Contents

The Best Xprog M Programmer of 2023 – Reviewed and Top Rated

After hours researching and comparing all models on the market, we find out the Best Xprog M Programmer of 2023. Check our ranking below.

2,822 Reviews Scanned

Rank No. #1

Car Diagnostic Tool, for XPROG‑M V6.5 ECU Programmer Tool with USB Dongle Safe Convenient ECU Chip Tuning Tool

Strong Compatibility: Support a variety of programming adapters, such as ADP?0001 TMS370 PLCC28, ADP?0002 TMS370 PLCC44, ADP?0004 for Motorola HC05B/X PLCC52, etc.
Multiple Authorization: Support AUTH?0001 for Motorola HC05 family authorization, AUTH?0004 for Motorola HC12, 9S12 family authorization, AUTH?0005 for Texas Instruments TMS37 0/TMS374 family authorization.
Advantage: This ECU programming tool is the only version for XPROG?M that can decypte new version for CAS4. Including hard disk and USB Dongle, more convenient and secure.
Upgraded V6.50 Version: Professionally manufactured ECU chip programming tool, using the latest version of for XPROG?M V6.50, more powerful and stable than previous versions.
High Reliability: ECU chip tuning tool is made of metal material, exquisite and careful workmanship, strictly follows the factory quality control, dependable to use.

Rank No. #2

Aramox ECU Programming Tool, ABS Metal for XPROG?M V5.55 Car ECU Programmer Tool Kit with USB Dongle Auto Programming Tool for Windows 7

Compatibility: ECU programmer tool is suitable for XPROG -M V5.5.5 adapter: Support ADP 0001 TMS370 PLCC28 programming adapter; support ADP 0003 TMS370 PLCC68 programming adapter, etc.
Features: This ECU programming tool is the only version of Xprog -M, which can be removed for new versions for CAS4.
Main functions: Support Auth -0015 MPC5XX authorization, depending on the automatic detection of MPC5XX, M95XXX device type, flash, external flash memory and configuration memory size.
Strong security: USB encryption dogs and hard disks with ECU programming tool sets will make your programming more secure and protective software.
Products include: packaging includes a set of ECU programmer tools, including 18 different accessories.

Rank No. #3

ECU Programmer Tool Kit,XPROG M V5.55 Car ECU Programmer Tool with USB Dongle Auto Programming Tool for Windows 7

Advantage: This ECU programming tool is the only version for XPROG‑M that can decypte new version for CAS4. providing you great using experience.
Secure and Convenient: Comes with USB Dongle and hard disk of the ECU Programming tool set, which will make your programming more safe and protect software.
Various Authorization: Support AUTH‑0015 MPC5xx authorization, depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size.
Strong Compatibility: Has the authorization of various devices, supports a variety of programming adapters, meeting different demands.
For XPROG‑M V5.5.5 Adapters: Support ADP‑0001 TMS370 PLCC28 programming adapter; Support ADP‑0003 TMS370 PLCC68 programming adapter, etc.

Rank No. #4

ECU Programmer Tool Kit,XPROG M V5.55 Car ECU Programmer Tool with USB Dongle Auto Programming Tool for Windows 7

Various Authorization: Support AUTH‑0015 MPC5xx authorization, depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size.
For XPROG‑M V5.5.5 Adapters: Support ADP‑0001 TMS370 PLCC28 programming adapter; Support ADP‑0003 TMS370 PLCC68 programming adapter, etc.
Secure and Convenient: Comes with USB Dongle and hard disk of the ECU Programming tool set, which will make your programming more safe and protect software.
Strong Compatibility: Has the authorization of various devices, supports a variety of programming adapters, meeting different demands.
Advantage: This ECU programming tool is the only version for XPROG‑M that can decypte new version for CAS4. providing you great using experience.

Rank No. #5

Asukohu IC Adaptor Ews 4.3 4.4 Ic Adaptor Kit Reading Writing Data For R280 Plus, XPROG-M, AK90 & R270 Programmer Diagnostic Service Tools

The EWS 4.3 4.4 IC adapter does not need to solder any wires, no wire bonding, just read the data on the-board.
Made of durable plastic material, this adaptor requires no bonding wire and is compatible for xprog-m, ak90 & r270 programmer.
Ideal-for car repair enthusiasts and professionals who want to upgrade-their ews without any hassle.
Whether you're working in a garage or-at home, this adaptor is perfect for reading the 9s12(2l86d) on-board circuit with ease.
Take your car repair skills to the next level with this reliable and easy-to-use adaptor that will save you-time and effort!

Rank No. #6

DAUERHAFT ECU Programmer Tool Kit, Durable High Compatibility Metal for XPROG‑M ECU Programming Tool for Windows 7

Advantage: This ECU programming tool is the only version for XPROG‑M that can decypte new version for CAS4. providing you great using experience.
Secure and Convenient: Comes with USB Dongle and hard disk of the ECU Programming tool set, which will make your programming more safe and protect software.
Strong Compatibility: Has the authorization of various devices, supports a variety of programming adapters, meeting different demands.
Various Authorization: Support AUTH‑0015 MPC5xx authorization, depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size.
For XPROG‑M V5.5.5 Adapters: Support ADP‑0001 TMS370 PLCC28 programming adapter; Support ADP‑0003 TMS370 PLCC68 programming adapter, etc.

Rank No. #7

Auto Programmer Auto Diagnostic Tool For XPROG‑M V6.5 ECU Programmer Tool with USB Dongle Safe Convenient ECU Chip Tuning Tool

【Advantage】This ECU programming tool is the only version for XPROG‑M that can decypte new version for CAS4. Including hard disk and USB Dongle, more convenient and secure.
【Upgraded V6.50 Version】Professionally manufactured ECU chip programming tool, using the latest version of for XPROG‑M V6.50, more powerful and stable than previous versions.
【Multiple Authorization】Support AUTH‑0001 for HC05 family authorization, AUTH‑0004 for HC12, 9S12 family authorization, AUTH‑0005 for Texas TMS37 0/TMS374 family authorization.
【Strong Compatibility】Support a variety of programming adapters, such as ADP‑0001 TMS370 PLCC28, ADP‑0002 TMS370 PLCC44, ADP‑0004 for HC05B/X PLCC52, etc.
[High Reliability】ECU chip tuning tool is made of metal material, exquisite and careful workmanship, strictly follows the factory quality control, dependable to use.

Rank No. #8

ECU Programmer For XPROG‑M V5.55 Auto Diagnostic Tool with USB Dongle Auto Programming Tool for Windows 7 Support ADP‑0001 TMS370 PLCC28 ADP‑0003 TMS370 PLCC68 Programming Adapter

Advantage: This ECU programming tool is the only version for XPROG‑M that can decypte new version for CAS4. providing you great using experience.
Secure and Convenient: Comes with USB Dongle and hard disk of the ECU Programming tool set, which will make your programming more safe and protect software.
Strong Compatibility: Has the authorization of various devices, supports a variety of programming adapters, meeting different demands.
Various Authorization: Support AUTH‑0015 MPC5xx authorization, depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size.
For XPROG‑M V5.5.5 Adapters: Support ADP‑0001 TMS370 PLCC28 programming adapter; Support ADP‑0003 TMS370 PLCC68 programming adapter, etc.

Rank No. #9

Demeras ECU Programmer Tool Kit, for XPROG‑M ECU Programming Tool Functional Durable for XP

Advantage: This ECU programming tool is the only version for XPROG‑M that can decypte new version for CAS4. providing you great using experience.
Secure and Convenient: Comes with USB Dongle and hard disk of the ECU Programming tool set, which will make your programming more safe and protect software.
Strong Compatibility: Has the authorization of various devices, supports a variety of programming adapters, meeting different demands.
Various Authorization: Support AUTH‑0015 MPC5xx authorization, depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size.
For XPROG‑M V5.5.5 Adapters: Support ADP‑0001 TMS370 PLCC28 programming adapter; Support ADP‑0003 TMS370 PLCC68 programming adapter, etc.

