on 2023-07-29 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Vise Jaws?

Do you get stressed out thinking about shopping for a great Vise Jaws? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Vise Jaws, which is why we have assembled a comprehensive list of the greatest Vise Jaws available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Vise Jaws that you consider buying. Your questions might include the following:

Is it worth buying an Vise Jaws?
What benefits are there with buying an Vise Jaws?
What factors deserve consideration when shopping for an effective Vise Jaws?
Why is it crucial to invest in any Vise Jaws, much less the best one?
Which Vise Jaws are good in the current market?
Where can you find information like this about Vise Jaws?

We’re convinced that you likely have far more questions than just these regarding Vise Jaws, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Vise Jaws, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Vise Jaws. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Vise Jaws buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Vise Jaws currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Vise Jaws has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Vise Jaws?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Vise Jaws.
Customer Ratings: Number ratings grade Vise Jaws objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Vise Jaws.
Product Quality: You don’t always get what you pay for with an Vise Jaws, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Vise Jaws is should be an indication of how long it will work out for you.

We always remember that maintaining Vise Jaws information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Vise Jaws is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

The Best Vise Jaws of 2023 – Reviewed and Top Rated

How Do You Buy The Best Vise Jaws?

Related Post: