Contents
20 Best Zooz Fan Switch of 2023 – Romance University
After hours researching and comparing all models on the market, Romance University finds out the Best Zooz Fan Switch of 2023. Check our ranking below.
2,911 Reviews Scanned
- Switch upgrade – Easily replace any standard in-wall switch to remotely turn on or off and adjust speed levels – high, medium and low settings – of a ceiling fan.
- Multiple fans – Wirelessly control and schedule up to two fans from the same in-wall switch
- Dedicated device – The smart control is specifically designed to operate fans speeds. It cannot be use with lighting. However, lights on fans equipped with three wires – typically red, black and white – can be separately controlled using an additional Enbrighten Z-Wave switch or dimmer.
- Range extender – The fan control repeats your Z-Wave signal from your hub or other Z-Wave device to extend your range by up to 150ft. Extended signal range increases your home automation coverage to enhance your control.
- Changeable paddles – White and light almond paddles are included to match your existing switches. Additional colors of the easily changeable paddles are also available.
- SMART DOUBLE SWITCH: Control 2 loads independently with just one Double Switch. Dim the lights using the paddles and turn the connected fan on or off using the relay button (NO SPEED CONTROL for the fan). Control each load remotely from your Z-Wave hub (required, sold separately). Alexa is NOT a Z-Wave hub. Does NOT work with Z-Wave alarm panels like ADT, Ring, Vivint, or Alarm.com. Custom driver required for SmartThings, contact seller for details.
- MULTI-FUNCTIONAL DIMMER: Smooth brightness control for incandescent and LED bulbs (up to 75 Watts of LEDs). Smart bulb ready! Double tap to full brightness, adjustable ramp rate, and dimming speed (your hub needs to support advanced setting input). NO DIRECT 3-WAY, only virtual 3-way available. Contact support for details.
- POWERFUL RELAY: Connect any load up to 15A, including ceiling and exhaust fans for reliable on/off control from the relay button and via Z-Wave. Or use the button for scene control (multi-tap supported by select hubs only, contact support before buying).
- NEW 800 SERIES Z-WAVE LONG RANGE: Boost your network with the latest Z-Wave technology that offers more range and faster signal speed than ever before. Your hub (or home automation software) needs to support Z-Wave Long Range for extra reliable direct-to-hub communication. The Double Switch will act as a signal extender in a traditional mesh network.
- HUB COMPATIBILITY: This is an advanced Z-Wave device and it requires an open Z-Wave hub to display correctly. Works best with Z-Box Hub. It was tested to work well with Home Assistant, Hubitat, and on SmartThings with a custom device driver (please go to Zooz support page for details). NOT supported by Vivint, ADT Pulse, Ring, or Alarm.com
- SMARTER ON/OFF CONTROL: Turn your lights on and off remotely or automatically through Z-Wave. Hub required (sold separately), scroll down for compatibility. Voice control with Z-Wave hub ONLY (will NOT work directly with your smart speaker).
- NEW 800 SERIES Z-WAVE: Boost your network with the latest Z-Wave technology that offers more range and faster communication speed than ever before. This device is Long Range ready so if your hub or home automations software supports Z-Wave LR, get ultra reliable direct communication between the switch and hub. Works as an extender in a traditional mesh. And if you need to troubleshoot connectivity issues, access a built-in range test tool straight from the switch!
- SIMPLE 3-WAY & 4-WAY: Use it with existing on/off switches (NO dimmers) in your 3-way, 4-way, or 5-way set-up, even if load and line are not in the same box. No need for add-on switches, no need to rewire other boxes. Just wire the Zooz in the box with power and neutral (check your boxes before buying).
- FASTER INSTALLATION: The new model is only 1.16" deep so you can easily fit it in a shallow or crowded box. It takes half the time to install the S2 switches in 3-way and 4-way set-ups than for any other Z-Wave solution. Intuitive wiring diagrams are printed in the manual (look for more on Zooz website) and if you need custom instructions, just ask!
- BONUS FEATURES: Scene control (your hub needs to support multi-tap triggers), multicolor LED indicator with adjustable brightness levels (your hub needs to support advanced settings), instant status updates, and replaceable paddles (light almond, brown, and black paddles sold separately).
- HEAVY DUTY Z-WAVE: Add wireless on/off control to large lighting set-ups (up to 600 W LED's), fans, and motors up to 1HP when you connect this switch to your Z-Wave system (hub required, sold separately). The NEW 800 Series chip ensures more range and faster communication. Compatible hub needed for voice control.
- COMMERCIAL APPLICATIONS: This switch can be used as a controller (not a disconnector as one leg remains hot when off) for 240 V and 277 V commercial installations such as well pumps, motors, HVAC equipment, ballast lighting, and more. If complete power disconnection is required for servicing, an external disconnect switch should be installed.
- DIRECT 3-WAY SOLUTION: No add-on switch needed! Works with regular 3-way switches as long as NEUTRAL is present. Wire it just like the ZEN71 model. Please follow the appropriate diagram in the manual and rewire both boxes exactly as shown. Works great as a single pole switch too!