Rank No. #10

Aoutecen ECU Programmer Tool Kit, English Stable Performance Functional Secure Metal for XPROG‑M V5.55 ECU Programming Tool High Compatibility for XP

Advantage: This ECU programming tool is the only version for XPROG‑M that can decypte new version for CAS4. providing you great using experience.
Secure and Convenient: Comes with USB Dongle and hard disk of the ECU Programming tool set, which will make your programming more safe and protect software.
Strong Compatibility: Has the authorization of various devices, supports a variety of programming adapters, meeting different demands.
Various Authorization: Support AUTH‑0015 MPC5xx authorization, depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size.
For XPROG‑M V5.5.5 Adapters: Support ADP‑0001 TMS370 PLCC28 programming adapter; Support ADP‑0003 TMS370 PLCC68 programming adapter, etc.

Rank No. #11

LAUNCH X431G XProG Key Programmer Immobilizer Professional Smart Tool Anti-Theft Remote Control Read and Write Transponder Key Data for X431 Series

LAUNCH X-431G X-ProG anti-theft key adapter is a anti-theft key adapter device used to read and write data of car key chip, clone and generate special keys.
X431G is suitable for the second, third, fourth and fifth generation anti-theft systems of V-A-G (for VW, for Audi, for Skoda, and for SEAT) models. X431G covers more than 90% of VAG models before 2018.
Needs to be used with X431 diagnostic scanners. Compatible with: X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII, X431 V, X431 V+, X431 PRO3S+, etc.
Supported anti-theft types: 35XX, CDC24C32, CDC24C32A3TTR8, CDC24C64, MQB, NEC MQB, NEC24C32, NEC24C64, NEC24C64_14+, NEC24C64D, NEC24C64_A1, NEC24C64_Q3, RB4, RB8, Magneti Marelli 95320, Magneti Marelli 9S12, Magneti Marelli MEC95320, Magneti Marelli MQB, etc.
Please contact us any questions, technical supports are always here no matter when you bought it.

Rank No. #12

Auto Programmer Auto Diagnostic Tool For XPROG‑M V6.5 ECU Programmer Tool with USB Dongle Safe Convenient ECU Chip Tuning Tool

【Advantage】This ECU programming tool is the only version for XPROG‑M that can decypte new version for CAS4. Including hard disk and USB Dongle, more convenient and secure.
【Upgraded V6.50 Version】Professionally manufactured ECU chip programming tool, using the latest version of for XPROG‑M V6.50, more powerful and stable than previous versions.
【Multiple Authorization】Support AUTH‑0001 for HC05 family authorization, AUTH‑0004 for HC12, 9S12 family authorization, AUTH‑0005 for Texas TMS37 0/TMS374 family authorization.
【Strong Compatibility】Support a variety of programming adapters, such as ADP‑0001 TMS370 PLCC28, ADP‑0002 TMS370 PLCC44, ADP‑0004 for HC05B/X PLCC52, etc.
[High Reliability】ECU chip tuning tool is made of metal material, exquisite and careful workmanship, strictly follows the factory quality control, dependable to use.

Rank No. #13

ECU Programmer For XPROG‑M V5.55 Auto Diagnostic Tool with USB Dongle Auto Programming Tool for Windows 7 Support ADP‑0001 TMS370 PLCC28 ADP‑0003 TMS370 PLCC68 Programming Adapter

Advantage: This ECU programming tool is the only version for XPROG‑M that can decypte new version for CAS4. providing you great using experience.
Secure and Convenient: Comes with USB Dongle and hard disk of the ECU Programming tool set, which will make your programming more safe and protect software.
Strong Compatibility: Has the authorization of various devices, supports a variety of programming adapters, meeting different demands.
Various Authorization: Support AUTH‑0015 MPC5xx authorization, depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size.
For XPROG‑M V5.5.5 Adapters: Support ADP‑0001 TMS370 PLCC28 programming adapter; Support ADP‑0003 TMS370 PLCC68 programming adapter, etc.

