Contents

The Best Wick Solder of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Wick Solder of 2023. Check our ranking below.

2,196 Reviews Scanned

SaleRank No. #1

Lesnow solder wick braid 10ft Length Desoldering Wick Braid Remover Tool Solder Sucker 1 piece No-Clean soldering Wick Wire Roll and Disassemble Electrical Components

🌟The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
🌟1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs
🌟This desoldering wick has geometrically-precise weave with copper, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
🌟The desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
🌟The braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work

Rank No. #2

Herain No-Clean Solder Wick, Desoldering Braided Wicks, Desoldering Wicks Removal Tool Solder Sucker, Desoldering Wick Used to Remove the Solder and Disassemble Electrical Components

1.High-quality materials: The solder wick is geometrically precisely braided with high-quality copper wire, which is resistant to oxidation and corrosion, has good thermal conductivity, low residual and no halide, and clean tin absorption.
2.Geometric braid design: The desoldering wick adopts a precise geometric braid design, which ensures a large surface tension and tin absorption ability, and reduces the risk of thermal damage to the circuit board.
3.Widely used: No-clean solder braid is suitable for welding work in laboratories, industries, schools and homes, It is suitable for all kinds of electronics, electrical appliances, precision instruments and meters. It can absorb tin quickly and a large amount of tin, and is dedicated to remove excess solder.
4.Easy to use: Desoldering braid is used to absorb excess solder when removing tin, the fine woven design promotes strong capillary action to suck in excess solder. The main board desoldering spot is removed, and it is used with the soldering station.
5.Ingenuity quality: 1 piece of no-clean solder braided wicks (0.078 inch wide, 9.84 ft length), which is sufficient to meet your work requirements. If you have any product questions, you can contact us at any time.

Rank No. #3

TOWOT Solder Wick Braid with Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder Soldering 2.5mm W 0.10'' L 5'

Quality materials：The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.
Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.
Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.
Warranty ：If you have any questions, please feel free to contact us at any time. Thank you!

Rank No. #4

NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue, 098" Width, 10' Length

Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
Available with standard or anti-static bobbins

Rank No. #5

TOWOT Solder Wick Braid With Flux No-Clean Electronic, Desoldering Wick Braid Remover.Desolder Soldering 2mm W 0.08'' L 9.8'

Quality materials：The Braided Desoldering Wicks are made of 100% copper wires with a fine braid design. Using flat stitch weaving, fast heat conduction, to promote strong capillary action to pull in excess solder.
Easy to use: the desoldering wicks can provide an easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
Extensive applications: the braided solder wicks are suitable for labs, school, home, and industrial welding work; And the wicks adopt a fine braid design to promote strong capillary action, bringing more convenience to your daily work.
Low residue design: No-Clean solder wick braid will just leave little residues after use and the residues are non-conductive and non-corrosive, no need to waste your time cleaning it.
Warranty ：If you have any questions, please feel free to contact us at any time. Thank you!

Rank No. #6

MG Chemicals 426 Desoldering Braid #4 Fine Braid Super Wick with RMA Flux, 5' Length x 0.1" Width, Blue

Oxide-free clean copper
Static free bobbins
Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
Manufactured under SPC guidelines
Designed to leave a residue that is environmentally safe

Rank No. #7

VIRALLOY No Clean Flux Solder Wick Braid Length 10ft Width 2.5mm Solder Copper Static Dissipative Bobbin Desoldering Wick Solder Remover Wick Desolder Electronic Components - Pack of 1

Are you looking for a flux wick and an effective and efficient way to remove solder from your circuit boards? Look no further than the VIRALLOY No Clean Solder Flux Desoldering Braid!
Made from pure copper wires woven together with a no-clean flux formula, this solder braid wick is designed to absorb and remove solder from your circuit boards quickly and easily
The ergonomic design of the solder flux remover desoldering wick ensures that it will leave little to no residue after use, and the residues that are left behind are non-conductive and halide-free
Plus, the flux for soldering copper soldering wick is easy to use - simply place it over the area where you want to remove the solder and heat it up
The solder tape will absorb the solder, leaving your circuit board clean and free of unwanted solder. So why wait? Get the VIRALLOY No Clean Desolder Wick today and make desoldering a breeze!

Rank No. #8

Hotop 6 Pieces Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 1.5 meter Length (Multi-color,1 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm)

What you get: come with 6 pieces of no-clean solder wicks in different size, including 0.04 inch, 0.05 inch, 0.07 inch, 0.1 inch, 0.12 inch, 0.14 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs
No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards
Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering

SaleRank No. #9

MG Chemicals - 453 Desoldering Braid #3 Fine Braid Super Wick with RMA Flux, 50' Length x 0.075" Width

Oxide-free clean copper
Static free bobbins
Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
Manufactured under SPC guidelines
Designed to leave a residue that is environmentally safe

Rank No. #10

Solder Wick Braid Copper Wire with flux 10 ft.(3M) Length X 2.5mm Width I Desoldering Wire I Solder Sucker I Solder Remover I Soldering Iron I Solder Braid for Circuit Board (1pcs)

✔️EXCELLENT QUALITY : Our No-clean Desoldering Wick Wire is made of Ultra-thin 100% pure braided copper. Free impurity and oxide-free desoldering wick that contains 2% RMA (Rosin Midly Activated) flux.
✔️ENOUGHT QUANTITY: The package includes high quality desoldering wick wire 10 ft(3M) long x 2.5 mm width, Twice as more as standard solder wicks. Its fine geometrical design makes the molten solder wicks away quickly and efficiently. Enough for your daily work needs.
✔️LOW RESIDUE : No-clean desoldering wick leaves halide-free, non-conductive, non corrosive environmental friendly residues, RoHs compliant. No need to clean surface after desoldering process.
✔️GREAT PROPERTIES: Design with strong capillary action resulting in increased absorption of solder excess. Less heat neccesary by its excellent thermal conductivity. Job done faster and efficiently without damaging circuit board sensitive pads, welding points or SMD components.
✔️SCOPE OF APPLICATION: For all kind of electronic circuit boards, replace faulty components, Clean joints and pads, remove excess solder, correct solder bridges, Clean excess solder from PCB during solder, desolder, rework or reflow process.

SaleRank No. #11

2Pack Solder Soldering Wire 60-40 Fine 0.6mm Reel Tin Lead Rosin Core + 2Pack Solder Wick No-Clean Desoldering Wick Braid + Soldering Rosin Flux Paste for Electronics Repairing DIY

【 Perfect Combo Accessories Kits for Solder Work 】----- 2 Packs Fine Tin Lead Rosin Core Solder Soldering Welding Iron Wire Reel with flux + 2 Packs Soldering wick sucker + 1 No-clean solder paste wax, widely use for Electronics devices Repair DIY Hobby Metalworking Welding
【 Alloy Parameters of the solder wire 】----- Tin 60%Sn / Lead 40%Pb, content 1.2% solder flux. Dia : 0.6mm, Weight : About 1.76oz/50garameters of the solder wire ----- Tin 60%Sn / Lead 40%Pb, content 1.2% solder flux
【 Low melting point Lead Solder Wire 374℉/190℃ 】----- High insulation resistance, flows well and heats evenly, reduced welding time; Good activity, stable performance, fast tinning; Forming a protective film on the surface of the solder joint after soldering, relieving solder joints Oxidation reaction, the solder joints are bright and firm
【 Feature of Solder Rosin Flux Paste 】----- No-clean solder paste with minimal residue and no cleaning required. Its boiling point is only slightly higher than the melting point of the solder wire. Has stable performance, non-toxic, non-irritating odor, safe and reliable use, Not corrosive to IC and PCB. Low volatility, long service life, high bonding strength, neutral pH value. It is an ideal auxiliary product for manufacturing high-quality electronic products
【 No-clean Copper Braid Desoder Wick 】----- Has excellent performance in desoldering tin, Anti-oxidation stability and anti-corrosion ability. This desoldering braid can quickly absorbed molten solder and left a clean working area for you, very convenient and helpful

