20 Best Zooz Z Wave Plus S2 Multisiren Zse19 of 2023 – Romance University

After hours researching and comparing all models on the market, Romance University finds out the Best Zooz Z Wave Plus S2 Multisiren Zse19 of 2023. Check our ranking below.

2,424 Reviews Scanned

Rank No. #1

Zooz Z-Wave Plus S2 Double Switch (White) ZEN30 for Fan and Light Combo (NO Speed Control), Signal Repeater, Hub Required (Works with Hubitat, Wink, SmartThings, Vera)

MULTI-FUNCTIONAL DIMMER: Smooth brightness control for incandescent and LED bulbs (up to 75 Watts of LEDs). Smart bulb ready! Double tap to full brightness, adjustable ramp rate, and dimming speed (your hub needs to support advanced setting input). NO DIRECT 3-WAY, only virtual 3-way available. Contact support for details.
POWERFUL RELAY: Connect any load up to 15A, including ceiling and exhaust fans for reliable on/off control from the relay button and via Z-Wave. Or use the button for scene control (multi-tap supported by select hubs only, contact support before buying).
EASY INSTALLATION: Pigtail wires for convenient connections. No side tabs and just 1.1" deep to fit shallow and crowded switch boxes. NEUTRAL WIRE REQUIRED (check before buying). The device is ETL certified and conforms with North American safety standards.

Rank No. #2

Zooz Z-Wave Plus S2 MultiRelay ZEN16 VER. 2.0 for Garage Doors, Sprinklers, Gas Fireplace; 3 Dry Contact Relays (15A, 15A, 20A); 12-24 V AC/DC or USB C Power; Signal Repeater; Hub Required

3 RELAYS IN 1: Control 3 dry contact relays independently with one MultiRelay. Connect an optional wall switch for manual on/off control (dry contact only, NO voltage on the input side) or use your Z-Wave hub (required, sold separately) for wireless control and automation. Your smart speaker is NOT a Z-Wave hub. Does NOT fully work with Wink or Z-Wave alarm panels like Ring, Vivint, or Alarm.com (R1 control only). Custom edge driver required for SmartThings, go to Zooz support page for details.
VERSATILE APPLICATIONS: Great to automate your garage door (up to 3 doors with just 1 MultiRelay!), commercial garage doors at your business, gas fireplace, sprinklers, doorbell, landscape lights, pool pump, whole house fan, and any 1-240 V device up to 20 A.
DIY INSTALLATION: Power it with a standard USB C cable and a 5V power supply (do NOT use USB chargers or Apple accessories) or 12-24 V AC/DC power source. Wall-mount ready. Power adapter or USB cable NOT included. Jumper wires NOT included. Do NOT power with 110 V! Do NOT apply Voltage to the input (switch) terminals!
RELIABLE Z-WAVE: Comes with the latest S2 security and a powerful Z-Wave Plus signal repeater to boost your network. Remembers and restores on/off status after power failure. Built-in auto-on and auto-off timer available if your hub supports advanced settings. The device is ETL certified and conforms with North American safety standards.
HUB COMPATIBILITY: This is an advanced Z-Wave device and it requires an open Z-Wave hub to display correctly. Works best with the Z-Box Hub. It was tested to work well with Hubitat, Home Assistant, and on SmartThings with a custom device driver (please go to Zooz support page for details). ADT Pulse, Vivint, Wink, and Ring all offer partial control (one relay or all at once instead of individual control for the relays).

Rank No. #3

Zooz 800 Series Z-Wave Long Range S2 Motion Sensor ZSE18 800LR with Magnetic Mount, Works with SmartThings, Z-Box, and Home Assistant

FAST DETECTION: Reports motion to your Z-Wave smart home system reliably. Great solution for light automation and security monitoring. Z-Wave hub required, sold separately. Custom driver needed for SmartThings (go to Zooz Support Portal). NOT supported by Wink, ADT, Vivint, or Alarm.com.
EXTRA FEATURES: Adjustable motion sensitivity and retrigger time. Built-in Z-Wave range test tool for easier network troubleshooting. Vibration reports on SmartThings and other selected hubs.
2 POWER SOURCES: Runs on a single battery for up to a year (depending on traffic and settings) OR on micro USB cable (NOT INCLUDED). Acts as signal extender when included with USB power.
FLEXIBLE DESIGN: Extremely small and light, the sensor sits in a perfectly shaped magnetic mounting base for precise and firm positioning.
CERTIFIED SECURE: Uses the latest authenticated S2 Z-Wave protocol and AES-128 signal encryption. 800 Series Z-Wave Plus chip for longer range and increased battery life. This device is Long Range ready with extra 1000 feet of coverage if your hub supports this feature.

Rank No. #4

Zooz Z-Wave Plus S2 Outdoor Motion Sensor ZSE29

OUTDOOR SENSOR: Introducing the first Z-Wave motion detector created for outdoor use. Monitor activity remotely through your Z-Wave hub (required, sold separately) and automate outdoor lighting based on motion. Keep away from direct rainfall and sunlight.
EASY TO INSTALL: Add it to your system quickly through auto-inclusion and mount it in minutes with just a couple of screws. Power it with batteries (included) or micro USB (cable + adapter sold separately). Program motion time-out and light level trigger by turning the knobs right on the sensor. New version (2.0) comes with advanced settings for motion sensitivity and lux reports if supported by your hub. Motion detection up to 20 feet.
COMPATIBILITY: The sensor works great on HomeSeer, Hubitat, Fibaro, and Vera. Custom device handler needed for SmartThings (go to Zooz support portal or contact seller for instructions). Does NOT work with Wink, Ring, ADT, or other Z-Wave alarm panels. Alexa is NOT a Z-Wave hub (the sensor won't work directly with Echo).
SECURITY: Equipped with the latest authenticated S2 security protocol for encrypted signal and hacker-proof smart home (NOTE: your Z-Wave hub needs to support S2 for this feature to work). Tamper protection and low battery alerts for your peace of mind.
SUPPORT: Questions or issues? Zooz has fast and responsive US-based support to help you with set-up, functionality, and automation routines. Just ask!

Rank No. #5

Zooz 800 Series Z-Wave Long Range S2 USB Stick ZST39 LR, Great for DIY Smart Home (Use with Home Assistant or HomeSeer Software)

READ BEFORE YOU BUY: The Z-Wave stick is for advanced users only, NOT for beginners. You must be comfortable with programming and have expert computer and Z-Wave knowledge to use this device. NVM back-up from 500 or 700 series Z-Wave sticks will brick the device. Do NOT apply NVM backups or firmware updates published outside of the Zooz support portal to avoid bricking the stick and voiding its warranty.
NEW 800 SERIES Z-WAVE LONG RANGE: Take advantage of the latest wireless innovation with Z-Wave Long Range that extends your network coverage up to a mile. NOTE: Your home automation software needs to support the Long Range implementation on the interface side as well as the end Z-Wave device you add to the network for the Long Range functionality to be fully unlocked.
WHAT YOU NEED: This 800 Series Long Range Stick adds Z-Wave Plus and Z-Wave Long Range capability to your DIY smart home set-up. You'll need a dedicated computer (PC, laptop, or Raspberry Pi, sold separately) and home automation software of your choice (not included) to complete the system.
ADVANCED Z-WAVE: Works great with the most popular software like Home Assitant (with JS) and HomeSeer. Supports OTA firmware updates and and all of the latest Z-Wave library commands.

Rank No. #6

Zooz 700 Series Z-Wave Plus Mesh Network Scene Controller ZEN32, White | Z-Wave Hub Required

MAIN BUTTON: Connect a 120 V light fixture (up to 150 W for LED's) to control it via Z-Wave or use the main button for wireless control only with up to 7 button triggers available. Z-Wave hub required, sold separately. NOTE: your smart speaker is NOT a Z-Wave hub.
4 REMOTE BUTTONS: Program each button to activate scenes or other devices in your network for one-touch control of your favorite smart lighting presets. Use the buttons to enter "Away" mode on your way out or to turn off all of the lights before you go to bed with a single click.
DIRECT 3-WAY SOLUTION: No add-on switch needed! Works with regular 3-way switches as long as NEUTRAL is present. Wire it just like the ZEN21/ZEN71 models. Please follow the appropriate diagram in the manual and rewire both boxes exactly as shown. Works great as a single pole switch too!
Z-WAVE HUB COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to allow scene control programming. The ZEN32 Scene Controller is supported by: SmartThings (with a custom handler, instructions included with the product), Hubitat, Home Assistant, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized correctly by your system.
NEW 700 SERIES: This product is built on the latest 700 series Z-Wave chip for better signal coverage than ever, faster communication, with S2 authenticated security and SmartStart for effortless pairing.

SaleRank No. #7

Zooz 800 Series Z-Wave Long Range S2 Dimmer Switch ZEN77 800LR, White | Simple Direct 3-Way and 4-Way Solution (Works with Regular Switches, No Aux Switch Needed) | Z-Wave Hub Required

WIRELESS BRIGHTNESS CONTROL: Turn your lights on or off and dim them with Z-Wave. Works with all of the LED's other dimmers flicker with (120 VAC only, no 0-10V control)! Hub required (sold separately), scroll down for compatibility. Voice control with Z-Wave hub ONLY (will NOT work directly with your smart speaker).
NEW 800 SERIES Z-WAVE LONG RANGE: Boost your network with the latest Z-Wave technology that offers more range and faster signal speed than ever before. Your hub (or home automation software) needs to support Z-Wave Long Range for extra reliable direct-to-hub communication. Each dimmer will act as a signal extender in a traditional mesh network. And if you need to troubleshoot connectivity issues, access a built-in range test tool straight from the switch!
SIMPLE 3-WAY & 4-WAY: Use it with existing on/off switches (NO dimmers) in your 3-way, 4-way, or 5-way set-up, even if load and line are not in the same box. No need for add-on switches, no need to rewire other boxes. Just wire the Zooz in the box with direct connection to power and neutral (check your boxes before buying).
FASTER INSTALLATION: The new model is just 1.16" deep so it will fit a shallow or crowded box much easier! It takes half the time to install the S2 switches in 3-way and 4-way set-ups than for any other Z-Wave solution. Intuitive wiring diagrams are printed in the manual (look for more on the Zooz website) and if you need custom instructions, just ask!
MORE FEATURES: Double tap to go from off to full brightness (single tap to last brightness level - now fully programmable if your hub supports advanced settings). Multi-color LED indicator with adjustable brightness level, night light mode, and many more features to customize the dimmer (if you have access to advanced features from your hub).

Rank No. #8

Zooz 700 Series Z-Wave Plus Smart Relay ZEN51 | Installs Behind Wall Switch Or at The Light | Compatible with SmartThings, Hubitat, and Home Assistant | Z-Wave Hub Required (Sold Separately)

SMART RELAY FOR ON/OFF CONTROL: Install this relay to add Z-Wave to the existing wall switch and keep your favorite switch style and color. The relay output is dry contact for your unique applications outside of lighting but note the input (switch) requires 120 V which makes it perfect for 120 V signal monitoring on sump pumps or motion lights. For a dry contact input device, look up ZEN16.
3-WAY COMPATIBLE: Unlike many other smart relays, you can use this device to automate 3-way set-ups as well. Even if you don't have neutral available at any of the switch boxes, you can always install this relay at the light fixture where you'll have access to power and neutral. Always follow the wiring diagrams carefully and make any programming changes if needed when installing this relay.
EASY INSTALLATION: Pigtail wires for convenient connections. Connect to mechanical on/off or momentary switches only (NO dimmers or electronic / smart switches). The relay is small enough to fit in the most crowded box, just 1.5" x 1.4" and 0.7" deep. NEUTRAL WIRE REQUIRED (check before buying). The device is ETL certified and conforms with North American safety standards.
SMART BULB MODE AND MORE: Bring back the switch function to your old switches even when using smart bulbs. The smart bulb mode allows you to control smart bulbs via Z-Wave without cutting power to them when off. Enjoy the new 700 series Z-Wave with powerful features like SmartStart and S2 authenticated security.
HUB COMPATIBILITY: This is an advanced Z-Wave device and it requires an updated Z-Wave hub to display correctly. It was tested to work well with Hubitat, Home Assistant (Z-Wave JS), HomeSeer and is compatible with SmartThings. This product is backed by US based support from Zooz, 7 days a week and a 5-year warranty once registered.

Rank No. #9

Zooz 700 Series Z-Wave Plus 4-in-1 Sensor ZSE40 (Motion/Light/Temperature/Humidity)

4 SMART SENSORS IN 1: This compact device detects and reports motion, temperature, humidity, and light level to your smart home app. Compatible Z-Wave hub required, sold separately.
NEW 700 SERIES VERSION: The included CR123A battery makes the sensor lasts much longer than any previous version. Updated motion detection allows you to get even quicker activity reports. New Z-Wave chip for better performance.
CUSTOMIZE IT: Choose from 7 levels of motion sensitivity, adjust the motion clear delay time, and pick from 3 different LED indicator modes (your hub needs to support advanced parameter input).
SECURITY FIRST: This sensor is equipped with the latest S2 authenticated security and signal encryption. It's Z-Wave Plus 2 certified to ensure it complies with the highest industry standards. Supports SmartStart inclusion with a unique identifying PIN and QR code.
WILL IT WORK WITH MY HUB? This sensor is NOT supported by Wink, Vivint, ADT Pulse, Qolsys, or other Z-Wave alarm panels. It will work great with open systems like Hubitat, HomeSeer, Home Assistant, and compatible with SmartThings Hub.

Rank No. #10

Zooz Z-Wave Long Range Q Sensor ZSE11 800LR | Motion, Temperature, Humidity, Light (Hub Required)

4 SMART SENSORS: NEW 800LR version with improved hardware. Get motion alerts and monitor temperature, humidity, and light to take your smart home to the next level. Use this device as the trigger to lighting automations, security alerts, or climate control. It's as versatile and as quick to report as can be. Compatible Z-Wave hub required (sold separately).
FLEXIBLE MOUNT: Use the included mounting bracket to adjust the sensor's field of view and ensure precise monitoring. Power the sensor with batteries (included) or a micro USB cable (sold separately). Always use a single power source only. Works as a Z-Wave repeater when included on USB power.
Z-WAVE COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to display multisensors correctly. The ZSE11 Q Sensor is supported by: Z-Box Hub (recommended for Zooz devices), works with SmartThings (with a custom edge driver, instructions included with the product), Hubitat, Home Assistant, Indigo, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized by your system.
MINIMAL DESIGN: Simple and modern look to compliment any interior. This sensor is small enough for discreet monitoring of your home, office, or warehouse space.
MORE SECURITY: Includes S2 Authenticated Z-Wave security and SmartStart for the safest communication possible. Back by a 1-year manufacturer warranty and lifetime tech support.

Rank No. #11

Zooz Z-Wave Long Range Relay ZEN17 800LR for Awnings, Garage Doors, Sprinklers, and More | 2 x NO-C-NC Relays (20A, 10A) | Hub Required (Compatible with Z-Box, Home Assistant, and Hubitat)

2 SMART OUTPUTS: Control 2 dry contact relays independently with one Z-Wave device. Choose from normally closed (10 A) and normally open (20 A) relays to automate almost any electrical device. Connect an optional wall switch for physical on/off control or use your Z-Wave hub (required, sold separately) for wireless control. Your smart speaker is NOT a Z-Wave hub. This product is NOT supported by Wink or Z-Wave alarm panels.
2 SMART INPUTS: Monitor 12-24 V or dry contact inputs separately from the dry contact outputs. Connect analog binary sensors to receive status updates in your Z-Wave hub from a connected door sensor, water sensor, HVAC system, or alarm panel. Use the inputs to trigger the outputs automatically.
AUTOMATE ANYTHING: Add Z-Wave connectivity to up / down DC motors in screens, motorized blinds, or awnings. Perfect to automate your garage door opener (use a single ZEN17 to control up to 2 garage doors independently), commercial gates, gas fireplace, sprinklers, doorbell, outdoor lighting, pool pump, whole house fan, and any 1-240 V device up to 20 A.
QUICK INSTALLATION: Power it with a 12-24 V AC/DC power source or a standard USB C cable (included) and a power supply (sold separately). Wall-mount ready. Jumper wires NOT included. Do NOT power with 110 V!
NEW 800 Z-WAVE: Enjoy better signal coverage and a stronger Z-Wave repeater for your mesh network with the latest 800 series chip. Long Range ready if your hub supports this feature! It comes with S2 authenticated security and SmartStart for easy pairing. Remembers and restores on/off status after power failure. Built-in auto-on and auto-off timer available if your hub supports advanced settings. The device is ETL certified and conforms with North American safety standards.

SaleRank No. #12

Zooz Z-Wave Plus Power Switch ZEN15 for 110V AC Units, Sump Pumps, Humidifiers, and More

POWERFUL PLUG: The only Z-Wave Plug that lets you safely control and monitor heavy-duty 110V appliances from your Z-Wave smart home system. Connect your refrigerator, humidifier or dehumidifier, AC unit, fan, sump pump, or a gas clothes dryer to Z-Wave. NEW: 45 degree angled plug so you can fit 2 Smart Switches in a single receptacle!
POWERFUL Z-WAVE: With built-in Z-Wave Plus signal repeater and range test tool, the Power Switch will boost your whole Z-Wave network while keeping it protected with AES signal encryption.
POWERFUL CONTROL: Monitor energy use of connected appliances in live mode or over time with W, kWh, A, and V reports (your Z-Wave hub needs to support this feature). NOTE: It is NOT a power outage monitor! Quick status reports to the controller and on/off state recovery after power failure.
POWERFUL HARDWARE: Made from high-quality components that will last, even when it's very cold or very hot (14° - 104°F, indoor use only). ETL certified: complies with North American electrical safety standards. Extra-thick flexible cord is perfect for installations with no immediate access to a receptacle.
COMPATIBILITY: Use the Power Switch with any certified Z-Wave gateway for simple on/off control (Wink, Z-Wave alarm panels). Advanced settings and energy monitoring available for open systems only, including Vera, SmartThings (custom device handler required, contact seller first), HomeSeer, and Fibaro Home Center Lite.

Rank No. #13

Zooz Z-Wave Plus 700 Series Titan Water Valve Actuator ZAC36 | Works with Ring Alarm | Compatible with Z-Box, SmartThings

SMART FLOOD PREVENTION: Shut your main water valve automatically when a leak is detected to prevent costly water damage. The Titan actuator installs over your ball valve and comes with a plug-in leak detector to monitor water presence around it. It will work offline with the probe connected directly to the Titan but the device works best when included to a compatible Z-Wave hub (sold separately) for full wireless functionality.
EXTREMELY STRONG: Unlike other retrofit solutions, the Titan is equipped with a powerful motor that opens and closes even the most stubborn valve reliably. It calibrates on each individual valve once installed for optimal performance.
DIY INSTALLATION: You don't need any tools and it takes just a few minutes to mount and calibrate the device. You can use it outdoors too! Follow the steps in the manual and installation video carefully when installing the product. Check your set-up before buying: suitable for 0.5" - 1.25" ball valves only; 3" clearance from the valve center to each side on the pipe, at least 1.25" clearance between the valve handle and the pipe, at least 1" clearance between the pipe and the wall.
Z-WAVE COMPATIBLE: Get the most of your Titan Valve Actuator when you include it to your Z-Wave hub. Program it to shut the water off if water is detected on any of your wireless leak sensors (sold separately) for complete protection. The Titan works best with the Z-Box Hub and is compatible with SmartThings, Hubitat, Ring Alarm, and Home Assistant. Check with Zooz for compatibility before buying if your hub is not listed.
NEW 700 SERIES: This product is built on the latest 700 series Z-Wave chip for better signal coverage than ever and faster communication. Equipped with S2 Security and SmartStart. 5-year extended manufacturer warranty once registered and lifetime tech support included.

Rank No. #14

Zooz 700 Series Z-Wave Plus Mesh Network Remote Control & Scene Controller ZEN34 (Battery Powered), White | Z-Wave Hub Required

REMOTE CONTROL: Use the paddles like remote control buttons to trigger scenes and turn other smart home devices on or off. Z-Wave hub required, sold separately. NOTE: your smart speaker is NOT a Z-Wave hub.
ANYWHERE SWITCH: Install it in a regular switch box or stick it to any flat surface for convenient and wire-free control. This is a battery-powered device with a magnetic base that allows a flexible installation anywhere you always wanted another light switch (no electrician needed!).
Z-WAVE HUB COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to allow scene control programming. The ZEN34 is supported by: Z-Box Hub (recommended), works with SmartThings (with a custom driver, instructions included with the product), Hubitat, and Home Assistant. Please do NOT buy this device if your hub isn't listed here, it will not be recognized correctly by your system.
NEW 700 SERIES: This product is built on the latest 700 series Z-Wave chip for better signal coverage than ever, faster communication, with S2 authenticated security and SmartStart for effortless pairing.

Rank No. #15

Wemo F7C030fc Light Switch, WiFi enabled, Works with Alexa and the Google Assistant

Wi-Fi connectivity lets you control your lights from anywhere
Free Wemo app allows you to schedule your lights
Away Mode turns on and off lights for extra security when you're away
Compatible with Alexa, Google Assistant, Nest and more

Rank No. #16

eXtremeRate Clear Octagonal Gated Sticks Faceplate Backplate Handles, DIY Replacement Grip Housing Shell Cover for Nintendo Switch Pro Controller - Controller NOT Included

Custom designed replacement front back housing and handles to perfectly fit for Nintendo Switch Pro controller. Ergonomic octagonal gated sticks design can greatly improve the joystick function, perfect for FTG games. Precision cut to work exactly like the original shell
Unique replacement case to add much more personality to your Switch Pro. The replacement housing will make your Switch Pro controller distinct when playing with friends, no more boring standard color
The installation process requires customer with moderate electronic installation experience. Kindly note that the installation of this shell will void the warranty of your Switch Pro. Get installation video guide on YouTube by searching "ExtremeRate Replace The Full Shell for Switch Pro Controller Guide" or "nrp3riEt7aA"
Made of premium ABS material, durable and practical; The clear color looks amazing
Package includes 1* faceplate, 1* backplate, 2* handle grips, 1* cross screwdriver, 25* spare screws. (Note: The controller, buttons and other parts are not included.)

Rank No. #17

Zooz 800 Series Z-Wave Long Range Open|Close XS Sensor ZSE41 800LR for Door, Window, and Gate Monitoring. Hub Required (Sold Separately). Compatible with SmartThings, Hubitat, and Ring Alarm.