Rank No. #14

LAUNCH X431 IMMO Elite 2024 Complete Key Programming Tool with 2 Years Update, All Systems Bi-Directional Control Diagnostic Tool, 39+ Services,CANFD&DOIP (X-PROG 3 Valued $800 Included)

👍【INTEGRATE IMMO & DIAGNOSIS】All-in-One Launch X431 IMMO ELITE key programmer Combines with multi-function of ✅IMMO Programming/Matching Service✅IMMO ECU Replacement & Clone✅Full System Diagnostics✅Bidirectional Control✅39+ Services✅CAND&DOIP✅FCA AutoAuth✅ 200,000+ Car Models(1996-2024)✅ 25 languages etc. 🔺It is a perfect choice for workshops and technicians who demand affordable and powerful IMMO and diagnostic services.
👍【IMMO SERVICE】LAUNCH X431 IMMO ELITE Key Programming Tool Including ✅read password & write to Immobilizer/Engine ECU/Gearbox ECU/EEPROM/MCU chip;clone/reset/code/backup IMMO ECU; key adding/key learning/remote learning, and anti-theft related module replacement functions etc. 📊Support 150+ brands of independent anti-theft matching software for American, European, and Asian car models such as Benz, BMW, VW,etc. 📊IMMO Menus are independent, the operation process is more convenient.
👍【WORK WITH F-REE X-PROG 3(Package Included)】You don’t have to pay $800+ to get an advanced IMMO capabilities. When connected to X-PROG 3, X431 IMMO ELITE can extend its capability to support BMW CAS4 Key functions such as IMMO ECU Read & Write, MC9S12 Encryption Chip Read & Write, IC Card Read & Write, Mercedes Infrared K~y Read & Write, Remote Frequency Detect, and SUPER CLONE functions such as IMMO ECU clone for Gearbox & Engine, read/write 1000+ types of key chips, frequency detection, etc.
👍【🚩BI-DIRECTIONAL & ACTIVE CONTROL】LAUNCH X431 IMMO ELITE Key Fob Programming Tool & Diagnostic Scanner can be used as a full bidirectional scan tool and can access all modules to control subsystem, actuators or component to test its working status and confirm if certain parts needs to be repaired or replaced which save you a lot of time and money! Such as ABS, window, door, solenoids, valves, wipers, headlamp etc.(Note: Functions NOT universal, please contact us check compatibility. )
👍【🚩39+ HOT RESET SERVICES-KEEP UPDATING】Launch X431 IMMO ELITE automotive scanner diagnostic tool supports common special functions for most models, such as service lamp reset, throttle matching, steering angle reset, brake pad reset, tire pressure reset, ABS bleeding, battery matching, injector coding, Gearbox Relearn, Adblue Reset, Transport Mode, and Windows Calibration and ECU Reset, FRM Match, Clutch Match, Gateway Module Data Calibration, Rain Light Sensor,Turbo Match etc.

Rank No. #15

Demeras ECU Programmer Tool Kit, for XPROG‑M ECU Programming Tool Functional Durable for XP

Advantage: This ECU programming tool is the only version for XPROG‑M that can decypte new version for CAS4. providing you great using experience.
Secure and Convenient: Comes with USB Dongle and hard disk of the ECU Programming tool set, which will make your programming more safe and protect software.
Strong Compatibility: Has the authorization of various devices, supports a variety of programming adapters, meeting different demands.
Various Authorization: Support AUTH‑0015 MPC5xx authorization, depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size.
For XPROG‑M V5.5.5 Adapters: Support ADP‑0001 TMS370 PLCC28 programming adapter; Support ADP‑0003 TMS370 PLCC68 programming adapter, etc.

Rank No. #16

Aoutecen ECU Programmer Tool Kit, English Stable Performance Functional Secure Metal for XPROG‑M V5.55 ECU Programming Tool High Compatibility for XP

Advantage: This ECU programming tool is the only version for XPROG‑M that can decypte new version for CAS4. providing you great using experience.
Secure and Convenient: Comes with USB Dongle and hard disk of the ECU Programming tool set, which will make your programming more safe and protect software.
Strong Compatibility: Has the authorization of various devices, supports a variety of programming adapters, meeting different demands.
Various Authorization: Support AUTH‑0015 MPC5xx authorization, depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size.
For XPROG‑M V5.5.5 Adapters: Support ADP‑0001 TMS370 PLCC28 programming adapter; Support ADP‑0003 TMS370 PLCC68 programming adapter, etc.