Rank No. #12

SRA Soldering Wick with Flat Woven Copper Desoldering Braid Strip and No Clean Flux for Easy Damage-Free Solder Removal - 3 Pack 10 Foot Solder Wick Spool

10ft Super Sized Desolder Spools: 30 Feet of standard width .098" desoldering wick infused with no-clean flux for fast and efficient solder wicking action.
High Quality Materials: Impurity-free woven copper desolder braid construction with 3% no-clean flux provides superior conductivity, even at low temperatures.
Easy to Use: Simply place desolder wick over work and apply heat to remove solder from parts and terminals, break solder bridges, and correct other soldering mistakes.
Fast & Effective Wicking: Unique gap-weave coated solder wick braid absorbs solder quickly like a sponge, reducing the likelihood of overheating and lifted pads.
PCB Safe Residues: Desolder wick leaves little flux residue that is non-conductive and non-corrosive so it requires no cleaning. This product is also RoHs compliant.

Rank No. #13

NTE Electronics SW04-10 No-Clean Solder Wick with Anti-Static Bobbin, 4 Blue.098" Width, 10' Length, One Size

Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on type-r fluxes
Residue left behind is Halide free and non-conductive, so it does NOT have to be cleaned off the board
100 percent copper wick has fine braid design to promote strong capillary action to pull in excess solder
Available with standard or anti-static bobbins

Rank No. #14

MG Chemicals 454 Desoldering Braid #4 Fine Braid Super Wick with RMA Flux, 50' Length x 0.1" Width, Blue

Oxide-free clean copper
Static free bobbins
Only pure type 'RMA' rosin is used meeting the requirements of MIL-F-14256F (ANSI/J-STD-0004)
Manufactured under SPC guidelines
Designed to leave a residue that is environmentally safe

Rank No. #15

KOTTO Solder Wick Braid with Flux No-Clean Desoldering Wick Removal Tool, Solder Sucker Wick Roll to Desolder PCB and Remove Solder for Electronics, 5 ft Length, 0.1 inch Width, 2 Pack Wick

Quicker wicking: This Solder wick can be used to remove the unwanted excess solder quickly and efficiently during the solder re-working process or remove some already soldered components. The added Flux gives a faster action and helps the surfaces to be heated and solder to flow, which significantly reduces the solder repair time.
Copper braids: The braid desoldering wicks are made of 100% copper wires with fine braids woven together, and have good thermal conductivity. Also using the solder braid will protect the delicate components or electronic circuit boards from damages during soldering/reworking/repairing.
Wick Application: The desoldering braid wicks are suitable for industry welding, lab work or home work, practical desoldering tools to clean a joint from excess solder and correct mistakes on small PCB boards, the desoldered components can be used again, bringing lots of convenience for your work.
Easy to use: Simply just place the soldering wick against the solder and place heated solder iron tip on it, the soldering wick absorbs the solder due to its high thermal conductivity. By this way, you can remove the solder from the PCB or any metal surface. Leaves slight flux residue that is non-conductive and non-corrosive so it requires no cleaning.
Packages include 2 pcs of no-clean solder wicks, each wick is 5 ft in length and 0.1 inch in width.

Rank No. #16

AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux - Desoldering Vacuum Pump Solder Removal Tool

High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size

SaleRank No. #17

TOWOT Solder Wick & Desoldering Pump, 6 PCS Different Desoldering Wick & Solder Sucker-Desoldering Vacuum Pump Solder Remover

Rank No. #18

Lesnow solder wick Braid With Flux 3mm/0.12" Width 10' Length, No-Clean Desoldering Wick Braid Remover tool, Soldering Wick Disassemble Electrical Components,copper desolder wick Braid

🌟The braided solder wicks are suitable for labs, home and industry welding work,can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
🌟This desoldering wick has geometrically-precise weave with copper wires with nice quality and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
🌟1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.12 inch in width, enough quantity and length for your daily needs
🌟If you are using the solder wick for the first time, it is recommended to use a multi-point flux to assist in cleaning，At the same time, in order to prevent burns, do not directly touch the solder core at close range during use.
🌟 If for any reason you are not 100% satisfied with lesnow solder cores, we support you with a full refund. If you have any questions about the use of the product or the product is damaged, please contact us and our engineers will solve the problem for you as soon as possible.