FAST AND RELIABLE: Get notified on your Z-Wave hub's app or via text when a door or window is opened for easy DIY security monitoring. Use on safety gates, cabinet doors, patio doors, and more. Z-Wave hub required, sold separately (check below for compatibility).
EXTRA SMALL: Perfect for discreet mounting with a slim profile to fit most frames and surfaces.
OUTDOOR CASE AVAILABLE: The sensor is coated with protective rubber oil against corrosion and water leak damage. A splash is fine but if you want to install it outdoors, you'll need a dedicated waterproof case (sold separately, ask Zooz about it).
Z-WAVE COMPATIBILITY: Works best with the Z-Box Hub. Supported by open Z-Wave systems only, including Home Assistant, HomeSeer, Hubitat, Vera, and Ezlo hubs. Compatible with SmartThings and Ring Alarm (no access to advanced settings). NOT supported by alarm panels like Vivint, Qolsys, 2GIG, ADT, or others.
SMART SECURITY: 800 series Z-Wave chip with longer range, better battery life, and the highest level of S2 security with SmartStart for fully encrypted communication. If your hub supports ZWLR, you'll benefit from ultra reliable wireless communication and up to 1300 feet of range. Covered by a 5-year extended warranty once registered and backed by lifetime tech support 7 days a week.

Rank No. #18

Aeotec Siren 6, Z-Wave Plus S2 Enabled Zwave Siren Safety Speaker, Wall-Mounted Sound & Light Security Intruder Zwave Alarm with Backup Battery, 110dB

Aeotec Zwave Siren 6 is your home smart indoor siren. Built with Z-Wave Plus S2 to be a smart home security siren, it features a 110dB speaker coupled with 1,000 lumens visual light alert strobe. Can be used as siren for security alarm, smoke sensor, and CO sensors via Z-Wave
Pre-loaded 6 security sounds, 8 safety sounds, and 30 tones in total. Each tone is volume adjustable between 80dB and 110dB
4-hour backup battery lets Siren 6 work even when power is turned off
Can also be used as doorbell by pairing with Aeotec Button. Can use up to 3 zwave buttons, each sold separately
5-Compatible with certified Z-Wave gateways including: Samsung SmartThings, HomeSeer, Open Z-Wave, Zipabox and more(Not compatible with Vera). Z-Wave Plus and Z-Wave S2 certified for quicker response time, better wireless range up to 490 feet in open space, and additional wireless security encryption. Z-Wave Plus certification number: ZC10-19046417.

Rank No. #19

Zooz 700 Series Z-Wave Plus Tilt | Acceleration XS Sensor ZSE43 for Garage Door and Gate Monitoring. Hub Required (Sold Separately). Compatible with SmartThings, Hubitat, and Home Assistant Z-WaveJS.

TILT SENSOR: Monitor your garage doors or gates through the classic vertical or unique horizontal tilt movement (do NOT use for swinging doors or gates). Get notified when the door is open unexpectedly. Z-Wave hub required (sold separately, scroll down for compatibility).
SHOCK SENSOR: This device will also report acceleration for more creative security monitoring scenarios like cabinet or glass safety.
EXTRA SMALL & SECURE: Perfect for discreet mounting with a slim profile to fit most frames and surfaces. It's only 1.9" x 1". 700 series Z-Wave chip with longer range, better battery life, and the highest level of S2 security with SmartStart for fully encrypted communication.
OUTDOOR CASE AVAILABLE: The sensor is coated with protective rubber oil against corrosion and water leak damage. A splash is fine but if you want to install it outdoors, you'll need a dedicated waterproof case (sold separately, ask Zooz about it).
Z-WAVE COMPATIBILITY: Supported by open Z-Wave systems only, including Home Assistant, HomeSeer, and Hubitat hubs. Compatible with SmartThings. NOT supported by alarm panels like Vivint, Qolsys, 2GIG, ADT, Ring Alarm or others. If the sensor isn't displaying or reporting correctly for you, it's likely that your hub doesn't support the latest 700 series Z-Wave devices. This sensor is Z-Wave Plus certified. Got a problem? Tech support is here to help you 7 days a week!