Rank No. #17

Socobeta ECU Programmer Tool Kit, Durable for XPROG‑M V5.55 ECU Programming Tool Stable Performance English High Compatibility Metal Functional for 7

Advantage: This ECU programming tool is the only version for XPROG‑M that can decypte new version for CAS4. providing you great using experience.
Secure and Convenient: Comes with USB Dongle and hard disk of the ECU Programming tool set, which will make your programming more safe and protect software.
Strong Compatibility: Has the authorization of various devices, supports a variety of programming adapters, meeting different demands.
Various Authorization: Support AUTH‑0015 MPC5xx authorization, depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size.
For XPROG‑M V5.5.5 Adapters: Support ADP‑0001 TMS370 PLCC28 programming adapter; Support ADP‑0003 TMS370 PLCC68 programming adapter, etc.

Rank No. #18

DAUERHAFT for XPROG‑M ECU Programming Tool, Durable ECU Programmer Tool Kit English Metal with USB Dongle for Windows 7

Advantage: This ECU programming tool is the only version for XPROG‑M that can decypte new version for CAS4. providing you great using experience.
Secure and Convenient: Comes with USB Dongle and hard disk of the ECU Programming tool set, which will make your programming more safe and protect software.
Strong Compatibility: Has the authorization of various devices, supports a variety of programming adapters, meeting different demands.
Various Authorization: Support AUTH‑0015 MPC5xx authorization, depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size.
For XPROG‑M V5.5.5 Adapters: Support ADP‑0001 TMS370 PLCC28 programming adapter; Support ADP‑0003 TMS370 PLCC68 programming adapter, etc.

Rank No. #19

ECU Programmer Tool, For XPROG‑M V6.5 ECU Programmer Tool with USB Dongle Safe Convenient ECU Chip Tuning Tool

Advantage: This ECU programming tool is the only version for XPROG‑M that can decypte new version for CAS4. Including hard disk and USB Dongle, more convenient and secure.
Upgraded V6.50 Version: Professionally manufactured ECU chip programming tool, using the latest version of for XPROG‑M V6.50, more powerful and stable than previous versions.
Multiple Authorization: Support AUTH‑0001 for Motorola HC05 family authorization, AUTH‑0004 for Motorola HC12, 9S12 family authorization, AUTH‑0005 for Texas Instruments TMS37 0/TMS374 family authorization.
Strong Compatibility: Support a variety of programming adapters, such as ADP‑0001 TMS370 PLCC28, ADP‑0002 TMS370 PLCC44, ADP‑0004 for Motorola HC05B/X PLCC52, etc.
High Reliability: ECU chip tuning tool is made of metal material, exquisite and careful workmanship, strictly follows the factory quality control, dependable to use.

Rank No. #20

Autel XP400 PRO 2024 Newest Key Fob Programming Tool, Compatible with MaxiIM IM508/ IM608/ IM608 PRO, Upgraded Ver. of XP400, Read/Write 3000+ Chip Types, Key & Chip Programmer Read Write Learn Keys