Rank No. #19

Solder Wick,Solder Wick Braid,Soldering Wick Braid,Desoldering Wick Braid Remover with Flux,Solder Wick Braid Remover(Width 2.5mm/0.10in,Length 5ft,1roll)

[Quantity and Size] Our solder core braid is 1.5m/5ft long and 2.5mm/0.1in wide high-quality soldered core wire.It adopts flat knitting,fast heat conduction,and contains flux.its fine geometric design allows the molten solder to be quickly and efficiently absorbed,which is enough to meet your daily work needs.
[Excellent Quality] Our degumming core wire is made of ultra-thin 100% pure copper braid.Once the solder core and solder are heated,the solder braid can quickly absorb the molten solder and leave a clean working area.
[Easy to Use] It has excellent thermal conductivity and requires less heat.Due to the short heating time,it can well protect the sensitive pads,solder joints or smd components of the circuit board from damage,and is a good helper for professional maintenance personnel.
[Wide Application] Our tin-absorbing core wire can be used for all types of electronic circuit boards.It can clean solder joints and pads on the circuit board,remove excess solder,and provide great convenience for efficient replacement of faulty electronic components.
[Thank You for Your Support] Thank you for your support of our products.Your satisfaction is our greatest encouragement; If you have any questions about this product,please feel free to contact us.

SaleRank No. #20

Chemtronics, 80-4-10, Desoldering Wick, 10 ft, 4, Copper, Rosin

Made in United States

Last update on 2023-08-19 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Wick Solder?

Do you get stressed out thinking about shopping for a great Wick Solder? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Wick Solder, which is why we have assembled a comprehensive list of the greatest Wick Solder available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Wick Solder that you consider buying. Your questions might include the following:

Is it worth buying an Wick Solder?
What benefits are there with buying an Wick Solder?
What factors deserve consideration when shopping for an effective Wick Solder?
Why is it crucial to invest in any Wick Solder, much less the best one?
Which Wick Solder are good in the current market?
Where can you find information like this about Wick Solder?

We’re convinced that you likely have far more questions than just these regarding Wick Solder, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Wick Solder, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Wick Solder. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Wick Solder buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Wick Solder currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Wick Solder has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Wick Solder?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Wick Solder.
Customer Ratings: Number ratings grade Wick Solder objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Wick Solder.
Product Quality: You don’t always get what you pay for with an Wick Solder, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Wick Solder is should be an indication of how long it will work out for you.

We always remember that maintaining Wick Solder information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Wick Solder is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: What do you use for a solder wick?

A: Desoldering wick, also commonly known as solder wick, desoldering braid, or solder wire, consists of copper wires which have been braided together. You can find it at any typical hardware store, and it usually comes in a coil. Desoldering wick is used to remove solder from printed circuit boards, solder joints, or other electrical components .

Q: What is a solder wick used for?

A: A soldering wick can be used to remove excess solder leftover after fusing components together with a soldering iron.

Q: How do you use solder wick?

A: To use soldering wick , a person places the copper braid over the unwanted solder and heats it with a soldering iron. After the heat draws the solder into the braid, the technician or engineer removes both the braid and the heat source simultaneously.

Q: What is a desoldering wick?

A: Desoldering braid, also known as desoldering wick or solder wick, is finely braided 18 to 42 AWG copper wire coated with rosin flux, usually supplied on a roll. The end of a length of braid is placed over the soldered connections of a component being removed.