Rank No. #20

PRO Version ZWave Water Sensor: Aeotec Water Sensor 7 Pro, with Flood, Temperature, Humidity Sensor, SmartThings Sensor Compatible, Z-Wave Plus, S2, SmartStart, ZWave hub Required

Zwave Water Leak Detector: Get instant Z-Wave hub notifications at the first sign of as little as 0.02” of water or moisture to prevent leaks and flooding. Protect your home from water damage.
Z-Wave Temperature and Humidity Sensor: used to manage heating, cooling, and bathroom ventillation.
Aeotec Gen7 with Z-Wave 700 series chip: 50% faster wireless communication, enhanced security, and 3 years of battery life. Make your home really intelligent and safe
Home automation: compatible with certified Z-Wave gateways including AutoPilot, Hubitat, Fibaro Home Centre, Vera, HomeSeer, Zipato, etc.. Z-Wave certification no. ZC12-20080098.

Last update on 2023-08-06 / Affiliate links / Product Titles, Images, Descriptions from Amazon Product Advertising API

How Do You Buy The Best Zooz Z Wave Plus S2 Multisiren Zse19?

Do you get stressed out thinking about shopping for a great Zooz Z Wave Plus S2 Multisiren Zse19? Do doubts keep creeping into your mind? We understand, because we’ve already gone through the whole process of researching Zooz Z Wave Plus S2 Multisiren Zse19, which is why we have assembled a comprehensive list of the greatest Zooz Z Wave Plus S2 Multisiren Zse19 available in the current market. We’ve also come up with a list of questions that you probably have yourself.

Romance University has done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Zooz Z Wave Plus S2 Multisiren Zse19 that you consider buying. Your questions might include the following:

Is it worth buying an Zooz Z Wave Plus S2 Multisiren Zse19?
What benefits are there with buying an Zooz Z Wave Plus S2 Multisiren Zse19?
What factors deserve consideration when shopping for an effective Zooz Z Wave Plus S2 Multisiren Zse19?
Why is it crucial to invest in any Zooz Z Wave Plus S2 Multisiren Zse19, much less the best one?
Which Zooz Z Wave Plus S2 Multisiren Zse19 are good in the current market?
Where can you find information like this about Zooz Z Wave Plus S2 Multisiren Zse19?

We’re convinced that you likely have far more questions than just these regarding Zooz Z Wave Plus S2 Multisiren Zse19, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Zooz Z Wave Plus S2 Multisiren Zse19, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best-possible Zooz Z Wave Plus S2 Multisiren Zse19. Make sure that you are only using trustworthy and credible websites and sources.

Romance University provides an Zooz Z Wave Plus S2 Multisiren Zse19 buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Zooz Z Wave Plus S2 Multisiren Zse19 currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

Brand Value: Every brand of Zooz Z Wave Plus S2 Multisiren Zse19 has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
Features: What bells and whistles matter for an Zooz Z Wave Plus S2 Multisiren Zse19?
Specifications: How powerful they are can be measured.
Product Value: This simply is how much bang for the buck you get from your Zooz Z Wave Plus S2 Multisiren Zse19.
Customer Ratings: Number ratings grade Zooz Z Wave Plus S2 Multisiren Zse19 objectively.
Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Zooz Z Wave Plus S2 Multisiren Zse19.
Product Quality: You don’t always get what you pay for with an Zooz Z Wave Plus S2 Multisiren Zse19, sometimes less, and sometimes more.
Product Reliability: How sturdy and durable an Zooz Z Wave Plus S2 Multisiren Zse19 is should be an indication of how long it will work out for you.

Romance University always remembers that maintaining Zooz Z Wave Plus S2 Multisiren Zse19 information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Zooz Z Wave Plus S2 Multisiren Zse19 is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

20 Best Zooz Z Wave Plus S2 Multisiren Zse19 of 2023 – Romance University

How Do You Buy The Best Zooz Z Wave Plus S2 Multisiren Zse19?

Related Post: