20 Best Where Is The Trunk Release On A 2016 Chevy Malibu of 2023 – Romance University
After hours researching and comparing all models on the market, Romance University finds out the Best Where Is The Trunk Release On A 2016 Chevy Malibu of 2023. Check our ranking below.
2,047 Reviews Scanned
- Fits : Chevy Malibu 2013-18, Chevy Cruze 2011-19, Chevy Impala 2014-19, Chevy Sonic 2012-19, Chevy Camaro 2010-19, Buick Regal 2011-19, Buick LaCrosse 2010-18, Cadillac ATS 2013-19, Cadillac CTS 2011-19 - Fit Rear Tailgate Door& more.Please see the below for full vehicle list.
- Replaces number: 940-108, 13501988, 545255965, 99905279
- Please refer to the listing pictures for an accurate description of the parts included in the kit.
- 1 year warranty
- IMPORTANT NOTE - Please check the description or use the year/make/model drop down bar and interchangeable part numbers to confirm the compatibility before purchasing. If you don't make sure whether this Power Door Lock fit for your vehicles, please message us
- This HY-SPEED Trunk Latch Actuator is fit for Cadillac . OE#: 13501988 557795741 545255965 687996079 940-108 940108
- Fit For 2010 Allure | 2016-2019 Cascada| 2010-2018 LaCrosse| 2011-2017 Regal| 2018-2019 Regal Sportback| 2018-2019 Regal TourX| 2012-2017 Verano
- Fit For 2013-2019 Cadillac ATS | 2011-2014 Cadillac CTS Coupee | 2015-2019 Cadillac CTS | 2014-2016 Cadillac ELR | 2013-2019 Cadillac XTS | 2010-2019 Camaroe | 2014-2015 Corvette Convertible
- Fit For 2011-2019 Cruze | 2016 Cruze Limited | 2014-2019 Impala | 2013-2018 Malibu | 2016 Malibu Limited | 2012-2019 Sonic Sedan
- ▲IMPORTANCE▲ Please use the year/make/model as we wirte in the following Product description before purchasing. Warranty:12 months Feel free to contact us if any problem.
- [High quality material]: Bumper Quick Release is made of high quality aluminum metal with good stability, hardness and strength of bumper fasteners; O-ring is made of high quality rubber material with good heat resistance and wear resistance and long service life.
- [Quick Release]: 1. Mark the location where you want to install the quick bumper release kit and Drill the holes. 2. Install the aluminum quick release tabs. Place the washer on the other side of the bumper/fender. (Tighten using the hex tool and a wrench) 3. Considering the elasticity of the rubber, the spacing can be slightly shortened to achieve a tight symmetrical effect, even in a crossed fashion.
- [Scope of Application]: Quick Release Fastener Kit is suitable for front bumper, rear bumper, trunk lid, hatch cover, etc. Excellent hardness and strength make you feel more at ease in use, and aluminum alloy quick release bumper fasteners ensure stability in use.
- [Package includes]: 4 bumper quick release pieces, 4 bolts, 4 nuts, 4 gaskets, 2 rubber O-rings fasteners.
- [About us]: We strive to constantly innovate to meet our customers' needs, provide them with better products and create a perfect product experience. Our goal is to serve every detail and bring convenience to every family.
- [Vehicle Fitment-1]: Compatible with Buick Cascada 2016-2019, Regal Sportback/Regal TourX 2018-2019, LaCrosse 2010-2018, Regal 2011-2017, Verano 2012-2017, Allure 2010; Compatible with Cadillac ATS 2013-2019, CTS 2011-2019, XTS 2013-2019, ELR 2014-2016
- [Vehicle Fitment-2]: Compatible with Chevrolet Camaro 2010-2019, Cruze 2011-2019, Impala 2014-2019, Sonic 2012-2019, Cruze 2017-2019, Malibu 2013-2018, Cruze Limited/Malibu Limited 2016, Corvette 2014-2015
- [Reference Number]: 940-108, 940108, 13501988 557795741 545255965 687996079, 99905279---Please enter your vehicle information in the top left corner of listing and check our "Special Note" before ordering
- [Location]: Trunk Side; This Trunk latch actuator comes with 4-Pin Connector
- [Customer Support]: 1 Year Unlimited-mileage Quality Guarantee. This trunk latch is ideal replacement to solve your problems such as door opening and closing failure and door lock rattling. We extremely value your satisfaction and strive to provide you with a good shopping experience. Any further question, please feel free to contact us at any time
- Fit for select 2010-2019 modles. Part Number:940-108 13501988
- Fit for 2010-2019 Camaro, 2014-2015 Corvette Convertible, 2011-2019 Cruze, 2016-2016 Cruze Limited, 2014-2019 Impala, 2013-2018 Malibu, 2016-2016 Malibu Limited, 2012-2019 Sonic Sedan.
- Fit for 2010-2010 Allure, 2016-2019 Cascada, 2010-2018 LaCrosse, 2011-2017 Regal, 2018-2019 Regal Sportback, 2018-2019 Regal TourX, 2012-2017 Verano, 2013-2019 ATS, 2011-2014 CTS Coupe, 2015-2019 CTS, 2014-2016 ELR, 2013-2019 XTS wo/RPO Code B9Q (Hearse Package).
- High Quality, 12 Months Warranty, Welcome to Contact Us if Any Problems.Please confirm the year and model of your car before buying.
- YHTAUTO Affordable and Prime Power Door Latch Lock Actuator Motor, Directly Fit
- Trunk Lid Latch Lock Actuator Motor Replacement for Chevrolet Camaro 2010-2019 Cruze 2011-2019 Impala 2014-2019 Sonic 2012-2019 Cruze 2017-2019 Malibu 2013-2018 Corvette 2014-2015
- Trunk Latch Lock Actuator Replacement for Cadillac ATS/XTS 2013-2019 CTS 2011-2019 ELR 2014-2016 Trunk Latch Actuator Buick LaCrosse 2010-2018 Regal 2011-2017 Verano 2012-2017 Cascada 2016-2019
- Location: Trunk; Height: 5.10 Inches; Length: 7 Inches
- Reference Number: 13501988, 940-108, 545255965, 99905279
- Function: The Bumper Quick Release Fasteners allow easy and quick removal of the bumper or luggage compartment. It is applicable to all kinds of vehicles and can even work in other ways.
- Compatible: Applicable to all vehicles, including front bumper, rear bumper, trunk, hatch cover, etc. This kit can help you solve the problem of fixing the bumper again after it falls off.
- Package Includes: 4 x Quick release tabs; 4 x Stainless steel bolts; 4 x Nuts; 4 x Washers; 2x O Rings
- Need to attach and detach your bumper quickly? Quick release fasteners are great for front bumpers, rear bumpers, and hatch lids that need to be frequently removed. They are perfect for people who go to the pits often and are not difficult to install.
- First, mark where you will install the quick bumper release kit. Then, Drill the holes. After, Install the aluminum knot. Put the washer on the other side of the bumper/fender. You will need a hex tool as well as a wrench to fasten everything together. Afterwards, mount it back with the rubber band. You can either put the rubber band in the normal way or even a cross with the same result.
- Need to attach and detach your bumper quickly? Quick release fasteners are great for front bumpers, rear bumpers, and hatch lids that need to be frequently removed. They are perfect for people who go to the pits often and are not difficult to install.
- Package Includes: 4 x Quick release tabs; 4 x Stainless steel bolts; 4 x Nuts; 4 x Washers; 2x O-Rings.
- First, mark where you will install the quick bumper release kit.Then,Drill the holes.After,Install the aluminum knot.Put the washer on the other side of the bumper/fender. You will need a hex tool as well as a wrench to fasten everything together.Afterwards, mount it back with the rubber band.You can either put the rubber band in the normal way or even a cross with the same result.
- This is a great mod for people who are always at the pits. As you can see, the installation does not take too long to install, and the drilling is completely worth it for the fresh new look. Enjoy your quick bumper release fasteners!
- 100% SATISFACTION -When you receive the goods, if there are any problem, please contact us and do not directly open the dispute. We promise we will give you a satisfied solution after we confirmed it. We also will give you a positive evaluation.
- 【Replace OE number】13501988, 940-108, 940108, 13501988 557795741 545255965 687996079, 99905279
- 【installation site】Trunk Side; This Trunk latch actuator comes with 4-Pin Connector
- 【Applicable models】Buick Cascada 2016-2019, Regal Sportback/Regal TourX 2018-2019, LaCrosse 2010-2018, Regal 2011-2017, Verano 2012-2017, Allure 2010; Cadillac ATS 2013-2019, CTS 2011-2019, XTS 2013-2019, ELR 2014-2016; Chevrolet Camaro 2010-2019, Cruze 2011-2019, Impala 2014-2019, Sonic 2012-2019, Cruze 2017-2019, Malibu 2013-2018, Cruze Limited/Malibu Limited 2016, Corvette 2014-2015
- 【Perfect Replacement】This high-quality replacement part is a perfect match for your original car. It is constructed from top-notch materials, ensuring excellent durability for long-term use. The sealed connections effectively prevent environmental corrosion and potential performance issues
- 【Special Attention】 Before purchase, confirm fitment by entering your make, model, and year in the garage tool. This product is a perfect match for your car's original part
- Good quality: made from Black nylon, more durable that would not break or crack easily. Small Things but great use, satisfy your demands
- High precision: can hold your parts very tightly, won't be loose as the time passing by, also can be easily removed without causing damage
- OEM REPLACEMENT - #90467-07201 for engine splash shield, undertrays, chasis covers or heating box
- Universal plastic clips: be widely used for door trim, radiator shield yoke, fender, bumper, grille and splash shield retainer replacement.FITS SELECTED TOYOTA & LEXUS MODELS
- Package include:40PCS nylon fastener rivet clips
- [4 WAY BATTERY TERMINAL] Made of high-quality brass and steel material which is corrosion resistant with excellent electrical conductivity that can reduce voltage distortion and transmission loss. And it has 4 ports for multiple cable connections, wiring is easy and convenient to modify.
- [POSITIVE & NEGATIVE LABELED] Positive and Negative is clearly labeled on the battery terminal connectors that you can easily recognize.
- [WIDELY USE] Our battery terminal connectors are compatible with cars, vans, caravan, tachts, trucks, pickups, buses, etc. Works on round post auto batteries SAE/JIS Type A posts. Please be sure to connect correct terminal to correct polarity.
- [EASY TO USE] Equipped with a hex wrench which can help you to complete installation more convenient and easier. And it only takes a minute to clean, use the terminal cleaning brush that we provided to clean dirt, debris and corrosion. The products included can fully meet your need.
- [WHAT YOU RECEIVE] Package contains 2 battery terminal connectors (positive and negative), 4 insulation sleeves, 2 battery terminal cleaning brushes, 2 battery anti-corrosion washers and a hex wrench. Please feel free to let us know if you have any concerns or questions about our products, our customer service team is always here to satisfy all of you!
- PROTECTS AGAINST STAINS – These are the perfect seat covers for your new car, or even a car that’s just new-to-you. Our car seat covers provide protection against spills and stains that might occur inside of your vehicle.
- BREATHABLE MATERIALS – We use specially selected materials for maximum comfort during your daily commute. The high-quality poly outer layer provides enhanced ventilation so that you stay cool and comfortable during your drive.Machine Washable Polyester Cloth with Foam Backing
- STYLISH DESIGN – Refresh the look of your vehicle and turn some heads along the way. This full set of seat covers features a stylish two-tone design with stitched accents, making it easy to add a splash of color to your interior.
- EASY TO INSTALL – The best investment for your new vehicle might also be the quickest. Follow our simple 3-step installation process to install the front seat covers before finishing off with the rear bench seat cover and headrest covers.
- UNIVERSAL FIT – Our seat covers are designed to fit most vehicles including cars, trucks, vans and SUVs. Please see our product images for fitment examples. Some additional work may be required to create a ‘perfect’ fit.
- 【Good Vinyl Material】These mountain stickers will not fade in the sun, will not fall easily, and will not leave glue on the car body when torn off.
- 【Easy to Install】Just clean the part to be pasted before pasting the product, then gently scrape it with the delivered small scraper, and then slowly tear off the film.
- 【Novel and Beautiful】It is very suitable to stick the logo on the trunk, side or window of your car to decorate your car. It will look very novel and beautiful.
- 【Outstanding Quality】Super adhesive does not need to worry about being irradiated by strong sun, the adhesive will not stick or be hit by rain.
- 【Note】Clean the parts of the car body where the product needs to be pasted. Don't hurry to tear off the film. First adjust the product to a satisfactory position and then tear the film with a scraper.( Prevent tearing invalid)
- For Buick Allure 2010; Cascada 2016-2019; LaCrosse 2010-2018; Regal 2011-2019; Verano 2012-2017
- For Cadillac ATS,XTS 2013-2019; CTS 2011-2019; ELR 2014-2016
- For Chevrolet Camaro 2010-2019; Corvette 2014- 2015; Cruze 2011-2019; Impala 2014-2019; Malibu 2013-2018; Sonic 2012-2019
- 4 in 1 DIY Toggle Switch Panel: Dual USB Socket + Voltmeter + 12V Outlet + ON/OFF Toggle Switch. It’s convenient for installing and operating. Also detachable to replace other charger sockets or anything else that fits.
- Real Time LED Voltmeter: The LED voltmeter shows accurate voltage status, reminds you whether the voltage is at a normal level, more secure for driving. Also allows quick and easy usage in the darkness. Your charging needs.
- SAFETY: The wires was built-in 10A Fuse for over-load protection. It can charge safely, without risk of overheating or damaging devices.
- Multifunctional product with LED indicator light, perfect for travel use. Fits for 12-24V Cars, Trucks, Marine Boats, ATV, RV, etc. The USB socket with dual output 5V/2. 1A, 5V/2. 1A charging port
- Package includes: 4 in 1 Toggle Switch Panel, 3 packs of connecting wires, 9 insulated terminals, 4 Mounting Screws, 1 Wiring Diagram. 2 Year Warranty by Nilight.
- Brilliant Illumination: T10 194 168 LED bulbs produce plenty of pure RED light to improve illumination while adding a modern touch to your vehicle's lighting.
- Fit Size: 194, T10, 168, W5W, 147, 152, 158, 159, 161, 175, 184, 192, 193, 2825, 12961, etc. Use on License Plate Light, Interior Door Light, Parking Light, Trunk Cargo Light, Stepwell Light, Dome Map Light.
- Perfect Fit: From interior lighting to license plate and marker lights, the T10/194 fitment is easily one of the most common sizes used on your cars.
- Attention: For Jeep Renegade Cherokee, for Volkswagen GTI Tiguan, Jetta, Passat and some for Mercedes-Benz CANBUS still can't prevent error message, we don't recommend you use them on the license plate light and parking light. For Nissan 300ZX 1993~1994 and for Hyundai ioniq LIMITED 2019, we don’t recommend you use them on map light.
- Warranty: 1-year hassle free warranty. Warranty does NOT cover labor, diagnostics, towing, rental car, or any other expense related to an item being defective/damaged.
- Fit for Chevrolet Malibu 2013-2017.
- OE Number: 13513995
- Good Replacement - to replace your broken tailgate lock actuator. Made of plastic and metal material, will easily restore your vehicles' tailgate door problem. Placement on Vehicle: Rear Liftgate Door
- Quick Installation - Easy to install and replace the broken trunk door lock actuator motor , no special tools needed.
- Package Includes:1 pc Trunk Door Lock Actuator Motor
- ✔【High Quality】Car Windshield Cover the Aluminum foil film on the surface can resistant to high temperature block snow damage;The second layer PP cotton can be well isolated from snow and wind;Fine Composite Cotton can not only be fireproof but also prevent cold air frosting on the glass;The innermost is the soft black non-woven, which soft enough can reduce friction with the car.
- ✔【All Seasons&Weather】The Car Windshield Snow Protection suitable for any season: protect against animal damage in spring, protect against sunlight and ultraviolet rays in summer, protect against scratches on branches and fruits in autumn, and protect against snow/ice/frost in winter.
- ✔【Fit for Universal Cars】Excluding wings: 62"x 49" sized car windshield snow cover is suitable for 99% vehicles, the best size for standard cars and crvs,suv, rvs, truck, van, etc.you can easily fold the snow covers for storage in your trunk or in rear seats of your vehicle. extra wiper protection- our windshield snow cover extended longer to protect the windscreen wiper. it can prevent the wiper from damage by being crushed and frozen in winter or aging in summer.
- ✔【Windproof Design&Easy to Install and Remove】With magnets & elastic edge & two wings design and mirror cover, the windshield cover can snugly fit your car and not easy to be blown away.two small wings with which you can pinch it in the door, which makes sense especially in a strong wind and anti-theft. soft opaque fabric lining of this magnetic windshield cover will protect your screen from scratching-easy to install and elastic design helps to resist tensile strength.
- ✔【Anti Theft Design】There are 4 elastic heavy-duty straps on our snow cover, 2 straps are made for side mirror and 2 straps with hooks for the wheels.Side panels close inside the car can prevent this snow cover from being stolen or being blown away by strong wind, which can make sure it stay in place firmer.
- Self-Stripping electrical tap connectors - Nilight self-stripping electrical t-tap connectors makes tapping into an existing wire a quick and easy job
- Versatile kit - 60 piece T-Tap Wire Connectors plus 60 piece; Male Quick Disconnects will last for numerous wiring projects. Marine, automotive, scientific, home wiring projects - you name it
- Thick tinned copper contacts - Thicker tinned copper contacts provide maximum conductivity and prevents the wire from shorting out efficiently
- Quality t-tap connector housing - Quick splice T-Tap connectors will securely lock on the wire. Plastic housing will not open after it has been snapped on the wire
- Perfectly fitting male quick disconnects - Nylon male disconnects have been designed to lock tightly on the T-Tap connectors to prevent sliding out
- Package Includes: (Pack of 2) 912/921 led bulb reverse light, 6W per bulb, 12-16V Wide voltage, 500Ma current, bulb size 1.57in(L)*0.59in(W)*0.35in(H), net weight: 6g/pc
- 300% Brighter: Each 921 led bulb has 15 pieces high power 2835-SMD LEDs, 3 times brighter than original reverse light bulbs. 6000k white color light brings your car a refreshed new look
- CANBUS Error Free: Built-in intelligent IC driver for better performance. Energy-saving, low temperature, long lasting. Comparable size with stock 921 bulbs, easy to install
- Suit for Socket: T15, 912, 921, 906, 904, 902, 922, W16W, just plug and play without modification. ONLY used for backup reverse lights
- Note: Amazon filter system may not be 100% accurate, the bulb size may vary between trim of your vehicle. Please double check owners manual or original bulb size to confirm
Last update on 2023-09-09 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Where Is The Trunk Release On A 2016 Chevy Malibu?
Do you get stressed out thinking about shopping for a great Where Is The Trunk Release On A 2016 Chevy Malibu? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Where Is The Trunk Release On A 2016 Chevy Malibu, which is why we have assembled a comprehensive list of the greatest Where Is The Trunk Release On A 2016 Chevy Malibu available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Where Is The Trunk Release On A 2016 Chevy Malibu that you consider buying. Your questions might include the following:
- Is it worth buying an Where Is The Trunk Release On A 2016 Chevy Malibu?
- What benefits are there with buying an Where Is The Trunk Release On A 2016 Chevy Malibu?
- What factors deserve consideration when shopping for an effective Where Is The Trunk Release On A 2016 Chevy Malibu?
- Why is it crucial to invest in any Where Is The Trunk Release On A 2016 Chevy Malibu, much less the best one?
- Which Where Is The Trunk Release On A 2016 Chevy Malibu are good in the current market?
- Where can you find information like this about Where Is The Trunk Release On A 2016 Chevy Malibu?
We’re convinced that you likely have far more questions than just these regarding Where Is The Trunk Release On A 2016 Chevy Malibu, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Where Is The Trunk Release On A 2016 Chevy Malibu, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Where Is The Trunk Release On A 2016 Chevy Malibu. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides an Where Is The Trunk Release On A 2016 Chevy Malibu buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Where Is The Trunk Release On A 2016 Chevy Malibu currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Where Is The Trunk Release On A 2016 Chevy Malibu has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Where Is The Trunk Release On A 2016 Chevy Malibu?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Where Is The Trunk Release On A 2016 Chevy Malibu.
- Customer Ratings: Number ratings grade Where Is The Trunk Release On A 2016 Chevy Malibu objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Where Is The Trunk Release On A 2016 Chevy Malibu.
- Product Quality: You don’t always get what you pay for with an Where Is The Trunk Release On A 2016 Chevy Malibu, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Where Is The Trunk Release On A 2016 Chevy Malibu is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining Where Is The Trunk Release On A 2016 Chevy Malibu information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Where Is The Trunk Release On A 2016 Chevy Malibu is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
Related Post:
- Where Is The Trunk Release On A 2016 Chevy Malibu
- Trunk Release 2018 Malibu
- 2016 Chevy Malibu Gas Release
- 2015 Chevy Cruze Trunk Release Button
- Where Is The Trunk Release On A 2013 Chevy Cruze
- Where Is The Trunk Release On A 2013 Chevy Cruze
- Chevy Cruze Trunk Release Button
- Chevy Cruze Trunk Release Button
- 2006 Chevy Malibu Trunk Torsion Bar
- 2006 Chevy Malibu Trunk Torsion Bar