- GREAT FIT: Comes with pigtails for hassle-free installation. Use this smart switch to control lights, fans, switched receptacles, and small motors 120 - 277 V. The classic decora style easily blends in with any interior and can be installed in a standard box with a decora style wall plate (not included).
- SMART SKILLS: Reports status instantly. Remembers and restores on/off status after power failure. Scene control (multi-tap triggers), smart bulb mode, adjustable LED indicator, and more extra features available on hubs that support advanced settings and functionality.
- SMART DOUBLE RELAY: Control 2 loads independently with just one Double Relay. It's perfect for double gang boxes - simply install the relay behind your existing wall switches to make your lights smart. NOT a dry contact relay. Connect to simple on/off or momentary mechanical switches only, NOT to dimmers or other electronic / smart switches. Z-Wave hub required, scroll down for details.
- 3-WAY COMPATIBLE: Unlike many other smart relays, you can use this device to automate 3-way switches as well. Keep your favorite wall control style even if it's a multiway set-up. Always follow the wiring diagrams carefully and make any programming changes if needed when installing this relay.
- EASY INSTALLATION: Pigtail wires for convenient connections. The relay is small enough to fit in the most crowded box, just 1.5" x 1.4" and 0.7" deep. NEUTRAL WIRE REQUIRED (check before buying). The device is ETL certified and conforms with North American safety standards.
- SMART BULB MODE AND MORE: Bring back the switch function to your old switches even when using smart bulbs. The smart bulb mode allows you to control smart bulbs via Z-Wave without cutting power to them when off. Enjoy the new 700 series Z-Wave with powerful features like Z-Wave Long Range, SmartStart, and S2 authenticated security. Your hub or home automation software needs to support this functionality as well.
- HUB COMPATIBILITY: This is an advanced Z-Wave device and it requires an updated Z-Wave hub to display correctly. Zooz devices work best with the Z-Box Hub. The relay was tested to work well with Hubitat, Home Assistant (Z-Wave JS), and is compatible with SmartThings. This product is backed by US based support from Zooz, 7 days a week and a 5-year warranty once registered.
Last update on 2025-07-02 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API
How Do You Buy The Best Zooz Fan Switch?
Do you get stressed out thinking about shopping for a great Zooz Fan Switch? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Zooz Fan Switch, which is why we have assembled a comprehensive list of the greatest Zooz Fan Switch available in the current market. We’ve also come up with a list of questions that you probably have yourself.
Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Zooz Fan Switch that you consider buying. Your questions might include the following:
- Is it worth buying an Zooz Fan Switch?
- What benefits are there with buying an Zooz Fan Switch?
- What factors deserve consideration when shopping for an effective Zooz Fan Switch?
- Why is it crucial to invest in any Zooz Fan Switch, much less the best one?
- Which Zooz Fan Switch are good in the current market?
- Where can you find information like this about Zooz Fan Switch?
We’re convinced that you likely have far more questions than just these regarding Zooz Fan Switch, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.
Potential sources can include buying guides for Zooz Fan Switch, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Zooz Fan Switch. Make sure that you are only using trustworthy and credible websites and sources.
Romance University provides an Zooz Fan Switch buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Zooz Fan Switch currently available on the market.
This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:
- Brand Value: Every brand of Zooz Fan Switch has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
- Features: What bells and whistles matter for an Zooz Fan Switch?
- Specifications: How powerful they are can be measured.
- Product Value: This simply is how much bang for the buck you get from your Zooz Fan Switch.
- Customer Ratings: Number ratings grade Zooz Fan Switch objectively.
- Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Zooz Fan Switch.
- Product Quality: You don’t always get what you pay for with an Zooz Fan Switch, sometimes less, and sometimes more.
- Product Reliability: How sturdy and durable an Zooz Fan Switch is should be an indication of how long it will work out for you.
Romance University always remembers that maintaining Zooz Fan Switch information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.
If you think that anything we present here regarding Zooz Fan Switch is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.
FAQ:
Q: Do Zooz switches work with whole house fans?
A: The Zooz switches, like most other Z-Wave light switches rated for 15A won’t work with whole-house fans specifically because these are pretty powerful at 1/3hp or more. @JDRoberts summed it up well in his post above, your best bet would be to go with a dedicated fan control switch (like the GE) provided that all of the specs check out.
Q: Is there a variable speed fan switch that works with SmartThings?
A: GE and Leviton both make variable speed fan control zwave switches which work with SmartThings. There is also a zigbee device which is popular. You would need to check the specs on those to see if they match your whole house fan. Have you had a chance to look at the fan FAQ yet?
Q: Can I use a zen21 to power a whole house fan?
A: Goodness, if you have any problem with a whole house fan using a Zen21 (on/off only no dimmer) just install a contactor with a 120 volt coil that is rated for whatever current the fan motor requires. That way the only thing the Zen21 supplies power to is the coil for the contactor which is minimal.