👍【ADVANCED VERSION OF XP400】As the 2024 latest key programmer accessory kit, upgraded ver of XP400, XP400 Pro is added with more functionality for BMW, BENZ, as well as more powerful functions on EEPROM, MCU, ECU reading/writing. With the new protocols, XP400 Pro can read/write data of over 3,000 Chip Type to mostly satisfy your needs. NOTE: XP400 Pro+IM508/IM608/IM608 Pro is NOT universally supported. Send VIN to 🚘auteldirect @ outlook .com🚘 to check function before order.
👍【ALL-IN-ONE KEY PROGRAMMER】Autel XP400 Pro Car Key Programmer is designed to work with Autel IM508/ IM608 to expand the IMMO functions, including add a new key, IMMO ECU Reset/Adaption, IMMO ECU Refresh/Coding, Remote Learning, for AUDI Q5/ A4/A5 2015-2017 Key Learning, for VW MQB Key Learning, for BMW FEM/BDC/CAS4 Key Learning and Adaption etc. NOTE: the IMMO functions are not all-vehicle supported, send VIN to 🚘auteldirect@ outlook . com🚘 to check before order.
👍【COMPATIBILE WITH IM508, IM608, IM608PRO】The XP400 Pro programmer is designed to work with IM508, IM608, IM608 Pro key programmer to perform various IMMO Key programmings, key chip programming functions, MCU writing and reading and other key related tasks. Just like the XP400, XP400 Pro also has exactly same programming abilities whether working with IM508 or IM608, IM608 Pro, You can always choose among them and find yourself the suitable collocation.
👍【UNMATACHED COVERAGR OF KEY CHIPS & ECU】Autel XP400 Pro Automotive Key Programmer Tool can read/ write 445 different key chips (newly added support of AM29FXXX series, MB29FXXX series), read/write EEPROM, Read/Write Engine ECU, Read/Write Immobilizer ECU, Read/Write MC9S12 Encryption Chip, Read/Write IC Card, Read/Write Mercedes Infrared Key, Remote Frequency Detect and more.
👍【RISK-FREE PURCHASE】 Autel XP400 Pro programmer is backed by NEW REPLACEMENT or FULL REFUND within 30 Days and it’s protected from defects for 12 Months by US seller. All the functions are not universal compatible, to check functions or any questions, please send VIN(17 digits), brand, model year, and the specific function you need to 🚘auteldirect@ outlook . com🚘 to check compatibility before purchase.

Last update on 2023-08-08 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Xprog M Programmer?

Do you get stressed out thinking about shopping for a great Xprog M Programmer? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Xprog M Programmer, which is why we have assembled a comprehensive list of the greatest Xprog M Programmer available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Xprog M Programmer that you consider buying. Your questions might include the following:

Is it worth buying an Xprog M Programmer?
What benefits are there with buying an Xprog M Programmer?
What factors deserve consideration when shopping for an effective Xprog M Programmer?
Why is it crucial to invest in any Xprog M Programmer, much less the best one?
Which Xprog M Programmer are good in the current market?
Where can you find information like this about Xprog M Programmer?

We’re convinced that you likely have far more questions than just these regarding Xprog M Programmer, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Xprog M Programmer, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Xprog M Programmer. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Xprog M Programmer buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Xprog M Programmer currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Xprog M Programmer has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Xprog M Programmer?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Xprog M Programmer.
Customer Ratings: Number ratings grade Xprog M Programmer objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Xprog M Programmer.
Product Quality: You don’t always get what you pay for with an Xprog M Programmer, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Xprog M Programmer is should be an indication of how long it will work out for you.

We always remember that maintaining Xprog M Programmer information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Xprog M Programmer is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

FAQ:

Q: Which is the latest version of xprog m?

A: XPROG-M V5.60 XPROG M Programmer with USB Dongle,without operation system limitation, software can be installed on Windows XP, windows 7.This is the only version for XPROG-M that can decypte new version BMW CAS4.New authorization was added: AUTH-0025 Authorized 11/4/2014 1. Latest software version: V5.60 2.

Q: Can a usbasp programmer repair an xprog-m?

A: The USBasp programmer is an inexpensive In-Service Programmer (ISP) capable of programming/repairing the XPROG – M without need for external power. They can be found on amazon for as little as $5.98 (buy USBasp from Amazon).

Q: What’s the best way to repair an xprog?

A: The cheapest and easiest way is to cut the connector off one end of the cable supplied with the USBasp and solder the loose ends directly to the solder pads on the XPROG‐M. Once the XPROG‐M is repaired you can simply unplug the cable from the USBasp and put the cover back on, leaving the cable inside.

Q: Which is better xprog V5 or V5.3?

A: 1. Different Version 2. Except SM44-C,SM11-D,SM11 without dongle, replaced by Chips, Others contain dongle 3. No hardware version, different software version with different hardware version, except V5.0, v5.3 others is the same 4. V5.0 Xprog is much more stable than V5.3 Attention: Only Winxp 32bit System Supported.